Maybe someone can help. I have used a lot of cooked roms without any problem. But the problem start with syrius R0... polaris was not booting. I revert to Diamond R8... everyting was OK.. after a while I tried Syrius R1....the same problem...I find theat if I take the sim out everything is working. I have tried other roms also: the last official rom, pdaviet v37, m-amine,
but the same problem...with sim is stop booting after the second splash screen, without sim all ar booting normaly... I have tried with 2 different sim from different providers. no way to make it boot. the onlisolution was to flash again udk diamond r8...anyone have any ideea?
......................
There is nobody with a ideea? please.... anyone of the developers...
Related
i flashed my artemis with official htc wm6 rom one night then with yue 11.1 wm6 wwe
everthing seems to be fine but i noticed that there is no change in
splash screen that appears first and even radio remains same after yue rom upgrade
then one more shocking thing i found out that i can't call and i m not reachable when somebody else tried to call me.
i tried upgrading the radio to 3.21 then also no improvement
flashed again with artemis 4.01 no use. no change in splash screen and radio also.
now i m with yue 11.3 rom everything is working but phone is searching for signals.
also tried another sim card also
plz suggest me some solution
i think you have to SIM unlock your phone... maybe this will help
http://wiki.xda-developers.com/index.php?pagename=Artemis_SimUnlock
and for the YuE.. all Yue ROMS seems that don't have splash screen and radio .. so nothing change in these.. and you can try to flash another radio.
hi all,
is there a know issue with HTC Artemis regarding WM6.1 ROM (Artemis_Touch_4.02_Full_with_4_sided_cube)?
every time I have to restart my HTC Artemis at least 3 times per day.
any ideas or commenst are welcome!
ForumKa
ive been using that rom for a while now on my xda orbit and ive had no such issues
Yes, me too. I move back to v4.01
No issues with me too. This artemis touch baby is working just fine.
maybe you should try hard reset
take backup and hard reset the phone
what is cube how it works ..can any 1 help me
Try to reflash. Sometimes a few files don't transfer the right way at first flashing. Try to flash ones again, I've never had problems with touch 4.02 (with or without cube) with radio 3.21.90. It's really stable!
Good luck.
I have the same... did you found a sollution?
I uses P3300 and the same ROM.
thanx thanx
Hi!
My Artemis just stopped booting.
All I see is the T-monile start screen.
I tried a softreset as well as a hard reset. nothing helped.
I can just enter the Bootloader.
CID is not unlocked yet.
g_cKeyCardSecurityLevel = FF
Is there a possibility to do this from bootloader and start a ROM update from Bootloader menu?
Original ROM is Austrian T-Mobile.
IPL 3.15.0001
SPL 3.15.0000
GSM 03.06.90
OS 3.15.0.0
hope somebody can help me.
I found an Austrian Original ROM for T-Mobile!
Now everything works fine!
http://rapidshare.com/files/294586683/CompactIIIUpdate.rar
hello everyone ....i want to upgrade my o2 orbit wm6 to wm 6.1 or any cooked rom currently i am using wm6 but the problem is my active syncro is not working is there any other to start uspl without acive syncro.....give some suggestions ...thank for ur time...
Hi i'm sebastiano, can someone help me pls?
i've buyed an htc p3450 with windows 6 , but i don't know the id and other codes.
i only know theese: ipl 2.20.0002
spl 1.11.0000
this morning i tried to change original rom with onyx 5.6
i've made this things:
i've installed cert.spcs.cab and enablerapi.cab
after using ELF_USPL_2.26.0000 i made the procedure for charge rom
and all were ok.
after i used the new os and its worked good. i made an hard reset before using definitively it. but after 10 minutes the system didn't start yet.
It run the image of Tim Operator and shut down.
The boot loader work now. i tryed to reinstall the sistem, the procedure finish without problem but when the system try to initialize the new rom , display the tim logos and after shut down..
someone know what i do and why system not reboot?
i read that i need the original italian rom for retry all my operations..but i don't know hot to find the id of my precedent rom...
pls help me
What's your actual IPL/SPL ? (you can see it in bootloader)
ipl 2.20.0002
spl 1.11.0000
theese are now
Do you know if it Elf or Elfin (Elfin is double memory), it's important if you have to flash a rom. Here's a link for original roms http://forum.xda-developers.com/wiki/index.php?title=Elf_Upgrades , none is Italian.
tito12 said:
Do you know if it Elf or Elfin (Elfin is double memory), it's important if you have to flash a rom. Here's a link for original roms http://forum.xda-developers.com/wiki/index.php?title=Elf_Upgrades , none is Italian.
Click to expand...
Click to collapse
yes it's surely elf because on the box the name is htc p3450/3452 Ita S
so elf isn't S i think is the xl model
now i'm going out, but if you can help me to know what is the problem, tomorrow we can meet again
i want to remove tim's brand and i will put in a good rom with large buttons
see you bb and thanks
As far as I know xl is elfin, and if you flashed the wrong rom maybe that's why you got this problem. Anyway here's a link to a good friend who's probably more expert on Italian roms than me, Flaviopak, send him a pm http://forum.xda-developers.com/member.php?u=778494
hey frnds, my htc touch elf working fine before updation...after updating to onyx 6.5.x initialy working gud but now when i insert sim, it constantly reboot...i hv done hard reset even instaled same rom twice but no luck plz help...thanx in advance.