Database Users

Complete guide to make TT5 work with a BT GPS on the JasJar

There are 3 key steps in making TomTom 5 work on an i-mate JasJar with a Bluetooth GPS.
Many tips are scattered around in different Forums.
Here is a COMPLETE overview of what to do.
STEP 1 : INSTALL TOMTOM5
You do this by copying the CAB files from the CDROM (eg F:\PocketPC) to the JasJar and launch one by one from there with the explorer of the JasJar.
You can install voices the same manner by copying the CAB files to the Jasjar (eg from F:\Voice on the CDROM)
STEP 2 : UPGRADE TO V5.1
http://www.htcclub.net/storage/ppcupd510.rar
Extract and copy the files to a folder on the JasJar and install them from there.
STEP 3 : ACTIVATE THE GPS CONTROL PANEL
Fire up a registry editor (eg http://www.freewareppc.com/utilities/phmregistryeditor.shtml )
Go to: HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
Delete the DWORD marked "hide"
Add a DWORD called "Group" and give it the value of "2" (dec)
The GPS panel will now show up in your connection settings.
STEP 4 : INSTALL TOMTOM5
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In BT, select the OUTGOING port to 8.
3. In the GPS control panel, select the GPS program to 0 and make sure that the hardware one, is set to None.
4. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 0 free. Select COM 0 and close TT5.
5. At the GPS control panel again, now select COM 8 (before we set it up at 0).
6. At BT: select OUTGOING port to 0.
7. Back again to GPS control panel and select NONE.
8. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
REMAINING PROBLEM
TomTom will only connect to the BT GPS when the Phone is switched on.
If you want to use your integrated car phone and just use the JasJar as GPS, you need to switch the Phone antenna off on the JasJar and the Bluetooth radio on (for the GPS connection). This worked perfectly before with TT3 and my i-mate PDA2K but now I am forced to activate the phone radio on the JasJar meaning that I can not use my car phone anymore !
I think it is a TT problem as I am able to connect to the GPS with other software without the phone radio switched on.
Any suggestions are welcome to solve this !

THANK YOU!

Hey i think i got something wrong in the registry :? I have:
HKEY_LOCAL_MACHINE\ControlPanel\GPS Setings
Then in there i have: defualt value not set
and
Group 0x2 (2)
I can't see a gps pael in my connection settings.Please help!!!!

jaythemagician said:
Hey i think i got something wrong in the registry :? I have:
HKEY_LOCAL_MACHINE\ControlPanel\GPS Setings
Then in there i have: defualt value not set
and
Group 0x2 (2)
I can't see a gps pael in my connection settings.Please help!!!!
Click to expand...
Click to collapse
I thought the same at first when I did it, no GPS panel. You have to make sure you exit the registry editor properly by Tools -> Exit, this saves the sertting. Then you need perform a soft reset of your device - after this, the GPS panel was now displayed on mine. Let us know how you get on

cheers for that sl9. Now my only poblem is getting it working.No matter what i do all i have in other bluetooth is:
qct data interface
RIL on COM6
COM7
serial cable on COM1
Infrared port
Ir on COM3
Any ideas?cheers

Follow the instructions in that post exactly and you should see COM0 appear in tomtom's GPS configuration screen... Try doing a hard reset, then try again. It does work

soft reset in between
I had trouble installing TT. My solution was: between every install/registry change: do a soft reset. Then do the next step and soft reset and so on...
Now it works like a charm!

jasjar crash
hi i follow ur guide but it crash all the time plz help

I tried to install TT5 and i have tried every way to do it but it will not install the ttn.cab it fails every time, i have soft reset after each cab install removed the sd card anyone any ideas
thanks
Chris

jaythemagician:
Open the file \Program Files\Navigator\navigator.cfg with an editor, you will see "COM7", change it to another COM port. In my case I changed it to "COM4" and now my JASJAR can connect to the Bluetooth GPS.

can't seem to find that in the reistry....

no, not in the registry, "navigator.cfg" is a file in the filesystem. Use windows explorer, have active sync running, then you find the file in "Mobile Device->My Windows Mobile-Based Device->\Program Files\Navigator" catalog

not quite related but when i installed TTN5.1 landscape would work, since update, on the reinstall the rotate menu option is now just a turn picture upside down so it dosent work in landscape anymore, ive tried clearing all traces and installing twice since update now

sorted it. Thanks everyone. One more thing....why does it run so slooooooow

How did you guys install your maps? Normal setup, or another way?

maps are in folders on root of SD card, ie Great-Britain-Map, TTN5.1 just see's them and you choose it during the installation wizard on the JJ

hi Parw
what editor u use to open navigator.cfg file because i used notepad nad wordpad i can see only the boxes
Regards
Gugi

Hello,
How can I install the folder "voices" because this folder is not a ".cab" on my TT5 sd ?
Thanks for your help....

gugi_sat:
Two things:
1. If you don't see a COM port in the cfg file. Open tomtom and select COM7 in the GPS configuration. Close tomtom, the cfg file should now have been updated with the new port setting.
2. To be sure that you don't mess with the cfg file use a hexeditor. You will find one here -> http://www.hhdsoftware.com/free-hex-editor.html#Download

Hi parw
thanx for reply
i am not able to go that far in tomtom because it just stop after wizards
and i am using wired tomtom gps.
Please read my post below which explain the problem i have
http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=5377&catid=26
Regards
Gugi

tomtom navigator 3

After having many troubles and failing to get tomtom 5 running on my mini s.
Just like to know if tomtom navigator 3 is compattable with mini s?
I can get original software on cd with major roads of europe for £30.

Not sure if it works. if it does you will have to copy the cabs over manually as the installer will almost certainly not work.
On a side not, personal experience with TTN3 & BT GPS was very bad, so bad infact that i ditched my TTN3 and used an old copy of 2 until i replaced my GPS with a wired (was CF in an iPaq).
Maybe it was a fault with the iPaq BT stack but i used to get random disconnects while driving and it basically made TTN3 useless. Just a point as you cant use a wired GPS with the Wizard...
Also, if you need help with TTN5 read the current posts, and if you still have problems make a new post saying what you have done, and what you are having problems/errors with.

For me it was easy to make TT5 running on my Wizard. I wrote this about installation (sorry, it's in french and I will soon add some printscreen)
here is the link

I used this guide and got Tomtom 5 working a treat hope this helps
Surefire method of installing TomTom Navigator on your K-JAM
This post is in no offense to anyone who has previously posted a quick tutorial or a quick-and-dirty method of installing TomTom Navigator 5.10 on the K-JAM (or Windows Mobile 5.0 for that matter), but there has been a lot of inconsistencies with where files are to be placed, how things should be installed and in what order, and if some steps need to be performed or not. In addition, the fact that it's likely coming from people who don't have English as a first language, it makes it very hard to follow otherwise simple directions on how to get this program properly installed and running on one's K-JAM.
Thus, I have detailed a step-by-step procedure based on completely on firsthand experience, and repeated for verification. It requires your K-JAM (obviously), your ActiveSync'ed desktop, your Bluetooth GPS device, and the original CAB/voice/map files. What is important in my method is that I did NOT have to perform any install of 5.00, followed by 5.10, and I did not have to perform any registry changes to enable the GPS applet in Windows Mobile 5.0, either.
Please keep in mind that TomTom Navigator 5.10 is not officially compatible with Windows Mobile 5.0, so you are not likely to get any support on the product on this OS.
Download the latest version of the TomTom Navigator application from their website.
Install the map files onto your mini-SD card. It should be placed right at the root, and will have a path on your K-JAM, such as:
\Storage Card\New-England_and_Mid-Atlantic-Map
Power on your Bluetooth GPS, and prepare it for pairing, if necessary.
Go to your Comm Manager and enable the Bluetooth radio on K-JAM and pair your Bluetooth GPS to it.
Once properly paired, put a check next to Serial Port as the device's available service.
Minimize the on-screen keyboard, if necessary, and click on the next tab labeled COM Ports.
Click New Outgoing Port and select COM6, while leaving Secured Connection still checked. Your device should now be listed with (COM6) next to it.
Install all the CAB files in the following order:
GPS.CAB - the conduit between TomTom and your Bluetooth COM port
PIMAddIn.CAB - the conduit between TomTom and your Outlook contacts
WZD.CAB - the Today plug-in (completely optional)
TTN.CAB - the actual application and data files
If you are getting any issues with installing any of the CAB files, try soft-resetting and launch the same CAB file again.
On your desktop, launch Notepad.
Type & \Storage Card\New-England_and_Mid-Atlantic-Map\ or whatever the name of your main map folder is on your mini-SD card. Do not forget to add the final backslash and a have a space between the ampersand and the first backslash.
Save the file as CurrentMap.dat. Make sure it doesn't end up as CurrentMap.dat.txt!
Create a folder on your K-JAM called \My Documents\TomTom.
Copy your newly created CurrentMap.dat file from your desktop into \My Documents\TomTom on your K-JAM.
Create a folder on your K-JAM called \TomTom\TomTom. Yes, strangely enough, that is a TomTom folder under the TomTom folder on the root of the device.
Copy your (celebrity or standard) voice files into the \TomTom\TomTom folder.
Soft-reset your K-JAM to allow the Today plug-in to show up and the TomTom Navigator icon to appear in the Start Menu. If the Today plug-in doesn't show up, it's likely that it's simply disabled in the Today plug-ins list, and you can enable it later.
Launch TomTom Navigator.
Set up your preferences (left/right-hand, time format, voice, etc.)
Your map should now be automatically selected and loaded, based on steps 9-13.
Activate your map through the normal registration methods.
Configure your Bluetooth device as Other Bluetooth GPS and select COM6: as your port.
Confirm that your Bluetooth device is working by clicking on the GPS signal strength indicator on the bottom-right of the screen, then the same indicator on the right on the following screen.
That's it! Enjoy your TomTom Navigator on your K-JAM!
Credits:
http://forum.xda-developers.com/viewtopic.php?t=28386
http://www.howardforums.com/showthread.php?t=742385
http://forum.xda-developers.com/viewtopic.php?t=27641
http://forum.xda-developers.com/viewtopic.php?p=160768
I hope this step-tested, detailed tutorial will be the end-all solution for everyone having issues in getting TomTom up and running on their K-JAMs, as I've been sharing the pain with everyone trying to get some sort of navigation software working on Windows Mobile 5.0. Now, you can take a breather and go travel somewhere with your new toy and not have to worry about surfing to MapQuest.com on an EDGE connection in the middle of nowhere.
By the way, my Bluetooth GPS device is the GlobalSat BT-338 GPS, a SiRF III device that can be picked up real cheap from MadMonkeyBoy. There is a firmware update to 3.1.1 available here.
NOTE: If you've tried the other methods posted elsewhere that instruct you to enable the GPS applet by modifying the registry and so forth, you can either hard reset your device and follow my step-by-step method above, or reverse their work by performing the following steps:
Go to the GPS applet under Settings.
Change both the GPS communication and hardware COM ports setting back to None.
Go to the last tab and uncheck "Manage GPS Automatically."
Lastly, disable the applet entirely by adding the Redirect null string value back to that GPS Settings key in the registry. (See those previous instructions to find the exact location in the registry and simply put back the entry you deleted or changed.)
Soft-reset your K-JAM for changes to take effect.
Remember, TomTom Navigator 5.10 is NOT designed for Windows Mobile 5.0 natively, so you can't expect the OS to manage something that older navigation software is not expecting the OS to.
Finally, if for whatever reason you're not able to communicate with your Bluetooth GPS properly because you're working from a failed install from previous instructions, try to delete the Outgoing COM Port entry, followed by the entire partnership between your K-JAM and the GPS device, then start again.
UPDATE: I have removed the link to the TomTom Navigator installer CAB files. You can visit www.tomtom.com and download it from there. Also, you can install the voices to the \Voices or \Storage Card\Voices folder.

Can an admin quote/copy the above post and sticky it for a couple of months - save a new "tomtom 5 help" post every few days.
Please?

But does Tomtom Navigator 3 work on Wizard? If so, how does one install it?

Complete Idiots Guide to Installing TomTom 5

Hi
Somehow I feel I must have been a complete idiot with all of the problems I had trying to install TT5. Some of my problems were due to impatience, some stupidity, but most of all the really poor instructions from TomTom and the lack of any meaningful support from TomTom.
I hope this guide will save a few other people a frustrating experience setting upTomTom5.
Most of the following is based on different posts from many other individuals on the XDA-Developers and PocketGPSworld to name a few of them
paulrousseau
noony
Weatheryoko
Do not try to run the TT5 software until told to do so. It is a good idea to read the whole process before you start. If you have already tried a few times to install and failed it is probably a good idea to uninstall the app and start again following the steps below.
STEP 1 : INSTALLING TOMTOM5 Application Install
Option 1
Try this first it works for some people but not always, but you will need Activesync set up and a windows PC.
1) Insert the Software Applications disc into your PC and allow it to auto run.
2) Accept the License and tick the install application option. This will install the software to your Universal. Make sure you install to the PDA and not to the SD card. This will also install the default voice files.
4) Follow the on screen instructions on the PDA. DO NOT run the TT5 software at this point.
If this does not work or you have an Apple Mac or Linux machine then try Option 2 otherwise go to STEP 2
Option 2
1) Copy the CAB files from the CDROM (e.g. F:\PocketPC) to your SD card on the Universal and launch each CAB one by one from there with explorer on the Universal.
2) Install voices in the same manner by copying the CAB files to the Universal (e.g. from F:\Voice on the CDROM)
STEP 2 : INSTALLING TOMTOM5 - UPGRADE TO latest version.
if you do not have the latest version find an updated version on the HTC Club site. http://www.htcclub.net Extract and copy the files to the SD card on the Universal and install them from there.
STEP 3 : INSTALLING TOMTOM5 - Map Installation
Do not follow the install to PDA option on the TT5 map disc menu as this just does not work on the universal.
1) Put your SD card in a reader attached to your PC.
2) Insert the correct Map disc for your country (UK is disc 1).
3) Accept the License and tick the install maps option.
4) Then select the install to SD card option and install the new map to the card reader (you select the location - where to install the map during the install process) this may take some time depending on the speed of your SD Card. Repeat for each map you wish to install to your SD card.
5) Replace the SD card in to the Universal then simply run the TomTom5 application on your Universal.
6) Follow the prompts and you will go to TomTom5 options, here select change map and select from the one/s that you have installed through the card reader.
STEP 4 : INSTALLING TOMTOM5 Registration
1) You should now select the register automatically option as the manual process does not seem to work a lot of the time.
2) You will now need the registration card that came with the TT5 software. Enter the 3 x 5 character pin codes and the TomTom server will then authenticate your software.
STEP 5 : INSTALLING TOMTOM5 Activate the WM5 GPS control panel
1) Fire up a registry editor (I used Resco regedit but you could use a free one such as http://www.freewareppc.com/utilities/phmregistryeditor.shtml )
2) After opening the Reg Editor Go to: HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
3) Tap the screen on the DWORD marked "hide" and select delete form the menu.
4) Add a DWORD called "Group" and give it the value of "2" (dec) do this by tapping GPS Settings and selecting the option add DWORD. Make sure you exit your Registry editor correctly.
5) You will now need to perform a soft reset for these changes to take effect.
6) After the soft reset check you have successfully activated the GPS control panel by going to: Start>Settings>Connections. If you do not see it repeat this step as you have not correctly edited the registry.
STEP 6 : INSTALL TOMTOM5 - Set up the Bluetooth link to your GPS receiver
1) Go out side to perform this step. Some receivers require visibility of the GPS satellites for this step to work so it is best carried out in the open air.
2) Establish a Bluetooth bond with your GPS and in the WM5 settings select the checkbox for serial access.
3) In the Bluetooth entry on the universal for your GPS receiver set the OUTGOING port to 8.
4) Go back to the WM5 GPS control panel, select the GPS program port and set this to 0 and make sure that the “hardware one” is also set to None.
5) Start TT5 and in the GPS settings, select “another Bluetooth GPS”, and you will see COM 0 free. Select COM 0 and close TT5. (If you have been impatient and run the TT5 software too soon you can get to this by the following- Tap the map part of the screen >Change preferences> scroll left till you see “show GPS status” click “configure” select “another Bluetooth GPS”, and you will see COM 0 free. Select COM 0 and close TT5.
6) Back to the WM5 GPS control panel again, this time select COM 8 (before we set it up at 0).
7) Now got to WM5 Bluetooth: select OUTGOING port to 0.
8) Back again to GPS control panel and set GPS program port to NONE.
8. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
I was using the Parrot 3400 GPS receiver which incorporates a hands free car kit, if you are using a Parrot 3300 or 3400 you will need to go to the GPS section and activate the GPS part. Remember you can either use the Universal for both mobile phone and GPS or you can use a separate Mobile phone. I use a Motorola Razor. If you wish to use a separate phone then set up the BT pairing with the phone first before you activate the GPS. After this when you have set up the GPS part you will see the Parrot screen tries to set up GPS first. If you do not need GPS for a particular journey then you need to press the red button at the connect GPS message and the Parrot will proceed to pair with your Mobile phone.
As I said at the beginning this is the idiots guide and probably has more detail then most people will need but I hope this helps someone through what I initially found was a very painful and frustrating process.
Regards
Charlie

How to make your TomTom work again after putting card in

If, like me, you have used your TomTom software card in one phone, and then upgrade to another phone (e.g. going from XDA IIi to XDA Exec like I did), you will probably find that when you run the software it displays the splash screen then goes off. After contacting TomTom they suggested buying new software!!!! So, I paid a pound to a guy on eBay for this information!
Firstly, go to >PROGRAMES >FILE EXPLORER > MY DEVICE > STORAGE CARD > and the folder named 2577
The following 4 files should be in there.
Gps
PIMAddIn
Ttn
Wzd
( AND 1 OR 2 TOMTOM START .EXE FILES, DO NOT USE THEM UNTIL AFTER RELOADING THE 4 FILES)
Click on each file in turn, the device may need to be soft set after one or two of them ( it will tell you if you have to!)
After you have initiated all 4 files, your tom tom will at last work again!
(START BY USING THE TOMTOM.EXE IN FOLDER 2577)
IMPORTANT :
PEOPLE WITH BACK UP VERSIONS.
If you have tried installing the update (5.21) from the tomtom web site, make sure you uninstall it first, delete tomtom & navigation folders on your device then reinstall your original back up copy before completing the above fix.
******************* UPDATED Thurs. 11th May 2006******************
There are a few GPS problems with "Tomtom Navigator 5" & "Windows Mobile 5” on certain devices. Some "Windows Mobile 5" devices have a slightly stripped down version called "MOBILE 5 PPC Phone Edition GSM"
These devices have problems with com ports (ONLY COM 6 &7 AVAILABLE). All Tomtom GPS receivers work fine, but other branded receivers can have recognition problems. If your device has this problem, use the TomTom com port fix..........
Click to expand...
Click to collapse

WM6 Typhoon bugs and issues

It would be may be good to create a list of known bugs and other problems with the WM6 ROM for Typhoon. Please post here if you know about some bugs or strange behaviour.

I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...

lot of software incompability, mostly games,
-bug tcmp looks like the same most games have; there is sound but the screen will freeze in a few seconds (sound continues )

..tried to add T9 language according to instructions described at Ronswens pages for WM5. During writing sms I can choose the new language, but after choosing it only beep occurs when pressing a key. I suppose there should be changed also some another key in registry...do we have some experiences already with the T9 languages on this WM6 rom?

Netopjer said:
I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...
Click to expand...
Click to collapse
I have this problem too and I back to wm2k3

r0c0 said:
lot of software incompability, mostly games,
Click to expand...
Click to collapse
I have found the decision:
1)
We open "exe" a file with game in any HEX-editor, we find gx.dll and it is replaced on g0.dll
We clean the signature from a file by means of SignRemv and it is done new by means of Signed tool
To place the changed file back, and a file g0.dll to place in folder Windows
or 2) To replace a file gx.dll in folder Windows, in any a file-manager to put "read only" and restart (there can be problems with other programs)
As example Bustem
PS: forgive for my bad English

Netopjer said:
I have been using this rom since yesterday and after few restarts, the phone remains stuck for about 3 minutes in the "mobile operator" screen during start up. Eventualy it asks for pin code, but after typing in, the time, operator and appointments information is missing in the home screen. I have flashed WM6 once again, but this phenomenon occurred again after application unlock and installation of basic software (xbar 2.5, pocket controller, Binaries smart explorer, auto keylock, smart time sync) + few restarts. Now I am searching for the reason if this is caused by some registry entry or by an incompatible software installed...At present I removed all the software but problem still present. Ready to make registry clean or hard reset...
Click to expand...
Click to collapse
how do you make application unlock on wm6 ?

Java
is there Java support with this WM6 ROM? I can't seem to find it. Very useful for Opera Mini and Gmail standalone app.

sebip said:
how do you make application unlock on wm6 ?
Click to expand...
Click to collapse
Use regeditSTG2.exe to modify the following phone registry keys:
- HKEY_LOCAL_MACHINE\Security\Policies\Policies0001001 = 1 (that will enable the rapi_config, 1 means full access to rapi config, 2 means user controlled access)
HKEY_LOCAL_MACHINE\Security\Policies\Policies0001005 = 40 (that disallows the check for security cirtificate etc)
HKEY_LOCAL_MACHINE\Security\Policies\Policies0001017 = 144
Run SDA_ApplicationUnlock.exe from the PC with the phone connected via ActiveSync. This will unlock the phone.
Disconnect and switch the phone off then back on again.

Hi,
I can't use voice talk (via handset bluetooth) before in wm2k3 and wm5 i have the fonction to add voice command with contact, but now no.
It is normal ?
Thx.

...I also revealed interresting behaviour when you are trying to connect to internet via GPRS. There sometimes occurrs error message that it couldnt be established GPRS connection because of missing GPRS coverage. (the "G" is also missing in homescren icon bar). But I am sure there is no GPRS coverage problem in my location.
So in this case you have to go into the phone settings and choose your network again. Afterwards when you are re-registerd in your network, the symbol G is present in iconbar and you can run the GPRS connection. Sometimes prolongomenous procedure...

I had pretty much the same thing as a few of the others.
Xphone11
WM5 - WM6
It flashed all ok, the phone booted all good and worked fine - but then after around 15 min of running, reciving one call and 3 failed attempts at sycning it died.
Well - actually, I re-booted it for something and it never came right after that.
These are the issues which appeared;
Contacts wouldn't open (yet the proccess was fired),
Calendar threw a 'missing file' error,
Start menu wouldn't work (no response from the button),
GPRS service was dropped ("no service available" - even though there was and the phone could see it if you seeked for it),
Yet the phone recived text messages while in this state and while calling the phone it just wouldn't do anything - yet to the caller it would appear to just ring and ring (not a provided service).
An interesting thing - I found that by making a change to the home screen or theme would allow the start menu too function as it should and the the clock to be displayed on the home screen.
Could be an area worth investigating....
I've had a taste now.... I want WM6!!!
What can I do to help?

...it also would be interresting to know whether there is a possibility to run the USB modem - I couldnt find it in start menu/accesories nor in the windows folder...

How to install for QTEK 8020 (T-Mobile SDA) joystick? please help... fuctional joystick in WM06 (my english low sorry)... right is up, left is down and left not functional and right... ???
///... please delete topic... ///

I am also wondering why nobody who is capable enough tries to make a "joystick-version" of the Typhoon WM6 - that work would be highly appreciated by so many people...

DoctorT said:
I am also wondering why nobody who is capable enough tries to make a "joystick-version" of the Typhoon WM6 - that work would be highly appreciated by so many people...
Click to expand...
Click to collapse
Because WM6 for Typhoon Error on Dumprom.

WM6 looks fantastic, however...
I also have a few disappointments the most important of which are:
- No "Headset" option in the profiles menu!!!
- No STK menu!!!
- Very easily crashing on games and some progs (hope to fix it as stated above)
and the camera is definately worse than in 2003SE

..various language t9 cab files - I tried it and it works fine on WM6
http://melgurth.ovh.org/

do anyone try the standard calculator in wm6 ? It show error in my c500 so I have to use other calculator program

..it looks that my calculator works properly...