Using WM6 and Artemis devices, how would I programatically get the SIM number via the device? I need to get the device to send back the number with OTT messages.
Thanks
Puff
Related
Is there any kind of a fix for the problem of being unable to use the SX56 to dial in to an ISP?
No matter what settings I use I get the same message back after a short while "no modem at the number being dialed".
I understand that the old 2002 version could do it so what has changed the 2003 version?
Hi,
I am using an unlocked T-Mobile MDA compact II in India.The phone is running fine except for a small problem.It sends out a message almost daily(may be when i replace my SIM card) which appears of type 'application' in my phone bill.I have also used the antivirus software on my phone but didnt detect any viruses.
In other phones , you have an option for ''Confirm SIM service actions'' , where it confirms with the message "Allow SIM card to send message'' when you insert your SIM card.However, this choice is not available here.
Is there any registry entry to be modified to change this setting ? or are there any other options available ?
Pls. help .thx in advance.
Hi, I'm using RIL to send APDU commands to SIM. It worked fine for HTCs, versions:
HTC S310
radio 4.1.13.20_02.41.90
HTC QTEK
radio 02.07.10
while I'm not receiving response data when sending an APDU commands on
HTC S730
radio 25.62.30.03H_1.58.17.02. The callback response handler only receives the status word, not the data
I guess this has something to do with the OEM custom implementation of RIL. Is there any way to have back the SIM data from ril, is it possible to intercept this data, override the RIL data receiver, or whatelse?
thx a lot
Antonio
Can you let me know what software you use to send ADPU to the SIM. thanks!
If I have understood your question, I'm developing an application on Windows mobile for pocket pc 5.0, using visual c++,
Hi, Antonio.
Can you give an example of code where you have access to sim card using apdu commands?
Hello, Antonio73. Have you ever solve the problem? I was interested in this problem too. I want to know how to send APDU command to SIM Card, can you help me ?
hi all, since i flashed spl all works ok except when I try and install a work application called good mssaging it says unable to retreive handheld serial number and Rom version....is there a way to electronically insert my serial number?
Thanks
Urgent matter. I bought a huawei P10 lite from another person, I performed a hard reset and when I finished I can't get any signal on my device. It reads no service or emergency calls only. I tried everything on the net but nothing. The code *#*#4636#*#* doesn't work. The code that does work is *#*#6130#*#* but it's not very helpful. Can anyone help me to turn the radio on. Which code are for this process. Please send me solutions because it's urgent because I can't use my device.
Most likely, the phone is Locked to some mobile carrier.
Unfortunately there is no free way to unlock it!!!
About 3 weeks ago I had the same problems with P8Lite.
Paid solution:
- Go to https://www.dc-unlocker.com/buy and buy 3 credits (3 Euro) and create new account
- After a successful payment on your email you will receive Username and Password (check the Spam folder)
- Download HCU Client - https://hcu-client.com/download/
- Login with your Username and Password
- Put your P10Lite in the Manufacture mode
- Type this: *#*#2846579#*#*
- Go to ProjectMenu -> Background settings -> USB ports settings -> Manufacture mode
- Then connect the phone to PC via USB cable
- Press Read Phone Info
- Go to tap Unlock and press Direct SIM Unlock
- Finally, on the right side you should see Unlock done and the phone will turn off
- Turn on your phone and it will be unlocked.
Tested and works on P8 Lite, HCU cliend support P10 Lite and you can unlock it.
I think that it isn't locked because I tried with 3 different sim cards each in different mobile network.
I am still waiting for solutions. Thank you.
Some problem with IMEI or OEMinfo maybe ?.. try flash new FW
Still the same problem. Does anyone knows the shortcut to engineer mode? The new code because I found on the net some old codes but they didn't work.
There is no engeneering mode in P10 lite.
But as I said, I'm almost sure that phone is locked. Ask the previous owner what SIM card (mobile carrier / country) was used.
There is one other menu that is ProjectMenu
Insert you SIM card and check you SIM Lock status:
*#*#2846579#*#*
ProjectMenu -> Network Information Query -> SIM Lock Info
If you get "SIMLOCK_DEACTIVATE" then all it's okay and your phone isn't locked. But that means you probably have other big problems!
Can your phone has physically malfunction? Sim slots problem?
Also why you didn't test the phone before buying it?
Have you thought about mobile repair service?
Still the same problem
I installed a new software using update option and I get signal for five minutes but I wasn't able to use it because it didn't connect to network, then the no service and emergency calls only appear, oscillating between sim cards. The sim cards used are in different mobile service.
If I install Oreo the problem could disappear?
If so can anyone send me the link that I can download and install using update.app method?
If not could you suggest me a different solution.
Now shows that it's charging but the percentage of the battery drops.
Could be the same software problem?