Related
hi , I have a htc typhoon (amadeus) based qtek 8100 phone , by mistake I upgraded bootloader to a htc wizard bootloader rom ( IPL/SPL 1.01 ).Now the phone isn't opening turning on or powering up.When connecting to usb nothing happens.Sometimes, it blinks all of the keyboard lights (maybe sometimes that I play with key combinations). How can I repair and put the right bootloader into phone again ?
Note1: I am pressing cam button and connect usb cable nothing happens.
Note2: I can't access to the bootloader screen[/quote]
I and several others have already replied to you on this and several other forums. You need a service centre to flash the phone using JTAG points directly on the curcuitboard.
Asking over and over isn't going to change the fact that with a screwed bootloader you need to flash using JTAG. Do you think the more times you ask somehow it will be different?... :roll:
Richard
No other way ?
May anyone have JTAG schematik for Qtek 8100 ?
sorry wrong thread
i have recently purchased this phone and it is currently locked to t-mobile. I am a canadian resident using rogers network. when i turn the phone on it says NETWORK IS LOCKED PLEASE INPUT UNLOCK CODE. I know this number is generated by the IMEI if i remember correctly..... i just dont know how to go about accomplishing this. also ...my computer isnt recognizing it VIA USB............ i am just so at a loss for what to do ...please someone help
oh yeah the IPL is 1.08 and the SPL is 1.08 when i get to the bootloader screen that is all that comes up
As your phone is SIM locked,only t-mobile sim will work on it,but if you want to use any other network sim,you got get your phone SIM unlocked,to do so follow the instructions in the guide and perform the method correctly to get it sim unlocked. Check out this link for the sticky and guide:-
http://forum.xda-developers.com/showthread.php?t=249474
Good Luck
zabardast_1 said:
As your phone is SIM locked,only t-mobile sim will work on it,but if you want to use any other network sim,you got get your phone SIM unlocked,to do so follow the instructions in the guide and perform the method correctly to get it sim unlocked. Check out this link for the sticky and guide:-
http://forum.xda-developers.com/showthread.php?t=249474
Good Luck
Click to expand...
Click to collapse
as much as i would love to do the unlocking myself i cant even get the phone to connect to my computer VIA the USB cable everytime i try i get the " USB device has malfunctioned " so no go there. i cant even activesync it .
zabardast_1 said:
As your phone is SIM locked,only t-mobile sim will work on it,but if you want to use any other network sim,you got get your phone SIM unlocked,to do so follow the instructions in the guide and perform the method correctly to get it sim unlocked. Check out this link for the sticky and guide:-
http://forum.xda-developers.com/showthread.php?t=249474
Good Luck
Click to expand...
Click to collapse
as much as i would love to do the unlocking myself i cant even get the phone to connect to my computer VIA the USB cable everytime i try i get the " USB device has malfunctioned " so no go there. i cant even activesync it .
hoffmanbiker said:
as much as i would love to do the unlocking myself i cant even get the phone to connect to my computer VIA the USB cable everytime i try i get the " USB device has malfunctioned " so no go there. i cant even activesync it .
Click to expand...
Click to collapse
ok,
If there's a connectivity problem,there are a couple of things to verify it.First which windows are you using,if its winvista,you'll have problems,activesync doesn't work with vista,secondly its not recommended to work on vista.So get on with winXP and also get Activesync version 4.5 the latest.In activesync check the option 'allow usb connections' and in your phone goto settings---> connections and 'uncheck' 'establish all network connections' or something and then try to establish activesync connectivity.If still fails,than,
2. verify usb connectivity with pc, to do so get your phone into bootloaders mode (multicolor screen) by pressing and keep holding down the camera button and simultaneously push the Power On button,your phone will wake up and go into tricolor screen (Bootloaders mode)with ipl/spl showing in red colors.When in bootloaders,connect your phone with pc via usb cable,if a small usb appears at the bottom of the tricolor screen,then its has connectivity,but if doesn't appears,then you have a connectivity problem,so:-
a. either your usb cable is faulty,get a new usb cable and try again.
b. or usb input slot of your pc is not operating,try with a different usb input slot of your pc or even try out on an another pc.
c. Mini usb port of your phone is broken,get it repaired or replaced.
check out all these options and rectify the problem.
Cheers !
ok just to verify i am using wins XP and i have removed entirely activesync, reinstalled it checked to see if there is connectivity VIa boot loader and still it comes back that there is a usb malfunction is there ANY drivers i might need?
dude dont know about your unlocking problem, would be nice to hear that youv solved it... wouldnt it be nice if this world had no problems? but then saying that this forum would not exist... and troubleshooters wouldnt have jobs! lol
a) Unlocking NO...
b) active sync... Bluetooth... just rememberd you cant get in can you? to connect ia bluetooth?
email me privately on [email protected] and i may be able to help you if not ill find a way... a bit lost in the head (Attention Dissorder) cant focus...
sori
Sham
I have a T-mobile MDA G3 U.S. and I had it unlocked and flashed with some custom ROM I don't remember. I got a Herald couple days ago so I gave it away to a friend. As requested by him, I flashed it with a Chinese wm6 rom. However, it turned out he wanted to use touch flo and stuff so we found another Chinese ROM with that and flashed it. During the flashing process, I noticed an unusual long waiting time after the progress bar got to 100%. After succeed, the ROM turned out to be the original Chinese ROM again. I figured there might be some problem with unlocking so I unlocked it with lokiwizard tool again, but this time it won't even lemme update the ROM! RUU tool said "Communication error". The problem turned out to be the phone cannot establish USB connection under 3 color mode(when I plug it in under 3-color, computer sounds like you plugged in a failed USB device). Now I can't even flash it with the original T-Mobile 2.26 WWE! I tried hard reset and everything but I still can't connect under 3-color mode. Though that ActiveSync worked fine. Please help me!
(Maybe I can, in some way, flash it without USB?)
You got to have usb working to flash,check if the usb cable is faulty or the mini usb port of the phone.Did you try with a different usb cable or on a different usb port of the pc,even you can try with some other pc.If the usb cable is faulty,replace it,but if its the mini usb port of the phone,it'll have to be either repaired or replaced.
There's no other possible method to flash a rom,the only other method which might be possible is through Sdcard backup rom using MTTY commands,but its only possible if you had already backed up the rom on a Sdcard and the phone is already CID unlocked.
I tried replacing two more USB cables and on a different computer, still no luck.
Wierd thing is, I have USB working under ActiveSync, but not in 3-color mode. I don't know much about how the phone works but I figured the 3-color mode might be a part of SPL? And somehow I've damaged it. The phone still works fine, plus ActiveSync. It's just I can't flash it anymore.
thanks to zabardast,
it turned out to be I had tried with 2 faulty cables... =/
Well I'm still stuck with this ROM, I used lokiwiz03a to unlock my phone and it worked fine(IPL/SPL 2.26). When I was using RUU to flash it, I still have the same problem. Nothing was flashed, nothing happened. What should I do?
flatcoke said:
thanks to zabardast,
it turned out to be I had tried with 2 faulty cables... =/
Well I'm still stuck with this ROM, I used lokiwiz03a to unlock my phone and it worked fine(IPL/SPL 2.26). When I was using RUU to flash it, I still have the same problem. Nothing was flashed, nothing happened. What should I do?
Click to expand...
Click to collapse
Download WST_4.2.2 tool and run the 'CID Action' button to verify the CID lock/unlock status of the phone and proceed further,you need to use lokiwiz02b to work on G3 device for CID unlocking and not lokiwiz03a.
Secondly, Hard Reset the phone,it might be that Extended_Rom has got corrupted and download the official carrier's rom and flash it to recover back to its default working status and than go further.
I have just bought a singapore Sim locked handset .. I need to Flash a english rom and unlock it .. i have downloaded the rom the Hard spl but before that i was trying to update using SEUS but it went to the bootloader mode and itdetected the drivers then suddenly says one of the usb is malfunctioned and cannot reconize the device now i have tried 3 systems but nogo...i need help to get hardspl installed without using the usb port and a computer and then i can flash a eng rom on it using msd card.. and i have tried hard reset/chking in bootloader mode/and active sync also not working
have you try this?
Program --- Setting -- Connection ---USB to PC
clear ..... Enable advanced network funcionality
(Clear this check box if Activesync does not recognize the device)
goodluck
Or flash it with a generic ROM using the microsd method.
EDIT: Never mind. Read the first post too quick.
Thanks a lot .. it worked .....i unchecked it and it worked i have a english version of it now ..now one more problem left is simlock any solutions for that???? thnks a lot for helping me appreciated
Guys, I have a P3300 that has a non-functioning USB connector. Charging works fine, but it will not sync over USB at all. The device is not detected at all. Even in the bootloader screen, when the USB cable is plugged in, it DOES NOT say "USB" in the bottom corner. Basically, the data functionality of the USB port is fried.
I had used USPL to flash a cooked ROM onto the device, and when the USB port worked, it all went fine. Now, with the USB port not working, I can only flash a stock ROM onto the phone using the memory card method. If I try to flash anything other than the stock ROM, it says "certificate invalid" and won't do it.
I read somewhere that there might be a method of doing the CID unlock by using the memory card, since the phone will not communicate with the computer via USB to use USPL the normal way. Can someone instruct me on how to do that? I have the USPL files on my computer, and simply renaming the .nbh file in order to try to use the memory card method won't work.
Can someone help me figure out how to use USPL or otherwise CID unlock the phone over some method other than USB to the computer? Thanks,
Well you can use activesync over BT, right? That might just do teh trick + SD card flash after it reboots to bootloader.
I might be wrong, it's just a thought
I tried that, but the USPL loader kills Activesync right at the start. So once the phone soft-reboots into the white screen and AS is killed, there is no more BT connection. So the USPL loader fails with an error of not being able to connect.
Can anyone else help?
I faced the same problem. White screen. I removed SIM and SDCARD. So I can flash normally.
Wiki: Artemis SD Card Flashing
Try reading the Wiki on Artemis SD Card Flashing
Those having questions on flashing (i.e. updating) their HTC Artemis could try following these steps 1) Backup e.g. PIM Backup 2) disable standby and hibernation then remove SIM & SDHC cards 3) if necessary then cid unlock 4) recommend hard reset or update to the latest official build 5) if necessary Update SPL to latest 1.11.cmon 6) flash new rom then hard reset 7) put in SIM & SDHC cards and enjoy the result of the hard work by the developer
Also check out this thread Uspl/rom upgrade/tips&tricks
Cheers
Tom
hello. I exactly have the same problem like the thread poster. my mini usb only charges and cant connect data to any pc. its probably broken as common with using the O2 artemis on a car phone charger and starting the car while the phone is still sitted and charging.
MY QUESTION: does "Artemis SD Card Flashing" doesnt require the USPL? since its CID locked?