It's a no go. I've tried 3 different times today and each time it has resulted in a HARD reset. Completely wiping my Mogul.
Has anyone had success??
ROM Version 3.56.651.0
Radio 3.42.02
I'm no longer on the official Sprint ROM, but when I was, HTC Home was working just fine. Are you running it with HTC Home Customizer (HHC)?
I had the same problem when I upgraded to WM6.1. To resolve it, I reinstalled the HHC (HTC Home Customizer) first and then through it, downloaded the latest version of HTC Home Plug-in directly onto the phone. Works fine now. Good luck.
I just checked and the new version of HTC Home is specific for WM6.1 The version 2.1 caused all sorts of havoc with mine when I tried it on WM6.1
TO be honest...I'm not sure what I've done...but I have it all working now.
Related
hey guys i've upgraded to Helmi Windows Mobile 6 the first day it came out but as i see right now there is other versions of wm6 , which one is better more stable less bugs and so on ....
Thank You
yup, same question here..
actually my OS is Helmi Windows Mobile 6 Profesional R0 CE OS 5.2.1620 (Build 18125.0.4.2) , and i would like to know if it's better to switch to WM6 Pro CE OS 5.2.1933 (Build 18533.0.7.0) or WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT)
i hope that somebody who tested these 3 version's could help us
thanks in advance
Luis
newkpt said:
yup, same question here..
actually my OS is Helmi Windows Mobile 6 Profesional R0 CE OS 5.2.1620 (Build 18125.0.4.2) , and i would like to know if it's better to switch to WM6 Pro CE OS 5.2.1933 (Build 18533.0.7.0) or WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT)
i hope that somebody who tested these 3 version's could help us
thanks in advance
Luis
Click to expand...
Click to collapse
For those who dont know, PDAViet has just released a new BA rom with thse spec : WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5.
it has built in TouchFlo, and als the latest .NetCF 3.5 as Extrom...
I also have tried all the WM6 version since Helmi R0 release, Xplode's latest rom and PdaViet's WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT).
All are good, stable and fast.
I tried Xplode's latest rom for only 1 day and switched back toPdaViet's cause I had problems:
1. Somehow, the OK button (on top right hand corner) close apps without saving it (I had this problem when using PocketInformant and PocketBreeze - weird. I put it on forum, but no one else seem to have this issue)
2. I feel that the touch screen is not as responsive as other roms -I dont know, maybe I was wrong...but this is what i feel anyway
For now, I am using PdaViet's latest rom WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5.
, and its very good...
hey i hv tested all the three but i hv not found big changes in them and switch back to helmi as i hv the backup of it. all three r same as they r helmi based. so i advised to go for helmi it also has gsfinder as file explorer.
which is the best
I have tried have all three of the latest roms but the ones that are the newest is pdaviets rom with office 6.1 and xplodes. Hemlis wm6 is older than the others so any of the other 2 are better.
It seems that the speed of xplodes and pdaviets are ABOUT the same but i find that pdaviets rom is slightly faster- programs open faster, and there is no stalling. Pdaviets is more stable- when i installed pdaviets 5.2.000 i only soft reset it about once- it works flawlessly. I can open more programs at the same time without stalling and freezing with pdaviets than with xplodes. With a great combination of stability and speed pdaviets takes the cake.
Although i can not use the touch flo cube that comes with pdaviets because of i can not get rid of my older version of touchflo i installed in my BA- for some reason i can not uninstall it or remove it but i hear it works like a charm.
shazzy84 said:
I have tried have all three of the latest roms but the ones that are the newest is pdaviets rom with office 6.1 and xplodes. Hemlis wm6 is older than the others so any of the other 2 are better.
It seems that the speed of xplodes and pdaviets are ABOUT the same but i find that pdaviets rom is slightly faster- programs open faster, and there is no stalling. Pdaviets is more stable- when i installed pdaviets 5.2.000 i only soft reset it about once- it works flawlessly. I can open more programs at the same time without stalling and freezing with pdaviets than with xplodes. With a great combination of stability and speed pdaviets takes the cake.
Although i can not use the touch flo cube that comes with pdaviets because of i can not get rid of my older version of touchflo i installed in my BA- for some reason i can not uninstall it or remove it but i hear it works like a charm.
Click to expand...
Click to collapse
What do you mean you cannot get rid of the older version of touchflo? After reflashing the new rom, whatever you have before will be gone..... just make sure you do the no yes yes option...
And you are rite, touchflo on Pdaviets latest rom works very well...
Just want to say yes, I am using latest rom of PDAViet too, and I love it. All bugs seems fixed. I just don't like the touchflo as I was using HTouch before and it works better (quicker, smoother, no flare, more open to add links...)
ftouch
joseph.sapri said:
What do you mean you cannot get rid of the older version of touchflo? After reflashing the new rom, whatever you have before will be gone..... just make sure you do the no yes yes option...
And you are rite, touchflo on Pdaviets latest rom works very well...
Click to expand...
Click to collapse
I installed a previous version of ftouch before the one in pdaviets came out and i installed it on my hemli wm6 rom when it first came out. I did uninstall the program but although the file was removed touch flo was still active on my BA. No matter how many times i have flashed my BA to another rom ftouch is installed on my BA. It is very weird.
I did however find the ftouch program and it is located in my BA "windows" folder under "startup". When i try to delete that it says thats the file can not be deleted. I am not sure what you are talking about when you say " no yes yes" option because everytime i flash a rom it goes to the align screen option. Any help would be appreciated.
shazzy84 said:
I installed a previous version of ftouch before the one in pdaviets came out and i installed it on my hemli wm6 rom when it first came out. I did uninstall the program but although the file was removed touch flo was still active on my BA. No matter how many times i have flashed my BA to another rom ftouch is installed on my BA. It is very weird.
I did however find the ftouch program and it is located in my BA "windows" folder under "startup". When i try to delete that it says thats the file can not be deleted. I am not sure what you are talking about when you say " no yes yes" option because everytime i flash a rom it goes to the align screen option. Any help would be appreciated.
Click to expand...
Click to collapse
the no yes yes option refers to cleaning up the rom i.e. similar to the concept of formating the whole rom data.... you should do this after reflashing a new rom build.
when you reset and you get to the 3 colored screen, press and hold camera + record button for about 2 sec... use record button to choose, camera button to change no/yes... and then press mail button to confirm...
its all in wiki, under the instruction on how to update rom...
I prefer Xplode's latest release...its the fastest one by far, in my experience...can't really fault it at all....I dont like the Touch Flo...it's too slow on the BA...and I don't find it beneficial at all...just a waste of resources.
joseph.sapri said:
the no yes yes option refers to cleaning up the rom i.e. similar to the concept of formating the whole rom data.... you should do this after reflashing a new rom build.
when you reset and you get to the 3 colored screen, press and hold camera + record button for about 2 sec... use record button to choose, camera button to change no/yes... and then press mail button to confirm...
its all in wiki, under the instruction on how to update rom...
Click to expand...
Click to collapse
excellent! Thanks a lot joseph sapri! I just did it and i have so much more rom space and the ftouch is gone! MUCHO appreciated
no probs. I was in your position before.. . This is what this forum is for...
i see by far more people like PDAViet release
could any one provide download link and is there any thing special we have to do to upgrade from helmi WM6 ?
Thanks
Download links are in corresponding threads - THE FIRST POST usually
You should backup your data before flashing, upgrade procedure is the same as for any WM6.
Here is the link to the rom, as posted by Iced Coffee...
http://www.4shared.com/file/31606851/8e53a788/ROM_BA_Touch_8002.html
Just do normal upgrade procedure....
joseph.sapri said:
Here is the link to the rom, as posted by Iced Coffee...
http://www.4shared.com/file/31606851/8e53a788/ROM_BA_Touch_8002.html
Just do normal upgrade procedure....
Click to expand...
Click to collapse
I just upgraded using this rom, but the sim card cannot be recognized. Any suggestions?
Hello,
I recently have updated my tc to wm 6.1 but after updating i can't see HTC Home anymore. In the today setting I've turned it on en the space is reserved on the screen but there doesn't apear the home screen.
Any suggestions here?
Make a Hard Reset
Thanks for you reply but a hard reset doesn't solve the problem.
Can it have anything to do with the fact that I've replaced the radio yesterday for a cracked version to install the ROM from this forum with touchflo 3D. After installing both the radio and the new rom I've ren into some problemes so I've decided to go back to the original ROM 6.1. But now I can't get HTC Home to work. I only need to switch it on in the Today settings i guess but I can't see it after turning it on. Only the space where it should be is visible.
Are you sure you are using official WM 6.1 ROM and not a cooked one?
Sascha
Yes, I've downloaded it today from http://www.htc.com
mpost112 said:
Yes, I've downloaded it today from http://www.htc.com
Click to expand...
Click to collapse
I have the exact same thing here, so solution found yet.....
Download another version or try to installe the cab to make reappear HTC Home, or check settings/today/items
Anyone a link to a working HTC Home cab file?
Good morning guys. I searched it but I didn't find anything. Is it possible to import Manila (tf3d from HTC diamond) in hp 614c? Thank you
manilla 2d is possible if u have a english rom and it works very well for me.
Can you explain how to do it
Sorry for the stupid question but are you talking about the port of the 2D manila interface, running on HTC 3g? If so, please tell me where in the forum can I download the installation files. Are there any specific issues with the ipaq 614.
http://forum.xda-developers.com/showthread.php?p=2277642#post2277642
You can also try this ROM (WM 6.1):
http://rapidshare.com/files/165082651/614_WM6.1_19971.rar this beta but stable.
password: israpda.com
Manila is in there and works very fast and stable. The same for ROM.
ROM has been cooked by Yevg001 from 4pda:
http://66.102.9.104/translate_c?hl=...rt=280&usg=ALkJrhigVfV9tLK4nQjO6pm00-lUGJN42g
To flash the firmware:
1. Unzip archive using provided above password
2. Copy flash.dio to SD card (important!!! it must by SD (<2GB) not SDHC card)
3. Turn the device off (push and hold power button)
4. Insert your SD card
5. With the same time push: record, mute and power button
6. After ~1sec release power button then remaining buttons
7. You will get "SDloader"
8. Do not touch anything until iPAQ boot itself (you can observe progress bar)
You have done...
Regards,
Bigu1975
Have you tried this rom? It has manila cooked in right? I have the auto shutdown problem with my ipaq, is it safe if i install teh power update patch by hp before putting this rom? I guess it's only rom, not a radio update so it won't affect it, but i don't want to brick it after all... Thanks
Axlastro,
Yes I am using this ROM. It is very fast and stable (it has 12MB pagepool).
Yes Manila is cooked in.
If the power update is a just patch for ROM I believe you can install it just after flash, but if I were you I would rather wait and see if the same problem is in the new ROM - if it is then I will make the patch installation.
Yes it is only Operating System (ROM) update.
Axlastro,
Yes I am using this ROM. It is very fast and stable (it has 12MB pagepool).
Yes Manila is cooked in.
If the power update is a just patch for ROM I believe you can install it just after flash, but if I were you I would rather wait and see if the same problem is in the new ROM - if it is then I will make the patch installation.
Yes it is only Operating System update.
Manila to hp 614c italian rom
I have a italian rom and it works
ROM Version
bigu1975 said:
Axlastro,
Yes I am using this ROM. It is very fast and stable (it has 12MB pagepool).
Yes Manila is cooked in.
If the power update is a just patch for ROM I believe you can install it just after flash, but if I were you I would rather wait and see if the same problem is in the new ROM - if it is then I will make the patch installation.
Yes it is only Operating System update.
Click to expand...
Click to collapse
Which ROM are you useing? I am using HP IPAQ 614c CE English OS 5.2.20757 (Build 20757.1.4.0) OS 5.2.20757 (Build 20757.1.4.0) v 1.5 (yevg001) Having a hard time with BT
Formally this is WM6.1 v1.6. I described it in post #5 (above).
re: bigu1975
Hi there. I installed this rom : http://forum.xda-developers.com/showthread.php?t=446243 ,but it doesn't have manila cooked in. I will be flashing it again with the rom posted in the site. I noticed that some of the netcf programs won't work - they exit and report error. I'm satisfied with the overall performance of the wm 6.1 rom - it has all the hp goodies and even the camera works better i also notice far better booting times and file system read/write speeds. I do have active sync problems - the device doesn't always connect. So finally my question : Do you have any particular problems like those described by me with the version of the rom you are using.
axlastro said:
Do you have any particular problems like those described by me with the version of the rom you are using.
Click to expand...
Click to collapse
Hi,
In general I don't have any problems related to programs. Mentioned ROM is clean, stable and it is very fast. It includes the same as HP ROM with new kernel from WM6.1 + Manila and some other useful applications which are tested and they are working fine.
I have noticed only one minor problem related to toggle WiFi using TouchFlo. It can be simple solved by the following method:
http://forum.xda-developers.com/showpost.php?p=2954341&postcount=9
ActiveSync - I noticed similar problems on WM6.1 on different devices. I think it is caused by ActiveSync itself. IMHO the problem is when you connect your device with ActiveSync already running. Then described problem appears. When ActiveSync is not running then it is fine. I hope I solved this problem by adding (in ActiveSync) dummy server and by setting the Sync time to manual. This already described, on this forum, solution protect ActiveSync against automatically start and also helps on syncing issue.
I have used many ROMs for 614C and I think Yevg001's ROM are simply the best. This one is the fastest one I tested. After few days of testing I recommend this one
Regards.
I have few bugs.
When I add MyFaves widget touchflo would not start and
Internet widget is not working for me?
Anyone has the same problem?
Rajnus said:
I have few bugs.
When I add MyFaves widget touchflo would not start and
Internet widget is not working for me?
Anyone has the same problem?
Click to expand...
Click to collapse
MyFaves it is TouchFlo problem. I don't use it
Internet widget doesn't work because there is no Opera browser in this ROM. I think when you install Opera it start to work. On this Manila version the Internet browser link is hardcoded to Opera. As I know in the newest Manila version it is possible to change the link to different browser. At this moment the newest Manila works only on HTC devices - we can't install it on our HP.
Recently my htc viva has been unable to launch its camera function. I tried hard reset but to no avail. I flashed it to wm 6.5 last summer and it worked perfectly fine until last week. Should I flash another ROM to see if it works?
sth336 said:
Recently my htc viva has been unable to launch its camera function. I tried hard reset but to no avail. I flashed it to wm 6.5 last summer and it worked perfectly fine until last week. Should I flash another ROM to see if it works?
Click to expand...
Click to collapse
yes...try other rom to check whether it is software problem or hardware problem?
Posted a question a couple of weeks ago asking about getting android to work on my phone. I have since talked to a couple of people with the same problem and all of them have/ had the T mobile ROM on there phone (not the T mobile hd2 with the coloured call and hang up buttons, just a standard HD2 which originally had T mobile on it ie T-mobile boot screens web and walk etc). And suprise suprise all without any Tmobile software on there phone worked without a hitch.
I am currently runing chuckyROM WWE, radio 2.11.50.20 and multiple android builds (not on the phone at the same time ofc)
Anyway my question is, Does anyone who has/ had the T-mobile rom/ software on there phone found a working combination of custom rom, radio and android?
I have 100% stock T-mobile HD2 with the newest updated rom from T-Mobile.
android
im running is HD2Froyo_v3 non sense by darkstone, had problems with 3G/H freezing on me. updated to the libhtc_ril_wrapper V0.3 and it run PERFECT now