Just wondering if X1's screen is more flimsy than other screens. Noticed a slight dent/depression near the top of my screen and been wondering whether it all along was like that or cos the screens more flimsy than other phones. Cos don't think I've been pressing too hard. Own a Touch Pro too and have been using that for a longer time and the screen's still ok. Anyone else notice any dent/depression in your screen?
Anyone else notice that the edges of the screen on the cmda diamond, cdma pro, and the HD seem to be MUCH less responsive than the screens of previous devices?
I "miss" the exit and start menu buttons pretty often and its pretty annoying lol.
Also the notification/title bar area plus other buttons along the bottom and side.
The rest of the screen is more responsive certainly than say the vogue, mogul, diamond or tp. But its the edges of this and the last 2 mentioned devices that get me..
Well I also feel it's less responsive, but not so much actually. Besides this is caused by the technology of the touch screen.
pozytywny said:
Well I also feel it's less responsive, but not so much actually. Besides this is caused by the technology of the touch screen.
Click to expand...
Click to collapse
You mean the edges or the whole thing? The main part I feel is more responsive...
Edge responisiveness depends highly on screen calibration. Try to recalibrate screen more precisely, I think situation should improve ...
kosta0955 said:
Edge responisiveness depends highly on screen calibration. Try to recalibrate screen more precisely, I think situation should improve ...
Click to expand...
Click to collapse
Hey thanks a lot. Thought the same thing myself.
Re-calibrated as accurately as I possibly could.
Still no go. I would really like someone else to try this. Take out your stylus even and press in the very corner of the X-button...you get nothing.
Sort of fix: I found that if you hold your press just a little longer it registers (much better) though I'm not quite convinced that it's still normal nor complete.
jim256 said:
Still no go. I would really like someone else to try this. Take out your stylus even and press in the very corner of the X-button...you get nothing.
Click to expand...
Click to collapse
I don't see any problem in pressing X-button on my Touch HD. I had similar problem like yours using right vertical scrollbar and recalibration helped, so I though it might help you too, but unfortunately it seem this ain't the same problem
kosta0955 said:
I don't see any problem in pressing X-button on my Touch HD. I had similar problem like yours using right vertical scrollbar and recalibration helped, so I though it might help you too, but unfortunately it seem this ain't the same problem
Click to expand...
Click to collapse
Hmm...I wonder if I should try to get it replaced under warranty.
I would want to, but I have noticed the same problem in a sprint diamond in the store, a sprint touch pro in a store, and a friends sprint touch pro.
What do you (guys) think? Replacement? It could get really annoying...not being able to close out of things. Right now since its new and awesome and stuff I'm kind of trying to ignore it or whatever but...hmm idk.
The fact that the screen is less responsive near the edges is caused by an inherent technical limitation of resistive screens. The screen has no real bezel, and thus, the screen is attached to the body frame right where it ends: at the absolute edges of the screen Where it is attached, it cannot move. A little further away from the edge it can move (eg be pressed down) but this requires more force since you need to bend the screen much closer to the fixed edges than when you would press the center of the screen, which bends the easiest.
Don't know if this makes sense, but it's like a window... Hitting it in the centre will break it much easier than when hitting it close to the edges, since the glass bends much further/easier at the center, so the same force will have more effect.
Anyway, resistive screens have this problems, capacitive screens do not, obviously, since they do not rely on pressure.
If hitting the OK/Close button is a problem for you, just use the hardware button below the screen, the one with the arrow on it. It does exactly the same thing I believe. With 'I believe' I mean I assigned OK/close to that button using AEButtonPlus, which should be the default behavior for pressing it once. I find this to be much more convenient than trying to hit that tiny X/OK button.
nin2thevoid said:
The fact that the screen is less responsive near the edges is caused by an inherent technical limitation of resistive screens. The screen has no real bezel, and thus, the screen is attached to the body frame right where it ends: at the absolute edges of the screen Where it is attached, it cannot move. A little further away from the edge it can move (eg be pressed down) but this requires more force since you need to bend the screen much closer to the fixed edges than when you would press the center of the screen, which bends the easiest.
Don't know if this makes sense, but it's like a window... Hitting it in the centre will break it much easier than when hitting it close to the edges, since the glass bends much further/easier at the center, so the same force will have more effect.
Anyway, resistive screens have this problems, capacitive screens do not, obviously, since they do not rely on pressure.
If hitting the OK/Close button is a problem for you, just use the hardware button below the screen, the one with the arrow on it. It does exactly the same thing I believe. With 'I believe' I mean I assigned OK/close to that button using AEButtonPlus, which should be the default behavior for pressing it once. I find this to be much more convenient than trying to hit that tiny X/OK button.
Click to expand...
Click to collapse
Hey thanks for your informative opinion.
This theory seems to fit, except it doesn't quite explain nor fit with these 2 things:
1. I can apply a pretty decent amount of pressure in the corner with no results whatsoever. But I can get full results if I apply less pressure for about .5-1 second rather than just tapping.
2. I have never seen any evidence of this on any other resistive touch devices (vogue, titan).
Why in the world do these resistive touch screens have to suck so bad anyway? The HD is the best I've seen lately, but does HTC just suck at it, or is it everyone (haven't owned a non-htc ts device for a yr or so, and that was a treo where I didn't really notice sensitivity).
My dad has a 3+ yr old Dell Axim X5 and that screen is AMAZINGLY sensitive. Responds to stylus and is too old to be capacitive. But it is literally 100% as responsive / sensitive as the screen of the iPhone. When I used it I couldn't believe it. You had to be VERY delicate and careful and trying hard to touch that screen and not have it know.
Hi Guys,
Has anyone else noticed this problem? and / or Could you please test this too to see if it's a common issue?
I use the "phone keypad" style, to enter text as I find i'm the most efficient with that one. However when the phone is horizontal, on a table for example, the backspace key just does not respond. (Which is on the right hand side of the screen near the edge)
As soon as I pick it up, so the phone is at a 45 degree angle for example, the backspace "key" responds again.
In summary I have noticed the left and right areas of the screen do not appear to be very responsive / don't work when the phone is horizontal. The middle "keys" / area is fine.
Any ideas / anyone else?
Had it for a few weeks now, not dropped it or anything, and everything else seems great. What's the deal with replacements from Orange if necessary, do they have to "repair" it? (EEK!)
Cheers, Si
I think you are experiencing this http://forum.xda-developers.com/showthread.php?p=4340678#post4340678
It seems to be more about whether your fingers are touching the bezel!
BuboBriff said:
As soon as I pick it up, so the phone is at a 45 degree angle for example, the backspace "key" responds again.
Click to expand...
Click to collapse
Rather than pick up the phone, just hold it using the thumb and forefinger and see if it works correctly. It seems to me that the touchscreen definitely works better so long as you're physically touching the device elsewhere than just using the screen. I do wonder if this is an artifact of the capacitive touch screen - I'd be interested to know if iPhones show the same behaviour.
Regards,
Dave
Just got my unit today and love it.
Only notice a soft sparkle (like when you splash water on any LCD screen) but it's very soft and only noticeable at certain angle.
quick call to friend who has HD2, same problem.
anyone else have that problem ?
it is not a problem, it's how this capacitive display is built. at certain angle You will also notice a grid of lines and tiny dots.
sg10 said:
Just got my unit today and love it.
Only notice a soft sparkle (like when you splash water on any LCD screen) but it's very soft and only noticeable at certain angle.
quick call to friend who has HD2, same problem.
anyone else have that problem ?
Click to expand...
Click to collapse
It sounds to me like you've noticed the grid in the screen. This is part of the capacitive screen design, and not a fault or issue. It's there on everyone's phone, but as you've obviously seen, it's so unnoticable normally that you just forget about it.
Is it that, or something else?
Edit:
Or you could you read the post above
just curious, how come I didn't notice it on iphone ? lower screen resolution + smaller screen ?
sg10 said:
just curious, how come I didn't notice it on iphone ? lower screen resolution + smaller screen ?
Click to expand...
Click to collapse
I couldn't say why you didn't notice it, but it is there.
Just wondering if anyone else having this issue. When I put in T form. The main screen when I press it rocks a bit. Doesn't feel solid. Opens and closes fine and looks even across phone but seems really loose.
vhicke said:
Just wondering if anyone else having this issue. When I put in T form. The main screen when I press it rocks a bit. Doesn't feel solid. Opens and closes fine and looks even across phone but seems really loose.
Click to expand...
Click to collapse
I have a little wobble in mine. But nothing notable. I also noticed some "slop" when my screen was closed. However, the front screen protector help to remove /minimize that issue (when the phone is closed)