I do work now and than for a few WISP and the radios (Motorola Canopy Units) are programed with and Ethernet cable connected to a computer and the Canopy units and you use the web browser to set the IP's and do all the tweaking on the Canopy Units. My question is if I bought an adapter like this...
http://cgi.ebay.com/Mini-LAN-Adapte...hash=item270292780360&_trksid=p3286.m63.l1177
Could or will my Kaiser let me use the web browser in it using the mini USB and browser in the phone instead of carrying a notebook computer up a tower to tweak the Canopy Units and logging into the IP's I need on them.
I'd say no. The kaiser cannot use its mini usb in host mode. Basically the Kaiser cannot control other devices via usb, it can only be controlled.
Thanks for your reply, I guess I'll just keep on doing things the way I have to, I was hoping to not have to pack the notebook anymore.
There are adapters to add host function http://www.ratocsystems.com/english/products/CFU2U.html but they are very expensive and this particular device, I'm not sure will work with your Kaiser or Tilt.
There are other phones which you can use to control the devices, I believe the IPod is on such device, but you may want something with a little more power like the HTC Shift http://www.htcwiki.com/page/Smartphone+Guides or the newer Advantage.
The point being there are alternatives for you
Another article for your pleasure http://www.analogzone.com/iop_0109.htm
Related
I know that connection to the internet can be achieved via USB&ActiveSync or Wifi. But can the device be connect to the internet via normal Ethernet plug on my (non-wireless) router. Which adapters are required to do so? At home I do not have a wireless router so I am wondering if this is possible…
And, can auto charger for my Hermes (TyTN) be also used for Athena??
Thanks again
Uros
Buy a cheap wireless access point (with no router) and connect it to the port on your wired only router.
the phone may also connect to the internet via bluetooth
and yes i believe the charger from your hermes should work
Usb voltages are the same pretty much
Thanks. Would this device called "Macally 5-in-1 USB Combo Kit" allow this?
see -> http://www.mobileplanet.com/p.aspx?i=115169
Which Bluetooth device do you recommend?
Uros
cerk2006 said:
Thanks. Would this device called "Macally 5-in-1 USB Combo Kit" allow this?
see -> http://www.mobileplanet.com/p.aspx?i=115169
Click to expand...
Click to collapse
No. That's just a bunch of connectors. It won't help your situation.
I still think Pyrofer's sollution is the best one (second post).
any bluetooth dongle should work
but ideally speaking if u can afford it go for the wireless access point it will cost a little more than a bluetooth but its well worth the extra 10-15 bucks
Guys, many thanks for your opinion. Any yes, am I aware the wireless solution is the best way to go.
Nonetheless I would like to stay "wired" for some time more. Reason is that I have two small kinds and we are leaving in a small apartment. I would like to prevent exposing them to any unnecessary "wireless" technologies as long as possible, at least now when they are growing up.
So, once again I am asking you: is there an adapter between Ethernet plug (RJ-45) and (mini) USB on the Athena and will eventually connection to the internet work?
There is NO wired adaptor for the Athena. The closest you can get is a USB lead and activesync, then use the PCs internet connection.
USB to Ethernet Adapter ???
Thanks all for your feedback!
What about this device: USB 2.0 to RJ-45 Ethernet Adapter
(http://www.pacificgeek.com/product.asp?ID=42665&C=212&S=-1) in combinatin with 4 in 1 cable?? Could this work??
(Or http://www.geeks.com/details.asp?invtid=HE-130R&cat=NET)
Does it come with A PocketPC driver? If not, no use.
If it doesnt say it comes with PPC drivers, i doubt it does.
You are right, Pyrofer, it doesn't support the PPCs
But maybe this one does: http://www.clarinetsys.com/en/product-ea104.htm,
I just need to check the price...
cerk2006 said:
You are right, Pyrofer, it doesn't support the PPCs
But maybe this one does: http://www.clarinetsys.com/en/product-ea104.htm,
I just need to check the price...
Click to expand...
Click to collapse
On the web site, it says:
Supports PPC 2002/2003/2003SE, CE5/4.2/4.1 and Windows® Mobile 5.0 (coming soon)
I am not sure it means the driver for WM5 is coming soon.
cerk2006 said:
Nonetheless I would like to stay "wired" for some time more. Reason is that I have two small kinds and we are leaving in a small apartment. I would like to prevent exposing them to any unnecessary "wireless" technologies as long as possible, at least now when they are growing up.
Click to expand...
Click to collapse
Ummm, you want to protect them from wireless radio waves? I take it you leave the phone in flight mode when in their presence, don't use Microwave ovens in your house, haven't got cordless phones e.t.c.? Sorry, don't want to bash your views, but there IS an awful lot of paranoia put out by the media and many people who jump on the bandwagon before establishing the facts.
As for sharing the internet, I know you can do it from PC->Ameo V easily with the included 'internet sharing' applet. I do it via BT, but USB works equally well.
On WM5 has anyone been able to access USB devices like printer, Pendrive etc directly? Would be great to be able to print directly or access files from a USB memory stick.
Have heard of HP printer drivers for older versions of windows CE somewhere...
Using a usb device on the phone.
I know of no WM5 or WM6 phone for that matter that have a usb STACK on them that would allow them to use a usb device. They are designed to BE a usb device for a pc...not the other way around.
famewolf said:
I know of no WM5 or WM6 phone for that matter that have a usb STACK on them that would allow them to use a usb device. They are designed to BE a usb device for a pc...not the other way around.
Click to expand...
Click to collapse
i think you are mistaken.. there are a couple new WM5 and/or 6 devices that have USB hosting support.. among them is the Athena, O2 Flame, and toshiba g900, and those WM devices exclusive from/for japan..
Yeah, it is the other device that must be able to read the PPC.
My stereo read my Tytn as a storage device. Can play music directly from the PPC. However it is the Stereo doing the recognizing job. Not the other way around.
I'd just like to clarify a few things:
1) USB has two sides - host and client and they are different by hardware and not just software so there is no "able" question here.
2) In cases like memory stick, printer etc. when your device uses what is connected to it, the phone must act as host. The reason there are few devices with USB host is mainly because to be fully implemented this standard must provide up to 500 mA current to the hosted device and of course thats a bug problem when working on battery.
(Any phone that does implement it, provides it "unpowered" so not all devices will work)
3) In cases where something is using your device like the stereo, the phone acts as a client so with the right piece of software (like WM5Storage) any phone can be used.
The fujitsu Pocket LOOX T810/830 can act as a USB hub.
Some devices have this capability but not a feature that is common.
Sam.
I'm really unqualified to discuss this in great detail, but why I got there was - I've read somewhere in these forums about Win95 emulators for ppc devices. Now if it could be possible to "emulate" just the USB stack portion of Win95, maybe, the ppc could be connected to devices like printers which would not require a powered USB connection.
That's all ...
Atul
emulating an os dont add new features to the hardware though
Connecting Keyboard Like Devices via USB or Bluetooth To Mogul
I have searched through the posts here and in other forums and have not found a precise or complete answer to these questions. Any help would be appreciated. I'm not an expert. I did read one post about using the Mogul as a control device ( keyboard ) however a very useful application is to use the Mogul as a data collection device in the field, especially when end users may have devices all ready connecting to laptops/desktops via the USB and seen as ASCII output ( like a 101 keyboard ).
Does the Mogul have USB host capability through the connector? There seems to be conflicting opinions. If it does what is needed to turn on the capability?
This is the scenario I am trying create without having to rebuild or build new devices. A cost effective solution is the goal.
Assume the data collection devices I want to connect to the Mogul have a standard USB connector and wiring the same as a USB 101 type keyboard ( though the devices are not keyboards ) and the signals coming out of the connector are the same. The data stream is ASCII character stream. The USB devices are self powered so they do not need to draw the 5 volts from the Mogul.
The goal is to connect such a device to the Mogul directly via the USB connector so that it looks like a keyboard OR connect the device to an external Bluetooth transmitter that looks like a Bluetooth keyboard.
Off the self product would be preferable to having to black box the project.
It would seem simple considering there are USB Bluetooth transmitters at fairly low cost, but I have not been able to find one for this specific application. Hacking and existing Bluetooth keyboard might work but it would be a bulky solution, a considerable downside as well as expense for each of the devices.
I'm not a corporate Mogul, just a single employee end user who has specific data collection needs.
Thanks in advance
It was suggested in the Titan forum on another subject that this type of discussion would be more appropriate and fruitful in the developer area.
I have just enough knowledge and experience to be dangerous with a soldering iron and electronic parts.
Connecting Keyboard Like Devices via USB or Bluetooth To Mogul
I have searched through the posts here and in other forums and have not found a precise or complete answer to these questions. Any help would be appreciated. I'm not an expert. I did read one post about using the Mogul as a control device ( keyboard ) however a very useful application is to use the Mogul as a data collection device in the field, especially when end users may have devices all ready connecting to laptops/desktops via the USB and seen as ASCII output ( like a 101 keyboard ).
Does the Mogul have USB host capability through the connector? There seems to be conflicting opinions. If it does what is needed to turn on the capability?
This is the scenario I am trying create without having to rebuild or build new devices. A cost effective solution is the goal.
Assume the data collection devices I want to connect to the Mogul have a standard USB connector and wiring the same as a USB 101 type keyboard ( though the devices are not keyboards ) and the signals coming out of the connector are the same. The data stream is ASCII character stream. The USB devices are self powered so they do not need to draw the 5 volts from the Mogul.
The goal is to connect such a device to the Mogul directly via the USB connector so that it looks like a keyboard OR connect the device to an external Bluetooth transmitter that looks like a Bluetooth keyboard.
Off the self product would be preferable to having to black box the project.
It would seem simple considering there are USB Bluetooth transmitters at fairly low cost, but I have not been able to find one for this specific application. Hacking and existing Bluetooth keyboard might work but it would be a bulky solution, a considerable downside as well as expense for each of the devices.
I'm not a corporate Mogul, just a single employee company / end user who has specific data collection needs.
Thanks in advance
I've an HTC Desire HD and can connect via wifi, I could connect via cable and tether a PC via the phones 3G signal etc However, I was wondering if, in the absence of USB connectivity and no wifi or 3G, would a USB to RJ45 cable be made to work? That is, having a wired ethernet connection to the phone's microUSB port. Obviously you would need an ethernet driver on the phone.
Now I don't have an immediate need for this, it's more a case of 'I wonder ...... '. I've read that USB host mode is not possible but not sure how/if that would negate being able to driver ethernet over the microUSB port. Anyone know for sure?
Ta
Dave
dvhttn said:
I've an HTC Desire HD and can connect via wifi, I could connect via cable and tether a PC via the phones 3G signal etc However, I was wondering if, in the absence of USB connectivity and no wifi or 3G, would a USB to RJ45 cable be made to work? That is, having a wired ethernet connection to the phone's microUSB port. Obviously you would need an ethernet driver on the phone.
Now I don't have an immediate need for this, it's more a case of 'I wonder ...... '. I've read that USB host mode is not possible but not sure how/if that would negate being able to driver ethernet over the microUSB port. Anyone know for sure?
Ta
Dave
Click to expand...
Click to collapse
I think the answer is not without usb host, and the cable would need to be more like a dongle with a nic in it.
Sent from my DROID2 using XDA App
mrkite38 said:
I think the answer is not without usb host, and the cable would need to be more like a dongle with a nic in it. ...
Click to expand...
Click to collapse
You're right of course. Doh ..... (on my part). But then you can get things such as this ... http://www.saverstore.com/product/2...NIC-1427-100--USB-to-RJ45-Network-connection- ... (first one I found - may be cr*p ).
Dave
I have seen this work using a Router with a usb port.
It requires a Linux router with enough guts to do it, Tommato/DD-WRT running, and one must fiddle with it. Essentially one uses the router to share the internet USB connection. It is probably the cheapest and most supported route.
LargePrime said:
I have seen this work using a Router with a usb port.
It requires a Linux router with enough guts to do it, Tommato/DD-WRT running, and one must fiddle with it. Essentially one uses the router to share the internet USB connection. It is probably the cheapest and most supported route.
Click to expand...
Click to collapse
That would be lovely though .. Ill try it later ...
Let us know how it goes.
Back in the day I had an HP iPaq that didn't have WiFi built in, but I could connect it to a wired network via a small adapter that functioned as a nic. Hypothetically you could find or fashion such a device to function over mini-USB, and then write some drivers to get it to share data with an attached computer. Just my 2c.
If you want to write drivers, you have a whole new level of complexity.
USB port of a router is a known cheap solution.
I'd have to second the OP's idea, as it does have merit. Hopefully the work on getting the USB Host working can show some results in the future....
However, I'm in the same boat, where I have a Nook Color running CM7 I use as a tablet, and an N1. I'm also on business in China a lot, and I prefer to use the NC in place of a laptop, although in some places wireless is flakey or non-existent. In those scenarios I'd rather not use the N1 as an access point using the 3G network to run data, as it adds up quick, even when using China sim cards.
It's these situations where a means to connect an android device to a physical ethernet is desirable, whether by USB or by wireless to a dongle.
This is the one device I'm testing out now is a CQR-980 from Cnet. You'll have to google it, because I can't post links.
The reason for this unit is it's size (its 3.52 (L) x 2.32 (W) x 1.06 (H) inches), and full support for setting up a secure wireless environment. If it works right, I will pre-configure it as an access point with WPA2, and it should be able to be plugged into any ethernet port in a hotel or otherwise, and I should get an IP on the NC or N1 via wireless.
If anyone else has found a better way to make this sort of setup work, would love to hear of it. The fewer devices I have to bring the better. Yet this is still better than dragging even a small laptop around.
I have seen this work using a Router with a usb port.
The Phone got to have specialized hardware to enable it to use just that USB to RJ-45 cable.
But in my experience, I could be wrong about it. Don't know what the R & D guys will cook up next.
This could make the job of having RJ45 connected to USB?
http://www.cnetusa.com/eng/CQR-981.php
Also this seems interesting:
http://www.euogo.com/usb-lan-adapte...to-rj45-adapter-for-android-tablets_p420.html
Will it work with an ASUS Transformer (Honeycomb 3.0)?
I have looked around a lot on the web for the MicroUSB to RJ45 Ethernet on a Droid, no luck. I have small hardware devices that have embedded configuration servers that are only accessible via TCP/IP Ethernet RJ45 ports and I normally use my netbook for that. I thought it would sure be cool to be able to access those embedded servers via my Droid2G for example, and get rid of the netbook. It seems like the phone can do almost everything else.
I've read about USB host mode etc, and the mini dongles with NIC's in them seem more promising, but I guess there has not been a big enough need for the guru's to go after it. Aparently it may available on the Android 3.x tablets but no able to backport to Android 2.x? Verizon will likely never upgrade my D2G OS.
dvhttn said:
You're right of course. Doh ..... (on my part). But then you can get things such as this ... http://www.saverstore.com/product/2...NIC-1427-100--USB-to-RJ45-Network-connection- ... (first one I found - may be cr*p ).
Dave
Click to expand...
Click to collapse
What if you used this but also used a usb extender so you could plug in the phone cable to the usb to rj45.? Then all that would be left would be the drivers.
With the exception of cybdroid's situation I think that a little wireless ap would work great. I have a little netgear wgr101 that works great.. you connect it to a rj45 port in the motel, and then wifi from the phone or laptop.
The reason i'm on this tipic, is I was thinking rj45 to rj45 on a copier. Then I can set same subnet, and ip range with a crossover cable(or ipx on on the copier). Then I wouldn't have to use a full laptop to troubleshoot...
now i'm not an apple fan but redpark has something for the i- series of apple products to do exactly what i'm curious about... you can check it on the tech journal.
Now that I spend some time reading and thinking, I might even be able to use my little wgr101 if i figure out a hosts file in the android os to direct traffic through the router. And, if I don't have to wear out the usb jack on the device, all the better.
I think I have my problem fixed, just went ahead a posted this as it might give someone else an idea. Might be a solution that even the op enjoys entertaining... I think op#2 and frayedends are on the right track.