Related
Hi,
I seem to have made my MDA compact II a brick. I was having problems hard reseting it (Format FAT failed) so I tried upgrading to a different firmware.
I now have the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
firmware on it. This is not good as it is for the Prophet, although it says in the Wiki that this should work. Anyway I can now hard reset the phone, so all I need to do is flash the TmobileUK firmware back on it. The only problem is that it doesn;t let me do it. It says error:296 upgrade only.
Anyone any ideas?
cheers.
extract the contents of the t mobile package using win rar
download
ftp://xda:[email protected]/Prophet/Tools/ROMUpdateUtility-NoVendorID.zip
and put in the same directory and run.
It gets to 1% then says invalid command, not for this phone.
Latest T-Mobile ROM is at http://www.tm-phonedownloads.com/download_manager_mda_com2.html
very stable, much better than the original shipped ROM
Finally got it back.
If you have a T-mobile MDA II (Charmer), then Flash it with a Prophet ROM, the only way I could get it back was to use the following:
RUU_Charmer_100_100_049_CHS_Ship.rar
typho5 -x nk.nbf
Then created a new nk.nbf with the output using nb2nbf.
I then Flashed this with Wizard_RomUpgradeUtility_noID
And miracle it started. I quickly CID unlocked it and am now flashing with latest T-mobile.
My problem was that the Rom Update programs wouldn;t read version 2.xx ROMS.
Anyway it has just finished and looks fine. Thanks for everyones help, now I just have to get my SD wifi card working.
How do you do it
Hi I just got a MDA compact II from T Mobile UK I would like to upgade the ROM but its all very new to me since you know what you are doing can you post an idiots guide to the process.
Hope you can help
Hi, it depends what Rom you want to upgrade it to, the latest one from T-mobile is pretty good. There is an unbranded one (no T-mobile logos or suchlike) or there are Roms in different languages. It depends why you want to change the firmware and what to.
I suppose I don't really know the problem is as I just got the thing did some searching and came across this site read your post and thought i want to do this maybe you have some suggestion. Also I tried the RUU mentioned in an earlier post but it I can't update when I get to the from/to screen it tells me I will go from 2.6.2.110 to 2.6.2.110 I was expecting to move up.
daveh1171 said:
I suppose I don't really know the problem is as I just got the thing did some searching and came across this site read your post and thought i want to do this maybe you have some suggestion. Also I tried the RUU mentioned in an earlier post but it I can't update when I get to the from/to screen it tells me I will go from 2.6.2.110 to 2.6.2.110 I was expecting to move up.
Click to expand...
Click to collapse
Sounds like you are running the latest version. Is there a problem with the phone? If the phone works fine, I would just unlock it using lokiwiz02b (So you can use any network card) and then EnableRapi (So you can run unsigned code) then CID unlock it using awizard (so you can use any Brand/Language of ROM).
If you have no problem with the firmware I would leave it alone.
Hi,
Yep, I'm in the same situation, why does the prophet firmware load onto the charmer without erroring? !!!
Anyway, I have a copy of RUU.rar but I'm having problems working out what I need to do to it between unpacking and flashing the phone (i.e. the typho5 bit and then the nb2nbf).
Can someone please help me out?
P.S. The phone just sits at a black screen that says 'Dopod' across the front at the moment
Can anyone tell me how to 'force' a downgrade of firmware? I've got what appears to be the right firmware from FTP but it won't over write the incorrect version 2 installation as the uploader software thinks it's later therefore better.
There has got to be a better option from the command line surely?
HELP phone is dead
Chirpy said:
Can anyone tell me how to 'force' a downgrade of firmware? I've got what appears to be the right firmware from FTP but it won't over write the incorrect version 2 installation as the uploader software thinks it's later therefore better.
There has got to be a better option from the command line surely?
HELP phone is dead
Click to expand...
Click to collapse
Progress, but now it works only from the charger so the shipped ROM upgrade won't work as it reports the battery as being at less than 50%.
Anyone know how to force a ROM upgrade or where I can find the right ROM files to use awizard to do this?
Hey guys i tried flashing my rom using the Shelltool. I loaded the two cabs on the device and put it back to Tmobile 2.26. While i was in the shelltool it told me to do a hard reset and i think the phone was frozen (it didnt go to the normal colorful screen like usual) so i took the battery out of the back and powered it on. I left the software running like it said but it just froze up.
Now my MDA wont move past the Tmobile screen. I REALLY need a hand with this because this phone keeps my life in line! I dont even think ill be able to get up tomorrow because all my alarms go off my phone
Let me know if theres anything i can do otherwise im looking at a Motorola A1200 :-(
kind regards,
Eddy
Hi there,
Not familiar with Shelltool. I do most of my flashing using ActiveSync. Have you tried forcing the phone into Bootloader Mode (hold the Camera button while turning it on). Worth a shot.
If t-mobile was the original ROM on the phone, then just flash it again using the exe (or RUU if you extracted the files from the exe) instead of using shelltool and see if that brings it back to life.
well its stuck on the tmobile splash and shows no actual connection to the machine would it still work?
If you can get into bootloader mode then you should be fine. Just put your device into bootloader and flash wizard love rom or the rom that your device came shipped with.
Good Luck
looks like its working guys but its most likely still going to look and be WM5. Im still willing to try and get WM6 on it tho. I have the roms but its just not working any ideas?
Well, if you're flashing the t-mobile ROM right now then it is going to be WM5. Since you now know what to do if the ROM your loading doesn't stick, try flashing the ROM you were trying to flash again. By the way, what was your IPL and SPL before you flashed it the first time where it didn't work? If it was less than 2.xx then that was your problem most likely. If you're now updating to the latest t-mobile ROM the way I told you to (using the exe or RUU) then your IPL and SPL now should work fine with WM6.
Well I just finished upgrading my MDA to WM6. Here's what I did. First off I
fould out that you need the phone CID Unlocked for it to accept the WM6
ROM. Follow the instructions on this thread by Dr. Puttingham.
http://forum.xda-developers.com/showthread.php?t=285435
This should get your MDA ready provided it is a G3 (thread will tell you how
to tell the difference.) Then follow the directions on mfrazzz's thread:
http://forum.xda-developers.com/showthread.php?t=324632
I had problems with my MMS after the update but after re-installing the WM6
ROM and installing the CAB files by Lurch anf FZZF I got that problem
squared away. Believe me when I say I know what you are going thru. I
was fiddling around with this for about a week. Luckily I am on vacation and
I had plenty of time to read and decipher alot of the info I found. Good luck
and remember to READ, READ, READ. BTW, props to all that contributed to
these fine tutorials and for this awesome ROM. I have it running on my MDA
for three days now and am very happy with it. I am also using the 3.08
IPL/SPL which seems to give me better reception, which my wife seems to
appreciates
Hi im sorry i had to post this as its probably been asked over and over but ive searched forum and cant seem to find a working solution for me.
I updated my HTC Touch ELF with Onyx ROM after updating SPL etc and everything went fine but couldnt get a signal etc on phone so decided to go back to old rom that i made a backup of untill i had done more research and found the ROM i wanted.
Reflashed the backup rom build i made everything looked good untill i went to boot and it just powered off after the orange brand logo.
I cant do the goldcard method as i have no other phone that can take the card i do however have a adapter for my pc for the card.
Ive treid the ubrick thread but cant get mtty.exe to use usb port.
Can somebody help me out to get this up and going again, Sorry for posting this i know its probably been asked many times but cant seem to get it going and am a n00b on this subject really.
thnx.
[EDIT]
Just managed to get that unbricking rom installed and booted so am gunna try and flash my original dump again.
[EDIE2]
Seems it some problem with my original backup as just doesnt boot after brand logo, When building with HTC Rom tool other files are green but OS file stays black does that mean the OS file is bad?
the adapter for ur card wont work, u need a WM device to make the goldcard method.
what about this: http://forum.xda-developers.com/showthread.php?t=446242
crapula512 said:
the adapter for ur card wont work, u need a WM device to make the goldcard method.
what about this: http://forum.xda-developers.com/showthread.php?t=446242
Click to expand...
Click to collapse
yeah thnx that did the job
Cant seem to get my original dump back on though
I originally just wanted to update to windows 6.1 but there isnt a official update can you recommend the best/most stable unofficial one to use?
take a look at onyx, tess, touch hd or aether. and if u feel brave, u can try letama which is WM 6.5 beta
tried the onyx and another but cant find network just keeps "searching..."
what radio do u have? try with 3.34 or 3.39
Thnx, Just noticed the updates and are going to update and retry.
thnx for help, appreciate it
Do they have them updates for the ELF, can only find those versions for ELFIN.
[EDIT] nm Noticed they are for either
Still having trouble with signal always searching, Installed latest radio version aswell.
[EDIT] whoops what a dumbass, I missed the pin entry at beginning which sometimes pops up but then boots into today screen if not enetered in time, finds signal straight away now
Ok I searched before asking and hope this isnt somewhere else but I have a downgrade issue. I want to downgrade from the OTP 7.7 to the original t-mobile rom but every time I try it goes to 1 percent and the phone resets itself then causing a update 262 error I have tried putting the phone in bootloader and even tried putting the phone in flight mode. None of these have worked. I am on hour three now of returning my WIFES wing back to its original state to no avail. My wife is starting to think I cant change it back and is getting upset PLEASE help!!!!!!
Try to install Hard SPL 4.70 yang again, maybe this can help you. I had an error like this, when I tried to flash back to HTC-Rom before a while.
emtffs said:
Ok I searched before asking and hope this isnt somewhere else but I have a downgrade issue. I want to downgrade from the OTP 7.7 to the original t-mobile rom but every time I try it goes to 1 percent and the phone resets itself then causing a update 262 error I have tried putting the phone in bootloader and even tried putting the phone in flight mode. None of these have worked. I am on hour three now of returning my WIFES wing back to its original state to no avail. My wife is starting to think I cant change it back and is getting upset PLEASE help!!!!!!
Click to expand...
Click to collapse
are you trying to restore the wing back to original tmobile stock ROM and remove hardspl (for warranty purposes) or just getting the stock ROM back?
are you hardspl?
This is not a development thread. Please keep all non-development threads to the Herald or Herald 6 forums.
If you hardSPL'd, you can't flash because of your current SPL. You can do two things:
1. Use USPL along with the tmobile stock RUU to bypass the HardSPL and overwrite it with the original SPL.
2. Take apart the RUU and put it back together without the old SPL (and resigning it with a non-tmobile/htc signature which is done automatically by the tools.)
gotanewphone said:
are you trying to restore the wing back to original tmobile stock ROM and remove hardspl (for warranty purposes) or just getting the stock ROM back?
are you hardspl?
Click to expand...
Click to collapse
Yes I am Hard SPL with the yang version will try the USPL as Ivan Said. Ivan I am sorry will put thread in right place next time.
after my phone rebooted once the update was complete, it wont get passed the "at&T World Phone" white screen... SOMEONE PLEASE HELP ME!!!! i was using a stock at&t pure with the stock rom. i can not upgrade hardspl or ANYTHING any suggestions on how to get my phone to boot? hard-reset went through with no signs of failure but it still will not boot up after that finishes... sorry if its something im overlQQKing, but i just cant figure it out. n yes i have researched although obviously not enough at this point. Thanks to anyone who can help in advance. forgive my stupidity!!!
......
noone?????
The HTC Pure updates hosed my phone too, I had already applied hard-spl to my Pure and i've flashed it with dozens of roms. Since I was currently using one of the "Stock" AT&T roms posted on XDA I figured I could apply the updates. Unfortunately after applying the update my phone froze at the boot loader. I was forced to flash my rom using the memory card method and then restore a backup.
you could try putting the phone in SSPL mode manually, (reset button+volume down), the run hard-spl hard-spl in manual mode.
you can then flash your rom using the memory card method. (FAT32 formated memory card, rom file renamed to topaz.nbh copied to root of flash card, reset button+volume down to enter SSPL, power button to confirm flash).
All this assumes you've already tried to hard reset your Pure (reset button+vol up+vol down)
Thanks for the reply! Unfortunatly, i tried the manual method and after it hanging at 0% for about 5 minutes, i keep getting error [262] update error.. (communications error) is this becuase i can not sync with mobile device center (win7)? I really dont want to just have to toss the phone! I have had an at&t tilt, at&t fuze, and now the at&t pure, and this is the only phone i have had this problem with for some reason...
Try Unplugging Your Pure From the computer Take Out the Battery Put the Battery Back in Mean While Restart your computer and Press Power And Volume Down At the Same time on your Pure If its on the colored screen your good,..Make sure your system is online and your not downloading anything and plug in your Pure to the computer it give it about 2 minutes to download the HTC USB driver then once its done your phone will say USB on the bottom of the Red Green Blue And White four color screen Then open up one of your ROM's and Flash it,....Do You Have Windows Mobile Device Center Installed?
If Not here is the Link
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
If you do already you need to uninstall the Driver update for windows mobile media center then install it again .
i can get the bootloader screen just fine! i just can not get hardspl to flash onto it. it sits at 0% every time. the phone will not boot so i can NOT get into mobile device center. The tri-colored screen comes up with no problem and it says USB on the bottom, so the drivers are already installed. I even tried hard-reset and still no luck
There was an additional cab file I needed to install to HSPL the Pure
"enablerapinew.cab"
basically the machine just would fail to load the HSPL without it
but it still functioned afterwards, does yours?
Do a search on XDA find and DL the cab (or I could attach a zipped copy)
If you can still access the device,
just copy enablerapinew.cab to any temp dir on the device
the execute it through fileexplorer
then go back to installing the HSPL (mine then worked fine)
If you haven't already, You should go to
http://forum.xda-developers.com/showthread.php?t=520312
you'll find troubleshooting info and a link to the extra cab there
If you really are bricked at this point , it sounds like nothing has actually
been changed on your device yet? its just frozen should be still under warrentee? Unless anyone else has a better suggestion you should be
able to return it for exchange to ATT
Good Luck
KJL
It sounds like Windows is not properly recognizing your device when it is plugged into the USB port while in SSPL mode.
Have you tried different ports?
Is there another computer you can use?
another thought about returning under warranty
on the boot page of the stock Pure it indicates HSPL 1.83.000
After you update the HSPL it will say HSPL "1.83.Olinex"
this normally an indication of a successful update,
but it will probably void your warranty if they just look at the boot screen
This is true for all Pure (and Tmobile Compact V) Rom upgrades
The Stock Pure came with 6.5 and therefore the 1.83.00 HSPL
The Diamond2s did not, so their solution which reverts to 1.63 <?>
will not correctly revert to 1.83.00 on the Pure.
No way to correct this yet as far as I know,?
All the "reverts" are geared toward the Diamond2s, not the Pure.
But If your boot screen indicates 1.83.00 before it freezes
I'm fairly sure its still entitled to a warranty repair/replace
How could they tell the cause of the failure
was a reburn as opposed to natural causes?
Good Luck
KJL
When you put the phone into a manual bootloader mode... Mobile Device Center becomes obsolete.
HardSPL is only needed for unofficial roms. Forget HardSPL for the time being. The goal here is to get your phone operational. Just download the official HTC WM6.5 WWE rom and flash that. Put phone in manual bootloader mode and run the Rom installer.
As long as your phone is in bootloader mode and says "USB"... then your set to go.
Another solution is to try another PC. You'd be surprised how often that will resolve your issues. Perhaps find an XP machine and install Activesync (so it loads the bootloader USB drivers). I had to do that on several occasions when my main PC refused to flash my mobile device.
I did both of the updates htc has for the pure. Both worked fine. I am on the origianal rom. It does reboot your phone and stays on the white screen for a min then it loads the update and the phone starts.
The offical ROM comes back with a wrong vender ID error I guess cause its a "pure" and not the HTC branded "topaz"... NOW what should i do??? Seems like i NEED hardspl so i can flash any ROM, as from what i researched, there IS NO AT&T Pure rom that has been released. I still cant figure out why a hard-reset will not work though.... This is REALLY starting to get me angry!!!
Just for reference, the Pure's ID is TOPA210 32M
SPL-1.83.0000
The official hotfixes worked fine for me as well. Did you apply the hotfixes on the original ROM that came with your Pure?
Also, does the official HTC Touch Diamond 2 ROM work for you? If so, the hotfixes for the Pure are irrelevant, as are any future updates released for the Pure. You should look for updates for the Touch Diamond 2 on the Worldwide HTC site.
If you needed to do a warranty claim, the closest you can get to returning your phone to stock/shipped form is to use the ROM dump using HardSPL and hope they don't notice that the SPL is different. Currently, there's no way to return the Pure back to completely official software.
A hard reset simply wipes everything off and restores everything back to what is contained in just the ROM you currently have on it. If you've flashed your phone at all, you've already wiped out the original ROM that came with it.
It is still the STOCK ROM. I have never flashed it yet.. The topaz rom will not flash due to a vender ID error. The spl is still stock also... i think thats is why i am having this problem. I bought the phone off craigslist so returning it to AT&T is NOT an option either way. My only solution is to find a fix. (or trash it) I really appreciate all of your suggestions and input so far. You guys are by far the best board around! I am a LONG time follower, but a few-time poster. Obviously i have little to contribute to the board.
Can I trouble you to dig up a few version numbers? It'd help evaluate your situation so we can see which options are best for your case.
ROM version? You can find this in Device Information. Start --> Settings --> System --> Device Information
Bootloader version? Do a soft reset while holding down the volume down button on the side until a screen with red, green, blue, and white, ordered top to bottom, shows up. It should be the second line starting with "SPL-..."
The ROM is the STOCK AT&T ROM (again...) I CAN NOT go to start;.... because if you noticed in the first post, the phone will not boot past the white "AT&T WorldPhone" screen... the spl is stock also incase you missed that part. (1.33.0000) I have never flashed the divice. EVERYTHING IS HOW AT&T SELLS THE PURE OUT OF THE BOX! NO MODS. NO FLASHED ROMS. NO HardSPL... NOTHING! STOCK!!! (for those overlooking the details in my previous posts) I have no doubt you guys (n hopefully a few girls ) will help me fix my issue. I'm just REALLY anxious for it to happen sooner than later!
Have you tried downloading the official rom here on xda and renaming it to TOPAIMG.nbh and update using the sd card method?
Here is the thread:
http://forum.xda-developers.com/showthread.php?t=600339
The download is in post #1
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
jromeo350 said:
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
Click to expand...
Click to collapse
You can flash hard SPL the same way by renaming the .nbh file to
TOPAIMG.nbh
jromeo350 said:
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
Click to expand...
Click to collapse
Actually that is supposed to be an officially signed rom. If that is true it will work with the stock spl. It will either work or it won't. Also, as stated in the response after yours, you can apply the hardspl via SD as well.