Related
Hi all,
Since last friday I'm the happy owner of an S200, until sunday atleast. After a soft-reset, initiated from windows, my device won't boot anymore. It hangs in the red-green-blue bootloader screen (says: IPL 2.09, SPL 2.09). I've tried soft-resets and hard-resets, but the device would consequently keep hanging in the bootloader.
So for the past few days I've been searching the web and just managed to update the ROM. I was expecting that updating the ROM succesfully would mean my device would boot again, but it still keeps hanging in the bootloader (saying IPL 2.09 SPL 2.15 now, so the update did take place).
Does anyone has any idea whats wrong with my phone? Or how to fix this? Please help.
* bump *
I've been searching further and tried to do a SD dump, but I'm getting the message I don't got enough rights to perform a SD dump. This meens my S200 isn't CID unlocked. Is there any way to CID unlock the device without the need of booting into WM?
The solution to your problem
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
hi syzzer,
i really feel with you - why? - i have the exactly same problem. after i tried to upgrade my rom from o2-germany to another one the device isn't starting anymore and hangs in the beautiful-colored bootloader. and now, if i just even want to re-install the same or another rom, doesnt matter which one, the s200 wont start again. i think this is a really unlucky situation for us to stand alone with our weak pda =) hoping for more help, otherwise we have to take up our warranty and try to get it fixed by the store we did buy it (if a rom-update damage is still in warranty )
good luck
budy!
awechris said:
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
Click to expand...
Click to collapse
in my case, the camera button is not pressed in... i truly don't know what to do hopeless? mhm?
greets!
budy!
hello Syzzer
I have the same problem, but i make a soft reset and it works.
Camera but + Com Button + Power
Wait until message appear.
You Get the message : For Hard reset press send
If you choose other key the system boots normaly.
I had already tried all your suggestions, but nothing seemed to work.
About a month ago I bought a Trinity. In the mean while, I forgot I had put my S200 in my bag and carried it around for a month. When I found it a week ago and started pressing random buttons, it suddenly booted and has been working ever since! The problem has gone as mysterious as it came. I can only imagine there was some hardware failure / dirt in my device that caused the trouble and is now gone / moved to some place it does not do harm. Because I already bought a Trinity, I gave the S200 to my brother. He's been using it ever since and did not have any problems. So keep your head up, there's hope!
I m also having the same problem
Now I am having the same problem, no button is pressed, and I can not install the NVID ROM
Actually I can install only a few ROMs, the NVID ROM was working before on my Neo perfectly but, I think it can be because I have changed many ROMs, from a month, actually I have tried different WM6 ROMs and I used NVID ROMs mostly for Step 1.
Now when I install any ROM, it shows a msg some nbf one after 80% or 95%
It can install the pdaviet first step ROM, but now the problem is that it hangs very much and it can not start Wifi, it has stopped working, a few more ROMs i have tried, but the WIFI is completely stopped.
When I press it in communication manager, it will show busy icon for a few seconds and will not start it in end.(I tried it in both WM5 and WM6, same problem, I also tried after soft reset and hard reset, the problem is still there)
Please someone help me out.
Hi Friends,
My new mobile phone SPV M600 got stuck whil starting showing four lines of messages as shown below.
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 2.10.1.22
Can any one please help me in geting my phone to today's screen.
I also attached the screen shot for reference.
did you try a hard reset ?
Ya I tried both hard as well as soft reset but same screen is stuck again and agian.Can any one please help me in this regard as I am very new to PDA family.
Ok, first things first:
Since you are new to this, are you sure you preformed a hard reset?
It is done by holding power + camera + comm manager buttons (one on the right, two on the left) and pressing with stylus in the reset hole at the same time.
A message should appear asking you to press 'send' (green phone button) to confirm reset.
If this does not help, you may have a serious problem.
Please answer the following:
Is the device fully charged?
Phone will fail to boot if the battery is too low.
Did you install any software right before this happened?
This should have been resolved by hard reset, but just in case I am asking.
Did you change the ROM, attempted CID / SIM unlock?
This could require more serious measures than I can advise on.
I did exactly the same thing which you mentioned.But even then it is stuck at the same screen.
Ya u r right I unlocked my mobile using a software from eBay.The unlock was successfull and I tried to insert T-Mobile sim, it also captured the signal and I was able to make and recieve calls then after that I wantedly switched off the phone and then tried to start it, there got the problem.
Can any one help me in this regard please.
I am having the same problem, but my phone is not sim-locked.
I've got the same problem after attempting smart1_wm6_pp8mb.exe
I'm having the same problem with my G4 QTEK S200:
Attempted to upgrade to WM6 Rom using smart1_wm6_pp8mb.exe
After reboot the phone got stuck at the QTEK Screen
Tried Hard Reset (Camera+Power+Comm+Reset) followed the steps with the same results (bricked)
I also tried re-flashing the rom back to the factory one using RUU_Prophet_220734_2207114_024721_QtekWWE_Ship and ROMUpdateUtility-NoVendorID.exe in Windows Vista with WMDC (Windows Mobile Device Center v. 6.0.6873) and the phone in boot loader mode (tri color screen) with working USB cable, with windows firewall disabled and symantec AV disabled as well, RUU keeps saying error 260 "the update utilitiy cannot connect to your pda phone..." .
Do you think I should try this process using XP instead? No matter what i try i keep getting the error 260
Any help would be greatly appreciated
Got it fixed!
it was definately a Vista issue. once i tried it in XP with ActiveSync it worked like a charm and i got my phone back up and running. also used spb backup and restored all my settings.
ipl/spl screen
i got the same problem with new rom wm6, and the 260 eror, my problem is that i have xp and the activesync does`t connect ...
... means i cant redo the original rom ????
PLEAAASEEE HELPPPP !!
Again My phone SPV M600 got stuck at IPL/SPL screen
Please Can some one advice me how to get my phone back.
I raised the same issue 7 months back after that my phone got recovered automatically and there were no issues till last month. Last month onwards it is again got the same problem and now it is permenantly stuck at that screen what ever you do.
yekanth said:
Please Can some one advice me how to get my phone back.
I raised the same issue 7 months back after that my phone got recovered automatically and there were no issues till last month. Last month onwards it is again got the same problem and now it is permenantly stuck at that screen what ever you do.
Click to expand...
Click to collapse
A rom reinstall on xp solved my problems on that one. retry a couple of times! It may not work the first time! hard reset as well...
Try an official wm5 rom just in case
good luck
Can you please gimme step by step procedure
HI Phil,
I am new to these kind of installations . CAn you please Gimme step by step procedure for ROM installation.
mine is now also stuck, after trying to install new rom. wont connect to active sync either, have i fooked it? tried hard reset etc.
thanks
(with a turned off phone, press and hold camera button then insert USB cable)
then flash provider ROM
RECOVERING FROM ERROR IN STEP 8 WM5->WM6
1. Don't panic
2. Don't panic
3. Unplug the phone
4. Reset with stylus,and keep the Camera Button pressed.
5. A 3 color screen will appear(Bootloader Screen)
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
7. The device will be resetted after RUU(rom update utility)finishes
8. Repeat the WM6 upgrade,from STEP 5..
Click to expand...
Click to collapse
from here http://forum.xda-developers.com/showthread.php?t=310452
hi jay
i seen your post in n00b guys one, i fixed it!!!!, thank you so much, i couldnt remember how to get it to those 3 colours.
thanks again
Colin
Hi Iam unable to get the NVID ROM
Hi,
I am unable to get the NVID ROM. The Rapidshare link that has been provided in the other thread is not working. Can some one tell where can i get the ROM.
collywog19 said:
i seen your post ...
Click to expand...
Click to collapse
no problem mate.
..and yekanth i see what u mean about the dead links. i have the files on my computer at home but i'm posting from my prophet right now, so i can't upload. Try using the "pdaviet temp" from one of the wm6 threads?
(http://rapidshare.com/files/54265407/Prophet_PV_Temp.zip)
Hi Iam able to update the Rom but no use
Hi,
To mention my phone is from orange-UK. I got the orange rom from our FTP site and did the flashing/update what ever you say.But still it is getting stuck at the same IPL/SPL screen. Iam very much worried that I will not get a proper solution for my problem.It will be very grate full if some one resolve my problem.
just seems strange...how did you fix it last time? did it just start working again? A random guess would be that the camera button got liquid spilled on it or is stuck in.
If the camera button is pressed in the phone will go to 3 colour screen every time it is turned on.
It won't do any harm if you try to press/move that button to see if u can "unstick" it, not likely I think but u never know...
Help I cannot get my 8525 off the tri colored screen. I have been searching thru these forums but have not found the right combination.
It is set up for WM6 and att
did you press the reset button and it still comes back to this tricolor screen?
if resetting doesnt work, hard reset, if that doesnt work then yu may have to reflash os. My suggestion would be using the sd card method as all you need to do is be in bootloader with a fat32 formatted memory card and the .nbh file of your favourite rom installed on it and renamed to "hermimg.nbh". hope this helps...
stuck in bootloader screen
my phone...said no signal...I couldn't even open the phone pad ....then my sim did not show.....I tried soft resets several time.... nothing would help I noticed under device info it would not show radio version or rom version..... so I downloaded a fresh version or att 6.0 wm.. and tried that to see if it would help... while installing it stop @ 11 percent with error code.262 tried several times and nothing still same thing..... is their hope.... can I install a cooked rom... or is my phone dead I hope not but you guys are the best....can anyone please help......
dr71399, sounds as if your radio has had it... try to fix any bad blocks on your phone with MTTY first(do a search in upgrading for instructions) first then try to flash a radio only rom, if that doesnt work you should do a search for others that have had their radios corrupted and see what is suggested. Sorry to be the bearer of bad news but most people find once that happens its a brick, not that you cant flash an os only rom to use as a PDA.
If your phone is still under warranty then try to put the original rom back on and return for warranty but thats all I can think to do... See if a chef can fix up an os only rom for at&t or try to do it yourself.
Hi all,
a few days ago I installed IlSalgo 6.5 rom because sometimes i've found my polaris with 3lit3 rom powered off.
This morning after I powered on my polaris it stopped at the first screen (on energy star) and then it shutdown.
I tried with an hard reset while it starts, but nothing changes...
Could you help me?
Thanks in advance,
Reveng3
P.S. sorry for my english
try to put into bootloader; hold camera and press the reset hole.
Then when in this flash your stock rom that was shipped with it or the 6.1 upgrade that was released. See if that brings it back to life!
Let us know what happens after that and go from there.
I tried putting it into bootloader... it shows the colors screen and then shutdown....
But now it works....(finally it stopped on colors screen without power off)
maybe after i removed the microSd (i tried with and without microSd, with and without sim, soft reset, hard reset, bootloader)
this evening i'll try using again my microSd card...
thanks
I have another problem...
i'm trying to change rom.... (pcarvalho eXtreme) because after I restored the rom.... it stopped working again...
in the pcarvalho rom page there is "flash this rom 1st if you have any stability issues" (the original htc rom)
ok, i'm flashing my htc....
i'm on 31% and the update is blocked.....
is there a way to avoid problems? now I think the only thing i can do, is to remove the usb cable or kill the update process....
please help me...
thanks...
Edit: i'm trying with recovery (rom updater utility, after connection blocked, says me to recover.....).... brrr....
Edit2: blocked again on 31%...... please tell me something....
Edit3: All it's ok! After recover, before starting again flashing I used another Rom (my first used.... 3LIT3)... Now it works fine!
Reveng3 said:
I have another problem...
i'm trying to change rom.... (pcarvalho eXtreme) because after I restored the rom.... it stopped working again...
in the pcarvalho rom page there is "flash this rom 1st if you have any stability issues" (the original htc rom)
ok, i'm flashing my htc....
i'm on 31% and the update is blocked.....
is there a way to avoid problems? now I think the only thing i can do, is to remove the usb cable or kill the update process....
please help me...
thanks...
Edit: i'm trying with recovery (rom updater utility, after connection blocked, says me to recover.....).... brrr....
Edit2: blocked again on 31%...... please tell me something....
Edit3: All it's ok! After recover, before starting again flashing I used another Rom (my first used.... 3LIT3)... Now it works fine!
Click to expand...
Click to collapse
check radio version always
Hi XDA Devs,
I've managed to break my HD2.
I was in ANDROID and shut down the phone over A. since then:
It's stuck on the white boot screen with the HTC logo (without any numbers in the left low corner).
No usb connection, no further sign of hope.
Hard reset, battery out -> nothing seems to help.
Do you got an idea how to get my HD2 working?
Thank you in advance!
Max
HD2 was running on:
2.10 radio (Vodafone Germany)
Artemis 24
Get into the bootloader mode ! do a task 29 format ..once it is completed again get into the bootloader mode and then flash the rom u were using ! cheers
I've managed to get into the bootloader mode and perform task 29.
Right now I'm tryin to upload artemis 24 to my phone but its either stuck at 0% or somewhere between 35%-60%. never came further than that AND it always takes awefully long!
EDIT: now its always 0%. I'm flashing with SSPL_RUU.exe
Do you got an idea how I'm able to fix that?
Thanks
ok ..do one thing ..enter bootloader ..perform task 29 again ...then again bootloader ...change ur radio to 2.07.50. ...u will find this radio in the energy rom thread ..once u have flashed the radio ...enter bootloader again and flash the latest energy rom .:. forget abt the artemis rom for now ..do this and then tell me
yeah! thx, everything went just fine.
I get the feeling something was wrong about Artemis rom.
thanks very much!
Thats awesome ! ..good ! always use energy roms they are much more stable and much better and perfect in itself ,artemis is just like the stock rom and has its own benifits ! welcome anytime ! cheers
My HTC HD2 is not reacting when i touch the screen!!
Hi.... I have an HTC HD2... i have 3 months since i bought it... ever since the phone was working awsome... but like 3 weeks ago the phone started working really slow.. so i decided to do a factory reset to solve the problem... after the phone was rebooted it worked about 10 min perfectly fine.. then it locked as it usually dose (when its not in use).. but when i tried to unlock the phone,the screen was not reacting.. the problem is NOT that the screen dose not display.. the problem is that when i pass my finger throgh the screen to unlock,it dosnt work.. its like freezing... i tried to upgrade the ROM but it still gives me the same problem!!!
Is there a way i can fix this problem??? if there is i would really apreciate youre help!!! Thanks...