I had a problem because my touch screen was crazy, so I opened my Universal and cleaned the screen carefully. It solved the problem : I was able to calibrate again the touch screen.
10 mn ago I hard reset it, and now the screen is reversed (I have to look at it in a mirror in order to be able to read !). The touch screen is OK (I am able to navigate in the menus but have to stay in front of a mirror...)
Any idea how to solve this ?
replace flex cable.from mainboard to lcd
In order to do this, SEARCH in the Wiki for Universal manual
Good luck
Related
Hi to u all
i have a major problem with the screen alignment
there was a small damage on the foil thats on the screen of the tytn
Now i have flasht a new rom image and got stuck on the screen alignment
i can press the small X and it will move and starts over and over again
is there a way to bypass the screen alignment
Hope there is someone who has a solution
You need a cab install called remote screen alignment. You also need another Hermes to get the alignment settings off.
''remote Screen Alignment gets the alignment settings and stores it on your pc. If for some reason you require them to be re-entered but can't do so manually it can fix this. It was originally intended for people with poor eyesight or other problems who had trouble hitting all 5 points on the calibration. Its a freeware cab.
Hope this helps...
After a busted screen I replaced the LCD and Digitizer. After that I didn't make any changes to the software (ROM, nor settings) of the HTC.
LCD works fine, but my screen alignment is bad. On almost all items I have to thick on one item beneath it to get it, also some items are not reachable due to this problem.
I managed to start the alignment proces with the use of the Remote Alignment tool, alle goes well but the upper two crosses. The digitizer simply doesn't respond to these and after al while starts over again.
Is it normal that you have to align your screen after a digitizer replacement?
Will it help to hard reset my HTC? (I'm using a hacked ROM, last one from Dutty WM6.5, so it doesn't start automatically with the alignmentproces)
When the upper crosses don't respond in the alignment proces, does this mean the Digitizer isn't ok?
I found a thread about Remote Screen Alignment on this board (/showthread.php?t=355010). Will this help for me? The phone is almost unusable so installing / using PHM Registry Editor will be almost impossible.
Lot of questions, hoping for some answers
Almost 2 days, 69 views and no answer?
Please guys, I'm missing my beloved HD
Hello,
after the last downpour, backllight of touch screen in my Hermes is not working (touch screen is working properly)- there was probably short circuit.
how can I fix it?
Best Regards
Vvi
FIXED
I have similar problem, how did you fix yours?
My solution
I had the same problem a few months ago and since then it hasn't happened again.
I open the device - unscrew every screws - until I have the screen separated from the rest. Then I put (and this can vary of course) a pills blister to tighten the screen - I found this would work because if you press the screen with your fingers in the right bottom corner the light comes up.
I recognize the explanation is not like poetry but I cannot find a better way to describe what I have done. I hope this helps!
Good luck
Hi all,
I had a touchscreen issue (sometimes not working) in my HD2 so I ordered a new fabric screen+lcd assemby. I replaced it very carefully but now when I plug new lcd it is not working. Phone is working, buttons, vibration, hear the sound when turning on but there is only backlight on display and just shows black screen. I am sure that display is ok because I tried to put old one (wich was still working before replacement) and it has same issue (backlight works but display is black). Can you give me some ideas what is wrong ????
damaged lcd ribbon connector on mainboard or ribbon not being inserted fully or latched securely
Ty booting to bootloader ...
Help
The flex cable is not attached correctly or the main board is broken and before you close your phone try it. If you can't do this give someone your phone and he will recover for you.
The problem is sloved. I dissasambled all phone and fix it once again and now it works. Anyway I got another problem of white screen on my second device. Did anybody find a solution for white screen ever????
wojcimierz said:
The problem is sloved. I dissasambled all phone and fix it once again and now it works. Anyway I got another problem of white screen on my second device. Did anybody find a solution for white screen ever????
Click to expand...
Click to collapse
Have you tried turning phone on with volume down button pressed???
You should see 4 colors. Try this. I search for you.
http://forum.xda-developers.com/showthread.php?t=2263026
try with this link.
Yes I have read this before but I think that white screen problem is not sloved in this thread. But maybe I could be wrong.
Hello everybody,
I have a accidentally cracked Pixel 4. The Display cracks after it falls from around one meter height. I decided to fix the screen and buy a new one. It seems to be not an original Bit the board of the new and the old screen seems to be exactly the same. I opened the phone and replace the screen without any damage. After the screen was inserted I test it if it woks. Success! Everything works (I not tested the touch Funktion yet) after I build most of the things together I give it another try and I recognized that the touch Funktion does not work. No matter how hard I press or hold the connector down etc. I tried many things also a Hard Reset. I never seen such problem before. And my question is: is this the screen, the phone or a software problem? And how I can fix this issue? I am completely confused because I fixed many phones but something like this is new. Regularly the complete Amoled does not work.
If I go to the left upper corner, there is some movement in the screen and this also stays if I release my finger (video).
Video 1
Video 2