Just wondering if X1's screen is more flimsy than other screens. Noticed a slight dent/depression near the top of my screen and been wondering whether it all along was like that or cos the screens more flimsy than other phones. Cos don't think I've been pressing too hard. Own a Touch Pro too and have been using that for a longer time and the screen's still ok. Anyone else notice any dent/depression in your screen?
Related
Hi,
Recently ive repaired a HTC Universal, put it back together as best as i could.
Now when i do touch the screen with a stylus, the screen has funny colours behind it. It kind of like when you touch/ prod your Computer LCD. It only happens when theres pressure on the screen so its not really a huge problem. The touch screen is definately there cause when i tap the screen it responds (e.g i tap start and the menu pops down).
If its normal then i can take it, but if its not im complaining to the ebay seller.
This doesent happen when i put any form of pressure on my HTC magician LCD, so im curious.
Let me know what happens with your universal
Cheers,
Whitemoo.
This is not normal behaviour of any touchscreen device!!
hmmm... well i just looked at the broken lcd screen, and even though the LCD itself is shattered, the touch screen is in perfect nick.
I put pressure on the touch screen and couldnt see any of the symptoms i saw on my current LCD
You guys recon i should swap the touch screen over? either way im complaining to the sellers, DODGY.
whitemoo.
from my knowledge, im pretty sure its normal. it happens sometimes on my 9000 so yeahh....
Anyone else notice that the edges of the screen on the cmda diamond, cdma pro, and the HD seem to be MUCH less responsive than the screens of previous devices?
I "miss" the exit and start menu buttons pretty often and its pretty annoying lol.
Also the notification/title bar area plus other buttons along the bottom and side.
The rest of the screen is more responsive certainly than say the vogue, mogul, diamond or tp. But its the edges of this and the last 2 mentioned devices that get me..
Well I also feel it's less responsive, but not so much actually. Besides this is caused by the technology of the touch screen.
pozytywny said:
Well I also feel it's less responsive, but not so much actually. Besides this is caused by the technology of the touch screen.
Click to expand...
Click to collapse
You mean the edges or the whole thing? The main part I feel is more responsive...
Edge responisiveness depends highly on screen calibration. Try to recalibrate screen more precisely, I think situation should improve ...
kosta0955 said:
Edge responisiveness depends highly on screen calibration. Try to recalibrate screen more precisely, I think situation should improve ...
Click to expand...
Click to collapse
Hey thanks a lot. Thought the same thing myself.
Re-calibrated as accurately as I possibly could.
Still no go. I would really like someone else to try this. Take out your stylus even and press in the very corner of the X-button...you get nothing.
Sort of fix: I found that if you hold your press just a little longer it registers (much better) though I'm not quite convinced that it's still normal nor complete.
jim256 said:
Still no go. I would really like someone else to try this. Take out your stylus even and press in the very corner of the X-button...you get nothing.
Click to expand...
Click to collapse
I don't see any problem in pressing X-button on my Touch HD. I had similar problem like yours using right vertical scrollbar and recalibration helped, so I though it might help you too, but unfortunately it seem this ain't the same problem
kosta0955 said:
I don't see any problem in pressing X-button on my Touch HD. I had similar problem like yours using right vertical scrollbar and recalibration helped, so I though it might help you too, but unfortunately it seem this ain't the same problem
Click to expand...
Click to collapse
Hmm...I wonder if I should try to get it replaced under warranty.
I would want to, but I have noticed the same problem in a sprint diamond in the store, a sprint touch pro in a store, and a friends sprint touch pro.
What do you (guys) think? Replacement? It could get really annoying...not being able to close out of things. Right now since its new and awesome and stuff I'm kind of trying to ignore it or whatever but...hmm idk.
The fact that the screen is less responsive near the edges is caused by an inherent technical limitation of resistive screens. The screen has no real bezel, and thus, the screen is attached to the body frame right where it ends: at the absolute edges of the screen Where it is attached, it cannot move. A little further away from the edge it can move (eg be pressed down) but this requires more force since you need to bend the screen much closer to the fixed edges than when you would press the center of the screen, which bends the easiest.
Don't know if this makes sense, but it's like a window... Hitting it in the centre will break it much easier than when hitting it close to the edges, since the glass bends much further/easier at the center, so the same force will have more effect.
Anyway, resistive screens have this problems, capacitive screens do not, obviously, since they do not rely on pressure.
If hitting the OK/Close button is a problem for you, just use the hardware button below the screen, the one with the arrow on it. It does exactly the same thing I believe. With 'I believe' I mean I assigned OK/close to that button using AEButtonPlus, which should be the default behavior for pressing it once. I find this to be much more convenient than trying to hit that tiny X/OK button.
nin2thevoid said:
The fact that the screen is less responsive near the edges is caused by an inherent technical limitation of resistive screens. The screen has no real bezel, and thus, the screen is attached to the body frame right where it ends: at the absolute edges of the screen Where it is attached, it cannot move. A little further away from the edge it can move (eg be pressed down) but this requires more force since you need to bend the screen much closer to the fixed edges than when you would press the center of the screen, which bends the easiest.
Don't know if this makes sense, but it's like a window... Hitting it in the centre will break it much easier than when hitting it close to the edges, since the glass bends much further/easier at the center, so the same force will have more effect.
Anyway, resistive screens have this problems, capacitive screens do not, obviously, since they do not rely on pressure.
If hitting the OK/Close button is a problem for you, just use the hardware button below the screen, the one with the arrow on it. It does exactly the same thing I believe. With 'I believe' I mean I assigned OK/close to that button using AEButtonPlus, which should be the default behavior for pressing it once. I find this to be much more convenient than trying to hit that tiny X/OK button.
Click to expand...
Click to collapse
Hey thanks for your informative opinion.
This theory seems to fit, except it doesn't quite explain nor fit with these 2 things:
1. I can apply a pretty decent amount of pressure in the corner with no results whatsoever. But I can get full results if I apply less pressure for about .5-1 second rather than just tapping.
2. I have never seen any evidence of this on any other resistive touch devices (vogue, titan).
Why in the world do these resistive touch screens have to suck so bad anyway? The HD is the best I've seen lately, but does HTC just suck at it, or is it everyone (haven't owned a non-htc ts device for a yr or so, and that was a treo where I didn't really notice sensitivity).
My dad has a 3+ yr old Dell Axim X5 and that screen is AMAZINGLY sensitive. Responds to stylus and is too old to be capacitive. But it is literally 100% as responsive / sensitive as the screen of the iPhone. When I used it I couldn't believe it. You had to be VERY delicate and careful and trying hard to touch that screen and not have it know.
Well i had the phone since it came out and i realized now that there are dust going under the screen from where the stylus opening is. Everything im on a white screen i will see it. Does anyone else have this problem?
I have no dust at all under the screen on my HD, but that might be because I never use the stylus.
yes same here, i suggest never use your stylus
This is my first phone with a capacitive screen, so perhaps it is a quirk of them, but I have noticed that if I am not holding the phone in such a way that I am touching the metal bezel, the screen does not recognise touches that are close to the edges of the screen. It seems that the screen requires a circuit to be made with other metal parts on the phone before recognising the touch.
For example, if I put the phone on my desk and touch the backspace key with a single finger, nothing happens. If I keep holding my finger on it, and touch the metal bezel, hey presto, the button clicks.
This reminds me of a watch a friend of mine had a long time ago, that had a capacitive "hair trigger" button that only worked for him (because it required a circuit to be made with the back face of the watch, meaning when he pressed the button it completed a circuit through his body)
Anyone else noticed this? It is slightly annoying because I have to hold the bezel when I want to use the phone..
Confirmed.
And you might very well be correct in the assumption about the circuit not closing in every part of the screen. I think it's the nature of any capacitive surface tbh. If you press in the middle of the screen then there is enough adjecent space to actually complete the circuit while on the edges there is simply not enough space around your fingertip to not close the circuit at all. That is why touching the bezel works.
But as I have been holding my little Hero in my hand while typing anything I simply didn't know this little odd thing. I have read about it though.
Yet another reason to hold your precious little Hero in your hand...
Wierd not like that on my samsung.. its all plastic tho
Mine is the same.. especially on the right hand side of the screen. If it's in a case it makes it really bad!!
Sounds like bad shileding and grounding to me
Didn't notice this until I put a screen protector on but now it's really bugging me.
On a related note (metal bezel related), I've noticed that in dim lighting the button backlight flickers. But if i touch the screen and bezel, it stops.
herman3101 said:
Didn't notice this until I put a screen protector on but now it's really bugging me.
Click to expand...
Click to collapse
Same here. Could it be that the screen protector slightly touches the aluminium casing and thus grounding the screen (or creating a wrong potential)?
I noticed that when i touch (=ground) the outer aluminum frame with just one single finger then the touch screen works flawlessly.
(I'm using the offical HTC screen protector).
joemax said:
On a related note (metal bezel related), I've noticed that in dim lighting the button backlight flickers. But if i touch the screen and bezel, it stops.
Click to expand...
Click to collapse
Hmm definatly bad grounding issue. Its either some pretty poor design or a defect.
i confrim, using hero without touch the metal edge result in less responsivity and difficult on multitouch operation
hope new firmware can solve this, too many errors using it like a normal keyboard on a table!
Just got my unit today and love it.
Only notice a soft sparkle (like when you splash water on any LCD screen) but it's very soft and only noticeable at certain angle.
quick call to friend who has HD2, same problem.
anyone else have that problem ?
it is not a problem, it's how this capacitive display is built. at certain angle You will also notice a grid of lines and tiny dots.
sg10 said:
Just got my unit today and love it.
Only notice a soft sparkle (like when you splash water on any LCD screen) but it's very soft and only noticeable at certain angle.
quick call to friend who has HD2, same problem.
anyone else have that problem ?
Click to expand...
Click to collapse
It sounds to me like you've noticed the grid in the screen. This is part of the capacitive screen design, and not a fault or issue. It's there on everyone's phone, but as you've obviously seen, it's so unnoticable normally that you just forget about it.
Is it that, or something else?
Edit:
Or you could you read the post above
just curious, how come I didn't notice it on iphone ? lower screen resolution + smaller screen ?
sg10 said:
just curious, how come I didn't notice it on iphone ? lower screen resolution + smaller screen ?
Click to expand...
Click to collapse
I couldn't say why you didn't notice it, but it is there.