Related
This seems like a fair price to me. Is it? What hardware issues should I be looking for, common wear/tear's etc?
Thanks guys! This will be a nice (slightly heavier) upgrade from my Blackjack2 and 2125.
superultra said:
This seems like a fair price to me. Is it? What hardware issues should I be looking for, common wear/tear's etc?
Thanks guys! This will be a nice (slightly heavier) upgrade from my Blackjack2 and 2125.
Click to expand...
Click to collapse
There's quite a list of things to look out for. Be aware that there are quite a few being dumped on the net because of pretty serious issues. Having said that, there are good ones around.
You should not buy one that:
1
has ever had a white screen or fading screen problem
2
Shows a "No GSM" error
3
has a screen alignment issue (even a minor one)
4
has a slide out keyboard so loose that holding it up to your ear makes it slide out a little (this fault is fixable - but not entirely straightforward)
5
switches completely off from time to time (may be a minor battery contacts fault, but can be cracked solder joints on the battery connector.)
6
has ever suffered from applications closing for no reason or the start menu opening for no reason. (can be a sign of alignment issues or contamination under the screen bezel)
7
ever had charging problems or other issues with the USB socket. This can be replaced but the cost is probably not worth it unless it's DIY
8
a loose stylus is a hassle. Some are so loose they just fall out. I have instructions to fix this but easier to avoid the issue.
Im sure other folk can think of a few other things.
It may be worth buying one that is cheap if the rear speaker or front speaker is not working. The rear speaker is of just a loose connector and is just under the rear casing. The front earpiece speaker can be faulty due to loose spring connector (fixable, but a major dismantle - it can be replaced if necessary with a relatively cheap motorola alternative)
Mike
PS I am not up on current prices. Just the other day someone got one at $120 which was not thought to be a bargain. However with the Hermes, I'd rather pay a few more dollars for one that works ok rather than one that has one of those white screen or alignment problems.
That is a great answer. Thanks very much Mike. I'll post here how it turns out.
thats where i found mine, turned out great. this may not seem like the obvious , but one of the main reasons i like craigslist purchases is that they are usually meet face to face affairs. people that are going to scam you by selling you junk are less likely to do so face to face, at least thats been my experience. I think thats price is fair if its in halfway decent shape.
go for it, not a bad price if specs check out like Mike said...
Picked it up, checked for all issues and asked some questions. Seller was mostly tech-illiterate but I dropped her down to $80.
Thanks so much for the advice all. I'll off to upgrade this puppy!
Excellent! Happy Flashing
So I just received my X1a Xperia in North America from expansys.ca
I have to say it's not what I thought it was going to be for $1,000 dollars.
As soon as I got it, noticed the battery and the charger were removed from their bags.
The actual LCD (viewable LCD display) is slanted on the one side... (The gap between the straight peice of plastc horizontally and the viewable section of the screen is greater on the right side than the left... Kinda miffed about this, it's small but Im neurotic and notice these things...)
The back cover of the phone (not the battery cover) was higher and sharp, and not level wiht the battery covery. After closer inspection, I pushed on it, and it snapped into place (it wasn't fully snapped on during manufactoring I guess).
The Camera button doesn't feel secure, and the optic pad for scrolling is very loose and I'm wondering if it is going to fall off...
THANKFULLY the unit has no cracks, hahaha. Kinda also miffed about the sliding. I'm getting scared how easy it is to pull and have the top seperate from the bottom....
Anyone else have any of these issues? For 1,000 bucks I was expecting a bit more. I thought it may have been a re-pack from expansys, but the factory screen protect was on waiting to be pealed off, and when I started the phone it started the initial WM config stuff.
Is there any way to find out how long the phone has been powered on?
why are you buy an X1a for 1 Grand? That's ridiculous.
why not return it, and get it from buy.com for $720 i think you can even get it at sonystyle.com for $799.
I got my x1a from buy.com and had no problems.
Well
Well, it is possible to check in the registry how many power cycles the phone has had. However, this is only accurate if the firmware has not been reflashed since. I think (but not sure) that even a hard reset will reset this effectively rendering this method practically useless. I have noticed it when looking through with SkTools.
The fact the screen protector is on means nothing about the phone being factory, the screen or covering could easily have been replaced if it's a reconditioned.
This sounds nothing like the real build quality of the Xperia. I'm a perfectionist myself and would notice these problems. My touchpad/scrollpad is perfectly secure, the slide is tight, screen is perfectly aligned, and I mean perfectly. The camera button should have no more than half a millimetre play from front to back when looking at the screen, and none in any other direction, even with a lot of use that is the current condition of mine.
Sounds to me like your phone has been rebuilt or you've been very very unlucky.
That being said, expect the keyboard to become a problem after a couple of weeks, but otherwise it's an amazing phone.
Too bad.
I bought mine 3 weeks ago for less than $550 brand new @ Finland.
Optic pad seems loose on my xperia too.
As for the price. The X1a are more pricey than the X1i due.
I needed the X1a to make sure HSDPA works in North America... I don't really care about the price anyways, I shopped around for an X1a and I trust (or atleast trusted Expansys).
I sent an e-mail off to Expansys to find out if it was B-stock or a repack, I'm waiting to hear from them.
I'm wondering if the battery and the charger were removed from their sealed plastic bags because they needed to test them in another device or something...
The only REAL big piss off is the screen... Even though it's a small issue, the blank gap between end of the display and the plastic peice where the buttons start, the right side is 1/16ths of an inch bigger on the right side, compared to the left side. I'm just wondering if a component of the screen is damaged or misaligned... I don't want it to start bending after a while.
I'm concerned about the warranty too as I'm in Canada. I have 15 days to send it back (at my own expense), I'm not to sure if Sony would warranty a product they don't sell in my country...
Start the return process right away. There's no reason for you to keep that phone with the condition you received it in.
Zhariak said:
THANKFULLY the unit has no cracks, hahaha.
Click to expand...
Click to collapse
Well, not YET. Mine got cracks at the stylus hole when I had it for 4 to 6 weeks. Good luck and you should really return it before it is too late =P
Ok, soo quick question...
Ive had 10+ windows mobile devices in my life. Everytime I turn them on for the first time (brand new), it ALWAYS asks you to align the touchscreen.....
The Xperia booted up and had confiuration questions, but what's odd is that it didn't ask me to align the touchscreen....
Does anyone know if the X1a prompted them to align the touchscreen when they first unboxed and powered it up?
Also, anyone know the registry key for turn on and offs?
Yes it should ask you to align the touch screen for the first time. Does the phone look like it's been used??? Just return it...I think Rogers is releasing the X1 for $299 w/ 3 year contract...no?
I bought my X1i for $400 brand new
1k?
rofl ... i paid 100€
u can get it here for 350€ new.
wanna buy mine? 800 Bucks
Wow, so I'm an idiot. It has been powered on...
I wasn't promtped for a touchscreen alignment, AND looking at Call history, 333 was dialed once a few days ago, and 222 has been dialed twice a few days ago. All calls lasted for 30 seconds to 2 minutes...
Anyone know what 333 or 222 could be?
By the way, I want to thank everyone for their help... These forums r0x0r! haha
Anyone know howto reset the phone (all my exchange information is entered), I'm returning it for a new unit...
Just press the two silver keys and simultaneously/after that the Key hidden by the stylus [easily pull out the stylus and put it into the hole in order to press the soft-reset button] ...
Or you turn on youzr device, go to Settings/System/Clear Storage ... enter '1234' and press 'OK'
Kind Regards N0r0
To hard reset:
Hold the two silver keys (under the screen) then press the power button slightly (no more than a second!).
Zhariak said:
As for the price. The X1a are more pricey than the X1i due.
Click to expand...
Click to collapse
True, but even at a US Sony Style store the price is $799 US, or $920 CAD. And it can be purchased at other stores new in box for less than that.
As for the warranty, for the X1, Sony will honor the warranty anywhere in the world if you can provide a valid receipt. I called before purchasing my X1i for here in the states.
What's with the hater congregation here? If you don't like it, go sell it and be done with it. No need to spam....
jhendra said:
Yes it should ask you to align the touch screen for the first time. Does the phone look like it's been used??? Just return it...I think Rogers is releasing the X1 for $299 w/ 3 year contract...no?
I bought my X1i for $400 brand new
Click to expand...
Click to collapse
nice , mine was used for 360
1 grand is just a FRAUD
Well, that comment about Sony providing warranty service anywhere in the world with a valid receipt is awesome!
I remember once I had to get warranty work done on my Motorola MPX220, and they just wouldn't do it even though it was brand new, hahaha...
I ordered another one, and FedEx is picking up the problem one tomorrow morning.
Super stoked to have another "unboxing" haha. Return department at Expansys even said they would check the stock before shipping to make sure it doesn't have any damage to the box and stuff
sounds like you got ripped off bro
I recently lost my stylus, at a park I think. I put the pen in my pocket instead of putting it back in my phone. That was a dumb mistake
Does anyone have a suggestion on where to buy a replacement stylus from?
Seems the price can range from 5 for $8($1.60 per Stylus) to 3 for $20($6.70 per Stylus). Is there any advantage to buying the more expensive ones or are the cheap ones just as good?
I couldn't find a thread that addressed this issue, if I missed it a re-direct would be appreciated
I've bought my replacements for my tilt at eforcity
http://www.eforcity.com/metal-stylu...-ii-chtc4550st02.html?int=efsechtxtrigos-item
they do a lot of business on ebay and carry a whole range of other stuff too. They also give you a $5 coupon for your next purchase for giving a review on reseller ratings
but there are many other sellers out there, i've seen no difference in the quality of the stylus, though I did have problems with a Nintendo DS stylus I bought from a Chinese vendor once. but then again 90% of this kind of stuff comes from china.
I am also in need of a replacement stylus, i lost my original one, the replacement i purchased seems to have a rougher tip than the original, i'm afraid it will scratch the screen.
I've seen them before in a Best Buy store, look around the phone accessories, or, if all else fails, ask someone.
Thanks for the replies.
I ordered some off ebay. 3 for $7. Seem decent enough. Weight a little more than the originals, which I think is a good thing.
All I have to do is hope the pens don't explode now
Looks Like a Good Buy, the only thing you might have to worry about is 1) the ink leaks out into the phone( i don't think the kaiser battery would generate enough heat), 2) losing the cap for the pen since it is the snap of type, can remember where i got mine from , it actually screws off first time i ever tried to use the pen side(lol). just mentioned eforcity since i bought all my cases and stuff from them, guess i didn't buy my stylus from them since they have the same type with the snap off. they sell some strange stuff at notebook.egde, i might pick up the 15 pc screwdriver set for 4.99, gotta replace the buttons on my tilt.
Me too. lost 2 stylus and now after using new finger friendly ROM since few months I dont feel need of stylus.
Unlosable stylus
Instead of getting a "stick" stylus, why not get a object that acts like a stylus? sounds like a funny riddle, but when you own one, the stick styluses do seem funny.
look at the link provided
http://triforce.se/
Have a look on marketplace
some users are selling parts
zyphuris55 said:
Instead of getting a "stick" stylus, why not get a object that acts like a stylus? sounds like a funny riddle, but when you own one, the stick styluses do seem funny.
look at the link provided
http://triforce.se/
Click to expand...
Click to collapse
Cool, thanks for the link!
Does anyone have any experience with swapping the housings between the 2? I am getting the Pure tomorrow but prefer the housing of the Diamond 2 whos full housing is available for purchase. Ive done a ton of swaps, even the iphone, but never between htc rebranded devices... any thoughts?
I'm not sure how well that is gonna work out for you. There are different things between the two of them. First the layout of the buttons. But that may not be a problem. The Unlocked Diamond2 has a front facing camera. So there may be an issue there. The device is curved differently so who knows it the Mini USB port will align right.
I'm sure that no one has done it since the Pure has only been out for a few days and some people that are getting it don't even know of the Touch Diamond2 or that the PURE is a Touch Diamond2. The T-mobile EU version is just like the pure but has a FF camera. So if anyone who has that phone and has done a swap can tell you for sure but I doubt it. There could be slight changes the just throw the entire thing off.
I was just thinking about that. I too prefer D2's design over pure's but I needed 3G. I've done many phone customizations and would definitely undertake this task if it's possible.
I think one of you should try and see if it's possible. There are TD2 Housings for sale on ebay. $20. Worth it if it works.
The $20 one may just be the housing. I asked the seller if its the complet 3-peice housing set. If not there are more for under $40 that show pics of the full set and say its the full set in the description. If you don't trust ebay go here and pay the full price. They have original OEM parts for almost any mobile.
CNN.CN
yeah i found the cnn one and will probobly end up doing that, from the pictures they look like they both have everything in the same places, except the front facing camera will not be there. I wouldnt be suprised if you could add that though during the swap...
76flip said:
yeah i found the cnn one and will probobly end up doing that, from the pictures they look like they both have everything in the same places, except the front facing camera will not be there. I wouldnt be suprised if you could add that though during the swap...
Click to expand...
Click to collapse
Any updates on the housing swap project? Was it do-able?
Just curious.
You will have to replace the digitizer as well. It's impossible to remove without damage. Also, be careful with the ribbon cables. You need to slide the black retainer slightly to remove them...
BTW....P.M. me if you get into it and get stuck or nervous. I have taken mine apart a good 5 times to get the dust out of it.
swap housing (front facing camera)
76flip said:
yeah i found the cnn one and will probobly end up doing that, from the pictures they look like they both have everything in the same places, except the front facing camera will not be there. I wouldnt be suprised if you could add that though during the swap...
Click to expand...
Click to collapse
I have not opened my pure yet but I know past phones that AT&T left the front facing camera off the socket was on the board you just needed the camera itself and plug it in
did anyone try this yet? i really want to do it because the hard plastic gets scratched up really easily and the back cover is starting to look bad.
Ya the Pure is dog ugly compared to the Diamond 2 IMO...I doubt it will be possible though, to do that switch.
mastdesi said:
did anyone try this yet? i really want to do it because the hard plastic gets scratched up really easily and the back cover is starting to look bad.
Click to expand...
Click to collapse
You guys don't read do you?
Look at Tomtommy306's posts.
Good afternoon.
Currently need for a good source to buy a white D801 LCD+Digitizer + Frame from.
Already replaced my screen 2x.
1. due to the Ebay LCD having dead pixels...that source ran out of white screens and refunded the $$. (Gadgetfix)
2. The next screen I got from another source (smart.usa) is even worse with washed out colors and a darker bottom of the screen. Currently debating whether I want to exchange for another one of their screens or abandon these Ebay sellers altogether and find a better OEM source.
Can anyone assist?
OEM Replacement
I just went through this process and went through 5 screens before I found an Amazon seller that had a quality replacement. The screen matches the OEM that I was used to.
I can't post a direct link, as I haven't posted enough. But the seller on Amazon that eventually worked out was Etopaces Inc, fulfillment by Amazon.
Now might be a good time to order, it is about $25-$30 cheaper than when I ordered a week ago from that same listing; frustrating.
HotSauce Pwns said:
I just went through this process and went through 5 screens before I found an Amazon seller that had a quality replacement. The screen matches the OEM that I was used to.
I can't post a direct link, as I haven't posted enough. But the seller on Amazon that eventually worked out was Etopaces Inc, fulfillment by Amazon.
Now might be a good time to order, it is about $25-$30 cheaper than when I ordered a week ago from that same listing; frustrating.
Click to expand...
Click to collapse
Man!!
Thank you.
Don't want to go thru that again.
Read my HTC Sensation posts if you search my name for a good laugh.
Will return the ebay screen and order from Amazon.
Did you get one with the frame?
tiguy99 said:
Man!!
Thank you.
Don't want to go thru that again.
Read my HTC Sensation posts if you search my name for a good laugh.
Will return the ebay screen and order from Amazon.
Did you get one with the frame?
Click to expand...
Click to collapse
Yeah, it was the full assembly, so I was able to plug and play. Just ordered some 2mm double sided tape on eBay to seal everything back up.
Hopefully everything works out, just know that you aren't the only one who ran into issues with screen replacements. I started questioning if there were more issues with my device, but it was just the poor quality screens that were being sent.
HotSauce Pwns said:
Yeah, it was the full assembly, so I was able to plug and play. Just ordered some 2mm double sided tape on eBay to seal everything back up.
Hopefully everything works out, just know that you aren't the only one who ran into issues with screen replacements. I started questioning if there were more issues with my device, but it was just the poor quality screens that were being sent.
Click to expand...
Click to collapse
Thanks again for the heads up.
Promptly removed the defective screen and have packaged it for return
Will update back here with full details once I have a chance to install the Amazon screen.
Just got my new screen from Amazon seller 8090team.
First off the packaging was amazing.
The seller even promised to test the screen himself after hearing my story and rushed the screen to me even faster than the tracking # said.
Paid about 68 including the frame with a few extra for shipping.
Let me be the first to say the screen is better quality vs the 2 ebay ones I had.
My original oem screen on the phone had one the best lcds I've seen in the market and I've seen plenty of first and 2nd gen LG g2s enough to tell the difference.
Will go on record and confirm the Amazon screen is better. If I had to do it again I would have gone this route from the beginning.
I will say the aftermarket screens do not have oliophobic glass like the oem screens do. I noticed this with both the ebay and Amazon screens.
No seller lists this as a feature.
Not a dealbreaker but would love to have the option for it
After using my screen for a couple weeks now I notice :
The viewing angles are not good like OEM.
The head on quality is amazing (looks literally as good as the new Galaxy S6...had then side by side last week) however I wish the viewing angle was just as good as the OEM screen.
Going to decide today if I want to remove this one and exchange it again.
I'm the meantime I may take my original perfect OEM LCD and see if I can use professional tools to remove the digitizer glass and replace just that piece.
I swear it seems like only then will I be happy lol