Hi
I need to install .Net CF 3.5 to run an application.
Alas, I always get an errormessage the installation didn't work.
I need to free some space...
there is also something about an (I think) errror 2
What is wrong?
Thanks
excuse me but I don't write in english...
HKey_Local_Machine - Software - Microsoft - .NETCompactFramework
click on 2.0.7045.00 e cambiare il valore da 1 a 0 (gli si dice in pratica non usare questo)
click on 3.5.7283.00 e cambiare il valore da 0 a 1 (cioè usa questo)
Thanks
on my system there is no:
3.5.7283.00
Any help?
so your saying you cant install .net CF 3.5 is that correct!
or you cant set your framework from 2 to 3.5!
cos the second post is applicable only after youv installed CF 3.5
I get the errormessage after I want to install 3.5..
Dono if I ever had 2.0
hmm! dont know what the problem might be!
most likely you alredy have CF2.0 as standard
the first thing i usually install is 3.5 after a hard reset it 3.5. ive never had any probs
the server wnt let me upload my CF 3.5 cab file
ive attached a .net config software but without installing CF3.5 its not much use (saves changing the resigtry manually thats all).
try installing after a hard reset!
cant help you there sos pal! maybe some one else can
with a hard reset I loose all programms and data don't I??
Don't feel like doing that
Related
Does anyone have simple instructions on how to install Compact Framework 3.5 on Leo? I need it for BsB Tweaks.
Gargamel29 said:
Does anyone have simple instructions on how to install Compact Framework 3.5 on Leo? I need it for BsB Tweaks.
Click to expand...
Click to collapse
Download it from the microsoft website..
connect your phone to the PC via active sync..
Double click the file on your PC.. it will install it on the PC an dthen simultaneously on the Phone.. follow the instructions shown on the phone..
This worked for me:
http://pocketnow.com/how-to/tutorial-how-to-upgrade-to-microsoft-net-compact-framework-35
13. Install Compact Net Framework 3.5 to Make Old Apps Work Again
Some apps you may have used on another phone will not work on the Leo unless you install Compact Net Framework to your phone. Download the cab from the following link and install to Device only - not Storage Card and then reset. http://justpctech.com/PPC/NETCFv35.wm.armv4i.cab Also make sure your phone is using the 3.5 as default and not 2.0. Go here: HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5. Also some apps need the file NETCFv35.Messages.EN.wm. Here is the link to download the file: http://www.mediafire.com/?ommgm3gz13z Install the NETCFv35.Messages.EN.wm.cab to device after you installed NETCFv35.wm.armv4i.cab and reset./QUOTE]
thats a quote from this thread : http://forum.xda-developers.com/showthread.php?t=583638
Click to expand...
Click to collapse
Thanks for this. I used the 2 .CAB files which I obtained from the modaco site (still haven't installed a registry editor - my bad).
It worked without issue (apart from when I needed to figure out how to soft reset my HD2!).
I've got BSB tweaks working now.
I previously only installed 1 of these cabs, but i guess there no harm installing both if they serve different purposes.
Problems installing Net Framework
Hi Guys. I've got myself into a bit of a problem here. I downloaded an app. When I came to run it, it crashed saying I needed to install net framwork. OK, so no problem as I thought I had it installed already. I checked my installed programs and I could see it was already installed.
So, I uninstalled the app it and tried to reinstal the cab version of Net Framework. But, as soon as it starts the installation process, I get an error message saying that it's already installed in ROM. I rebooted the device thinking that would sort it, but it didn't,
Worst of all, now a load of other programs don't work because they can't find net framework 3.5
Ooo errr - anyone got any suggestions?
Thanks
Steve
check the registry and follow above directions, make sure it's pointing to 3.5 if already installed and not 2.0
net Framework
Hiya
Thanks for replying. Yes, I did follow the above instructions and yes, I have made sure that the registry is pointing to the correct version before I posted my query.
Any other thoughts
Steve
Hello,
i have a massive problem with my htc hd2. In order to use bsb tweaks 1.6 and other software i need netcf 3.5. The problem ist, that every time i try to install netcf3.5 wether via .cab or active sync using the pc programm it says "installation failed". When i install BSB Tewaks it installs and says that it can´t run with that version of netcf. Obviuously there seems to be an older version installed which hinders the new one from installing. This problem occurs even after rom update and hard reset. I ran out of idears and am totally despaired.
If someone can help me with that i´d be more than thankfull because i tryied everythin from sk tools cleaning registry after rom installation to taking out the memory card and Sim card and so on..
HELP PLEASE (
Lovrock said:
Hello,
i have a massive problem with my htc hd2. In order to use bsb tweaks 1.6 and other software i need netcf 3.5. The problem ist, that every time i try to install netcf3.5 wether via .cab or active sync using the pc programm it says "installation failed". When i install BSB Tewaks it installs and says that it can´t run with that version of netcf. Obviuously there seems to be an older version installed which hinders the new one from installing. This problem occurs even after rom update and hard reset. I ran out of idears and am totally despaired.
If someone can help me with that i´d be more than thankfull because i tryied everythin from sk tools cleaning registry after rom installation to taking out the memory card and Sim card and so on..
HELP PLEASE (
Click to expand...
Click to collapse
you have to use a reg editor to enable the 3.5. HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5.
see if this helps
**** turpin said:
you have to use a reg editor to enable the 3.5. HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5.
see if this helps
Click to expand...
Click to collapse
That is for software that was installed on the phone prior to .Net 3.5. It has nothing to do with installing 3.5.
If you can bare it, I'd suggest a hard reset and then try to install it. It should install without issue, as it has for everyone else as I've never seen this problem.
There could be a conflict with something that you've already installed on the phone, but it certainly won't be with an earlier version of .Net. You can (and indeed need to) have different versions of .Net working on the phone.
Let us know how you get on.
johncmolyneux said:
That is for software that was installed on the phone prior to .Net 3.5. It has nothing to do with installing 3.5.
If you can bare it, I'd suggest a hard reset and then try to install it. It should install without issue, as it has for everyone else as I've never seen this problem.
There could be a conflict with something that you've already installed on the phone, but it certainly won't be with an earlier version of .Net. You can (and indeed need to) have different versions of .Net working on the phone.
Let us know how you get on.
Click to expand...
Click to collapse
I performed a hardreset first via Software "1234" then via buttons (volup/down) but every time i try to install it, it says "Microsoft.NET CE 3.5CAB failed" and thats it....
What can i do ? It actually has worked at a certain point but after some hardresets it just doesnt install anymore (
Have you tried a different download? It may be that the installation you downloaded is corrupted. Also, if you're copying it to your SD card and installing from there, that could be damaged, so try it from the device.
Other than that, I really don't know what to suggest. I take it you've googled the error message you get. What did that give you?
Netcf3.5.9198
When I tried to install NETCF3.5 it told me I had a newer version already installed, so I didn't install it. Later I checked my registry and found that I have version 3.5.9198 installed. Does anyone know if BsB Tweaks will work with this version? (EDIT) Well, I tried BSB Tweaks and it seems to work ok with my version of NETCF3.5.
When I tried pinch to zoom on Opera 10, it worked, but also gave a small popup showing the image of the full screen centered on the lower center part of the screen. When ever you double tap to go back to full screen, the little popup disappears. ????
Hi,
I use the 1.66 German ROM from the htc homepage, .NETCF V3.5 is installed and the registry is set to 3.5 instead of .NET 2.0 and there are a lot of applications I found in this forum that cannot be installed.
These are for example:
BsB Tweaks 1.6
Race Chrono
and so on...
Others like Icon changer create error messages (.NET 3.5) during execution ( Icon changer crashes when loading a theme).
Actually I don´t know what to do and where the problem is.
P.S. Maybe one of you guys could state a working download link for .NET 3.5 - maybe my file is a little corrupted???
This not work?
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
When you install it have your HD2 connected via ActiveSync/WMDC and it will ask you to download on your phone as well...
no it doesn't :-(
Hi guys,
recently my HD2 just didn't want to work anymore. Basically it was "on" and plugged via USB to my computer and when I came back by some time, it was completely "off". I tried to activate it but did not succeed to get further then the white screen, whatever I tried.
Result: hard reset.
As I saw that there is an official ROM which was newer than mine I downloaded 1.66er ROM from htc.com.
Everything wet well until I wanted to start Task Fascade. TF tells me: "For this application is a newer version of the Microsoft .NET Compact Framework required" (translated from german to english)
Okay, easy go, I downloaded the 3.5er version of the .NET framework and tried to install the CAB but the installer complains too:"The .NET Compact Framework-Version you are trying to install is already contained in the ROM" (message has also been translated from german to english)
Now I was confused, obviously the 3.5er version is already installed. So I did some search and found (once more) help on this page: forum.xda-developers.com/showthread.php?t=583638
13. Install Compact Net Framework 3.5 to Make Old Apps Work Again
Some apps you may have used on another phone will not work on the Leo unless you install Compact Net Framework to your phone. Download the cab from the following link and install to Device only - not Storage Card and then reset. [...] Also make sure your phone is using the 3.5 as default and not 2.0. Go here: HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5. Also some apps need the file NETCFv35.Messages.EN.wm. Here is the link to download the file: [...] Install the NETCFv35.Messages.EN.wm.cab to device after you installed NETCFv35.wm.armv4i.cab and reset.
Click to expand...
Click to collapse
I did everything I could and double checked the registry entries, rebooted several times but achieved nothing. TF still says the .NET version is too old and the 3.5 installer complains that 3.5 is already installed.
I need some help now
Need help from u guys...
i try to install Net Compact Framework 3.5
in my TouchPro2..
but before the installation finished, there is a pop-up that said error to install..
can somebody help me, any other way to install net cf 3.5..? any tips..? i've already done stopped all applications running, and also make a soft reset but yet, still the same error..
i posted the image below...
Why do u wanna install that? Isn't NetCF 3.5 is preloaded on the ROM?
no.. because i've tried to installed some cabs that requires Net CF 3.5, after install and i want to open the application, there is an error to open.
that's the reason i wanted to installed Net CF 3.5.. :-(
Well did you check if you have any space left on your internal storage? Maybe you filled up your IS accidentally with pictures or videos... If not, I think a hard-rest or re-flash is the only way to go.
well, i forgot to told you that i've already clear my storage to default setting from settings / all settings / system / clear storage.. =D
you tube helped me on installing this app
try this
I was having the same problem on same device. I tried in vain to find a solution online. after poking around my device, i found a file in the root directory - my device - called Microsoft.Net CF.3.5.Log.
I deleted this log file and reinstalled. i think i installed from a cab file copied over to my device.
Matt
hey guys.. thanks to all for postings a good advice..
i'd figured out that there's a microsoft Net CF 3.5
in the root device/windows but i forgot the format for
that file..
i just deleted the file and re-installed Net CF 3.5...
AND IT WORKS..!! successfully installed.. =D
thanx again guys for help..