I want to get a bluetooth headset for my XDA2. Was originally gearing towards the sony-ericsson models but heard there were some bonding problems. So anyone help with some advice on what is the best BT combination
http://forum.xda-developers.com/viewtopic.php?t=3774
i hate the process to connect with my bluetooth headset
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
gives any app to do this with one klick or one button ???
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
What the button?
I have four on my Sonorix :roll:
Only three on Logitech and two of them are volume controls so it's easy
This also doesn't seem to work on my i-Phono Minis, does anyone have a small app that switches this or knows of the API call needed to get the wireless headset to kick on?
Thanks,
Jon.
It's an A2DP issue. Some headphones connect, others do not.
The HP FA303/Logitech headset is one that works. The Moto HT820 is another but has an annoying high frequency distortion. I believe the Jabra BT620 also works correctly but I haven't personally verified this.
My I-Tech S35 BT Headphone adapter
I have to go thru the same process to get a2dp wireless stereo working.
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
I have tried shortcuts using vijays excellent app, but end up getting the wireless headset audio instead of full blown stereo.. there must be a better solution to this..
nolodude said:
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
Click to expand...
Click to collapse
I´m using the I-Tech Blueband
and i think i had see a BT-stark to connect with one button but i don´t find it..
This issue is very likely one of the reasons why A2DP was never officially released.
i think Buzz have write a little tool to do this but it´s hard to find it on the big forum...
Sleuth255 said:
This issue is very likely one of the reasons why A2DP was never officially released.
Click to expand...
Click to collapse
That doesn't make much sense - the reason why they didn't release technology was because it took too many steps to turn on? You wouldn't remove a room from a house just because the contractor put the switch in an inconvient location...
no... the reason it wasn't ever officially released was because of inconsistent device support. Some headphones connect just fine (HP, Logitech, moto) and others don't. Some headsets sound just fine (HP, Logitech) and other's don't (Moto HT820).
Hey guys. I had a moto ht820 (or whatever) and they connected automatically when they were turned on, but crashed frequently when getting calls. Now I have BT620s (jabra) and they work nice However I do have to go and connect them (sux).
So I am posting in hopes that VJ will see this and write a quick connect for the STEREO BT headset like he wrote the other one for Hands Free.
Later; Lew
I'm experience the same problem i have a2dp on my device (mda vario) but everytime i'll have to go to bluetooth, device's, select the headset and set as wireless stereo. isn't there a way to do this automatic?
Becouse it's really bugging me. i have the jabra 620
I have been using for awhile the Moto HS850 and have been able to initiate calls (via voice command), answer calls, etc.
Not too long ago, I went and purchased a H700 (for the noise reduction). For the life of me, I couldn't get the initiate call via VC to work, and it works perfectly with the HS850!
Does anyone have any idea why I would not be able to get the H to work?
Hey guys,
is now a solution out there to connect with one button
the jabra bt620 ??
regards
zehn
My Moto works very well and connect automatic...
a2dp hack
hello guys here is a a2dp hack, just download the cab upload to your device open it fromn your device
soft reset
then discover and add your headphones(stereo)
right click and select set as wireless stereo....
uploaded to htc p4350 worked perfect for headphones plantronics stereo bluetooth
doesnt work
check this page
http://www.teksoftco.com/index.php?section=freeware
here is a2dp toggle
Hi,
Just a quick question. My Moto HT 820 also works both playing music and working as head set. Unfortunately it's mono .
For the tests I've set the wizard to connect to Moto only as wireless stereo but
it keeps playing mono
Is that my issue or general ?
I run MX6r3
cheers
Hi all,
I use a THB carkit integrated into my stereo. It uses usb connector to power the pda but bluetooth to trick the pda into thinking a headset is in use so calls are handled by the carkit. Aside the problem of bluetooth intermittantly turning off, is there a way to forward all audio (especially tomtom) to the "headset" carkit?
I've searched the forum and there is plenty of info on bluetooth headsets and how the button on them can be used to start audio via bluetooth, but the carkit doesn't use any buttons. I would be happy enough if there is an app to run whenever I want audio over bluetooth, anything really to sort this out.
Cheers all.
Anybody have any suggestions pleeease?
well sounds like your in a tight spot. I believe that all the audio programs use the button to initiate the audio transfer. Perhaps if you look at the reg edits for these programs you might be able to toggle it with some other input from the phone.....
There is a free program called BTAudio that you could try
tried that program but it relies on pressing the voicedial button on a headset which I don't have.
I am having trouble getting my HTC Mogul to connect with car stereo by bluetooth for hands free talking. The stereo I have (http://www.pioneerelectronics.com/pna/v3/pg/product/details/0,,2076_310069882_291159553,00.html ) allows bluetooth enabled phones to connect to it and use handsfree over the car speakers. I had it successfully working with every other phone i've owned however i can't seem to get my mogul to pair with it. Any suggestions? I've tried enabling the bluetooth on stereo to "discoverable" and had my phone attempt to connect but it won't work. I've also made my phone "discoverable" and tried to have the stereo initiate the connection and still no luck.
Any help would be greatly appreciated.
Thanks
My question is about various bluetooth profiles. I use Plantronics stereo headset, which pairs and works wonderfully with the G-Tab from VZW. My one complaint is that this device, which is not to be used as a phone, pairs with the hands-free option, preventing me from simultaneously pairing with my (real) phone as hands-free and my G-Tab as a headset.
I used to do this when I had a Samsung YP-P3 multimedia device. When a phone call came through, the hands-free would override the headset and allow me to smoothly switch between phone and headset application.
Now the G-Tab either pairs with the headset completely or not at all.
Ideas? Is the question clear?
delovelady said:
My question is about various bluetooth profiles. I use Plantronics stereo headset, which pairs and works wonderfully with the G-Tab from VZW. My one complaint is that this device, which is not to be used as a phone, pairs with the hands-free option, preventing me from simultaneously pairing with my (real) phone as hands-free and my G-Tab as a headset.
I used to do this when I had a Samsung YP-P3 multimedia device. When a phone call came through, the hands-free would override the headset and allow me to smoothly switch between phone and headset application.
Now the G-Tab either pairs with the headset completely or not at all.
Ideas? Is the question clear?
Click to expand...
Click to collapse
When you tap and hold on the bluetooth entry for the YP-P3, does it bring you to a menu where you can de-select hands free?
rotohammer said:
When you tap and hold on the bluetooth entry for the YP-P3, does it bring you to a menu where you can de-select hands free?
Click to expand...
Click to collapse
You know, my experience with XDA-Developers has always been positive (to the extreme) and this is no exception! Thank you!
Full path:
Home / Settings / Bluetooth settings / tap&hold 590Plantronics / Options / Select Media, deselect Phone
Thank you so much. Gonna try out that new Thanks button on XDA now!