Database Users

wizard qwerty uk k'board layout help

i have a wizard runing qtek-wwe rom qwerty keys work ok but not the symbols they seem to have shiften 1 space left the (s has !) (the d has @) ect i would like uk layout please, is there a quick fix i have seared and forum for some reg hacks but these dont seem to work help please

mrbubble said:
i have a wizard runing qtek rom qwerty keys work ok but not the symbols they seem us i would like uk one please, is the a quick fix i have seared and founf some reg hacks but these dont seem to work help please
Click to expand...
Click to collapse
Did you install a US ROM? If so you should be able to fix this by installing a WWE ROM I think.

Yes you can fix it, its a simple registry entry, in the
HCKU\ControlPanel\keybd entry
add a DWORD called LOCALE with a value of 0809
Regards
Riptos

Multiple Languages?

Hey everyone! I have the HTC Touch Dual with 20 keys, but I have a problem. See, I've been living here in Spain for about 4 years now, and I had a blackberry prior to this purchase, with a full qwerty keyboard, so I had no need to change between languages and such. So my question is if there is a way to have both dictionaries (English + Spanish) together. I saw a friend with his iphone, he had both languages installed at once. I'm wondering if there's any way to use the predictive writing tool while having it look through 2 languages at once. Is that possible? Thanks!
Kent.

just a thought, but maybe merging the two languages in the xt9 language file?

OMG! Do you know how to do this!? Is there a way to do this!? Wooo you just got me sooo excited

any results?
Hi guys, have you tried copying two different language files into one? Does it slow down the XT9 recognition (memory...)?
If you have identified the location and name of the files to merge, plz let me know.
Thx.

justanickname said:
Hi guys, have you tried copying two different language files into one? Does it slow down the XT9 recognition (memory...)?
If you have identified the location and name of the files to merge, plz let me know.
Thx.
Click to expand...
Click to collapse
So far nothing. No one has been able to help. I'm still asking around.

I need exactly the same , merge french & english

I just put in 14 in 1 language XT9 pack, and it works great, but still a pain when I have to switch languages everytime I want to type in a different language. Is there a way to remove languages that you don't want?

zkyevolved said:
I just put in 14 in 1 language XT9 pack, and it works great, but still a pain when I have to switch languages everytime I want to type in a different language. Is there a way to remove languages that you don't want?
Click to expand...
Click to collapse
Can you briefly explain what you did?
If I unterstand correct, you _did_ copy multiple files into one (which and where?) and it seems to be working for you.
So why do you have to switch languages now? Shouldnt you be able to simply type and the T9 file (containing multiple language data bases) recognises possible matches from either of the contained languages?
2)
Proposal: Is there a chance to write a brief macro toggling between languages and make it configurable by a simple GUI to choose the language files to switch?
-> any takers for this challenge? Thx.

justanickname said:
Can you briefly explain what you did?
If I unterstand correct, you _did_ copy multiple files into one (which and where?) and it seems to be working for you.
So why do you have to switch languages now? Shouldnt you be able to simply type and the T9 file (containing multiple language data bases) recognises possible matches from either of the contained languages?
2)
Proposal: Is there a chance to write a brief macro toggling between languages and make it configurable by a simple GUI to choose the language files to switch?
-> any takers for this challenge? Thx.
Click to expand...
Click to collapse
Well, I just found that 14 in 1 cab, installed it, and restarted. Worked great! And STILL Works great! But now I have 14 languages I'd like to get rid of 12 of them Any ideas?
What I was saying is that what I have to do is click and hold the asterisk, bring up the menu, click XT9 Languages and then click the language I want. I wish there was a way to do it faster.

Adding or changing xT9 dictionary?

I've got english ROM but would like to be able to use some other dictionaries (in addition or instead of...) like norwegian and/or swedish.
I've been searching this forum for "add xt9 dictionary", also under other WM6.x devices like Diamond but have come up with nothing useful.
It seems like HTC Diamond and others use "eT9" dic's and the registry keys referred to does not exist in X1
HTC= HKLM\Software\Tegic\....
X1=HKLM\Software\XT9 Input Method\...).
The only regkey that exists in my X1 under XT9 Input Method is "IMEmode=0".
- Anyone with a swedish ROM that could check their registry settings here?
- Does anyone now of a way to add or change xT9 dictionary on X1?
- Anyone with a swedish ROM who could send/PM me the "mssp2.lex" file located on root in folder "Windows"?

I have the Swedish rom, i also only have IMEmode 0 there.

OK, if you have the swedish ROM you also have the swedish dictionary. Could you pls copy and PM or e-mail me the "mssp2.lex" located in folder "Windows"?

Anybody with a swedish ROM who could send me the "mssp2.lex" file located in folder Windows\ ??
If so, pls pm me and I´ll send you my e-mail address.

http://wiki.xda-developers.com/index.php?pagename=Changing_Device_Language
I'm not sure but this site might help you?

Thx for the reply but it did not hlp me solve the problem. The thread is not applicable for Xperia. Neither of the mentioned registry keys are on the Xperia.
However it did help me in realizing that the *.lex file would not solve my problem sinse it apparently is only applicable for spellchecking (?) and is not used for the predictive text input appearing when messaging (?).
...so the question is now back to what the thread says: how to change or add a xT9 dictionary to Xperia??
Looking through some other threads for other (HTC) devices on this forum most of them refer to a "...Tegic\eT9..." path in registry which also does not seam applicable for Xperia.
All I have in registry is HKLM\Software\XT9 Input Method\IMEmode = 0.
Which files controls xT9 ??

An up for this problem... I am unable to change the dictionary used by the hardware keyboard. Actually I have Jack ROM, but would like to use my own language dictionary... any useful idea?!?!

HELP - Keyboard issue

Hello XDA
I have just noticed that the "?" key (FN P) is not typing the ? but an ";". Does anyone have any ideas?
Thanks

Fn P on my UK QWERTY X1 has ; on the keyboard. ? is at the bottom and doesn't need the Fn key.

Wierd,
Mine has the ? mark on the P key in blue. There must be a setting then for this somewhere in the OS

Austrian QUERTZ has the "?" on "Fn"+"P" and the ";" is "SHIFT"+","
Seems you have an English ROM installed but you would need a German one.

ok my keyboard is:
"?" on "Fn"+"P" the ";" is on "SHIFT"+"," the "+" is on "Fn"+"N". Any ideas

You have flashed UK rom on non UK device, that is your problem. Most of non UK X1 have localized keyboards and they will work ok only with org language rom. The only way for you is to find keyboard driver and swap it to your X1 orginal language.

Ok I just did a hard reset and it flashed itself. So I need to reload it somehow?

ell82 said:
You have flashed UK rom on non UK device, that is your problem. Most of non UK X1 have localized keyboards and they will work ok only with org language rom. The only way for you is to find keyboard driver and swap it to your X1 orginal language.
Click to expand...
Click to collapse
Are you kidding me?
Does not changing CurLang value work on X1?
Go to HKLM\HARDWARE\DEVICEMAP\KEYBD and there find CurLang value. You need to open the file and change the 1033 to the value of your device. I do not have the values here, but they are on XDA, please search the forums for the answer.

Where is your device from?

I assume that Austrian and German layouts are the same.
Go to the key I posted above and change it to 1031, close your reg editor and there probably is not even soft reset needed...
EDIT: If that gives the wrong layout try 3079 after that. (I do not know of this code is supported)

Under the device settings it shows GENERIC_UK... Other then that no idea, I do know the manuals came in some other language.. so not sure.

Use registry editor program, like the free Total Commander and do as I posted earlier.
Go to HKLM\HARDWARE\DEVICEMAP\KEYBD and there find CurLang value. You need to open the file and change the 1033 on that to 1031. '
(Note that I am guessing that your device has the German QWERTZ layout?)

Loco5150 said:
Use registry editor program, like the free Total Commander and do as I posted earlier.
Go to HKLM\HARDWARE\DEVICEMAP\KEYBD and there find CurLang value. You need to open the file and change the 1033 on that to 1031. '
(Note that I am guessing that your device has the German QWERTZ layout?)
Click to expand...
Click to collapse
I just tested this and it does work. Changing CurLang to 1031 changes the layout to QWERTZ and "?" is under "P" etc... Soft reset needed after change.
People please use the SEARCH on the boards. All these type of problems most likely have been addressed in other devices.

Loco5150
I got total commander installed, where do I find the registry at? Currently I am seeing a directory listing.

go to \\plugins, there is registry folder...

Well we are close! now the z and the y keys are backwards. Any other numbers to try? Thanks!

Ok then your device is not with German layout?
Clownzer said:
I do know the manuals came in some other language.. so not sure.
Click to expand...
Click to collapse
What country is this device from, that would help you know... Did you bought it used?

Bought it brand new from someone on Amazon, not sure what country it was from other than the booklets where not in English.

Clownzer said:
Bought it brand new from someone on Amazon, not sure what country it was from other than the booklets where not in English.
Click to expand...
Click to collapse
Best thing would be that you find out what country your device is from, the booklets should give you that info...
I think that you have bought a device that had a English rom installed by the seller and he did the right localization for it. Now that you did a hard reset everything went back to the original rom setup.
This will be no problem when you find out where your device is from.
Does it have a carrier branding?

Ok it looks like the manuals are in Swedish Language... Viktig Information is written on the main manual.
Also
Sweden address on the back of one of than manuals

[CAB] Chinese support(CHS font only now) for Artermis ROM [UPDATED 02-May-2010]

Hi all,
This post is about getting the orginal WWE Asia HTC HD2's font into Artermis ROM.
1) Install the attached cab
2) Soft reset
Note 1: I only tested in fresh ROM environment, which is V10,V11
Note 2: These files are taken from RUU_Leo_hTC_Asia_WWE_1.66.707.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
One step closer to stock ROM "Philosophy"

ksk622 said:
Hi all,
This post is about getting the orginal WWE Asia HTC HD2's font into Artermis ROM.
I have tried various cabs before like ricky, RobRedbeard- LIA, sunglobe etc... and i have no idea what are the cabs actually doing. some of them even replaced the original wince.nls, create some junk reg keys, make chinese font in some app overlapping...
Here is the safer technique to get chinese font support without messing around with the system files and registry.
1) Download the attached zip file and extract to your storage card
2) Copy UCSH00B-gray.ttf to \windows
3) Import this registry file, SystemLink.reg
4) Soft reset
Note 1: I only tested in fresh ROM environment, which is V10
Note 2: These files are taken from RUU_Leo_hTC_Asia_WWE_1.66.707.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
One step closer to stock ROM "Philosophy"
Click to expand...
Click to collapse
great work on the chinese font!
is there any way of getting the ezInput keyboard from 1.66 asia ROM to work on other custom ROMs as well? thanks

alexnvidia said:
great work on the chinese font!
is there any way of getting the ezInput keyboard from 1.66 asia ROM to work on other custom ROMs as well? thanks
Click to expand...
Click to collapse
I am looking into this as well. will try my luck with the new version of "touch input".

ksk622 said:
I am looking into this as well. will try my luck with the new version of "touch input".
Click to expand...
Click to collapse
looking forward to your findings mate. cheers

temporary solution
I just tested with artermis v10 with the following
http://forum.xda-developers.com/showthread.php?p=6295918#post6295918
steps
1) download the attachment then extract all the files to a temp folder on your desktop
2) go files folder, copy & paste EzInputSettings.exe.0804.mui then rename the new file to EzInputSettings.exe.0409.mui
3) copy all the dll files from those folder name end with .ddl to parent folder (../files). you can skip HTCSipSrvc.dll
4) now go to your device, change SIP to other. change home to titanium
5) go to /windows folder and rename those dll file with same name you modified on your desktop temp folder to xxxx.dll.old( total is 11 files)
6) copy the temp folder on your desktop to your HD2
7) use total commander to move all the files inside files folder to /windows, replace all the dll & files (must make sure no overwrite error)
8) import app.reg
9) soft reset
Finally stock rom chinese support in WWE rom
Now just waiting for a kind soul to help to convert this into cab
UPDATE: Only pinyin and stroke is working...
ABOVE SOLUTION IS UNSUPPORTED NOW

I was reading somewhere that wince.nls needs to be updated to support chinese input???

Leechoonhwee said:
I was reading somewhere that wince.nls needs to be updated to support chinese input???
Click to expand...
Click to collapse
Artermis ROM is using the global version of wince.nls, thats why make this possible. Eg: we can see the 5 chinese legions in setting....

+1
Great work =D
Is it possible to make something similar using the 1.72 HKCSL_WWE stock ROM for traditional Chinese character display and input?
Thanks!

i am also very interest in this ,anyone can help to have a CAB?

yes please
+1
this would be a big help to a lot of users!
including me

global wince.nls
ksk622 said:
Artermis ROM is using the global version of wince.nls, thats why make this possible. Eg: we can see the 5 chinese legions in setting....
Click to expand...
Click to collapse
can you please upload a copy of the global wince.nls for those of us who arent on the artemis rom?
thanks
HPD

hyperpsychodreamer said:
can you please upload a copy of the global wince.nls for those of us who arent on the artemis rom?
thanks
HPD
Click to expand...
Click to collapse
Here it is...

ksk622 said:
Here it is...
Click to expand...
Click to collapse
i replaced the wince.nls, but nothing happened. i still dont get the 5 chinese regions in regional settings. also, can you check if your first post method works for google maps 4.1? in google maps, under settings, speech language, there is an option for mandarin. all i get are square boxes.. it should write chinese language, in mandarin of course. any fix for this?

alexnvidia said:
i replaced the wince.nls, but nothing happened. i still dont get the 5 chinese regions in regional settings. also, can you check if your first post method works for google maps 4.1? in google maps, under settings, speech language, there is an option for mandarin. all i get are square boxes.. it should write chinese language, in mandarin of course. any fix for this?
Click to expand...
Click to collapse
Maybe try the following:
- rename the existing wince.nls to wince.nls.old then copy the new one.
- inside your registry... remove this key [HKEY_LOCAL_MACHINE\Software\Microsoft\FontLink\SystemLink] then import the reg file from 1st post, if everything ok, only 5 entries will be recreated as following
"HelveticaNeue LT 35 Thin"="\\windows\\UCSH00B-gray.ttf,AR CrystalHeiU20 Bold(gray);\\windows\\tahoma.ttf,Tahoma"
"Helvetica Neue OTS"="\\windows\\UCSH00B-gray.ttf,AR CrystalHeiU20 Bold(gray);\\windows\\tahoma.ttf,Tahoma"
"Courier New"="\\windows\\UCSH00B-gray.ttf,AR CrystalHeiU20 Bold(gray)"
"Tahoma"="\\windows\\UCSH00B-gray.ttf,AR CrystalHeiU20 Bold(gray)"
"AR CrystalHeiU20 Bold(gray)"="\\windows\\tahoma.ttf,Tahoma"
remember to soft reset ... then enjoy the new font

alexnvidia said:
i replaced the wince.nls, but nothing happened. i still dont get the 5 chinese regions in regional settings. also, can you check if your first post method works for google maps 4.1? in google maps, under settings, speech language, there is an option for mandarin. all i get are square boxes.. it should write chinese language, in mandarin of course. any fix for this?
Click to expand...
Click to collapse
replacing the wince.nls directly doesn't work. You need to use it with reloadnls.exe which will have to be in the startup folder. do a search for it and you will find your answers. I used to write a thread for this as well, so you can try to search for it.

GiantMuffinMan said:
Great work =D
Is it possible to make something similar using the 1.72 HKCSL_WWE stock ROM for traditional Chinese character display and input?
Thanks!
Click to expand...
Click to collapse
that would be easy, if you guys really want it, I mean the traditional Chinese display and supports,
I may make 2 cabs tonight
cab 1: CHT display (mingliu.ttc, pretty fonts) and input (from Samsung HK keyboard),
cab 2: same as the above but added wince.nls with Chinese regions.
please pm to me to show your request in order to let me work on it ( I am currently using the second method )

wow~~thanks!!
it really helps~~
great work great work!!!

dioxda2 said:
that would be easy, if you guys really want it, I mean the traditional Chinese display and supports,
I may make 2 cabs tonight
cab 1: CHT display (mingliu.ttc, pretty fonts) and input (from Samsung HK keyboard),
cab 2: same as the above but added wince.nls with Chinese regions.
please pm to me to show your request in order to let me work on it ( I am currently using the second method )
Click to expand...
Click to collapse
THat would be greeaaat....

Hi Dioxda2,
i ever try your 2 roms.
those are only to display chinese right? not enter chinese right?
thanks in advance for clarifying
jack

Hi
I need hand writing for Chinese input，Can you dump your chinese version ROM and share with us?
Thank you