Hello,
I recently have updated my tc to wm 6.1 but after updating i can't see HTC Home anymore. In the today setting I've turned it on en the space is reserved on the screen but there doesn't apear the home screen.
Any suggestions here?
Make a Hard Reset
Thanks for you reply but a hard reset doesn't solve the problem.
Can it have anything to do with the fact that I've replaced the radio yesterday for a cracked version to install the ROM from this forum with touchflo 3D. After installing both the radio and the new rom I've ren into some problemes so I've decided to go back to the original ROM 6.1. But now I can't get HTC Home to work. I only need to switch it on in the Today settings i guess but I can't see it after turning it on. Only the space where it should be is visible.
Are you sure you are using official WM 6.1 ROM and not a cooked one?
Sascha
Yes, I've downloaded it today from http://www.htc.com
mpost112 said:
Yes, I've downloaded it today from http://www.htc.com
Click to expand...
Click to collapse
I have the exact same thing here, so solution found yet.....
Download another version or try to installe the cab to make reappear HTC Home, or check settings/today/items
Anyone a link to a working HTC Home cab file?
Related
Hi guys,
I've searched a lot in this forum but I couldn't find a solution.
Is it possible to install the HTC Task Manager like in the WM6 Images in the original HTC WM5 (German) image? I'm missing this task manager in the upper right corner on Today screen - it was very helpful.
I switched back to MW5 official image, cause the network connection in the coocked WM6 roms (GSM) was so good (persistant) at all as in the original image.
thanks in advance
Pinocchios
you can try this HTC X-Button 1.51. I had on my WM6 official rom and it is working great.
edkmho said:
you can try this HTC X-Button 1.51. I had on my WM6 official rom and it is working great.
Click to expand...
Click to collapse
does it works in wm5?
how to uninstall x button 1.51? if i have to return to v 1.0?
It's working on my TyTN WM5.
Uninstall in usual way: start>settings>system>uninstall
edkmho said:
you can try this HTC X-Button 1.51. I had on my WM6 official rom and it is working great.
Click to expand...
Click to collapse
Thanks a lot!
hey guys i've upgraded to Helmi Windows Mobile 6 the first day it came out but as i see right now there is other versions of wm6 , which one is better more stable less bugs and so on ....
Thank You
yup, same question here..
actually my OS is Helmi Windows Mobile 6 Profesional R0 CE OS 5.2.1620 (Build 18125.0.4.2) , and i would like to know if it's better to switch to WM6 Pro CE OS 5.2.1933 (Build 18533.0.7.0) or WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT)
i hope that somebody who tested these 3 version's could help us
thanks in advance
Luis
newkpt said:
yup, same question here..
actually my OS is Helmi Windows Mobile 6 Profesional R0 CE OS 5.2.1620 (Build 18125.0.4.2) , and i would like to know if it's better to switch to WM6 Pro CE OS 5.2.1933 (Build 18533.0.7.0) or WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT)
i hope that somebody who tested these 3 version's could help us
thanks in advance
Luis
Click to expand...
Click to collapse
For those who dont know, PDAViet has just released a new BA rom with thse spec : WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5.
it has built in TouchFlo, and als the latest .NetCF 3.5 as Extrom...
I also have tried all the WM6 version since Helmi R0 release, Xplode's latest rom and PdaViet's WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT).
All are good, stable and fast.
I tried Xplode's latest rom for only 1 day and switched back toPdaViet's cause I had problems:
1. Somehow, the OK button (on top right hand corner) close apps without saving it (I had this problem when using PocketInformant and PocketBreeze - weird. I put it on forum, but no one else seem to have this issue)
2. I feel that the touch screen is not as responsive as other roms -I dont know, maybe I was wrong...but this is what i feel anyway
For now, I am using PdaViet's latest rom WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5.
, and its very good...
hey i hv tested all the three but i hv not found big changes in them and switch back to helmi as i hv the backup of it. all three r same as they r helmi based. so i advised to go for helmi it also has gsfinder as file explorer.
which is the best
I have tried have all three of the latest roms but the ones that are the newest is pdaviets rom with office 6.1 and xplodes. Hemlis wm6 is older than the others so any of the other 2 are better.
It seems that the speed of xplodes and pdaviets are ABOUT the same but i find that pdaviets rom is slightly faster- programs open faster, and there is no stalling. Pdaviets is more stable- when i installed pdaviets 5.2.000 i only soft reset it about once- it works flawlessly. I can open more programs at the same time without stalling and freezing with pdaviets than with xplodes. With a great combination of stability and speed pdaviets takes the cake.
Although i can not use the touch flo cube that comes with pdaviets because of i can not get rid of my older version of touchflo i installed in my BA- for some reason i can not uninstall it or remove it but i hear it works like a charm.
shazzy84 said:
I have tried have all three of the latest roms but the ones that are the newest is pdaviets rom with office 6.1 and xplodes. Hemlis wm6 is older than the others so any of the other 2 are better.
It seems that the speed of xplodes and pdaviets are ABOUT the same but i find that pdaviets rom is slightly faster- programs open faster, and there is no stalling. Pdaviets is more stable- when i installed pdaviets 5.2.000 i only soft reset it about once- it works flawlessly. I can open more programs at the same time without stalling and freezing with pdaviets than with xplodes. With a great combination of stability and speed pdaviets takes the cake.
Although i can not use the touch flo cube that comes with pdaviets because of i can not get rid of my older version of touchflo i installed in my BA- for some reason i can not uninstall it or remove it but i hear it works like a charm.
Click to expand...
Click to collapse
What do you mean you cannot get rid of the older version of touchflo? After reflashing the new rom, whatever you have before will be gone..... just make sure you do the no yes yes option...
And you are rite, touchflo on Pdaviets latest rom works very well...
Just want to say yes, I am using latest rom of PDAViet too, and I love it. All bugs seems fixed. I just don't like the touchflo as I was using HTouch before and it works better (quicker, smoother, no flare, more open to add links...)
ftouch
joseph.sapri said:
What do you mean you cannot get rid of the older version of touchflo? After reflashing the new rom, whatever you have before will be gone..... just make sure you do the no yes yes option...
And you are rite, touchflo on Pdaviets latest rom works very well...
Click to expand...
Click to collapse
I installed a previous version of ftouch before the one in pdaviets came out and i installed it on my hemli wm6 rom when it first came out. I did uninstall the program but although the file was removed touch flo was still active on my BA. No matter how many times i have flashed my BA to another rom ftouch is installed on my BA. It is very weird.
I did however find the ftouch program and it is located in my BA "windows" folder under "startup". When i try to delete that it says thats the file can not be deleted. I am not sure what you are talking about when you say " no yes yes" option because everytime i flash a rom it goes to the align screen option. Any help would be appreciated.
shazzy84 said:
I installed a previous version of ftouch before the one in pdaviets came out and i installed it on my hemli wm6 rom when it first came out. I did uninstall the program but although the file was removed touch flo was still active on my BA. No matter how many times i have flashed my BA to another rom ftouch is installed on my BA. It is very weird.
I did however find the ftouch program and it is located in my BA "windows" folder under "startup". When i try to delete that it says thats the file can not be deleted. I am not sure what you are talking about when you say " no yes yes" option because everytime i flash a rom it goes to the align screen option. Any help would be appreciated.
Click to expand...
Click to collapse
the no yes yes option refers to cleaning up the rom i.e. similar to the concept of formating the whole rom data.... you should do this after reflashing a new rom build.
when you reset and you get to the 3 colored screen, press and hold camera + record button for about 2 sec... use record button to choose, camera button to change no/yes... and then press mail button to confirm...
its all in wiki, under the instruction on how to update rom...
I prefer Xplode's latest release...its the fastest one by far, in my experience...can't really fault it at all....I dont like the Touch Flo...it's too slow on the BA...and I don't find it beneficial at all...just a waste of resources.
joseph.sapri said:
the no yes yes option refers to cleaning up the rom i.e. similar to the concept of formating the whole rom data.... you should do this after reflashing a new rom build.
when you reset and you get to the 3 colored screen, press and hold camera + record button for about 2 sec... use record button to choose, camera button to change no/yes... and then press mail button to confirm...
its all in wiki, under the instruction on how to update rom...
Click to expand...
Click to collapse
excellent! Thanks a lot joseph sapri! I just did it and i have so much more rom space and the ftouch is gone! MUCHO appreciated
no probs. I was in your position before.. . This is what this forum is for...
i see by far more people like PDAViet release
could any one provide download link and is there any thing special we have to do to upgrade from helmi WM6 ?
Thanks
Download links are in corresponding threads - THE FIRST POST usually
You should backup your data before flashing, upgrade procedure is the same as for any WM6.
Here is the link to the rom, as posted by Iced Coffee...
http://www.4shared.com/file/31606851/8e53a788/ROM_BA_Touch_8002.html
Just do normal upgrade procedure....
joseph.sapri said:
Here is the link to the rom, as posted by Iced Coffee...
http://www.4shared.com/file/31606851/8e53a788/ROM_BA_Touch_8002.html
Just do normal upgrade procedure....
Click to expand...
Click to collapse
I just upgraded using this rom, but the sim card cannot be recognized. Any suggestions?
It's a no go. I've tried 3 different times today and each time it has resulted in a HARD reset. Completely wiping my Mogul.
Has anyone had success??
ROM Version 3.56.651.0
Radio 3.42.02
I'm no longer on the official Sprint ROM, but when I was, HTC Home was working just fine. Are you running it with HTC Home Customizer (HHC)?
I had the same problem when I upgraded to WM6.1. To resolve it, I reinstalled the HHC (HTC Home Customizer) first and then through it, downloaded the latest version of HTC Home Plug-in directly onto the phone. Works fine now. Good luck.
I just checked and the new version of HTC Home is specific for WM6.1 The version 2.1 caused all sorts of havoc with mine when I tried it on WM6.1
TO be honest...I'm not sure what I've done...but I have it all working now.
Can we install (eg. with a .cab file) the new Manila 2D (see attach picture - Weather/Flipclock) on our orginal WM6.1 ROM ?
Hello Treo, try this thread.....http://forum.xda-developers.com/showthread.php?t=541750
It will work. However I would recommend you to install first hard SPL and than a new WM 6.5 rom with this theme.......is much more complete, smoother and functional....
succes.
Frank C.
it doesn't work!
Frank Caarls said:
Hello Treo, try this thread.....http://forum.xda-developers.com/showthread.php?t=541750
It will work. However I would recommend you to install first hard SPL and than a new WM 6.5 rom with this theme.......is much more complete, smoother and functional....
succes.
Frank C.
Click to expand...
Click to collapse
it doesn't work!!!! i try it right now...
i can't change original rom before a year because i could lose italian guarantee...
The thread is verry confusing me and it isn't entirely coordinated on the Iolite.
When I update a non-HTC ROM I will lose the guarantee, So I preffer an installation of Manila with a kind of .cab file.
After you install the HardSPL, you can always restore the original SPL to your device, if you have an issue with it... And then send it back for guarantee...
Blubster said:
After you install the HardSPL, you can always restore the original SPL to your device, if you have an issue with it... And then send it back for guarantee...
Click to expand...
Click to collapse
But how to restore our stock rom ?
You can dump it from your device before you flash a custom rom, and then rebuild a "stock" rom with the dumps with ervius kitchen...
Then if you need to send it back for warranty, you can flash the stock rom, then the stock spl, and you are good to go!
That is IF you can flash back, ie your screen and your usb port are still working...
I have this running and it works fine, the only problem is that the default blue O2 background is still behind the flip clock. Any ideas how this can be fixed???
Mark
rorrism said:
I have this running and it works fine, the only problem is that the default blue O2 background is still behind the flip clock. Any ideas how this can be fixed???
Mark
Click to expand...
Click to collapse
How and what did you installed ?
Hi,
Yesterday I bought HTC Touch 3G (Jade) with Windows 6.5. While rest all is good, what is sorely missing, is the TouchFlo, which makes navigation super cool and easy.
I see several TouchFlo .cab and ROM files for Windows 6.5. So I have few questions about their compatibility:
Which is safer to install? .cab or ROM? I see that installing .cab is like installing a program, but what about ROM? Does installing ROM would wipe out OS? Will it make the phone unstable?
How do I ensure that ROM will work on my Touch 3G Jade?
I tried installing couple of .cab files (around 5-10 MB) for touchflo but neither worked. I don't know what went wrong.
Last question, is it worth keeping Windows 6.5? Or should I opt for older Windows 6.1 with TouchFlo? (The seller is giving me a choice).
ask ur Question in the Jade Q & A it is a stiky
MOVED TO GENERAL
htc_touch3g_user said:
Hi,
Yesterday I bought HTC Touch 3G (Jade) with Windows 6.5. While rest all is good, what is sorely missing, is the TouchFlo, which makes navigation super cool and easy.
I see several TouchFlo .cab and ROM files for Windows 6.5. So I have few questions about their compatibility:
Which is safer to install? .cab or ROM? I see that installing .cab is like installing a program, but what about ROM? Does installing ROM would wipe out OS? Will it make the phone unstable?
How do I ensure that ROM will work on my Touch 3G Jade?
I tried installing couple of .cab files (around 5-10 MB) for touchflo but neither worked. I don't know what went wrong.
Last question, is it worth keeping Windows 6.5? Or should I opt for older Windows 6.1 with TouchFlo? (The seller is giving me a choice).
ask ur Question in the Jade Q & A it is a stiky
MOVED TO GENERAL
Click to expand...
Click to collapse
hi
to my knowledge the Jade does not come with 6.5 preloaded
an touch flow 2d is part of the phone system
may be u have a Cloan
Hi Haree,
I too bought a Touch 3G recently which has WM 6.5
However, in the packing, it's mentioned WM 6.1
Please let me know if TouchFLO 2D can be installed in WM 6.5
Jebasingh said:
Hi Haree,
I too bought a Touch 3G recently which has WM 6.5
However, in the packing, it's mentioned WM 6.1
Please let me know if TouchFLO 2D can be installed in WM 6.5
Click to expand...
Click to collapse
I too bought HTC Touch 3G T3238+ from ebay.in
IMEI nubmer as mentioned by seller is correct when checked on several sites as well as HTC. However, most of the functions in the device are different from original HTC Touch 3G as shown on their site (HTC)! Seller says its due to upgradation of WM to 6.5 from 6.1...
I have searched on XDA-Developers.com but no skin is available that can go with this device (may be, I couldnt get proper one!)
Could experts help me installing TouchFLO in my device?
Jebasingh said:
Hi Haree,
I too bought a Touch 3G recently which has WM 6.5
However, in the packing, it's mentioned WM 6.1
Please let me know if TouchFLO 2D can be installed in WM 6.5
Click to expand...
Click to collapse
p4u said:
I too bought HTC Touch 3G T3238+ from ebay.in
IMEI nubmer as mentioned by seller is correct when checked on several sites as well as HTC. However, most of the functions in the device are different from original HTC Touch 3G as shown on their site (HTC)! Seller says its due to upgradation of WM to 6.5 from 6.1...
I have searched on XDA-Developers.com but no skin is available that can go with this device (may be, I couldnt get proper one!)
Could experts help me installing TouchFLO in my device?
Click to expand...
Click to collapse
hi
to both above t3238 is a cloan and to my knoledge orignal HTC jade does not come with 6.5 preloaded