is it possible? want to flash to original rom and send to HTC centre..
Search for some info about SD flashing in wiki. To copy files without ActiveSync use WM5torage.
Related
I installed the XDA developers ROM flawless, but the GRPS browsing deosn't work, and I need it. I want to go back to the original ROM, or other original QTEK ROM, but when I run the installer it stops after "waiting 10 seconds.." I tried 2 different ROMS I've found inthe forum, the UK [email protected] 3.17... and the 3.16...
How can I go back? Is it possible? Please developers help me
Thanks
yes, it's no problem to flash (downgrade?) it to O2 3.xx,
I am not very sure what happened in ur XDA, but I suggest try to use Image Tool to burn the O2 rom.
what's the image tool?
Is it different from the installer I tried?
OK, here is the reason:
B coz the rom which from xda-developers is base on qtek rom, so the id of ur XDA has been changed to qtek's id, once u want to install the rom from O2, the upgrade program found a different id and refuse to upgrade it.
u can:
use Image tool to write the ROM from O2
or
run adaptRom.exe in ur pc to update the ROM from O2, and then u can 'install' it from ur pc to XDA
how exactly I use the ADAPTROM?
I run it from the pc and nothing happenned. (A dos window opened and closed immediately) In which directory should I run it? Or is it from the mobile device through the pc? Please explain me.
The other thing is that I didn't understand correctly the process with the ROM image tool. I copied the ROM from the QTEK to the SD, and then I wrote in the SD the upgrade. Now the pc doesn't recognize de SD, I can't even format it and I'm too afraid to put it back in the XDA.
ANy ideas what should I do? I even tried Isobuster but it didn't read it.
Esteban
Copy adaptROM.exe to same direcory as installer (under "Program Files", called "RUU", "Programme A" or somthing similar.
Go to this directory using the command prompt, and then run adaptROM in that directory.
Run "Programme A", it will not complain anymore...
We're working to make this easier...
i am facing the same problem
hello dear xda-develpoers .... i have the same problem but i have the qtek and i flashed it with the new o2 rom with the xda-developers 1.1 but i cant go back to my orgeinal qtek rom ..i have triyed copying the adaptROM.exe to same direcory as installer (under "Program Files", called "RUU" then i have tryied to flash the rom but nothing changes can u please help me....thanks very much
I hope you also ran adaptROM, and not just copied it. First run adaptROM, then "Programma A"...
hi,
thanks to the support on this site i was able to unlock my o2 xda. the new rom of your special xda-rom was installed. as it is only in english i would like to have a german rom again..... downloading and installing the o2 or t-mobile updates always failed. the rom-image wasn't found or the active sync-connection failed.... is there a german tool available?
cook 4.00.33 or 4.01.19 based ROM in the kitchen and use the SD method
o2 rom german
thx for your quick help. downloaded rom kitchen yesterday. but there is no executable file resp. can't find my handheld in the winzip unzip-folders.... furthermore i am a beginners and did not really understand how to use the sd-card. if i try to install the progamme a from o2 i always get default "rom image not compatible" or even "can't establish active snyc connection" (even if xda is connected and syncronized the other data correctly.
I think your choices are either to get used to the English OS, or to look around a bit more on this site to learn the SD-method.
I would personally opt for the first choice, but being from Sweden I really don't have a choice. There isn't such a beast as a Swedish WM 2003 for the xda :-(
SD method is quite easy .. cook ur ROM as .nbf file ... copy this file to the SD card using the xda with XDAtools or a SD reader/writer .. insert the card in ur xda and goto the boot loader screen .. it will automatically flash ur ROM
can i update my xda rom from o2 to win 2003? where do i find such utility?
Point your webbrowser to http://xda.weblink.net/ This is the fabulous ROM Kitchen of Makis and LumpiStefan.
Click on "Windows Mobile 2003" and select which tools you want to include in the ROM and choose a bootscreen.
Build your ROM as an EXE file and download it when ready.
The status is shown on top.
When the EXE is downloaded, remove the SD card and put your XDA in the cradle and run the EXE. Follow the instructions on screen and you have an XDA with Windows Mobile 2003 (WM2003).
Please note:
When upgraded you have to install all your software again and re-enter your Contacts and Calender entries.
Point your webbrowser to http://xda.weblink.net/ This is the fabulous ROM Kitchen of Makis and LumpiStefan.
Click on "Windows Mobile 2003" and select which tools you want to include in the ROM and choose a bootscreen.
Build your ROM as an EXE file and download it when ready.
The status is shown on top.
When the EXE is downloaded, remove the SD card and put your XDA in the cradle and run the EXE. Follow the instructions on screen and you have an XDA with Windows Mobile 2003 (WM2003).
Please note:
When upgraded you have to install all your software again and re-enter your Contacts and Calender entries.
will i be able to unlock
thanks for your help on the rom kitchen? I have a few questions:
1. At the moment I have developers SER in my XDA 1 and it is unlocked, after I upgrade it to TMobile 4.01.16 will it still be unlocked?
2. If it will be locked again on upgrade to WM 2003 what would be the procedure to unlock it over 2003 without a cable?
Thanks
Ghaffar
It will be still unlocked after the upgrade.....
So no problem with this.....
HTH
Stefan
Reverting back to Pocket PC 2002 SER
Thanks for the quick reply. Would it be possible to revert back to SER on Pocket PC 2002 after an upgrade to WM 2003?
Regards,
Ghaffar.
You can always revert to SER 1.2.
But it could be difficult, cause some some roms only allow installing a new ROM via SD-Card.
Try reading a little bit in the forum....
Stefan
It is possible to go back from WM2003.
I have done it the SD way.
First of all download the XDATools from this site.
Use the XDA OS Image tool to make a backup of your current OS.
Then use SD Backup on your XDA to make a backup of your "Working set" of applications and settings.
You now have a complete backup of your XDA.
I used a cardreader to make a Windows Backup of the SD Card.
Remove the SD from the XDA and perform an upgrade with your own cooked ROM from LumpiStefan.
In my case I could not downgrade using the SER1.2 via the cradle. I had to use the SD methode. Fortunately I had my backup of PocketPC2002, so I was able to flash back to my original XDA OS.
how can I re-install the htc HD2.
I can't use the general method.
I mean the HD2 now is unworkable.
HTC sense can't work.
I can't open software
anythings that not work!!!!!!!!!!!!
Please be more specific as to what the problem is.
(1) Are you on stock ROM or custom ROM ?
(2) Did you do HSPL ?
(3) Is it not working after a flash of custom ROM or everything was ok and suddenly now its not working ?
(4) And 'what' is not working ?
I reallly don't know what happen.
When I turn on the pc, anythings not work
it will not show all the application.
yet it will show all the application when i restart the pc.
I cant run the application.
Can I re-install the rom. The pc now can't connect the computer. USB is also not work.
Do you know the chinese???
hope this will help you.
copy your stock rom to memory card. then use flashing using SD Card method.
your stock rom should be LEOIMG.nbh
Thanks for all your help!
The problem now is solved.
Hi there i am hoping somebody can help i have found alot of threads explaining the issue with htc hd2 white screen error but have not found a solution to help i have tried for days to load stock roms original telstra roms tried hspl3 i can not connect through windows mobile with usb and have tried flashing original roms via 4g sd card with no luck am i missing something i have tried RUU_Leo_Telstra_WWE_1.49.841.1_Radio_Signed_15.28.50.07U_2.05.51.11_Ship RUU_Leo_Telstra_WWE_1.72.841.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship i have tried to run through adminstrator i can not access the phone settings to turn on active sync so as far as i am aware i can not do anything through usb. i get an error msg when flashing via card and it terminates the update. Can anyone help with this issue i know there are many threads none have helped me.
Thankyou in advance
There are several possible reasons that the flashing process fails. Or, as it seems, the connection from your device to the PC - which might be a driver issue.
Normally, HD2 turns on ActiveSync if you want (you can select when a popup screen offers this) as soon as the device is connected to a PC through USB.
If the flashing process doesn´t run via SD card, there are also various possible reasons: Sometimes, cards bigger than 2GB don´t work, or your card is not formatted FAT32, or the naming of the ROM file is incorrect (should be leoimg.nbh). Or, your device is not a Telstra device after all?
Anyway, in order to help, there is more information from your side needed, otherwise, it´s a bit like searching a needle in a haystack.
Like tictac0566 said
Try 2gb sdcard - make sure its fat32 formated.
Make sure battery its not under 50%.
Most important Make sure the rom your are trying to flash its for your hd2 ( best way its to download from htc - web support with serial number ).
sd installation
i down loaded the rom. the oiginal rom is in exe extention. how do i used it to install from sd card. i gotthe rom from tmobile with serial number? where can i downlead the seperate rom file.. any link for .nbh file
The exe is actually an executable zip file. Rename it to. .zip from .exe and you can then open it with winzip or winrar or whatever,and inside you will find several files,one of which is ruu_signed.nbh which you extract and rename leoimg.nbh and flash with.
steps to flash through sd card.
i tried 3 stock roms even from tmobile web site. it gave me a radio error and terminate. what can i do it just wont install radio..???