Related
Hey all,
I am sorry posting the repeated question again, but this has a bit of a twist, and to this, i searched and didnt find any answer around.
My friends just bought a HTC P3300 from China. It came with a chinese DOPOD rom.
I had the original Shipped htc rom with me there so i upgraded my 1st friends mobile, with the shipped rom successfully, and then upgraded it to wm6 successfully.
now when i flashed my 2nd friend's device with the HTC Shipped rom, the upgrade process went to 3% and then the device just restarted and got stuck on the Initial dopod boot screen.
It is not moving from there.
So i downladed a couple of other roms, including the DOPOD ship rom,. but when i try to upgrade it, it says " ERROR:200, The Upgrade Software is outdated" kinda message!
now can someone please guide me how can i bring alive my friends rom, what is it i should do to successfully install some rom in it in English.
Please help!
thanks a lot!
Hi all,,
Please someone help me out with this problem...
Which rom should i try, or what is the problem with this?
Thanks a lot.
Did you cid unlock the hone either with USPL or IMEIcheck? If so, you should be able to load an OEM rom back on the phone. Try the HTC WWE WM5 rom or the German WM6...I dont see any reason why an unlocked phone wont accept at least one of those.
hi itschase...
No, i dont know if it was cid unlocked or not.
About USPL or IMEICHECK, nothign was done on it.
As i mentioned, one phone got flashed successfully, but the other failed!
I have tried the HTC WWE WM5 shipped rom, if thats what u are hinting to, but not the German WM6.
I have a crazy idea...
My phone is not bricked, but I was able to try running the USPL ROM Update utility on my phone from bootloader. I have zero idea if this would unbrick your phone, but its worth a shot - cant get much worse (or can it?). Download the USPL file, and run just the rom update utility with your phone in bootloader. After it resets your phone, put it back into bootloader and try reinstalling an OEM rom. I am probably wasting your time, but its worth a shot....
s
aaaaa
llllll
Insane Devil:
you need original rom for your device (with correct model id).
this should flash your device.
in the future, install uspl on your device before upgrading rom.
regards,
Factory Roms should be able to help u out in this...?
itschase said:
I have a crazy idea...
My phone is not bricked, but I was able to try running the USPL ROM Update utility on my phone from bootloader. I have zero idea if this would unbrick your phone, but its worth a shot - cant get much worse (or can it?). Download the USPL file, and run just the rom update utility with your phone in bootloader. After it resets your phone, put it back into bootloader and try reinstalling an OEM rom. I am probably wasting your time, but its worth a shot....
Click to expand...
Click to collapse
Good Idea but ... not correct!
Your device might be CID locked and you were able to run USPL from bootloader, because ... you already have had USPL. Am I right?
hello, i have read and read all the wiki's, but ive not been able to fix my phone.
i use a cingular 8525 (herm100) phone, and cannot install any rom on the phone. I have two versions of the At&t ROM with radio's and tried them both, but they all stop at 11-12 %.
i have tried usind the sd-card method, and it does not pass the "GSM - " portion.
i guess the radio is not working or is corrupt or something..
my phone is now in bootloader and just says
HERM100
IPL-1.04
HERM100
SPL-2.03
please any help will be appreciated. thank you!!!!
wow.. can anyone even say "sorry"
geez.. 35 views, and not even one reply, or consolation message, or anything??
I would update your copy of Windows Mobile Device Center first (especially if you're using Vista). Flash SPL and the radio, then flash any rom to see what happens. I mean really at this point, it's already a brick... try some crazy stuff, you can't hurt it anymore than it already is. I did the same thing to mine a couple of months ago, and after trying these things, I got it working again without a problem.
update to hard spl ver.7.
try to flash
a). stock rom (sometimes this works)
b). radio only rom.
Also make sure you unlock your phone with this : http://forum.xda-developers.com/showthread.php?t=293665
Hope this helps...
ultramag69 said:
update to hard spl ver.7.
try to flash
a). stock rom (sometimes this works)
b). radio only rom.
Also make sure you unlock your phone with this : http://forum.xda-developers.com/showthread.php?t=293665
Hope this helps...
Click to expand...
Click to collapse
Just to make sure I understand, the unlocker you linked is to SIM and CID unlock, correct ?? And then on top of that - you should update to HardSpl also ??
I have an 8525 on its way that I will be looking to upgrade - just want to make sure I am understanding correctly.
roomtek*8525 said:
geez.. 35 views, and not even one reply, or consolation message, or anything??
Click to expand...
Click to collapse
sorry for the late reply
i have been dealing with this for 3 days and finally managed to run official AT&T rom for 4 days wout hard reset.
there is a method dumping an official himalaya rom to hermes. az pof explained in one of his posts all commands except radio commands are different in himalaya so it is safe to use dumping method.
it basically deletes everything in radio rom so you can install official rom.
PS: at first install official rom stucked %12 i said damn but in second try %15 third try success
i am at work now i dont have the link of method but try googling or searching my posts (not too much )
i hope it solves your problem
bartan
thanks guys, i've tried some things
i have tried using Hard SPL v.7 it does not work.
i have tried using official cingular roms too. stops at 11% no success.
i have tried upgraing radio only, stops a 0% and restarts the device.
i have also used mtty, with some text inputs, no success
i have even tried selling the brick on e-bay .... as you can guess no success.!
bill_in_mtl, sorry bout lateness of my reply ( net problems), yes you do unlock sim and cid. Sim unlock means you can use ANY simcard from any carrier and Cid unlock means you can flash ANY hermes rom (both official or cooked). It needs to be unlocked first as the spl is downgraded to 1.40 (I think) and you should REALLY be running with 2.10 olipro (hard SPL ver 7). I wouldnt bother upgrading to Hard SPL ver 9 a this is essentially only ver 7 with some neat features for developers but it does throw up an error message when you finish flashing a rom(no problems t just feels like it).
Hard SPL WON'T stop you from bricking your phone BUT it will make it easier to recover.
roomtek*8525, sorry to hear that but have you tried flashing with a cooked rom? This unfortunately wont fix the phone part but you will have a working PDA...If you've tried MTTY with info 8 and task 2a commands then thats the best to hope for, Sorry bout that..
Hello Everybody,
Let me start off by saying that this is the worst phone I've ever used. I had great expectations from this phone but never mind - I'm going to stick to my Excalibur.
This is the first time in my life that i actually bricked a phone. I installed a couple of cooked ROMs and everything went fine. I have experience with CID Unlocking and flashing ROMs. Anyways, all I did was try to flash back to the original Rogers ROM from the Original Shipped ROMS thread and that's when my phone got bricked.
I have searched and done everything possible so far and NOTHING WORKS!
So far I've done this:
1) I have tried flashing the Chinese ROM/Dopod WWE Asia ROM as their official HTC ROM's.
2) Done a hard reset
3) Loads into Boot Loader and the boot loader version is
IPL - 2.21.0002
SPL - 2.21.0000
4) Ran MTTY and i got gsecuritylevel=FF (which means install shipped ROM)
5) Tried running USPL but no luck
6) Tried installing Rogers ROM from the original shipped ROMS thread, still no luck as it gets to 3% and reboots
I seriously don't know what else to do. This is just ANNOYING!! Ive been sitting here for the past 4-5 hours trying to get this damn thing to work.
Is there a way to downgrade the SPL so I could flash a ROM?
Is there a free permanent CID Unock available?
Is there ANY WAY out there to unbrick a Rogers HTC TOUCH
(DAMN ROGERS !!!)
Finally, I'm trying the SD Card ROM Update method and hoping it works.
Mods, if you see this and know of a way to help me out, please do or anyone else who knows what to do so my life is back to normal, please help. Thanks in advance.
EDIT: Ok, I tried the SD Card method, it says Checking SD Card Contents and nothing happened, all i see is a tri color screen. The SD Card is 2 GB, is the only file present on the card and it was renamed accordingly (the .nbh file).
Please help as I'm going nuts trying to fix this.
Best Regards,
lukybandit
Anyone at all?
I've done all the searching I could and everything I've tried so far has failed on me.
I can get into the bootloader, get into the hard reset and even can run a mtty session and no matter what I do, it gets stuck at the HTC logo.
In addition to this, all ROM's that I have tried so far keep getting the Error 270 (Obviously due to not being able to even temporarily CID unlocking it).
I did notice a lot of people have bricked their devices and I figure if i can get into the boot loader screen then at least SOMETHING can be done.
Here is what i have learned.
I have the Rogers Touch, and i said SCREW IT, and going to pick up an AT&T Tilt.. I already have 2 S621's, 1 Tytn 2, and i need another phone for my dad.
I had the touch for 1 week and had the same problem as you. Here is what i gather.
1. YOU CANNOT - install the original ROM if you flashed the incorrect ROM
2. Because there is no HARD SPL, i used the USPL, which on reset will result in a CID relock.
3. In this condition, the only way to reflash if you can't get back into the regular today screen is a custom SPL, by Olipro or something.
But Olipro (i keep forgetting his name), charges 75 GBP which equates to $160CDN or so. I bought my HTC Touch used for $200CDN. Makes no sense to fix it. So i am going to try and sell this phone to someone who wants to fix it for cheap.
Sorry man, i looked EVERYWHERE for a fix, and there was NONE to be found, unless you use this guy , who has succesfully fixed everyone elses phone.
Honestly, if my phone was worth alot more than $200, i would pay him with no issue, but because the fix is the same as buying the same phone again, it makes no sense.
Are you serious?!!!
So there's no way for me to fix this piece of ****? frig man.
I paid for this and now I can't fix it?
Can Rogers find out that I tried playing around with the phone or not? I hope not because It's been only 3 days since I got this and it's been barely used.
If there's a fix, please let me know.
That's not even worth it. If there's someone out there that can fix it, please help - Thanks
P.S: Thanks for your response.
Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html
http://forum.xda-developers.com/showthread.php?t=347700
treid that?
Noonski said:
Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html
Click to expand...
Click to collapse
Yes, I think I did do a hard reset but I will try again in 5 mins. It was a bad flash cause it stopped in the middle I think.
Yup Both SD Card & SIM Card Removed.
Im guessing the only way I could fix this would be - get the original shipped ROM but so far I was only able to find a dump and not an actual update installer.
My SPL & USPL is 2.21 - So what do you recommend. upgrading the SPL and then trying to re-flash..
Would the TMobile ROM work because my phones Rogers branded and no Canada does not have the Vogue.
In answer to your question, it doesn`t go more than 2-3 % and then gives me an Update Error (270)
ahhh...this is driving me insane.
Thanks so much for the help so far. Really hope you guys can help me out here.
The main thing is if it flashes SPL only in general or if it does the same thing.
You might even try just flashing the SPL 1.11.11 from Pof from bootloader.
Or just flash the original SPL.
If it doesn't I don't know a way of unlocking in Bootloader.
But more heads will pop up with some Flashing Nightmares experiences soon.
Noonski said:
Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html
Click to expand...
Click to collapse
I just performed a hard reset and tried reflashing but still no luck. It gets to 3% then reboots.
In regards to what you attached, how do I go about doing it? Let me know. I downloaded the 2.26 SPL and the NL ROM.
Noonski said:
The main thing is if it flashes SPL only in general or if it does the same thing.
You might even try just flashing the SPL 1.11.11 from Pof from bootloader.
Or just flash the original SPL.
If it doesn't I don't know a way of unlocking in Bootloader.
But more heads will pop up with some Flashing Nightmares experiences soon.
Click to expand...
Click to collapse
Original SPL being Rogers (Can't find it anywhere except a dump)?
k I'll try flashing the SPL 1.11
- Any other thoughts, bro? Thanks!
Did u tried SD card flashing??
Yeah, I did.
I tried the .nbh from the Rogers Dump and it says Invalid Certificate. I tried this other .nbh which said Dead_Elfin, still no luck and the Dopod Asia
I'm so mad/upset and I've tried so many methods to fix it. Is there no way I can get the Rogers dump to work in any way?
Hey man!
Somewhere in this thread (2nd page) a guy refers to a ROM that revives your half-dead Touch, "if you trust him"!
But you don't have anything to lose at this point,
so check it out! The link to the ROM is still alive.
Good Luck!
Regards!
kokotas said:
Hey man!
Somewhere in this thread (2nd page) a guy refers to a ROM that revives your half-dead Touch, "if you trust him"!
But you don't have anything to lose at this point,
so check it out! The link to the ROM is still alive.
Good Luck!
Regards!
Click to expand...
Click to collapse
I tried that but it didn't work but I'm trying once more now. Hopefully it'll work.
lukybandit said:
I tried that but it didn't work but I'm trying once more now. Hopefully it'll work.
Click to expand...
Click to collapse
EDIT: Didn't work, updates to 3% then reboots. Just Great !!! This is so annoying.
Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.
Noonski said:
Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.
Click to expand...
Click to collapse
yeah, i meant the dumped Roger's ROM.
This is the most annoying thing I've ever had to deal with in terms of owning all my phones. I am selling this phone or returning it back the moment I fix it.
And I'd threaten but he hasn't done anything lol
I hope he does help me out.
Noonski said:
Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.
Click to expand...
Click to collapse
i think its time we make it clear to everybody that XDA means SHARING to help everyone out and not to ask for money in return for something. XDA should only be for those ppl who can work hard for everyone without asking for money.
This phone was the biggest mistake I ever made in my life. I'm sick and tired of this already and I still haven't been able to get it fixed.
LukyBandit
I tried everything that these guys told you to do, NOTHING WORKS.
We have an operator branded device and do not have an ORIGINAL ROM to load in other than a DUMP.
Thats why we are stuck.
I am looking for someone local GTA that might charge less, but yes your TOUCH is fukked unless you are willing to pay OLIPRO $160CDN to fix a phone thats worth $200ish.
I am buying a TILT today, its not worth the stupid touch to fix.
What a waste of money that was. I am so happy my TYTN2 and my soon to purchase TILT has a HARD SPL to it.
after my phone rebooted once the update was complete, it wont get passed the "at&T World Phone" white screen... SOMEONE PLEASE HELP ME!!!! i was using a stock at&t pure with the stock rom. i can not upgrade hardspl or ANYTHING any suggestions on how to get my phone to boot? hard-reset went through with no signs of failure but it still will not boot up after that finishes... sorry if its something im overlQQKing, but i just cant figure it out. n yes i have researched although obviously not enough at this point. Thanks to anyone who can help in advance. forgive my stupidity!!!
......
noone?????
The HTC Pure updates hosed my phone too, I had already applied hard-spl to my Pure and i've flashed it with dozens of roms. Since I was currently using one of the "Stock" AT&T roms posted on XDA I figured I could apply the updates. Unfortunately after applying the update my phone froze at the boot loader. I was forced to flash my rom using the memory card method and then restore a backup.
you could try putting the phone in SSPL mode manually, (reset button+volume down), the run hard-spl hard-spl in manual mode.
you can then flash your rom using the memory card method. (FAT32 formated memory card, rom file renamed to topaz.nbh copied to root of flash card, reset button+volume down to enter SSPL, power button to confirm flash).
All this assumes you've already tried to hard reset your Pure (reset button+vol up+vol down)
Thanks for the reply! Unfortunatly, i tried the manual method and after it hanging at 0% for about 5 minutes, i keep getting error [262] update error.. (communications error) is this becuase i can not sync with mobile device center (win7)? I really dont want to just have to toss the phone! I have had an at&t tilt, at&t fuze, and now the at&t pure, and this is the only phone i have had this problem with for some reason...
Try Unplugging Your Pure From the computer Take Out the Battery Put the Battery Back in Mean While Restart your computer and Press Power And Volume Down At the Same time on your Pure If its on the colored screen your good,..Make sure your system is online and your not downloading anything and plug in your Pure to the computer it give it about 2 minutes to download the HTC USB driver then once its done your phone will say USB on the bottom of the Red Green Blue And White four color screen Then open up one of your ROM's and Flash it,....Do You Have Windows Mobile Device Center Installed?
If Not here is the Link
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
If you do already you need to uninstall the Driver update for windows mobile media center then install it again .
i can get the bootloader screen just fine! i just can not get hardspl to flash onto it. it sits at 0% every time. the phone will not boot so i can NOT get into mobile device center. The tri-colored screen comes up with no problem and it says USB on the bottom, so the drivers are already installed. I even tried hard-reset and still no luck
There was an additional cab file I needed to install to HSPL the Pure
"enablerapinew.cab"
basically the machine just would fail to load the HSPL without it
but it still functioned afterwards, does yours?
Do a search on XDA find and DL the cab (or I could attach a zipped copy)
If you can still access the device,
just copy enablerapinew.cab to any temp dir on the device
the execute it through fileexplorer
then go back to installing the HSPL (mine then worked fine)
If you haven't already, You should go to
http://forum.xda-developers.com/showthread.php?t=520312
you'll find troubleshooting info and a link to the extra cab there
If you really are bricked at this point , it sounds like nothing has actually
been changed on your device yet? its just frozen should be still under warrentee? Unless anyone else has a better suggestion you should be
able to return it for exchange to ATT
Good Luck
KJL
It sounds like Windows is not properly recognizing your device when it is plugged into the USB port while in SSPL mode.
Have you tried different ports?
Is there another computer you can use?
another thought about returning under warranty
on the boot page of the stock Pure it indicates HSPL 1.83.000
After you update the HSPL it will say HSPL "1.83.Olinex"
this normally an indication of a successful update,
but it will probably void your warranty if they just look at the boot screen
This is true for all Pure (and Tmobile Compact V) Rom upgrades
The Stock Pure came with 6.5 and therefore the 1.83.00 HSPL
The Diamond2s did not, so their solution which reverts to 1.63 <?>
will not correctly revert to 1.83.00 on the Pure.
No way to correct this yet as far as I know,?
All the "reverts" are geared toward the Diamond2s, not the Pure.
But If your boot screen indicates 1.83.00 before it freezes
I'm fairly sure its still entitled to a warranty repair/replace
How could they tell the cause of the failure
was a reburn as opposed to natural causes?
Good Luck
KJL
When you put the phone into a manual bootloader mode... Mobile Device Center becomes obsolete.
HardSPL is only needed for unofficial roms. Forget HardSPL for the time being. The goal here is to get your phone operational. Just download the official HTC WM6.5 WWE rom and flash that. Put phone in manual bootloader mode and run the Rom installer.
As long as your phone is in bootloader mode and says "USB"... then your set to go.
Another solution is to try another PC. You'd be surprised how often that will resolve your issues. Perhaps find an XP machine and install Activesync (so it loads the bootloader USB drivers). I had to do that on several occasions when my main PC refused to flash my mobile device.
I did both of the updates htc has for the pure. Both worked fine. I am on the origianal rom. It does reboot your phone and stays on the white screen for a min then it loads the update and the phone starts.
The offical ROM comes back with a wrong vender ID error I guess cause its a "pure" and not the HTC branded "topaz"... NOW what should i do??? Seems like i NEED hardspl so i can flash any ROM, as from what i researched, there IS NO AT&T Pure rom that has been released. I still cant figure out why a hard-reset will not work though.... This is REALLY starting to get me angry!!!
Just for reference, the Pure's ID is TOPA210 32M
SPL-1.83.0000
The official hotfixes worked fine for me as well. Did you apply the hotfixes on the original ROM that came with your Pure?
Also, does the official HTC Touch Diamond 2 ROM work for you? If so, the hotfixes for the Pure are irrelevant, as are any future updates released for the Pure. You should look for updates for the Touch Diamond 2 on the Worldwide HTC site.
If you needed to do a warranty claim, the closest you can get to returning your phone to stock/shipped form is to use the ROM dump using HardSPL and hope they don't notice that the SPL is different. Currently, there's no way to return the Pure back to completely official software.
A hard reset simply wipes everything off and restores everything back to what is contained in just the ROM you currently have on it. If you've flashed your phone at all, you've already wiped out the original ROM that came with it.
It is still the STOCK ROM. I have never flashed it yet.. The topaz rom will not flash due to a vender ID error. The spl is still stock also... i think thats is why i am having this problem. I bought the phone off craigslist so returning it to AT&T is NOT an option either way. My only solution is to find a fix. (or trash it) I really appreciate all of your suggestions and input so far. You guys are by far the best board around! I am a LONG time follower, but a few-time poster. Obviously i have little to contribute to the board.
Can I trouble you to dig up a few version numbers? It'd help evaluate your situation so we can see which options are best for your case.
ROM version? You can find this in Device Information. Start --> Settings --> System --> Device Information
Bootloader version? Do a soft reset while holding down the volume down button on the side until a screen with red, green, blue, and white, ordered top to bottom, shows up. It should be the second line starting with "SPL-..."
The ROM is the STOCK AT&T ROM (again...) I CAN NOT go to start;.... because if you noticed in the first post, the phone will not boot past the white "AT&T WorldPhone" screen... the spl is stock also incase you missed that part. (1.33.0000) I have never flashed the divice. EVERYTHING IS HOW AT&T SELLS THE PURE OUT OF THE BOX! NO MODS. NO FLASHED ROMS. NO HardSPL... NOTHING! STOCK!!! (for those overlooking the details in my previous posts) I have no doubt you guys (n hopefully a few girls ) will help me fix my issue. I'm just REALLY anxious for it to happen sooner than later!
Have you tried downloading the official rom here on xda and renaming it to TOPAIMG.nbh and update using the sd card method?
Here is the thread:
http://forum.xda-developers.com/showthread.php?t=600339
The download is in post #1
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
jromeo350 said:
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
Click to expand...
Click to collapse
You can flash hard SPL the same way by renaming the .nbh file to
TOPAIMG.nbh
jromeo350 said:
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
Click to expand...
Click to collapse
Actually that is supposed to be an officially signed rom. If that is true it will work with the stock spl. It will either work or it won't. Also, as stated in the response after yours, you can apply the hardspl via SD as well.
a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
lilguy227 said:
a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
Click to expand...
Click to collapse
ok as from my knowledge you dont necessarily need to do task29 if its ur first time flashing (cuz i didnt and i got very good results) so i think u messed up in tht part.. but its ok, now you prolly want to first --> do a task29 again... second ---> get the nrg rom and flash it.... third -->get a radio of 2.10 or higher and flash tht....and just to play safe flash everything using custom ruu (i got better results using them...just saying)... also when u do each flash and its suspenseful dont boot up the phone, just take out the battery and back into bootloader.
hope this helps... report back lol
^thanks man
Okay so heres how it goes, my phone is def not bricked
custom ruu has only worked once for me
now whenever i try to use it it always gets stuck at 8%
i found that if i flash it at night and hard reset. wait til morning and turn on the phone
then it loads past the nrg screen and into the OS.
i'm currently trying to get it back to stock and i downloaded the tmobile update
but it doesnt seem to work, it also keeps stopping at 8%
i disable the anti virus stuff and i plug it in to the back of my computer
sounds like a defect
sorry to bust your bubble bro but it sounds like you got a classic case of a defective leo, i too did the same steps you did and it turns out my main board wasn't any good and the phone kept overheating, turns out when flashing custom roms they tend to put more pressure on the snapdragon then a regular stock t mobile rom. i know this sounds crazy but i believe it to be true, so with that said you got two options, one get back to t mobile customer care and get a replacement. or do what i did and find a repair shop and let them know that your leo either needs a new mainbaord or a new heatskin like mines did, it cost me 80 dollars which wasnt bad since my leo was a gift and i couldnt give it back to t mobile... hope that helps in some way
p.s. sorry for the edit but if you cant do either of those of what i suggested, try this get yourself a nice icepack nthe size of your phone and mount the leo on top of it whenever your using it, so that sucker wont overheat. once again i hope i helped