Related
After hard-resetting my mini and loading ROM 1.11 then not loading the extended rom ( reset prior to installation ) I notice when I dial a number on the phone, it now reads (993) 137-83 instead of 9931 3783
Any ideas as to why? Am I supposed to run a particular cab file?
thanks in advance
frigit said:
After hard-resetting my mini and loading ROM 1.11 then not loading the extended rom ( reset prior to installation ) I notice when I dial a number on the phone, it now reads (993) 137-83 instead of 9931 3783
Any ideas as to why? Am I supposed to run a particular cab file?
thanks in advance
Click to expand...
Click to collapse
The short answer is YES, its in one of the CAB files but I don't know which one. If I hat to guess I'd go for the "default_103133" CAB.
What i did was test each CAB file to see what it changed but didn't write it down. :roll:
Try playing around with the regional settings... example if u use english (australia) the bracket will be gone or if u use english (united states) the numbers dialled will be according to the standard format there which has brackets. good luck.
::adit
Thanks folks, Adit you hit the nail on the head. My regional settings were set to United States. Much appreciated.
hi. im in sydney wit xda2mini, set my region to english aust.
in my contact i have like this : (04) 0157-5243 for mobile phone, which is very bad looking. can some1 tell me how to change it to 0401575243 or 0401 243 575.. as long it doenst have bracket, then im happy
maybe this is because my outlook? i sync my xda with outlook 2000. i tried to change outlook setting but couldnt find the correct option like region or something. thx every1~~~~~~~~~~~
Check ypur regional settings on your PDA.
START, SETTINGS, REGIONAL SETTINGS, make sure it is selected to ENGLISH (AUSTRALIA)
I have changed this setting and I still have the numbers looking stupid with the brackets.
Might it have something to do with how outlook handles the numbers?
yes, thats what i said in prev. post. if i insert new contact FROM XDA, then i wont have bracket. but if i create new contact FROM OUTLOOK, it will make 1st 2 digits inside brackets. i couldnt find any setting in outlook to modify this.. some1 can help? thx
Outlook
Lads,
This is an outlook querk. If you go into a contact and enter a phone number or tap the edit button next to a contact you get a window which has three enterable areas. Country code, NDC (National destination code) or area code and number. Outlook automatically formats the number into
+<country code> (<area code>) <number
You can stop it from doing this but it can be helpful when its formatted like this. I've changed all my numbers to this format.
Re: Outlook - how to remove brackets on numbers?
latts said:
You can stop it from doing this but it can be helpful when its formatted like this. I've changed all my numbers to this format.
Click to expand...
Click to collapse
So how do you stop outlook from doing this?
adit said:
Try playing around with the regional settings... example if u use english (australia) the bracket will be gone or if u use english (united states) the numbers dialled will be according to the standard format there which has brackets. good luck.
::adit
Click to expand...
Click to collapse
This bracket thing is really annoying me too.
Is there any English (Indonesia) or English (Singapore) that don't use bracket? Or should we change to English (Australia)?
Hormat saya,
Arto.
UK
Try UK regional settings. No brackets
i believe the problem is at the OUTLOOK side, not from the xdamini. like i said, (mine set to english australia) if i enter new contact FROM XDA, then it will be stay without bracket, but iwill have bracket if i create new contact FROM OUTLOOK.
I think it will only add brackets once you edit the number. I think Outlook sees spaces in the phone number as telling it what is the international code, area code etc. If you leave the number as +11234567890 I think Outlook ignores it.
I had mine as a mixture but prefer them with the brackets and so edited them.
Its definitely Outlook not the phone
When i try to call somebody through SmartDialing it searches by LastName/FirstName is there a way or some registry hack where i can do it by FirstName/LastName......
isn't anybody facing any problem in this regard???
are u serious????
nobody is experiencing it????
is it only me???
.... is there a solution yet???
same problem
I have the same problem.
In Portugal, we call people by first name/last name.
Anybody knows how to fix it?
Regards
Marcus
I don't know what smart dialing you ppl are talking about but on my exec if i seach by name in contacts it gives both results - by first as well as last name.
If I use the keypad to key numbers in the dial mode then it searchs by number, firstname and lastname. So whats the issue about? Also the list of people is displayed wherein the matches for the firstname are displayed first and then the lastname. Yes the names are displayed in lastname-firstname format but that doesn't really make a difference does it? (the names are highlighted to the last character keyed in)
The only way to change the order from Last, First to First Last is via desktop Outlook. Go into Tools > Options > Contact Options and change the "Default Full Name order" and "Default File As order" options to what you wish.
However, the only way to change the existing contacts is to go into each within desktop Outlook and change the File As option.
Cheers
Ant
but isn't there a way or a registry hack to change the display to FirstName/LastName in smart dialing?
Try This....
I think is this what are you looking for....
Re: Try This....
gazela00 said:
I think is this what are you looking for....
Click to expand...
Click to collapse
I downloaded this to my phone and installed it... but nothing happened... Are there any steps that I should follow?
Re: Try This....
cuteangelika said:
gazela00 said:
I think is this what are you looking for....
Click to expand...
Click to collapse
I downloaded this to my phone and installed it... but nothing happened... Are there any steps that I should follow?
Click to expand...
Click to collapse
In contacts, press the contacts and it appears a new item in Menu in order to make first name, last name
Hi all,
I'm a new PDA phone user....just bought my O2 Atom Exec few days ago.
Not sure if this has been answered before but I can't seem to find any posts on this anywhere.
1) When dialing or receiving calls, the phone number is always displayed with country code, area code format, e.g. 1 (234) 567-8, even though all I wanted was to dial an 8-digit local phone number without any country/area codes. Is there any way to change this display behaviour?
2) Can we choose what fields to be displayed on the Contacts page? Currently, only the Name and phone number is being displayed in the Contacts list. Can we also perhaps choose to display the company name on the list as well? I have customers from different companies with the same names....would be good to be able to differentiate them at a glance.
Appreciate any help. Thanks.
Andrew
andrewlhl said:
1) When dialing or receiving calls, the phone number is always displayed with country code, area code format, e.g. 1 (234) 567-8, even though all I wanted was to dial an 8-digit local phone number without any country/area codes. Is there any way to change this display behaviour?
Andrew
Click to expand...
Click to collapse
u have to change the regional settings...
try other types of English
for example: English (United Kingdom) or English (United Sates) or...
No No I think it is purely network operator dependant.
Anant said:
No No I think it is purely network operator dependant.
Click to expand...
Click to collapse
no i do not think so
coldfire is right....I changed the regional settings to English (Australia) and it's ok now.
Any ideas on how to add more fields when displaying the contacts list? Or are there any good replacement software?
Thanks.
See if PocketCM works on the Atom. I love it on my Wizard and Hermes.
problem with my mobile nokia n73
hello
I have a portable music eddition nokia n73.
but it does not apply.
what do I do?
probleme with n70
l ve got a laptop n70 musical eddition but this same block whenever I flascher and I install the latest versionn but always the same problem
thank you
lemontagne said:
hello
I have a portable music eddition nokia n73.
but it does not apply.
what do I do?
Click to expand...
Click to collapse
What do you want to 'apply' in the first place? Regional settings?
Please help!
I have having this problem which been bothering me.
The phone dial prefix was wrong. The format is (XXX) 123-12345
my country singapore format is (XX) 1234-1234
With this wrong format, it cannot display the correct contact.
Can someone please help
If you've just upgraded to WM6 then this is not surprising.
I had the same problem for UK numbers here at home. You need to change your regional options to reflect the country where you are.
Hope that helps!!
xavierng,
Go to Start -> settings -> system -> regional settings and select your region settings.
It should solve this
JP
I am not sure if the regional setting would define format for phone numbers.
Alternatively, open the Contacts and then click on 'Menu' and select 'Options...' Enter correct Area code there and you are done..
xavierng said:
Please help!
I have having this problem which been bothering me.
The phone dial prefix was wrong. The format is (XXX) 123-12345
my country singapore format is (XX) 1234-1234
With this wrong format, it cannot display the correct contact.
Can someone please help
Click to expand...
Click to collapse
There is another simple solution for your problem:
Edit the phone WM6 registry, with a registry editor( you can download a freeware version anywhere)
Edit this register:
Record:
HKCU\ControlPanel\Phone\CallIDMatch
When you find it, change the decimal value from 8 to the desired number: eg 7 in my case.
Good luck !
Juan
April 1 said:
I am not sure if the regional setting would define format for phone numbers.
Alternatively, open the Contacts and then click on 'Menu' and select 'Options...' Enter correct Area code there and you are done..
Click to expand...
Click to collapse
Yes, it does.
The regional settings also include numbering format.
When you install the ROM the default regional settings are US so, it uses US numbering format, putting it on your region should solve the problem.
Try it out
JP
JPBRA said:
xavierng,
Go to Start -> settings -> system -> regional settings and select your region settings.
It should solve this
JP
Click to expand...
Click to collapse
I have tried this. It actually solved the Dialing prefix but it create another problem. My country is Singapore (chinese) thus the long date format give me alot of boxes. This affect my calender view.
By pass the whole issue by installing a 3 party PIM, I use Webis Pocket informant and format the numbers the way I like them +41 (123) 456 78 90.
MDAIIIUser said:
By pass the whole issue by installing a 3 party PIM, I use Webis Pocket informant and format the numbers the way I like them +41 (123) 456 78 90.
Click to expand...
Click to collapse
I am using pocket informat and i like it but due to the dialing prefix problem, it cannot recognize the contact from informant.
I will try the registry solutions...
tommycr said:
There is another simple solution for your problem:
Edit the phone WM6 registry, with a registry editor( you can download a freeware version anywhere)
Edit this register:
Record:
HKCU\ControlPanel\Phone\CallIDMatch
When you find it, change the decimal value from 8 to the desired number: eg 7 in my case.
Good luck !
Juan
Click to expand...
Click to collapse
I am trying to edit the registry in HKCU\ControlPanel\Phone but cannot find callidmatch.
Well you lost me, which is ok.
We here in switzerland had both XX and XXX as dial codes (untill we changed this year). I have never had a problem with that standard nor with USA +1 (xxx) yyy-zzzz or infact any other contry.
I sync from Outlook, my layout is how I want it on each contact and I use +CC on all contacts as I am out of the country a lot.
I think I surpress the auto format in Pocket Infromant, its one of the TONS of settings that you can use.
Good luck, sorry I could not help more.
xavierng said:
I am trying to edit the registry in HKCU\ControlPanel\Phone but cannot find callidmatch.
Click to expand...
Click to collapse
If you want to edit the registry:
\HKLM\Software\Microsoft\AddrBook:
You can enter like +xx (xx) or whatever you want to appear.
xavierng said:
I have tried this. It actually solved the Dialing prefix but it create another problem. My country is Singapore (chinese) thus the long date format give me alot of boxes. This affect my calender view.
Click to expand...
Click to collapse
Xavierng,
What's the problem with the calendar ? I didn't understood ...
JP
--------------------------------------------------------------------------------
Hi,
How I see the name when I recived de SMS, no number?
Exemple: +34698977xxx ==> Pepito
thanks
I also had some problems with that at first. I had some numbers saved as 0155-1234567 = Maria
But when Maria called, I saw +491551234567 in the screen and also in the call history. So I saved that number to Maria's contact file and then it was fine.
The weird thing is that with other contacts I did not have that problem although they were saved just like Maria.
Maybe someone else has an explanation for that?
In the mean time, just save the number that called you into the corresponding contact and it should work next time that person calls you. At least it worked for me.
Chris Cross said:
I had some numbers saved as 0155-1234567 = Maria
But when Maria called, I saw +491551234567 in the screen and also in the call history. So I saved that number to Maria's contact file and then it was fine.
Click to expand...
Click to collapse
I'm sure that is the solution.
Also, at risk of veering slightly off-topic, it's worth adding that if you store all your numbers in that full international format starting with +, then you should be able to dial from anywhere (including roaming in different countries) and the phone will connect correctly.
- Steve
fasty said:
I'm sure that is the solution.
Also, at risk of veering slightly off-topic, it's worth adding that if you store all your numbers in that full international format starting with +, then you should be able to dial from anywhere (including roaming in different countries) and the phone will connect correctly.
- Steve
Click to expand...
Click to collapse
Yes, that is true. I realized that when I went on vacation out of the country and tried to call home. I dialed 049..... as you would on a land line, but it did not work. It only worked if I dialed +49....
So it is a good idea to have all your numbers in that format.
I think for international numbers it should kick off with a double 0. That is 0049... or alternatively,and as you say, +49...
RaymondScrott said:
I think for international numbers it should kick off with a double 0. That is 0049... or alternatively,and as you say, +49...
Click to expand...
Click to collapse
Oops - you're right. I meant to type 0049.
If calling from a European country you dial 00-country code.
If calling from the U.S. you would dial 011-country code.