ok guyz plz try ur best to help me am downgrading my c500 from wm5 to original but the problem is i went through all the steps to http://forum.xda-developers.com/showthread.php?t=379697
i can manige to to it all but there is 1 step that i just dont understand i mean am great on pc's i would call my self a great hacker but i just cant do this please some one help me on this step
Quote:
psdwrite i: f:\image.img
where "i" is the drive letter for your SD card, and "f:\image.img" is the location of the ROM you downloaded from step 1. Be patient and the ROM will be written to the SD card.
ok i downloaded the program i just need to get the image.img file writed to the sd card but have no idea how i would be greatfull for someonewho can give a quick guide on how to write a image.img rom file to a sd card thanks in advances
Related
Hi,
This is the first time I try to upgrade my Qtek :roll: . I downloaded the RUU3.16.52.exe and RSU3.23.01.exe .
But I run the RSU3.23.01.exe (by mistake ) which completed successfully. When I run the RUU3.16.52.exe it continues until the last step where it say connecting to device and then exists and nothing happens on Qtek nor on the PC.
Any help appreciated.
ReNEGade
I have a stupid idea if the flash utility doesn't work for your machine.
You need a SD card and SD card reader, and the XDArite.exe (XDA rom image tool) , extract the rom files from the ruu3.16.52.exe (nk.nbf) and write it to the card.
Then insert your SD card to the Qtek and enter the Bootloader, flash the rom , everything will be ok.
My PC's activesync crashed and hanged while flashing the ROM. Now the xda is stuck with Updating screen.
Can someone please tell me which file to download from Jeff's kitchen (nk.nb1 or nk.nbf or anything else) and how to write it to SD card for flashing.
I tried to write nb1 and nbf both, using xda-tools, but it is not copied in the format required by the bootloader. In fact, in either case it is copied as a file which is not identified by the bootloader (my version is 5.15). boootloader starts with GSM OK message, and does not give me option to flash the ROM.
Can someone please please tell me how to do it?
you need SD card writer or a SD backup from another XDA.
cgigate said:
you need SD card writer or a SD backup from another XDA.
Click to expand...
Click to collapse
Thanks.
I was about to go to the service centre for rom image from another xda, but I decided to give it a try using usb cradle, and ran the original upgrade program. It came out with error and asked me to soft reset the device and try again, which I did, and it worked. I now have a working xda!
Hey everyone. I have big problem and i need a help or somebody who can help me fix my problem. When i use XDA-developers-SER-v12 to upgrade my SX56 my PC freeze up and upgrade wasn't finish . Now i can see on my display only black and white line. Nothing more or less. PPC is not working with my PC
Anybody can help my or give me any adress i can send PPC to fixed (if it's possible) ? Or i don't know what can i do ........... :roll:
Thank for hepl !
sorry my english :?
You need to use sd card flashing method, your phone will be ok, just look around the forum look for sd card flashing.
BIG PROBLEM ! I probably damage my SX56 upon his upgrade
cruisin-thru said:
You need to use sd card flashing method, your phone will be ok, just look around the forum look for sd card flashing.
Click to expand...
Click to collapse
OK but how can i reflash my SX56 with SD cadr if I don't have any back up ?
plus everybody has bootloader 5.17 or older but my is 5.22 :-(
Hello,
you have 2 options both use SD card:
1. get ROM backup from any other working XDA.
2. get SD card reader/writer. change the extention of the ROM file you cooked to .zip and use winzip to extract a file named NK.nbf under \english directory. use the SD writer to copy this file to the SD card.
in both cases, insert the SD card into your XDA and use the bootloader.
good luck ...
similar problem last year
Hiya Mike2001,
I had a similar problem last year. I found that while the ActiveSync monitor shows no connectivity you will still be able to transfer an OS image. One hiccup I did find, and I am running wallaby 5.17 by the way, is a version conflict with the proposed rom and existing header information. This is a windows registry problem on your PC caused by the crash which needs to be deleted prior to attempting the upgrade.
Hope this helps,
Cheers,
David A. Booth
hello i was installing a new rom to my mobile (prophet) and after it finished i found my memory card had been stopped to work properly i found
1 when i open my storage card from file explorer it open the card but i donot find the files which there was on it
2 when i try to see how is the memory available on it ,i found the same memory which it was before i install the rom and i see that the card has a very big memory used which it was on it before but no files can be seen
3 i tried to even format the card but i cudnot do that and i read want to the files which was on it
plz i know that there r many experts here who gonna tell me wat to do
i used the program called pocket mechanic but it didnot do anything new
plz i wanna quick answer
thx for everyone
Don't post new threads demanding a quick answer!
Your files are encrypted!
TheChampJT said:
Don't post new threads demanding a quick answer!
Your files are encrypted!
Click to expand...
Click to collapse
i;m soo sry
i didnot encrypted my files but that appears when i installed the new rom
TheCHAMPJT is correct, you"re files have been encrypted by the built in program in the rom. You should be able to unlock it again using the same program (under settings) provided you haven't and DON'T reflash your rom on your phone. That will make problems much worse.
why didnt you follow the age old rulle and take out all the cards in the phone?
dose any one have the organal rom flash for i mate jasjam.
or where can i fine the site for it.
Orijinal JASJAM Rom
Look the www.imate.com for the original JASJAM ROM , but is a WM5 rom
it fine.
thanx
plaese could some one help with the. flash you put on the SD card to hard flash. as im unable to flash from the the normal program form the i mate site.
thanx
To use sd card method you need to have Hard SPL installed.
1. Format sd card FAT32. Copy .nbh file of the om you want on to it. Rename to hermimg.nbh
2 Insert into Hermes and go to bootloader.
3. If the ALL steps have been followed exactly then follow the prompts.
Cheers...
ultramag69 said:
To use sd card method you need to have Hard SPL installed.
1. Format sd card FAT32. Copy .nbh file of the om you want on to it. Rename to hermimg.nbh
2 Insert into Hermes and go to bootloader.
3. If the ALL steps have been followed exactly then follow the prompts.
Cheers...
Click to expand...
Click to collapse
i know how to do that. in looking for the organal rom the .nbh to put on to my sd card.
If you have the original rom, and its an exe file, right click on it and select "extract here". It should give you all the files in the .exe file including the .nbh file.
If you haven't got the file and are loking for it, good luck.... Might be in the wiki but might not. You might be lucky and have someone here who has it but its not gonna be emailed to you. At 60 to 90 Mb its not gonna go through.
Cheers...
thanx ultramag69. you are great help i have come right.