Related
i hate the process to connect with my bluetooth headset
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
gives any app to do this with one klick or one button ???
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
What the button?
I have four on my Sonorix :roll:
Only three on Logitech and two of them are volume controls so it's easy
This also doesn't seem to work on my i-Phono Minis, does anyone have a small app that switches this or knows of the API call needed to get the wireless headset to kick on?
Thanks,
Jon.
It's an A2DP issue. Some headphones connect, others do not.
The HP FA303/Logitech headset is one that works. The Moto HT820 is another but has an annoying high frequency distortion. I believe the Jabra BT620 also works correctly but I haven't personally verified this.
My I-Tech S35 BT Headphone adapter
I have to go thru the same process to get a2dp wireless stereo working.
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
I have tried shortcuts using vijays excellent app, but end up getting the wireless headset audio instead of full blown stereo.. there must be a better solution to this..
nolodude said:
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
Click to expand...
Click to collapse
I´m using the I-Tech Blueband
and i think i had see a BT-stark to connect with one button but i don´t find it..
This issue is very likely one of the reasons why A2DP was never officially released.
i think Buzz have write a little tool to do this but it´s hard to find it on the big forum...
Sleuth255 said:
This issue is very likely one of the reasons why A2DP was never officially released.
Click to expand...
Click to collapse
That doesn't make much sense - the reason why they didn't release technology was because it took too many steps to turn on? You wouldn't remove a room from a house just because the contractor put the switch in an inconvient location...
no... the reason it wasn't ever officially released was because of inconsistent device support. Some headphones connect just fine (HP, Logitech, moto) and others don't. Some headsets sound just fine (HP, Logitech) and other's don't (Moto HT820).
Hey guys. I had a moto ht820 (or whatever) and they connected automatically when they were turned on, but crashed frequently when getting calls. Now I have BT620s (jabra) and they work nice However I do have to go and connect them (sux).
So I am posting in hopes that VJ will see this and write a quick connect for the STEREO BT headset like he wrote the other one for Hands Free.
Later; Lew
I'm experience the same problem i have a2dp on my device (mda vario) but everytime i'll have to go to bluetooth, device's, select the headset and set as wireless stereo. isn't there a way to do this automatic?
Becouse it's really bugging me. i have the jabra 620
I have been using for awhile the Moto HS850 and have been able to initiate calls (via voice command), answer calls, etc.
Not too long ago, I went and purchased a H700 (for the noise reduction). For the life of me, I couldn't get the initiate call via VC to work, and it works perfectly with the HS850!
Does anyone have any idea why I would not be able to get the H to work?
Hey guys,
is now a solution out there to connect with one button
the jabra bt620 ??
regards
zehn
My Moto works very well and connect automatic...
a2dp hack
hello guys here is a a2dp hack, just download the cab upload to your device open it fromn your device
soft reset
then discover and add your headphones(stereo)
right click and select set as wireless stereo....
uploaded to htc p4350 worked perfect for headphones plantronics stereo bluetooth
doesnt work
check this page
http://www.teksoftco.com/index.php?section=freeware
here is a2dp toggle
Hi,
Just a quick question. My Moto HT 820 also works both playing music and working as head set. Unfortunately it's mono .
For the tests I've set the wizard to connect to Moto only as wireless stereo but
it keeps playing mono
Is that my issue or general ?
I run MX6r3
cheers
I've got a BT stereo headset (HTC S100) and also BT in my car (Ford). I'm not trying to use them simultaneously (no point), I just want the headset to work properly when I'm using that and then when I get in my car I want the Tytn to connect to my car BT and to work properly with that. At the moment if I want to use my headset I have to go into BT settings and untick "Handsfree" for the car BT device and soft-reset, then I have to do some tinkering on the headset and make a phonecall before it will kick in and behave. Then when I want to use it in my car I have to DELETE the headset from my BT devices (unticking the boxes is not enough), check the "Handsfree" option under the Ford BT device and then soft-reset before it will work.
Why the hell can't the phone just use the headset properly when that's on and connected and then when I'm in the car use the Ford BT properly? Why does having two devices configured interfere with eachother when they're not actually being used simultaneously?!! It's ridiculous, I reckon it's the MS BT stack, what a load of $hite!
Any ideas what I can do? I've tried the JETware handsfree extension, has made no difference.
I have the following problem when connecting the HD2 with bluetooth to my car stereo:
The car stereo is capable of BT-phone (Hands-free) as well as BT-audio (Stereo Audio) connection. The connections are made automatically (connections are set and authorized) indicated with two different symbols indicating each connection.
The following occurs:
A. When connecting the HD2 for the FIRST time to this stereo, both BT-phone and BT-audio do connect automatically. This can be monitored by the two symbols on the car stereo, and also in the bluetooth connection monitor on HD2.. both Stereo Audio and Hands-free are connected, indicated by the green arrows.
B. When connecting the HD2 again (so anytime but first time), ONLY BT-phone does connect automatically!
The BT-audio connection I can connect when I need to, but this can be done only manually in the bluetooth settings on the HD2 by ticking the Stereo Audio entry.
In case B it makes no change if I check or uncheck the "Connect seperately to Bluetooth hands-free and stereo audio services" checkbox in the connection properties on the HD2. Makes no difference.
Also, a normal stereo bluetooth headset connects both BT-phone and BT-audio at all times,
So for the car I would like to also have Stereo Audio connect automatically too (like Hands-free). For the HD2 I have tried several ROMs and several soft/hard resets to make sure it is a problem which always occurs..
Why does the car stereo only connect both services the first time the connection is made, and afterwards only the phone handsfree service?
htc12345 said:
I have the following problem when connecting the HD2 with bluetooth to my car stereo:
The car stereo is capable of BT-phone (Hands-free) as well as BT-audio (Stereo Audio) connection. The connections are made automatically (connections are set and authorized) indicated with two different symbols indicating each connection.
The following occurs:
A. When connecting the HD2 for the FIRST time to this stereo, both BT-phone and BT-audio do connect automatically. This can be monitored by the two symbols on the car stereo, and also in the bluetooth connection monitor on HD2.. both Stereo Audio and Hands-free are connected, indicated by the green arrows.
B. When connecting the HD2 again (so anytime but first time), ONLY BT-phone does connect automatically!
The BT-audio connection I can connect when I need to, but this can be done only manually in the bluetooth settings on the HD2 by ticking the Stereo Audio entry.
In case B it makes no change if I check or uncheck the "Connect seperately to Bluetooth hands-free and stereo audio services" checkbox in the connection properties on the HD2. Makes no difference.
Also, a normal stereo bluetooth headset connects both BT-phone and BT-audio at all times,
So for the car I would like to also have Stereo Audio connect automatically too (like Hands-free). For the HD2 I have tried several ROMs and several soft/hard resets to make sure it is a problem which always occurs..
Why does the car stereo only connect both services the first time the connection is made, and afterwards only the phone handsfree service?
Click to expand...
Click to collapse
i have exactly the same problem! any suggestions on this would be appreciated
+1
using fiscon mobile.
at the same time i have quality issues (no bass or low sampling rate). but i guess this is a fiscon problem? it was the same with my previous i-phone.
Audio quality is fine here. Is the connection issue a Windows Mobile bug?
htc12345 said:
Audio quality is fine here. Is the connection issue a Windows Mobile bug?
Click to expand...
Click to collapse
on a fiscon? are you using a fiscon as well?
I don't know if this is helpful, however I have an IO Play system in my car and it connects automatically everytime for both handsfree and audio streaming.
Works fine for me with my Lidl (!) Silvercrest car stereo. But for me the HD2 has to be playing audio/music for the Bluetooth streaming to work.
FYI - my car stereo is an Eclipse 3200
Have the same issue with A2DP Bluetooth headphones/handsfree.
While the device recognised it as Bluetooth stereo and handsfree and on a first connection both connections are active in device profile, on any other connections only handsfree connects authomatically. And I need to mannually connect stereo in Bluetooth manager :/
Same here :S
Every time i connect my Nokia BT Headphones " Hands free" connects automatically and "Stereo audio" not
I also have exactly the same problem. only BT-Phone connects, not BT-Audio.
I have a Sony headunit. Seen as I guess we all have different headunits in our cars, it must be an issue with the HD2 not the stereo.
archvile77 said:
on a fiscon? are you using a fiscon as well?
Click to expand...
Click to collapse
I have a Sony car stereo.
Same here except in my case I have a cheapy Tevion (Aldi) headunit. This is a real pain in the neck if you stop and turn off the engine of the car because then I have to reconnect BT Audio again
Correct me if I'm wrong, but I think this also happens with A2DP stereo headsets with combined audio+HF.. Don't know why though..
Had this problem with my HTC Diamond, and now with my HD2.. Search for "A2DP Toggle"..
It defintiely happens with some A2DP headsets - I have a Sony headset and it happens on that. You have to manually connect A2DP profile each time.
We need an A2DP toggle for the HD2 Widcomm stack ...
Mark
I have a Sony headset which connects both BT Audio and BT Phone together, and a Sony Car stereo which connects only BT Phone.
I have the exact same issue with my JVC car head unit, should be able to connect to use as hands-free and stream music, but neither will retain a connection. I can't connect and pair the devices with the '000' (or whatever I choose) BT pairing code. My previous mobile worked perfectly and auto-connected as it should every time.
I submitted it as a support request on HTC (UK) site, here is my response:
Thank you for your enquiry.
The Bluetooth accessory you have mentioned may not be fully compatible with the HTC handset so may have limited features to be used with the device. For example you maybe able to pair it but other faults may occur. Please keep an eye on our website for any future updates such as Bluetooth patches and ROM upgrades. We cannot confirm if and when these may or may not become available.
As a test, you maybe able to delete all Bluetooth partnerships/devices from your handset and start the pairing process again.
Is it working now?
As an alternative solution please see compatible and recommended Bluetooth accessories in the Buy section of our website below:
(Link to 'HD2 Bluetooth Accessories' page of their website)
Please let us know how you get on and we will assist you further if and when required as a matter of urgency.
Best regards,
Mat
HTC
Click to expand...
Click to collapse
Not the response I wanted, and when I have followed up on this reply I got the same copy/pasted text response! Upon following up on that reply I think they gave up on me as I haven't got a reply this time!
Basically, they want me to go out and spend another couple of hundred £ on more equipment to achieve my hands-free (without an earpiece) requirement, even though I already have the equipment but can't make it connect!!
nniicckkss said:
Not the response I wanted, and when I have followed up on this reply I got the same copy/pasted text response! Upon following up on that reply I think they gave up on me as I haven't got a reply this time!
Basically, they want me to go out and spend another couple of hundred £ on more equipment to achieve my hands-free (without an earpiece) requirement, even though I already have the equipment but can't make it connect!!
Click to expand...
Click to collapse
HTC is getting better and better at standard responses. However there are also helpful and knowledgeable people on the other side of the communication line.
Approved bluetooth says nothing, as if they will try to test every bluetooth device in the world, even sold prior to the birth of the HD2... right.
However the problem is perhaps more WinMo related and not only HD2. But I have only the HD2 to test with..
AND WHILE WRITING... I see that also sony stereo headset is connected as BT Phone... guess we need a small tool to connect bluetooth easily.
I think its a combination of the software in the Bluetooth device and the host. My Sony headset would also require manual A2DP connection with my previous phone - an Eten. As others have posted here other Sony headsets will pair with the HD2 automatically for A2DP.
Mark
I can also confirm this "bug". Can't get my A2DP device (BCK-08) to connect (itself) as BT Stereo. Everytime reconnects automatically in HF mode. That really sucks.
Olioaglio
Trying to pair my HD2 with my Pioneer DEH-P710BT and neither device will recognize the other after numerous attempts to follow each of the owner's manuals. Both have Bluetooth switched on and are discoverable and this just worked with my old iPhone on the first try. Is there a trick to this or something I'm missing? Anyone been successful pairing an HD2 to a Pioneer headunit? Thanks!
I have a sony xplod and it works fine with my HD2. You want to put your stereo into pairing mode and search for it with your phone, like you would with a bt headset.
I have the exact same model and I've experienced endless frustration trying to get it to work seamlessly with the HD2. My Blackberry has no issues with the connection to the DEH-710BT radio. There seems to be an issue with the devices establishing a connection, however when they do finally connect it stays reliable for as long as the radio is on.
Going through the Bluetooth settings in the HTC Sense menu often causes the connections to be reset and not work without a number of repairing attempts. Eventually it will work, but its taken me up to 10 minutes to get A2DP and the headset profile to work together.
There are some posts about people having issues with other car stereos and registry settings that are supposed to help. I've tried the registry settings without success in having the devices fully automatically connect.
After playing with the devices for a while, I've gotten it so that the devices 100% of the time automatically connect with the headset profile, however I cannot get them to automatically connect with the A2DP profile. The reliable work-around I've found is after I start my car, I go to Start->Settings->Bluetooth and then click on Stereo Audio under the Pioneer Device. While a bit of a pain, it isn't nearly as bad as trying to use the HTC Sense menu.
Dave
speoples20: You're exactly right, my headunit would not find the HD2 but the HD2 found the headunit (took me 5 tries before I got a successful pairing). Thanks!
dmattox: Thanks for the heads up about the A2DP situation, I don't have music loaded on the device yet since I use thumb drives but I'll have to try it out and report back if I have better luck. It is cool that the A2DP feature is there, I don't believe this was supported on the iPhone.
I currently run a Pioneer AVIC-D3 using the Pioneer CD-BTB200 bluetooth module.
I have no issues with connecting my HD2 (and previously my Touch Pro2) to my head unit for both voice and bluetooth stereo.
ruinertt said:
I currently run a Pioneer AVIC-D3 using the Pioneer CD-BTB200 bluetooth module.
I have no issues with connecting my HD2 (and previously my Touch Pro2) to my head unit for both voice and bluetooth stereo.
Click to expand...
Click to collapse
I have the AVIC Z110BT on my car and I connect the HD2 fine. I do have to do it from the HD2 and not the AVIC unit as opposed to when I had my iphone, but my HD2 connects flawlessly and I can use BT for Audio without any skip. My iphone used to skip every 30 seconds when I played it with the BT Audio connection. I have Energy Rom on my phone, but it worked all the same when I had stock rom as well.
Hi guys!
So, the Xperia support A2DP just fine, also in combination with my car stereo (a Pioneer Avic D3BT set). However, I find that when I start playing audio (doesn't matter if this is music or satnav guidance) before I start the car (and hence the stereo set), not only will the audio not be re-routed to the stereo, but the phone also fails to connect with the A2DP part. Phone audio (headset profile) is connected OK, though.
Is this normal behaviour/has anyone seen the same behaviour?
Oh, and if anyone has a way of transferring contact to the phonebook of the car, I'd be delighted to hear about it. For me, it will immediately disconnect if I even attempt to transfer a phonebook item.
Hey Stampot. I have a Pioneer BROWSE system(BTB200) and I have the same problem. I find if I activate the phone bt after the car is on, A2DP connects fine. But if I do it the other way around,I only get phone audio. To fix I either have to disable/enable the phone bt or (the faster way) toggle the a2dp option. I'm hoping a de/firmware upgrades fixes the prob.
-------------------------------------
Sent via the XDA Tapatalk App
Its works better when u start the car first and that should not be a problem, shouldn't????
Its the same with every Bluetooth Headset. U can do it with the other way, but u must choose the Audioconnection in the Bluetoothsettings manually.