No screen, No LEDs, No Sound but still works? - 8125, K-JAM, P4300, MDA Vario General

This is really strange but I put in my Wizard into my hibernation in my desk drawer for a couple of months and got it out again yesterday. When I went to turn it on I got nothing from it.
I then plugged it into my PC with no luck from the LEDs for charging. After hitting most of the buttons I here a USB noise from my computer and the device starts to sync! I then used True Connect screen share and to my surprise the device is fully active. I can't think why it's not working? Has anyone got any ideas?
Sam

Related

portrait mode keep beep beep sound

Please help with my QTEK 9100 when it start with portrait mode keep beep beep sound (with out touching any thing ) and when I try to go setting or program keep me getting back with today screen and make beep beep .. sound and some times it works with landscape mode and when I try to back to portrait mode again start beep sound please help is it hardware problem or ( I disassabled it and didn't get any lose connection ) please help me ..
thanks so much
Maybe you could try to overclock your wizard a little bit with omapclock. works for me. maybe your problem is different than mine though, as my phone also beeps in landscape mode.
deleted post
Its not the display flex cable, kbd, nor the display
My g4, o2 is doing the same thing. i think that there is some manufacture problem with these devices. Here is why i am saying so.
i thought it was the cable also, so i disassembled it and put it back together, then it kept on doing the same thing. Then i thought of just disabling the keyboard, because it is typing the o key, which is making the beep sounds and eventually turning the screen to these funny lines with a white background as if the display cable is broken. When i turned it ON without the keyboard, there is goes again. beep beep beep beep typing out the o without the keyboard, therefore i decided it had nothing to do with the keyboard system, and may not even have anything to do with display cable or even the panel.
I then totally removed to display panel as well, leaving me with just the chips board in my hands. Connected that to the batt and switched on, and after a little while when the system had booted... there it fires the beeps again in the dark, WITHOUT THE DISPLAY PANEL, ITS CABLE AND THE KEYBOARD PANEL AND ITS CABLE AT ALL. So the problem was not the fle cable nor the keyboard, but is coming from the system board.
Could this be a software internal problem or a hardware chip problem of some sort?
does anyone have an idea?

Phone won't turn on

I just unboxed my T8285 yesterday. I charged it up and the green light came on which I assume means it's fully charged, so I put my sim card in and turned it on. It buzzes when you press the power button and when I hold it next to my speakers they make that noise that speakers make when someone's phone is ringing too close to them, so you can tell it's turned on and connecting to the network. But nothing shows up on the screen, it's as if the screen isn't turned on. Also, I tried calling myself from another phone, and it rings (it doesn't go straight to voicemail like it would if the phone were just turned off), but the device doesn't make a sound or turn the screen on like it should when it's coming out of standby. Anyone know what's happening?
Uhm, that sounds crappy... Normally by pressing the on/off button the screen should turn on/off. But then it's still weird that it doesn't turn on while calling. At the back of the phone is a small red button, this resets your device, maybe pressing that one helps?
Good luck! I hope you'll get it fixed.
rpimps said:
I just unboxed my T8285 yesterday. I charged it up and the green light came on which I assume means it's fully charged, so I put my sim card in and turned it on. It buzzes when you press the power button and when I hold it next to my speakers they make that noise that speakers make when someone's phone is ringing too close to them, so you can tell it's turned on and connecting to the network. But nothing shows up on the screen, it's as if the screen isn't turned on. Also, I tried calling myself from another phone, and it rings (it doesn't go straight to voicemail like it would if the phone were just turned off), but the device doesn't make a sound or turn the screen on like it should when it's coming out of standby. Anyone know what's happening?
Click to expand...
Click to collapse
If you have just unboxed and experienceing these issues it sounds like a faulty device caused by either loose connections in screen/motherboard
I would return device and get replacement under warranty or to shop you purchased it.

[Q] stuck in bootloader

my phone was working fine today listening to fmradio at work all day,then at the end of the day i notices i was low on battery so i turned off phone and put in my pocket,so i go to turn back on im in bootloader with no key responce or nuthing,i have ''S' OFF,and i need help anybody???????
So volume up and down don't move the cursor? And when you use the power button, it doesn't select what the cursor is on? Have you tried to pull the battery to turn the phone off and plug it in to get a full charge? What else have you tried?
stuck bootloader{ FIXED}
i took it apart,i workout side and debris got down in the volume rocker causing it to be consantly down,thank god thats all it was, i was worried for a min,thanks for a responce i think this is the best phone site ever,thanks again ronin!!!!
Glad you got it figured out and it was nothing major...

[Q] Stop screen from turning on too often (connect/disconnect charger, headset, etc)

I'm getting fed up of the screen turning itself on for things it really doesn't need to - for example:
connecting the charger cable
disconnecting the charger cable
getting to 100 % charged status
connect headphone cable
If I do want the screen back on at those times, I could just press the Home button. Any suggestions on how to stop this annoying functionality as I can't find an option for it?
Andre
I would like to know this as well. As would everyone else who charges it at night, I imagine. (Preferably without the need to root.. But I doubt that's possible.)
Would like to add "When answering call over headset" to that. It keeps muting itself in my pocket because of that every. single. bloody. time!
I normally have the "don't turn screen off while charging" mode enabled, so I can see it when it's on my desktop stand, and just manually turn the screen off with the power button once I don't need it. But the bleeping thing turns itself back on when charge is at 100%, and so it then stays on unless I'm there to turn it off. So I've have had to disable that mode.
There's a perfectly good LED to show me the charging status, why do I need the whole screen to wake too?
Andre
Any ROMs or kernels out there that anyone could suggest which support disabling the annoying screen-wakes on 100% charge, connect-to-charger, disconnect-from-charger, headset insert, etc.?
Andre
For anyone else looking for the same answer, try Wanam's Xposed module (http://forum.xda-developers.com/xposed/modules/app-wanam-xposed-customize-stock-t2383484) which allows you to disable a number of the more pointless screen-wakes (including 100% charge, and unplugging charger). Hopefully he can fix the remaining ones at some point too.
Requires root of course.
Andre

Outside buttons dont work, phone powered off... HELP

Ok.. so.. the buttons (power, volume up and down) buttons stopped working a while ago, and it hasnt been an issue for me.. i just turn the display to turn off in 15 seconds and have the screen come on occasionally. But.. recently, my car stopped seeing the audio bluetooth (while still seeing phone bluetooth) so i had the bright idea to let the battery drain and "restart' my phone..... without thinking that the buttons dont work..
so now the phone is off and i cant get it to turn back on.
I downloaded adb, and tried to fastboot it, but my phone wont recognize the phone without "allowing" the computer to see it through the phone.. which is currently turned off..
Anyone have any ideas on how to get my phone back on without finally giving in and getting the buttons fixed?
Shantor88 said:
Ok.. so.. the buttons (power, volume up and down) buttons stopped working a while ago, and it hasnt been an issue for me.. i just turn the display to turn off in 15 seconds and have the screen come on occasionally. But.. recently, my car stopped seeing the audio bluetooth (while still seeing phone bluetooth) so i had the bright idea to let the battery drain and "restart' my phone..... without thinking that the buttons dont work..
so now the phone is off and i cant get it to turn back on.
I downloaded adb, and tried to fastboot it, but my phone wont recognize the phone without "allowing" the computer to see it through the phone.. which is currently turned off..
Anyone have any ideas on how to get my phone back on without finally giving in and getting the buttons fixed?
Click to expand...
Click to collapse
Fastboot and ADB won't do any good if the device if off, permissions or not... all you can see is the Qloader mode which is useless on this device. I don't know of any way to "kick start" this device, or any other newer Moto device, to turn on without a button press. Sorry.

Categories

Resources