Related
Dunno what is going on here - I had this problem occasionally with E200 / C500 on Orange, but not to this extent.
Sat at my desk, I suddenly get a Voicemail notification. Strange, as the phone hasn't rung. So I decide to test it.
I get NO ringtone on the phone I'm calling from. Nothing at all. Then it cuts straight to VM. (Phone is sat with full signal, and connected to UMTS network). I phoned 5 times, all with the same result.
Then I hung up the UMTS. Same thing happened.
I did a soft reset and left it in clamshell mode, and phoned again. This time I could clearly hear the ringing on the phone I was calling from, but the device didn't ring / vibrate or anything.
I opened it up and had a message "The phone operation failed" so I hit OK on this and closed it back up again. Phoned it again and this time it rang properly. I hung up before connecting, and got the "Missed call" notification.
Its not (entirely) down to being connected to UMTS - as my phone reconnects automatically as soon as it starts up.
Anyway, having dismissed the "You have a missed call" notification, I tried again. Its back to its original state now, no ringing heard on the phone you call from, and nothing on the phone itself. I only got ONE missed call notification, despite calling it around 7 or 8 times in all.
What the hell is going on here? It almost seems like the phone itself signals to the network that it is totally unreachable (hence no ringing heard by the caller).
I assume you haven't set up diverts or anything?
Get your network provider to do a test and see if they can give you any further information.
Failing that, it's possible that if you stopped the ExtROM from fully installing, it could be causing problems? Or maybe even some sort of task manager may be 'killing' the phone services?
I hadn't set any diverts, and it was the oddly random nature that was cause for concern - it worked after the soft reset, but didn't work beforehand. I can't be doing with a phone that, for its own reasons, refuses to aknowledge an inbound call! This should take precedence over anything else the "phone" is doing at the time, surely...
I've got T Mobile to send me out a reset of my profile (a text message which I delete, then power off the device) and I'll see how it goes.
I did have SBP PocketPlus installed, but no longer... I've not got much installed at all, at the moment.
Strongly considering flashing to the iMate ROM at this moment!
After removing the battery I retested. It was fine.
After writing the last post, I retested again and its broken again.
B*llocks.
The same as you my XDA Exec, oftern misses calls, ( you ring your self and hear it reing bu the phone makes no noise) i also had the same on my XDA2i, and yes removing the battery fixes it for a while.
Also mine when it looses service ( witch is oftern ) it will not go back into service until i soft reset it
John
Hmm, sorry no clue.
I have a JasJar and no-one has told me off for missing their calls. (I take quite a few from work, but rarely make any myself)
Maybe try a ROM flash, but I'm sure other Exec users are not having these problems, so it sounds like it might be something other than a ROM issue?
I've just stuck the iMate Rom on it. Was probably going to do it anyway, but didn't want to break my TomTom setup...
I'll do some testing and will repost on this thread with my findings.
I'm still getting the problem with the iMate ROm installed.
When I go to the Phone settings, it thinks I'm on the UMTS T-Mobile UK network. Now I'm sure this is fine for data, but maybe its not OK for voice, or something like that?
Can anyone let me know what they have in those settings?
Spotted this too on the Jasjar - can't pin down why though as it only appeqars to have started recently
Stu
I'm becoming certain that my data connection is effectively hogging the phone and not allowing voice traffic. I just had problems sending a text message. Every time I hit send, it failed (about 6 times) and went into drafts. To get it to sent, I hung up my active data connection and tried again, and it went immediately.
This is a nightmare, as the device HAS to perform both voice and data functions. I want an always-on data device, but the data MUST be interuptable by inbound / outbound phonecalls as well as notifications (SMS etc).
Right...
I've dropped down to GSM instead of 3G by removing the "Auto" setting from the Band option within the Phone Settings. This appears to have solved the problem.
From looking at the network, it appeared my phone was always connecting to a network called "UMTS T Mobile" (this was even displayed on the occasional incoming call that worked as the carrier). I'm certain this is what is causing the problems. After a Soft Reset, it would still connect to this, as my OTA ActiveSync connection would start up...
Having changed to GSM instead, I'm now connecting to "T Mobile UK" as my carrier - and this is allowing full inbound/outbound functionality - albeit only with GPRS data connectivity.
I'm on T-Mobile UK, and MSN Messenger will happily be interrupted when I get a voice call?
I'm lucky enough to live and work in an area where I'm only ever connected to UMTS (although the setting on my phone is "Auto"). I'm 99% certain that I can get calls every time, and having tested it just now a couple of times it's working without any problems, so there must be something that'll sort out your problem?
sub69 said:
I'm on T-Mobile UK, and MSN Messenger will happily be interrupted when I get a voice call?
I'm lucky enough to live and work in an area where I'm only ever connected to UMTS (although the setting on my phone is "Auto"). I'm 99% certain that I can get calls every time, and having tested it just now a couple of times it's working without any problems, so there must be something that'll sort out your problem?
Click to expand...
Click to collapse
I'm lucky enough to live and work in an area immediately covered by whatever equipment may (or may not) be located a T Mobile's head office... :roll:
I cannot discount the possibility that they've erected a UMTS cell which they "tinker with", which may (or, indeed, may not) be causing my problems...
I guess next time I'm out of the area, and in a 3G coverage area elsewhere, I will revert and test it.
In the meantime, they've asked me to test by switching back to "Auto" and trying to phone my phone once in a while, taking note of when I call and whether I get through, and they'll endeavour to trace those calls and find out what is going on...
I hope you'll be sending them an invoice!?!
I have this problem now. I only noticed it after a ROM upgrade (to the latest TMUK ROM). What fixed your problem in the end?
Hi All
I have had a very similar problem and have been discussing it in a separate thread.
http://forum.xda-developers.com/viewtopic.php?t=62863
As you will see, it seems to me that it is a T-Mobile issue, but they don't acknowledge that it is a fault. I don't get the same problem when I put an O2 sim in my Exec.
Other than downgrading to GPRS, I don't think there is any fix.
Mark
Mark, I've had a thought. Do you (like me) have an old 5v T-Mobile SIM.
These SIM’s can be identified either by SIM serial number 893044 05 or 16 – up to and including 893044 50. SIMs with serial numbers 893044 52 and above will be ok- anything lower is likely to be a 5v.
There was an issue when I 1st got my MDA Pro. It had to be network unlocked by T-Mobile for it to work with my SIM. Is it possible that the ROM update as "re-awakend" this problem?
(Also posted in thread you link to)
Thanks for the idea, Slave1, but I don't think that is the cause of the problem. My SIM doesn't have a serial number anything like those you suggested (it starts 060080...) and I only got it a couple of months old and so I am sure that it is a 3G one.
However, now that you mention it, I did have a problem getting the SIM to work when I first got it. I had to get on to Customer Services to get them to register it on the network becuase, they said, the shop hadn't registered it correctly!
Mark
mburgin said:
and I only got it a couple of months old and so I am sure that it is a 3G one.
Click to expand...
Click to collapse
All SIMs are usable with 3G (it's the handset that make the difference)
mburgin said:
I did have a problem getting the SIM to work when I first got it. I had to get on to Customer Services to get them to register it on the network becuase, they said, the shop hadn't registered it correctly!
Click to expand...
Click to collapse
That's a different issue but just as frustrating.
I had another though. Is anyone using a T-Mobile SIM in an XDA Exec (or just using an O2 ROM) having the same problem?
Could it be a ROM issue?
I have the xv6800 and I'm on Verizon. I just updated my rom to 3.57.605.1 from Verizon's website.
After *228 I was able to make calls, but now I have this persistent error:
Data Call Failure
Error Code: 11
PPP Connection Error
I do not have a data plan and dont want one. I only use wi-fi. This popup is annoying.
Can somebody tell me how to kill it, or how to fix whatever is wrong? What on my phone is trying to use the data connection so I can disable it?
Verizon tech support was useless.
holy cow, go this too! what is this about?
Just flashed my new xv6900 today. everything is working, i believe...but keep getting this ppp error.
Any resolution on your end?
Nothing. I imagine we're some of the first people to go through this.
A week or two ago, Verizon issued a statement saying all new customers with pda phones as of November (not sure exact day) will be REQUIRED to purchase a data plan.
I think the *228 process is now going to verify a data plan on pda phones and since I dont have one, I'm stuck with the error. Either that or my phone cannot properly "handshake" with Verizon since I dont have the plan.
I was on the phone with support for 2 hours last night. They're useless. We even tried giving me a data plan long enough to let the phone sync with the server, but this morning I got the error again.
I'm sure someone can find a registry edit to get rid of the message. I think that would be enough for me. My only concern, is if my phone is persistently trying to establish that data call, it'll eat my already-weak battery up in no time.
That is why I'd prefer a solution to disable the whole thing. I'm still waiting on the kind people here at XDA. These guys know more about Vz's phones than they do.
In "connections" I deleted the Verizon data network connection, but it comes right back. I wonder if that was not there before the rom update and maybe that is what's trying to call out?
I had such good luck cook'n my 6700 but this 6900 is not so fun.
My message has gone away after about 10 minutes after the programming. even knowing i could do txtmsg and call on my phone i could not get into voicemail, it stated i could not be verifed...so I think it just needed some more time. i'm keeping my fingers crossed.
but now I have to flash again...more problems.
FYI: i do have a dataplan...
I was right about the battery problems at least.
My phone finished charging at 3:00 pm and sat on my desk (no calls or use) until 8:00 pm when I got an emergency low battery notification.
Whatever my phone is doing is blowing through battery life.
Sounds like normal life for a wm phone with the data turned on!
Must be looking and burning power just like roam does.
DMU RESET
According to the Verizon 3rd tier people I was speaking with last night they simply need to do a DMU reset on your account and phone. This is where they rebuild the account on their servers but first level tech support will never be allowed to help you here. This was done for me after the *228, *22899, *832, and many many other attempts at reconnecting my phone.
Hope this helps.
Thanks for letting me know! I was starting to think I wasnt going to get any help. I'm calling Vz tomorrow.
I called Vz tonight and they said there was no such thing as 3rd tier support.
He said DMU would only help if I had a data plan and I wanted to re-establish my data plan. I want to permanently disable my data entirely. Were you doing the same thing?
Either way they couldnt help me. If your issue was the same as mine, let me know and I'll call back and push them harder.
adampeoples said:
I have the xv6800 and I'm on Verizon. I just updated my rom to 3.57.605.1 from Verizon's website.
After *228 I was able to make calls, but now I have this persistent error:
Data Call Failure
Error Code: 11
PPP Connection Error
I do not have a data plan and dont want one. I only use wi-fi. This popup is annoying.
Can somebody tell me how to kill it, or how to fix whatever is wrong? What on my phone is trying to use the data connection so I can disable it?
Verizon tech support was useless.
Click to expand...
Click to collapse
I too have the Same Issue Any help?
Bump for help.
from howard fourms "http://www.howardforums.com/showthread.php?p=10377230#post10377230"
"Once gone from there, I deleted the connections under settings/connections/connections/mange existing connections and they've never reappeared since. So now I just create a new connection when I need it, and delete it when I'm done. It keeps me from going over my limit ($25 data plan). "
Deleted the connection and the issue is gone. FYI
This is my first contribution to xda-forums! I'm glad I can help at all when I've benefitted so much... Thanks to all!
NOTE: After the following steps, Modaco's Nodata doesn't even register that a data connection exists! For this reason, if you occasionally use 3g, you probably will want to use Nodata, and NOT the following solution. You just might have to open Nodata and disable the data connection every time you soft-reset.
I was finally able to completely 100% block the 3g data connection on my Verizon XV6800 (aka Mogul aka Titan) was the following three steps:
1. The key culprit is HTC_CM_Guardian.exe in the windows directory. I couldn't edit it or delete it via Total Commander file explorer, but I was able to rename it! This makes the OS unable to find the program when it tries to re-set the Data connection settings.
2. Under Settings > Connections > Connections > Advanced > "Select which networks are automatically used," hit "Select Networks."
3. Under "Programs that automatically connect to the Internet should connect using:" hit "New...".
4. Enter any name you want (mine's "nodata!") and leave all the other settings blank.
5. Save and exit! Voila!
Wifi--yes; 3g--no!
Modaco's Nodata program is awesome, but the problem was that HTC_CM_Guardian.exe re-enabled the data connection every time I reset the phone. Plus, HTC_CM_Guardian.exe would also thwart any effort to block data via the "Connection Settings." By renaming HTC_CM_Guardian.exe and creating a "nodata!" connection that programs auto-connecting to the internet would try to use (and fail), we get three results:
1. Modaco's Nodata doesn't even register that a data connection exists! For this reason, if you occasionally use 3g, you probably won't to use this solution.
2. When you reboot, the OS is unable to mess-up your "Connection Settings", so
3. Unless you have an active wifi connection, programs will try to connect to the Internet using the "nodata!" settings, which, being empty, will fail, exactly as planned.
Hope it helps.
I updated my jf 1.41 rc30 to jv 1.4.1 RC33. It updated fine and then i noticed my home button would not work, also my green call button does not bring up "dialer" like it use to but when i access dialer and click the green button over a contact it dials. Any ideas how to fix this?
chrisgol said:
I updated my jf 1.41 rc30 to jv 1.4.1 RC33. It updated fine and then i noticed my home button would not work, also my green call button does not bring up "dialer" like it use to but when i access dialer and click the green button over a contact it dials. Any ideas how to fix this?
Click to expand...
Click to collapse
Did you do a wipe?
no they said it was not necessary
I've ran into that issue a couple times, before I ever started using the modded images, and the only way around it I found was a wipe. To be honest I think the cause of my similar problem was related to the Locale app.
I got this problem too.. I did a reset to factory default and everythiing gone ok.
After upgrading to RC33 i had issues with AnyCut, it would not create a shortcut. didn't matter if i left it in the menu, ont he homescreen or in a folder. I ended up uninstalling it and reinstalling. then it worked fine.
I am thinking a wipe might be in order...just in case other hidden issues arise.
I've got a different problem. I don't have T-Mo signal at my house, so I only use WiFi to access the internet, and UMA on another phone for calls.
Last weekend, (which was the first time I tried to access data on edge or gprs, since updating to JF's ADP 1.41), I noticed I didn't have the E or G data thing next to the signal thing anymore. (We don't have 3G).
Then I tried accessing the weather, and all of my weather programs, as well as maps, market, and the browser said I didn't have a connection.
I didn't have much time to check things out, since we were busy. Today, we went to T-Mo coverage land again, and my data connection didn't work again.
I've checked all my APN's, and they look fine. I also tried changing them to wap, internet2 and internet 3, but no success.
Has anyone else had this problem? (I can send sms and mms, then I see the little data thingy doing it's thing, but that's the only time I see it since rooting). Also, If I call customer care, they will probably try to reset my phone. What will that do to my ADP? Should I tell them I have a Dev phone?
Or has anyone here got any tips for getting data back? (I did a wipe and reapplied the ADP ROM, but that didn't fix anything).
kathi17 said:
I've got a different problem. I don't have T-Mo signal at my house, so I only use WiFi to access the internet, and UMA on another phone for calls.
Last weekend, (which was the first time I tried to access data on edge or gprs, since updating to JF's ADP 1.41), I noticed I didn't have the E or G data thing next to the signal thing anymore. (We don't have 3G).
Then I tried accessing the weather, and all of my weather programs, as well as maps, market, and the browser said I didn't have a connection.
I didn't have much time to check things out, since we were busy. Today, we went to T-Mo coverage land again, and my data connection didn't work again.
I've checked all my APN's, and they look fine. I also tried changing them to wap, internet2 and internet 3, but no success.
Has anyone else had this problem? (I can send sms and mms, then I see the little data thingy doing it's thing, but that's the only time I see it since rooting). Also, If I call customer care, they will probably try to reset my phone. What will that do to my ADP? Should I tell them I have a Dev phone?
Or has anyone here got any tips for getting data back? (I did a wipe and reapplied the ADP ROM, but that didn't fix anything).
Click to expand...
Click to collapse
I'm experiencing the same problem now. Did you manage to get it fixed?
I have the same problem switching from wifi back to edge data... the only short term fix i have found to get the mobile net back is send a picture message to yourself. It causes the phone to create the connect and then you should be able to resume using the Edge data...
i was actually coming on here to find a fix for this myself.
diabolical28 said:
I have the same problem switching from wifi back to edge data... the only short term fix i have found to get the mobile net back is send a picture message to yourself. It causes the phone to create the connect and then you should be able to resume using the Edge data...
i was actually coming on here to find a fix for this myself.
Click to expand...
Click to collapse
Did you recently install any new apps?
I updated my WeatherBug, Steel, Personal Safety, SMS Popup and Discover and installed TetherBlu, TetherWiFi.
I have already uninstalled all of these and tried a reboot. But it didn't work.
I'm starting to panic. I'll try your suggestion.
this was the case right after i installed rc33 there was a thread about the radio that i had been posting on. Thinking my radio update made it so i could not get on market etc... but this was the work around i found for this problem. From the sounds of the other user who said he doesn't have TMo reception near his house. this radio was probably not meant for the non-3g users or there is something wrong with the default connect on the radio...
diabolical28 said:
this was the case right after i installed rc33 there was a thread about the radio that i had been posting on. Thinking my radio update made it so i could not get on market etc... but this was the work around i found for this problem. From the sounds of the other user who said he doesn't have TMo reception near his house. this radio was probably not meant for the non-3g users or there is something wrong with the default connect on the radio...
Click to expand...
Click to collapse
I've contacted Tmobile and it seems there is a severe network outage for 3G services that is also effecting some Edge networks as well. I've posted info on the site but people continue to post that they are having issues with data on their G1. They told me that it seems to be only on the west coast (west of the Mississippi) and the Tier 3 was being flooded by calls until 6am EST (for the customer service department to open). The network went down around 10pm PST and it is still pending. It's a good thing I decided to call first before reflashing!
Right but in rc33 it doesn't smoothly resume mobile edge from wifi. thats where i told the user if you send a test pic to yourself it will make the connection. Who knows about your network outtages...
diabolical28 said:
Right but in rc33 it doesn't smoothly resume mobile edge from wifi. thats where i told the user if you send a test pic to yourself it will make the connection. Who knows about your network outtages...
Click to expand...
Click to collapse
Hmmm... I've never had issues resuming an edge network after a wifi connection. I use wifi at home because INSIDE I don't get 3G. Outside (for some reason) I get full strength 3G connection at around 400kb/s. So when I wonder outside to check the mail while I'm downloading a new theme update it doesn't miss a beat for me. I lose contact with my weak a** wifi and jump right on 3G. No download error or anything. As for Edge... not sure. Sorry for the misunderstanding.
this was posted somewhere before...
cant remember where..
solution is to install anycut.
make a shortcut on the main screen, choose the shortcut to be "setup wizard"
this forces the phone to go thru the initial setup again..
most reported that after going thru this process again, home button works after that...
hope it works for u.
I have used my x1 for four months in America with T-mobile. The phone had no problem until yesterday. However, yesterday, the phone began to lose signal and automatically rebooted several times. Then, finally, from the afternoon, the phone totally lost the signal, and kept looking the signal.
I took out my sim card and plugged into another cell phone and it worked. So, I thought it was the problem of the rom. (I was using Touch-IT 4.5) I downloaded the new version of the rom, Touch-IT 5.6, then flashed it. However, it did not solve the problem. So, I flashed with the original SE rom. However, the phone didn't work either.
I contacted T-mobile, and there was not problem on the signal on my region. I thought it might the problem of data plan since I do not use data plan. So I used Advanced config and killed every option for data plan. However, it still does not work. I tried to do settings manually. changing band, carrier, and every possible options, but it does not work.
Interestingly, the phone worked two times today for a short amount of the time. However, after the reset, it is gone. Other than phone function, I do not see any problem.
Even now the phone keeps searching the signal. What can I do? I read another article that is similar to my case, and they say even after changing the sim card, it does not work.
Anyone has the same issue? What can I do? My phone is dead for two days, and it messes up so many things. Please somebody help me.
Have you tried redoing the connection setup?
try clicking on signal antenna then enter settings click on network and manual select your network, will take a few mins to find networks if it connects manualy just select auto again and hopefully it will fix it., worked with mine.
Thank you guys
Thank you guys. Yes, I have tried both of them, but it still does not work.
In Connection setup, I chose United States and T-mobile, and the screen to choose between T-mobile and At&t. I select T-mobile, and click Register. Then, it goes to the searching mode again, and nothing happens.
I assume that somehow, the phone finds networks, since it does show the options to choose (T-mobile, At&t). But something is not right, and it messes the set up. I do not know why.
I'm on Metro PCS with no problems until recently. Basically, my phone will not access the internet at home unless I use wifi. The 4G icon appears to be working but the page wont load. If I send a text I receive a message stating the text didnt go through but the person still receives the message.
Also, when I place a call at home it will not connect. The phone shows dialing but nothing happens. I've double checked the APN and did a factory reset but the problem is still there. All of these problems happened overnight.
However, once I get about a mile away from my home there are no issues. Its like the band/channel used in my area isnt being accessed.
Is there a way to reset the radio or make sure all available bands are used? Or is this an issue on Metro's side? I called them and they, supposedly did a full reset but that didnt work either.
Any ideas?
Thanks in advance.