How to make your TomTom work again after putting card in - JASJAR, XDA Exec, MDA Pro General

If, like me, you have used your TomTom software card in one phone, and then upgrade to another phone (e.g. going from XDA IIi to XDA Exec like I did), you will probably find that when you run the software it displays the splash screen then goes off. After contacting TomTom they suggested buying new software!!!! So, I paid a pound to a guy on eBay for this information!
Firstly, go to >PROGRAMES >FILE EXPLORER > MY DEVICE > STORAGE CARD > and the folder named 2577
The following 4 files should be in there.
Gps
PIMAddIn
Ttn
Wzd
( AND 1 OR 2 TOMTOM START .EXE FILES, DO NOT USE THEM UNTIL AFTER RELOADING THE 4 FILES)
Click on each file in turn, the device may need to be soft set after one or two of them ( it will tell you if you have to!)
After you have initiated all 4 files, your tom tom will at last work again!
(START BY USING THE TOMTOM.EXE IN FOLDER 2577)
IMPORTANT :
PEOPLE WITH BACK UP VERSIONS.
If you have tried installing the update (5.21) from the tomtom web site, make sure you uninstall it first, delete tomtom & navigation folders on your device then reinstall your original back up copy before completing the above fix.
******************* UPDATED Thurs. 11th May 2006******************
There are a few GPS problems with "Tomtom Navigator 5" & "Windows Mobile 5” on certain devices. Some "Windows Mobile 5" devices have a slightly stripped down version called "MOBILE 5 PPC Phone Edition GSM"
These devices have problems with com ports (ONLY COM 6 &7 AVAILABLE). All Tomtom GPS receivers work fine, but other branded receivers can have recognition problems. If your device has this problem, use the TomTom com port fix..........
Click to expand...
Click to collapse

Related

tomtom navigator 3

After having many troubles and failing to get tomtom 5 running on my mini s.
Just like to know if tomtom navigator 3 is compattable with mini s?
I can get original software on cd with major roads of europe for £30.
Not sure if it works. if it does you will have to copy the cabs over manually as the installer will almost certainly not work.
On a side not, personal experience with TTN3 & BT GPS was very bad, so bad infact that i ditched my TTN3 and used an old copy of 2 until i replaced my GPS with a wired (was CF in an iPaq).
Maybe it was a fault with the iPaq BT stack but i used to get random disconnects while driving and it basically made TTN3 useless. Just a point as you cant use a wired GPS with the Wizard...
Also, if you need help with TTN5 read the current posts, and if you still have problems make a new post saying what you have done, and what you are having problems/errors with.
For me it was easy to make TT5 running on my Wizard. I wrote this about installation (sorry, it's in french and I will soon add some printscreen)
here is the link
I used this guide and got Tomtom 5 working a treat hope this helps
Surefire method of installing TomTom Navigator on your K-JAM
This post is in no offense to anyone who has previously posted a quick tutorial or a quick-and-dirty method of installing TomTom Navigator 5.10 on the K-JAM (or Windows Mobile 5.0 for that matter), but there has been a lot of inconsistencies with where files are to be placed, how things should be installed and in what order, and if some steps need to be performed or not. In addition, the fact that it's likely coming from people who don't have English as a first language, it makes it very hard to follow otherwise simple directions on how to get this program properly installed and running on one's K-JAM.
Thus, I have detailed a step-by-step procedure based on completely on firsthand experience, and repeated for verification. It requires your K-JAM (obviously), your ActiveSync'ed desktop, your Bluetooth GPS device, and the original CAB/voice/map files. What is important in my method is that I did NOT have to perform any install of 5.00, followed by 5.10, and I did not have to perform any registry changes to enable the GPS applet in Windows Mobile 5.0, either.
Please keep in mind that TomTom Navigator 5.10 is not officially compatible with Windows Mobile 5.0, so you are not likely to get any support on the product on this OS.
Download the latest version of the TomTom Navigator application from their website.
Install the map files onto your mini-SD card. It should be placed right at the root, and will have a path on your K-JAM, such as:
\Storage Card\New-England_and_Mid-Atlantic-Map
Power on your Bluetooth GPS, and prepare it for pairing, if necessary.
Go to your Comm Manager and enable the Bluetooth radio on K-JAM and pair your Bluetooth GPS to it.
Once properly paired, put a check next to Serial Port as the device's available service.
Minimize the on-screen keyboard, if necessary, and click on the next tab labeled COM Ports.
Click New Outgoing Port and select COM6, while leaving Secured Connection still checked. Your device should now be listed with (COM6) next to it.
Install all the CAB files in the following order:
GPS.CAB - the conduit between TomTom and your Bluetooth COM port
PIMAddIn.CAB - the conduit between TomTom and your Outlook contacts
WZD.CAB - the Today plug-in (completely optional)
TTN.CAB - the actual application and data files
If you are getting any issues with installing any of the CAB files, try soft-resetting and launch the same CAB file again.
On your desktop, launch Notepad.
Type & \Storage Card\New-England_and_Mid-Atlantic-Map\ or whatever the name of your main map folder is on your mini-SD card. Do not forget to add the final backslash and a have a space between the ampersand and the first backslash.
Save the file as CurrentMap.dat. Make sure it doesn't end up as CurrentMap.dat.txt!
Create a folder on your K-JAM called \My Documents\TomTom.
Copy your newly created CurrentMap.dat file from your desktop into \My Documents\TomTom on your K-JAM.
Create a folder on your K-JAM called \TomTom\TomTom. Yes, strangely enough, that is a TomTom folder under the TomTom folder on the root of the device.
Copy your (celebrity or standard) voice files into the \TomTom\TomTom folder.
Soft-reset your K-JAM to allow the Today plug-in to show up and the TomTom Navigator icon to appear in the Start Menu. If the Today plug-in doesn't show up, it's likely that it's simply disabled in the Today plug-ins list, and you can enable it later.
Launch TomTom Navigator.
Set up your preferences (left/right-hand, time format, voice, etc.)
Your map should now be automatically selected and loaded, based on steps 9-13.
Activate your map through the normal registration methods.
Configure your Bluetooth device as Other Bluetooth GPS and select COM6: as your port.
Confirm that your Bluetooth device is working by clicking on the GPS signal strength indicator on the bottom-right of the screen, then the same indicator on the right on the following screen.
That's it! Enjoy your TomTom Navigator on your K-JAM!
Credits:
http://forum.xda-developers.com/viewtopic.php?t=28386
http://www.howardforums.com/showthread.php?t=742385
http://forum.xda-developers.com/viewtopic.php?t=27641
http://forum.xda-developers.com/viewtopic.php?p=160768
I hope this step-tested, detailed tutorial will be the end-all solution for everyone having issues in getting TomTom up and running on their K-JAMs, as I've been sharing the pain with everyone trying to get some sort of navigation software working on Windows Mobile 5.0. Now, you can take a breather and go travel somewhere with your new toy and not have to worry about surfing to MapQuest.com on an EDGE connection in the middle of nowhere.
By the way, my Bluetooth GPS device is the GlobalSat BT-338 GPS, a SiRF III device that can be picked up real cheap from MadMonkeyBoy. There is a firmware update to 3.1.1 available here.
NOTE: If you've tried the other methods posted elsewhere that instruct you to enable the GPS applet by modifying the registry and so forth, you can either hard reset your device and follow my step-by-step method above, or reverse their work by performing the following steps:
Go to the GPS applet under Settings.
Change both the GPS communication and hardware COM ports setting back to None.
Go to the last tab and uncheck "Manage GPS Automatically."
Lastly, disable the applet entirely by adding the Redirect null string value back to that GPS Settings key in the registry. (See those previous instructions to find the exact location in the registry and simply put back the entry you deleted or changed.)
Soft-reset your K-JAM for changes to take effect.
Remember, TomTom Navigator 5.10 is NOT designed for Windows Mobile 5.0 natively, so you can't expect the OS to manage something that older navigation software is not expecting the OS to.
Finally, if for whatever reason you're not able to communicate with your Bluetooth GPS properly because you're working from a failed install from previous instructions, try to delete the Outgoing COM Port entry, followed by the entire partnership between your K-JAM and the GPS device, then start again.
UPDATE: I have removed the link to the TomTom Navigator installer CAB files. You can visit www.tomtom.com and download it from there. Also, you can install the voices to the \Voices or \Storage Card\Voices folder.
Can an admin quote/copy the above post and sticky it for a couple of months - save a new "tomtom 5 help" post every few days.
Please?
But does Tomtom Navigator 3 work on Wizard? If so, how does one install it?

TomTom 5.21 on XDA EXEC

This might be the least of some people problems, buth has anyone got the 7 digit postcodes to work yet on Tom Tom5.21? Was fine on XDA2. I tried copying files to various zip directories as described on the TomTom web site but to no avail.
Geoff
Do you have an empty folder on your Storage card called "Tomtom". If not add one and try again.
geoff247 said:
This might be the least of some people problems, buth has anyone got the 7 digit postcodes to work yet on Tom Tom5.21? Was fine on XDA2. I tried copying files to various zip directories as described on the TomTom web site but to no avail.
Geoff
Click to expand...
Click to collapse
Yes works fine on my k jam, o2 exec, mda vario. Out of interest is yours a proper version?
TT 5.21
I bought TT5 with Western Europe maps. I wanted to run that with a GlobalSat BT338 receiver. Installation was a nightmare but I finally managed. When I got to activating maps it failed even though I obtained an activation code. Got in touch with TT support. After a few email exchanges I received a note that my order had been cancelled. However, they had charged my credit card for over 200 euros!!! :twisted:
No more contact from them since then and I am stuck with a non-functional product!! I might sue.
Have since got OCN5. Installlation worked like a charm. Including map activation all was done in less than an hour. Navigation works perfectly!
Way to go OnCourse!!
Conclusion: If you are planning to get TT5.21 for your QTEK9000/I-mat etc. my recommenation is DO NOT!!!
Sorry for the rant.
GREAT FORUM!
TomTom 5.21 on XDA EXEC postcode problem
I have a legit copy of TomTom. I have tried creating various directories both full and empty on the device and on the storage card, but it still refuses to recognize 7 digit postcodes. If TomTom support get back to me with a fix that works I'll post it here.
Geoff
don't know what you guys are doing but 5.21 works fine on my xda exec.... I was even more chufed to find that the some key on te keyboard can act as shortcuts ... like pressing "c" switches between day mode an night mode etc.
I done nothing special... just took my sd card from my old ipaq 4700 that already had the maps etc. put it in de xda and instaled 5.21 straight on (Instaled to card memory)... the only draw back was that it would not stick to the voices folder in the sd since I had to select a voice every time tomtom was turned on (tomtom would see the voices on the sd but would not memorize the one I chose on the next startup).... this I fixed by downloading a voice straight from within tomtom.
br
Literally got this working myself today!
The fix on the tomtom website says to copy the zip folder containing the post code file to main memory and it will work - well I created a folder called 'zip' on my sdcard and copied the postal code file to that, then also created an empty folder on my sdcard called 'TomTom' - it worked perfectly then!
Stange my legit copies all work and guess what so does my duff copy never had to do anything just install and away.
The official reply from TomTom support is the XDA Exec is NOT compatible although they are working on it. Did everything to try to get 7 digit postcodes to work, but to no avail. Everything else within TomTom is working fine so it's not critical. Now, how do you make your own voice files??!!
Geoff
Geoff, Exactly where are you trying to enter the postcode? - this might seem a stupid question, but if you are putting the postcode into the Navigate to address screen you won't get 7 digit, you need to tap the rh arrow go to the next page and select enter postcode, then if the empty tomtom folder and the zip folder (containing the GB post code file) are all in place it should work. For some voices etc. have a look at www.tomtomsatnav.info there is useful stuff utilities/ voices/ warnings etc. - Mike
Working fine on my Exec. You need the postcode data in a folder called 'zip' in the root of the storage card and another empty folder entitled 'TomTom' in the storage card root.

TomTom Questions - a couple that I think I can solve, or not

Questions for those with TomTom successfully on a Wizard....
1. How? The CDs won't load! The application CD blows up immediately when you run the setup application - it never even attempts to talk to ActiveSync. Can't load the code this way!
2. The first Map CD fails also with an "premature end of JPEG file" error message (WTF?!) If I use the SECOND Map CD, I can load maps. Kinda. They will load to my PC (tell it I have a "Go", then when it errors out tell it to load to a directory) which I think I can then copy over. Maybe.....
3. Having seen someone else's setup, I'm wondering something - can you plan a route that spans more than one map? It didn't look like it! That sucks SEVERELY for long trips.....
Thanks in advance....
Can't help on 1 & 2, but I have heard of people getting bad CD's and getting them replaced by TomTOm fixes their issues. I've been fortunate to get everything working perfectly the first time.
To answer #3, yes you can plan a route that spans several states. You need to either load one of the regional maps or the 'Major Roads and Highways' map.
Can't help on 1 & 2, but I have heard of people getting bad CD's and getting them replaced by TomTOm fixes their issues. I've been fortunate to get everything working perfectly the first time.
To answer #3, yes you can plan a route that spans several states. You need to either load one of the regional maps or the 'Major Roads and Highways' map.
I've opened a ticket with them - I've heard their support is legendarily BAD (as in no replies at all in some cases), so we'll see. If I have two bad CDs, then if they replace them all's well.
But right now what I have is a worthless piece of software that cost me $150 - and I am NOT happy about that..... I guess the only good point is that I can't even activate it, so if its a Wizard incompatability probelm I can stick it on eBAY and the code is still good....
Here's the part of the solution....
Wizard = WM5.
You can't use the default loader on the CDs to install the program to a WM5 device.
Solution. Go to TomTom's website. Go to support and download the latest patch (version 5.21). Here's a link that sure work:
http://www.tomtom.com/support/solution.php?GID=3&PID=188&SID=198&CID=0&Language=1&FID=3361
Run the program on your PC (not your wizard) and install on your wizard once you've established an ActiveSync Connection.
Now. You'll need to get a voice file off the CD. Put in the first disk (i.e Disk number 1) and look for a directory called voice (I think). An easier way may be to search the CD for a file named USAM.cab. This is the voice for "Richard". You can experiment with different voices later. Copy this file to your PPC (i.e. right-click on the file, click "copy", then right-click on the activesync icon (while connected)-> click "explore". Find the directory you want to paste it to (it doesn't really matter) and right click and click "paste".) Now the file is on your PPC.
From your PPC File Explorer (not windows), click on the USAM.cab to install the file. We're almost finished.
Now simply install the map that you want.
No you can't navigate between regions; however, if you select the "Other Map" you see a couple of national maps.
had the same problem like Genesis3 first.
In my case it was insufficient memory on my SD card.
After inserting a 1GB card everything went ok.
Seems like TT5 checks available memory and quits without any error message if memory is'nt enough.
In my experience TT5 would not instal over activesync on WM5, but can be installed manually, and will run perfectly OK except for not being able to find a BT GPS receiver (not sure about wired GPS as I haven't tried it).
See the details I posted about 10 from the top in this post
http://forum.xda-developers.com/viewtopic.php?t=43412&highlight=
To use the BT receiver you will need the TT V5.21 upgrade.
I have a 1G SD card in my Wizard; its half-full with "stuff", but 512MB sure ought to be plenty I'd think!
You can't just run the update from their website, it is a patch, not the full install.
"This update can ONLY be used when you have already installed a registered version of TomTom NAVIGATOR 5 on your Pocket PC/Palm OS device."
As far as support - call, don't mess with submitting a ticket. They are actually really good.
I beg to differ....
ryanc2,
You previous post is simply incorrect. I've download the patch, installed it on my JasJar and had no problems. You HAVE to install the voice from the original TT CDs or else you'll never get past the "Start -Up Wizard" in TT.
You will need to enter your activation code (you get from www.ttcode.com) during the start up process.
Also, I've installed v.5.21 and have used my BT receiver with no problems. My guess is that the people who are having problems with this do not have their BT GPS configured properly or they're running a cracked version (don't read into anything. I'm not accusing anyone! I'm just telling what I've found).
BTW, I've found installing TT maps via an external card reader (i.e. pop the card out of your wizard and plug it directly into your computer via card read) is the fastest and easier way to copy maps.
Re: I beg to differ....
weatheryoko said:
ryanc2,
You previous post is simply incorrect. I've download the patch, installed it on my JasJar and had no problems. You HAVE to install the voice from the original TT CDs or else you'll never get past the "Start -Up Wizard" in TT.
You will need to enter your activation code (you get from www.ttcode.com) during the start up process.
Also, I've installed v.5.21 and have used my BT receiver with no problems. My guess is that the people who are having problems with this do not have their BT GPS configured properly or they're running a cracked version (don't read into anything. I'm not accusing anyone! I'm just telling what I've found).
BTW, I've found installing TT maps via an external card reader (i.e. pop the card out of your wizard and plug it directly into your computer via card read) is the fastest and easier way to copy maps.
Click to expand...
Click to collapse
Just simply stating what is posted on their website - I wouldn't know as I upgraded from a previous install of 5. Thanks for clarifying.

TomTom v5.00 with US Maps and Bluetooth working.....

After reading may threads on here about people not being able to get TomTom working with US maps once they have upgraded to v5.21 I thought I would look in to a way around the troubles.
Here is what I think peoples problems are:
1. Bluetooth GPS could not be paired under TomTom v5.00
2. Cracked versions of maps or even maybe real v5 maps of the US don’t work under v5.21
People want US maps AND Bluetooth GPS i.e. numbers 1 AND 2, but can't find a way to have their cake and eat it.
After many installs and trials of TomTom v5 and v5.21, I think I have just hit upon a solution. The basis of the problem is that TomTom v5 does not let you use a COM port that your Wizard lets you set, so how do you fix this.....
- I installed TomTom v5 as per the many sets of instructions on the forums, ie copy CAB files to your SD card and install.
- Next pair your BT GPS to COM port 8.
- Run TomTom and set up as normal, when you get to the GPS setup, select COM port 2
- Close TomTom
- Copy navigator.cfg (installed in /Program Files/Navigator) to your PC
- Using a hex editor edit navigator.cfg
- Change ONLY the entry for the number after the work COM to 8 (or what you set the COM port to above)
- Copy the file back to the original location
- start TomTom
You should see that the BT GPS is now recognised; also you should see that you can select all the maps that you have installed.
I have not tested that the BT GPS works in the UK and the US ‘cos I can’t be in 2 places at once, but I hope that some of the US users can verify this before I move out mext month.
Let’s hope this is the final answer I have been looking for
Wow. That's great, thanks for that.
i've just spent the last week with the Bluetooth problem, only to realise about an hour ago that I had the answer all along and I was just too stupid to realise.
In case anyone out there has been battering their head on their laptop in frustration (and is similarly mentally challenged as myself), I have a hint for those using the not entirely legal version of TT.
If you have the one marked 5.21 or have one which has 5.00 and 5.21 exe files in the zip somewhere, you need to copy across the cabs (as described on many forums - I have messed about so much I can't describe a full process to get to where I am now but I'll try to summarise below)
Once the cabs are copied, version 5.00 will work OK but will have the BT COM port problem.
Then stick the 5.21 cracked exe into the Program Files\Navigator folder ( i did not delete the old one, just renamed it incase it went wrong) and then when you run the new one it runs as before but with the COM port options.
My mistake was when I first got the files, I tried running the exe on my PC and in the phone. It doesn't work until you have the cracked 5.00 app already working and only then if you stick it into the Navigator folder.
Sorry if this is just stupid but I have browsed god knows how many forums over the past 2 weeks and so many people seem to be having similar problems (some with genuine tomtom and some not saying but hey, if they had paid for it in the first place the upgrade would be easy, right??).
I'll try to summarise the steps I took to get mine working (these are my best guess of the basics to get it working, skipping the hundred other things i have tried which failed to help.
1. installed cabs (WZD, GPS, PINAddIn & my desired Voice) from pocketpc and voice folder BUT had problem with ttn cab as just gave 'unsuccessful' message
2. Copied maps into storage card in their respective folders (NB apparently need to have at least 2 maps to get it to recognise them, if you only have one just copy the folder and rename one of them)
3. Downloaded WinCE Cab Manager (freeware for first 15 uses) from OCP
4. Opened ttn.cab in WinCE Cab Manager and extracted exe and data.chk file and put into Navigator folder in Program Files
at this point the 5.00 version should load, set up maps and voice and works fine apart from GPS
5. Rename (or delete) the TomTom Navigator.exe and replace it with the 5.21 one from the cracked folder.
all the GPS stuff should be easy from there as COM port 6 should show up (and is covered elsewhere anyway)
I think that's the essential points. There is a lot of superflouous stuff that comes with TomTom that you don't need to get the main function working so that's why there is a minimum of installs.
If there's anything I missed, please correct me.
Anyway, I am now only 1 step away from being able to us the darn thing after 2 weeks of trying.
The main reason I got it was to navigate in Germany when I go on holiday in June as I have a few serious days of driving and want to be able to navigate easily.
I have been able to get my Germany and Great Britain maps working fine but as I live in Australia, I want to get used to using TomTom now with my Australia maps...BUT THEY WILL NOT LOAD!!!
They show up on the screen when I pick my maps but the screen just freezes when i select Australia.
Any ideas???
Heres a navigator.cfg already set to use com port 7.
Anyone with v5 can set their outgoing port on the BT device to port 7 and replace their .cfg file with this one and it should work - I just tried it.
Bilbo...you are my new hero.
I'm really glad to know that my $100 and 4 hours of hacking around with this thing weren't all in vain. Thank you SO much.
<3 <3 <3 8)
hi pewe,
thanks for the post. have got the same com port problems and breaking my head over it trying to get a rikaline gps work. could please please post a detailed answer on what to do with the file u have posted. i copied the file over the one i had in the pda but now have lost com port 4 and no 7 has appeared. please help
cheers, many many thanks.
pewe said:
Heres a navigator.cfg already set to use com port 7.
Anyone with v5 can set their outgoing port on the BT device to port 7 and replace their .cfg file with this one and it should work - I just tried it.
Click to expand...
Click to collapse
hi weevel,
looked at your post. have the same problem. would have a copy of the cracked 5.21 exe. cant seem to find one and unable to work my tomtom. have got the cracked 5.0 working properly but no gps. pleeeeeeease help.
cheers.
weevel said:
Wow. That's great, thanks for that.
i've just spent the last week with the Bluetooth problem, only to realise about an hour ago that I had the answer all along and I was just too stupid to realise.
In case anyone out there has been battering their head on their laptop in frustration (and is similarly mentally challenged as myself), I have a hint for those using the not entirely legal version of TT.
If you have the one marked 5.21 or have one which has 5.00 and 5.21 exe files in the zip somewhere, you need to copy across the cabs (as described on many forums - I have messed about so much I can't describe a full process to get to where I am now but I'll try to summarise below)
Once the cabs are copied, version 5.00 will work OK but will have the BT COM port problem.
Then stick the 5.21 cracked exe into the Program Files\Navigator folder ( i did not delete the old one, just renamed it incase it went wrong) and then when you run the new one it runs as before but with the COM port options.
My mistake was when I first got the files, I tried running the exe on my PC and in the phone. It doesn't work until you have the cracked 5.00 app already working and only then if you stick it into the Navigator folder.
Sorry if this is just stupid but I have browsed god knows how many forums over the past 2 weeks and so many people seem to be having similar problems (some with genuine tomtom and some not saying but hey, if they had paid for it in the first place the upgrade would be easy, right??).
I'll try to summarise the steps I took to get mine working (these are my best guess of the basics to get it working, skipping the hundred other things i have tried which failed to help.
1. installed cabs (WZD, GPS, PINAddIn & my desired Voice) from pocketpc and voice folder BUT had problem with ttn cab as just gave 'unsuccessful' message
2. Copied maps into storage card in their respective folders (NB apparently need to have at least 2 maps to get it to recognise them, if you only have one just copy the folder and rename one of them)
3. Downloaded WinCE Cab Manager (freeware for first 15 uses) from OCP
4. Opened ttn.cab in WinCE Cab Manager and extracted exe and data.chk file and put into Navigator folder in Program Files
at this point the 5.00 version should load, set up maps and voice and works fine apart from GPS
5. Rename (or delete) the TomTom Navigator.exe and replace it with the 5.21 one from the cracked folder.
all the GPS stuff should be easy from there as COM port 6 should show up (and is covered elsewhere anyway)
I think that's the essential points. There is a lot of superflouous stuff that comes with TomTom that you don't need to get the main function working so that's why there is a minimum of installs.
If there's anything I missed, please correct me.
Anyway, I am now only 1 step away from being able to us the darn thing after 2 weeks of trying.
The main reason I got it was to navigate in Germany when I go on holiday in June as I have a few serious days of driving and want to be able to navigate easily.
I have been able to get my Germany and Great Britain maps working fine but as I live in Australia, I want to get used to using TomTom now with my Australia maps...BUT THEY WILL NOT LOAD!!!
They show up on the screen when I pick my maps but the screen just freezes when i select Australia.
Any ideas???
Click to expand...
Click to collapse
but no gps
Click to expand...
Click to collapse
Have you tried V5 with the navigator.cfg fix discussed here
http://forum.xda-developers.com/viewtopic.php?t=46828&postdays=0&postorder=asc&start=0
hi pewe,
is it the reg editing u are reffering to in that forum. please let me know.
cheers
pewe said:
but no gps
Click to expand...
Click to collapse
Have you tried V5 with the navigator.cfg fix discussed here
http://forum.xda-developers.com/viewtopic.php?t=46828&postdays=0&postorder=asc&start=0
Click to expand...
Click to collapse
You can try that - but the easiest solution to try first is the one where you set the GPS in TT to any port, setup the BT device config to outgoing port 7 then replace the navigator.cfg. That seems to work for most people.
hi pewe,
another small issue. us maps dont work with 5.21 upgrade. is it a question of downgrading to v5 before a trip and borrowing a friends tomtom reciever to work there and come back change again or is there anither way.
cheers
I have tried that with my Cinular 8125 (WM5), in TOMTOM set the gps to com 2 then switch the cfg file adn it still doesnt work, i have MS streets and maps working fine, so i know the GPS is good.
I have a new idea lets work with 5.21 and see see what version map it reads then edit our usa maps and change the version. Has anyone tried this, ive been looking all over for a TOMTOM map editior, but no luck. I have all the USA maps so if you need one let me know
pewe said:
Heres a navigator.cfg already set to use com port 7.
Anyone with v5 can set their outgoing port on the BT device to port 7 and replace their .cfg file with this one and it should work - I just tried it.
Click to expand...
Click to collapse
Hi,
Have tried replacing my cfig file with the one you supplied but this hasnt worked...my version of tomtom however appears to be 5.1
Do I need a different Cfig file for this version ?
Many thanks
Steve
Do I need a different Cfig file for this version
Click to expand...
Click to collapse
Not sure - I've never used V5.1.
What com ports does TomTom offer you when you try to configure the BT device?
pewe said:
Do I need a different Cfig file for this version
Click to expand...
Click to collapse
Not sure - I've never used V5.1.
What com ports does TomTom offer you when you try to configure the BT device?
Click to expand...
Click to collapse
Config within Tomtom offers -
COM9:
Infrared Port
COM3:
COM0:
COM2:
Serial Port
These are the 'normal' options - so I can't understand why it doesnt work.
Are you sure that the BT is setup on your device as com port 7?
If it is and it doesn't work, try setting it to com port 6 and try this config file.
pewe said:
These are the 'normal' options - so I can't understand why it doesnt work.
Are you sure that the BT is setup on your device as com port 7?
If it is and it doesn't work, try setting it to com port 6 and try this config file.
Click to expand...
Click to collapse
Certain my BT device was set to Com port 7, still tried this alternative Cfg. file and changed port to 6 with the same result in that options within tomtom remain unchanged as stated before (assume the expected result should be to provide additional Com ports within tomtom Configure screen to enable selection of Com port 6 ?)
Not sure then.
Maybe V5.1 has some differences about it.
pewe said:
Not sure then.
Maybe V5.1 has some differences about it.
Click to expand...
Click to collapse
Cheers anyway...
Other forums suggest that installing the V5.2 update from tomtom will fix the comm port bug....not sure however if this will wreck all the files I have so painstakingly installed. Any ideas if running the tomtom update is safe ?
Not sure - it depends what you have installed. Some have reported problems with Maps from V5/V5.1, but mainly in the US. Mine went from V5 to V5.2 without a problem.
If you backup everything before you upgrade you can always re-install..
How to get TOMTOM Working with UK and USA Maps
I have TOMTOM 5.21 on IPAQ in the UK and wanted to load the Michigan Map for a business trip that I have next month.
Having downloaded the USA Maps I spent all day trying to get TOMTOM to recognise the USA Map with no luck.
Read all the forums and tried one or two tips but to no avail. Then I tried something quite simple.
1. Install all the way to 5.21 in order to get Bluetooth GPS working. Once done this makes the correct .CFG file.
2. Simple back up the 5.21 executable or rename.
3. Copy the cracked 5.0 executable into the navigator directory. Voila ! It retains the Bluetooth settings AND it allows me to load the USA maps.
Wont be able to properly confirm the USA maps work 100% till next month but UK map work just fine and when I load the michigan map it lets me browse but cannot plan a trip cos GPS says I am out of the scope of the map.
So looking good.

Installing TOMTOM6 on microSD card ?? Fix Today Launch Item ???

Since I don't have a lot of space in the internal memory from the phone, I am trying to install the TT6 on the storagecard.
But he always put it into the phone memory, now I can Move it onto the mSD card manually with the PC, but now the link in the TODAY screen doesn't work anymore, how can I fix that ??
TT6 works just fine if I launch it from FileExplorer ..
Go4it2win said:
Since I don't have a lot of space in the internal memory from the phone, I am trying to install the TT6 on the storagecard.
But he always put it into the phone memory, now I can Move it onto the mSD card manually with the PC, but now the link in the TODAY screen doesn't work anymore, how can I fix that ??
TT6 works just fine if I launch it from FileExplorer ..
Click to expand...
Click to collapse
(Edit: I just re-read your post. The procedure below will fix the shortcut in the Programs screen. If you were talking about the TomTom Today plug-in, it won't help. I am not sure which of the two you were referring to.)
There is a cute trick to solve this problem:
- connect your device to your PC
- on the PC, open ActiveSync's "Browse" (note: I use a German Windows, so my translation of menu items may be incorrect. In that case, try whatever sounds similar )
- browse to the TomTom directory on your SD card.
- right-click on the TomTome executable, select "copy"
- browse to the \Windows\Start Menu\Programs directory
- delete the old, dysfunctional shortcut to TomTom
- right-click anywhere in that directory, and select "paste as shortcut".
Amazingly, ActiveSync has now created a proper Windows Mobile style .lnk file for you. Press F2 to rename it to whatever you want. Note that you do not need to specify the .lnk extension.
Hope that solves your problem!
Cheers
Daniel
I didn't want to start an entire new thread on this and I searched but couldn't find the exact answer:
I'm waiting for my 8525 next week that I ordered from Cingular and want to use my new TT Navigator 6 software on my 8125 in the meantime. Will I be able to use the TomTom product code a second time when i receive my 8525 after I've already activated it on my 8125? So really not trying to do anything illegal, just want to use it for my personal use on my current phone while I wait for my new one.
Will the product code only work once? Has anyone loaded the software on a device, only to get a new device and then activate with no issues the second time on a new device?
Thanks. THIS FORUM ROCKS. My 8125 is a great device from all the tweaks I picked up here at XDA (especially OMAPCLOCK) and I've bookmarked at least 15 Hermes tweaks for my soon-to-arrive 8525.
Michael
mbn said:
I didn't want to start an entire new thread on this and I searched but couldn't find the exact answer:
I'm waiting for my 8525 next week that I ordered from Cingular and want to use my new TT Navigator 6 software on my 8125 in the meantime. Will I be able to use the TomTom product code a second time when i receive my 8525 after I've already activated it on my 8125? So really not trying to do anything illegal, just want to use it for my personal use on my current phone while I wait for my new one.
Will the product code only work once? Has anyone loaded the software on a device, only to get a new device and then activate with no issues the second time on a new device?
Thanks. THIS FORUM ROCKS. My 8125 is a great device from all the tweaks I picked up here at XDA (especially OMAPCLOCK) and I've bookmarked at least 15 Hermes tweaks for my soon-to-arrive 8525.
Michael
Click to expand...
Click to collapse
That'll be one to ask tomtom tech.

Categories

Resources