Related
I search Bluetooth Software for Sending files any suggestion ?
Thanks in advance ..
resco explorer
resco explorer doesnt provide the possibility to send files via bluetooth on the jam.
perhaps the f...ing bt stack is responsible for that ;-)
FluBeX
flubex said:
resco explorer doesnt provide the possibility to send files via bluetooth on the jam.
perhaps the f...ing bt stack is responsible for that ;-)
FluBeX
Click to expand...
Click to collapse
that's not true, when you press beam file with resco, it automatically searches for ir or bt devices. It works really good with my jam.
Yeap...Resco really good with my jam... :wink:
pntzamaras said:
flubex said:
resco explorer doesnt provide the possibility to send files via bluetooth on the jam.
perhaps the f...ing bt stack is responsible for that ;-)
FluBeX
Click to expand...
Click to collapse
that's not true, when you press beam file with resco, it automatically searches for ir or bt devices. It works really good with my jam.
Click to expand...
Click to collapse
You can do the same ting using the bulit in explorer too... no need to buy resco to send files via BT
Use the Built in File Explorer. It is just as good.
how do you guys do this? nowhere in the file explorer does it let me beam files via bluetooth. the only option available is via stodgy infrared.
J10DA said:
Yeap...Resco really good with my jam... :wink:
Click to expand...
Click to collapse
I have resco explorer (in French) and I don't see Beam File
When I press and hold on a file, the popup menu ask me "send to" then I have 2 choices "Email" and "infrared"
I'm I missing something ??
cseilern said:
how do you guys do this? nowhere in the file explorer does it let me beam files via bluetooth. the only option available is via stodgy infrared.
Click to expand...
Click to collapse
yes, they're.. first turn on your bluetooth... then hold on the file for few sec on file explorer.... select Beam File... It would now searching for bt device surrounding u.....
Yeeee Haaaah! it works thanks! (next time I'll switch bluetooth on before sending files via bluetooth.... duh!)
Send via bluetooth options simply not avalabile to me and dirving me nuts! I have an imate Jam:
R 1.01.00
G 1337.38
D 1.03.00 WWE
Bluetooth is well and truly turned on but Resco (2003 v5.13) only gives Infrared & Email options. No Bluetooth option on file explorer either!
Am I missing something here - have tried soft resetting after turning BT on and everything else I can think of.
Some forums talking about MS BT stack limitations but don't understand why you guys see the Send via BT option & I don't?
Thanks,
M
There is no "Beam via Bluetooth" option, this is only for iPaqs, just select the "send to -> infrared receipient" option, this will also search for bluetooth devices aside from infrared devices. Remember to turn on your bluetooth first.
I can do with the File Explorer but no luck with Resco.
OK - got a response with file explorer - phew - thanks. No go with Resco though - sending to infrared recipient brings up a "Beam Files (OBEX)" screen but it does not find bluetooth devices.
When using Resco Explorer for sending files via bluetooth, you have to disable "Use IrDA via OBEX" for it to work.
Thanks ZX
Many Thanks for ur posts
Resco now runs smoothly... 8) 8) 8)
Can u receive files from a cell phone or other devices?
My friend was trying to send a file to me with his phone (Sony Errisson T700i) over BT, and it was able to detect my xda-mini, but was not able to send the file thru. Did i miss something?
Re: Can u receive files from a cell phone or other devices?
toner75 said:
My friend was trying to send a file to me with his phone (Sony Errisson T700i) over BT, and it was able to detect my xda-mini, but was not able to send the file thru. Did i miss something?
Click to expand...
Click to collapse
Did u "enable all incoming" in settings > connections > transmission/transfer on the mini?
Withoit this, your mini will refuse incoming files via bluetooth or ir.
greetings,
bgk
Hello,
I have been able to send easily via bluetooth, however i am having problems sending.
I have made partnerships, set myself as discoverable, turned bluetooth on (of course), used pass keys and friends phones says 'connection failed'
Any ideas? (O2 Exec)
Sama problem here
bye
nicoska
I have also had similar problems and found that not all phones, even if blue tooth enabled, are send receive enabled eg my my wifes samsung phone can send to me, but my jasjar has difficulty sending to her....
The friends phone would need to have switched on the "accept incoming beams" also setting, which isnt necessarily part of the partnership setting, but in the bluetooth settings itself as this enables OBEX as compared to say activesync, or headset features to allow file trfr's.
There is sometimes and OBEX setting somewhere that switches the file trfr setting on or off. I assume that you have done the obvious "accept all incoming beams" on your phone... not that you are accepting but sending.
Hi
Go to Settings,connections,then select Beams,check the box for Allow all incoming beams...
i did it but having the same problem. I'm using a JasJar.
bye
nicoska
I am too using Jasjar and i am able to do so...pls check yr settings again
I'm using Dopod 900 and having the same problem too...
I'm using SPV M5000 French and having the same problem too...
i have an m5000. With the Resco-Explorer i can send files via Bluetooth ti my ipaq h 4150, but i can't send files from the ipaq to the htc universal....
I had the same problem, not being able to send files to others. I was using Resco File Explorer, then I tried the built in File Explorer and it worked like a dream.
hdubli said:
I am too using Jasjar and i am able to do so...pls check yr settings again
Click to expand...
Click to collapse
Man i checked again my settings and all is correct, but have the same problem, as many others users here :-(
bye
nicoska
I can't receive anything from anyone via Bluetooth, I think it might be something to do with OBEX (whatever that might be :roll: ) does anyone know how to fix this?
RE
coercri
Quote
"I had the same problem, not being able to send files to others. I was using Resco File Explorer, then I tried the built in File Explorer and it worked like a dream"
Can the default File Explorer send file using bluetooth? How?
RE
OK,
Finally, I manged to send/receive file to and from my QTEK 9000 and my notebook using bluetooth and default File Explorer
Did you change any settings?
RE
On my PPC side I turned on "Receive all incoming beams". My PPC only shows Incoming Port (COM0)
What I did for my notebook is to add Incoming (COM5) and Outgoing (COM7) COM Ports
For sending file from my notebook to my PPC I just select "Send a File" and then select the file to be sent
For sending a file from my PPC to my notebook I select "Receive a File" from my notebook and then selct the file to send from my PPC and send over using bluetooth
i couldnt get my pro to recieve a file via bt...had to download it via the web
RE
Tested sending/receiving file with my QTEK 9000 and SE 700i handphone
No problem at all
Mine just won't receive anything from anyone :x
RE
trapper
Have you checked to make sure that your PPC and the sender's device must be visible to one another ie. they must be make discoverable?
:roll:
The only bluetooth functions I get on my MDA Pro are Headset and Serial Port. I'm desperate for File Transfer... does anyone know how to get it? Thanks!
They are there, just not visible..
Try sending a file to your Universal through BT, and it shall recieve it..
Make sure that the beam settings are "Accept all inncoming"
if you use the inbuilt file explorer on any file, you can press and hold, then select beam file. if bluetooth is on, it will:
1. search the infra red port
2. Search all surrounding devices with bluetooth on, and discoverable.
then you can just select where you want it to go.
Transfer files using bluetooth
Does anyone know how I could transfer a file from my Qtek 9000 to my Nokia N70 (Symbian OS) using BLUETOOTH. When I pair the two I get "Dialup networking” only I cannot find a way of transferring files from one device to the other. Please include step by step instructions if you know how.
Thanks
Re: Transfer files using bluetooth
avensis said:
Does anyone know how I could transfer a file from my Qtek 9000 to my Nokia N70 (Symbian OS) using BLUETOOTH. When I pair the two I get "Dialup networking” only I cannot find a way of transferring files from one device to the other. Please include step by step instructions if you know how.
Thanks
Click to expand...
Click to collapse
1. Enable Bluetooth on both devices;
2. Open File Explorer, go to the desired file, hold the stylus down (like right click on a PC) and choose "Beam File" (this works with Bluetooth as well as Infrared)
3. Choose Nokia N70 or its assigned device name when you see it on the list
File sent as a message not as a files transfer
Yes thanks i tried doing what you suggested, but it sent the file from the Qtek 9000 to the N70 -> recieved it as a message and i could not save the actual file anywhere on t he N70?
Well, what does the message look like? What type of file are you trying to transfer? I would expect you be able to save an attachment or something similar. I'm afraid I'm not familiar with the Symbian OS.
Bonzo said:
They are there, just not visible..
Try sending a file to your Universal through BT, and it shall recieve it..
Make sure that the beam settings are "Accept all inncoming"
Click to expand...
Click to collapse
Either I'm doing something stupid here, but.. if I send a file from my desktop to my MDA Pro (BT enabled, accept incoming beams enabled) I just get a message saying 'ftp service not found on target device'
If I explore available services I can see DUN and Voice Gateway... am I missing something?
Re: File sent as a message not as a files transfer
avensis said:
Yes thanks i tried doing what you suggested, but it sent the file from the Qtek 9000 to the N70 -> recieved it as a message and i could not save the actual file anywhere on t he N70?
Click to expand...
Click to collapse
Im very familiar with symbian OS but new with PPCs so should be able to help!
Install a file explorer such as fexplorer onto your n70. Fexplorer on the root page has a mail option, and when you enter it, you can see all the files recieved via btooth/mms. Copy the file and paste it to your desired location using fexplorer. Alternatively, if the file explorer you use doesn't have the "mail" option on the home of the sw, visit x:/system/mail (x= c or e depending on where messages are stored) and browse throygh the folders until you find the attachment and paste it to where you want.
Thanks
Thanks very much, i did what you said, but the mail opton was not there, instead i found the Inbox directory and there was what i was looking for, so thanks again...
I don't know if anyone remembers the old widcomm bt versions on blueangel, but u used to be able to browse other devices and stuff, well, I'd like to be able to do this, I miss this function....
is there 3rd party software that can do this?
I don't know if anyone remembers the old widcomm bt versions on blueangel, but u used to be able to browse other devices and stuff, well, I'd like to be able to do this, I miss this function....
is there 3rd party software that can do this?
joey jojo said:
I don't know if anyone remembers the old widcomm bt versions on blueangel, but u used to be able to browse other devices and stuff, well, I'd like to be able to do this, I miss this function....
is there 3rd party software that can do this?
Click to expand...
Click to collapse
something like this? http://www.silentservices.de/btCrawler.html
Browse and BT transfer data from deviceA to deviceB
I check BtCrawler it does not let you transfer files between device, what i am looking for is something like a file explorer where (once two devices are connected via BT) then one can copy files (using a fileexplorer type of interface from one location in device A to another location in Device B. Veyr easy stuff really but cannot do it anymore in Qtek 9000 WM5, whereas in my Blueangel WM2003 i used to have that exact functionlity, and i used to do it by transfering files from my Cellular camera to my PDA.
Re: Browse and BT transfer data from deviceA to deviceB
avensis said:
...what i am looking for is something like a file explorer ...
Click to expand...
Click to collapse
OK, got you this time. WM5 only supports Obex-Push (trabsfering V-Cards and stuff). It currently does not support Obex-FTP which is exactly what you are looking for. Maybe some future updates from M$ will add this functionality, so I hope...
cheers
Thanks, but if you find any software that provided the " Obex-FTP" on the WM5 PDA could you please send me a message.
isnt it possible that we can update the bluetooth stack to the widcomm one?
daven said:
isnt it possible that we can update the bluetooth stack to the widcomm one?
Click to expand...
Click to collapse
I'd like to know if this is possible.
Hi
I was rather disappointed to see the poor BT support on my newly acquired iMate JasJam.
It supports almost no BT profile
In particular OBEX (file transfer).
I found some references to some BT extension to the Microsoft BT stack, but they don't seem to work.
Any ideas if there are ways to extend the functionality of BT with this device and add some common profiles like OBEX, FTP etc?
Thanks
JY
Just wanted to start a similar thread. I was quite disappointed finding out that I can't receive e.g. a CAB file via BT! Though it sends all OK
Lurker0 said:
Just wanted to start a similar thread. I was quite disappointed finding out that I can't receive e.g. a CAB file via BT! Though it sends all OK
Click to expand...
Click to collapse
Could it be because you need to turn on 'receive all incoming beams' under start>settings>connections>beams
try it. i heard that its coz of this.
Of course, this option is turned on!
Hi all,
Don't know if I'm missing something but i can send .CAB, .WAV, .MP3 etc files both from and to my SPV M3100/Laptop (or desktop).
Beam is on.
Gavin.
jyavenard said:
In particular OBEX (file transfer).
Click to expand...
Click to collapse
Actually, it should work - the MS BT stack has a pretty good OBEX implementation, as has also been pointed out in several of my, related articles; for example, http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1065&more=1&c=1&tb=1&pb=1
Probably it depends on firmware version... btCrawler self diag shows for me only OBEXObjectPushService, and only if that option is turned on. No OBEXFileTransferService at all.
Other services shown are not related to file transfer (audio, modem, serial ports).
Do you (who's able to receive any file) have OBEXFileTransferService on your device?
Hi i wonder if anyone can help,
Now i seem to have had this problem with every HTC phones i have used (XDA orbit, steller, mini) and now my HTC HD2. why cant anyone send me files, pictures, music anything via bluetooth. We get all paired up and eeverything but when they send it to me it just comes up connection failed?
Now i know my bluetooth works on all me phones as i sync at work and have handsfree in the car, so i can only assume its settings but i have look at all of it and cant figure where im going wrong?
thanks in advanced
shane
Hmmm . . .
Do you click "Accept" for the file transfere ? (Bottom left of screen (soft-key))
(After accepting the conneciton, the file transfer itself needs to be accepted as well)
Besides that - to transfer files from my computer, I had to enable the file transfer protocol:
Settings->menu->all settings->bluetooth->"Gears" tab<left most tab ***>->Advanced<+> ->File transfer->allow incoming file transfer
Som30ne said:
Do you click "Accept" for the file transfere ? (Bottom left of screen (soft-key))
(After accepting the conneciton, the file transfer itself needs to be accepted as well)
Click to expand...
Click to collapse
It never gets that far, i dont get the option to accept, on my mates phone it just says connection failed. i dont get anything on my screen, but we are paired up so its not like they cant find me phone etc. it just says connection failed, when they try to send it to me. i have also left all visibilty etc on, and even keep my phone ruuning (i.e. not standby) and still no luck.
Som30ne said:
Besides that - to transfer files from my computer, I had to enable the file transfer protocol:
Settings->menu->all settings->bluetooth->"Gears" tab<left most tab ***>->Advanced<+> ->File transfer->allow incoming file transfer
Click to expand...
Click to collapse
I have tried this option with the paired phones, but again no luck, however i have no problem sharing pictures etc from my PC. sending files etc via bluetooth and my computer at work, works fine. its just people sending files etc from other mobiles???
this is what is confusing me, but i have had the problem on all xda's i have had, so there must be another setting.
cheers
No one has any ideas then?? its bugging me now
Can't help you mate.
All I can say is that on all my HTC phones (Diamond, HD & now HD2), it's worked fine - never had a problem.
I also had this very same problem. I have a Kaiser (vodafone v1615) and i was able to send files via bluetooth, but not to receive them. Then i found this thread and now the thing is working:
http://forum.brighthand.com/showthread.php?t=227899
Basically the solution is:
TIP: Make sure you enable “Receive all incoming beams” if you want to receive files / PIM records over Bluetooth on Pocket PC’s with the Microsoft Bluetooth stack!
Click to expand...
Click to collapse
This can be done in "start menu"->"settings"->"connections" tab->"Beam"
Just that simple check.
Let me know if this works for you.
I have this exact same problem! Unfortunately the quote above only applies to Wm6.1 and below that use the microsoft bluetooth stack.
On this occasion HTC have plumped for their own buggy version.
see http://forum.xda-developers.com/showthread.php?t=585081
I think there is some conflict between obex push and obex file transfer. I have a toshiba bluetooth stack on my winxp install and the bluex utils on my linux partition. Neither of them work anymore on wm6.5 whereas they did on my wm6.1 polaris.
i dont have a connections tab on the HTC HD2, well i have a connections page but i dont have beam as a option??
Subsx said:
i dont have a connections tab on the HTC HD2, well i have a connections page but i dont have beam as a option??
Click to expand...
Click to collapse
You wont have "beam". "Beam is part of the Microsoft Bluetooth Stack. The HD2 has the widcomm stack.
optiknerv said:
You wont have "beam". "Beam is part of the Microsoft Bluetooth Stack. The HD2 has the widcomm stack.
Click to expand...
Click to collapse
Ok but im guessing then that no body can help or even have the same problem??
well, I may be a few months late, but here's my solution, at least it might help new HD2 users:
go to settings tab, choose "all settings" from the right menu button
choose bluetooth, and then click on the settings tab (the one with cog wheels) make your device dicoverable, then from advanced>connectivity>remove the check mark if you don't have your friends' de3vices paired with yours.
finallyadvanced>file transfer>check: allow incoming file transfer connections.
to make this a bit faster you can browse your windows library via file explorer and create a shortcut for the bluetooth program in the start menu (this will also enable you to add a shortcut in the manila today
hope this helps