Radio for R8 after install R0 - Touch Cruise ROM Development

Update
Hi guys,
After installing RO (witch is awsome by the way! but a bit unstable for my use)
I went back to R8, but my reception was bad.
I Tried all these radio's:
Radio_1.59.42.15
Radio 1.58.26.20
Radio 1.64.06.04
Radio 1.64.08.21
Radio 1.58.25.14
All off these end up with bad reception.
Any clue about what radio might do the trick for me ?
(orbit 2)
Cheers!

Try with Murata

Thanks for rp
Flashing Murata Murata_PPAS_1.58.21.23.

Is it normal that the rom update from murata is full off question marks,
no text is readable just : ???????? ?????? ?????

I used this one : http://rapidshare.com/files/112033239/Radio_Murata_PPAS_1.58.21.23.rar.html

Well i still got those question marks
but went ahead and installed anyway,
seemed like a missing font or something ?!
Reception is a bit better,
before i got 4 bars inside, now mostly 2, and up to 4 when outside.
But its the best radio so far i guess.
Any other radios that might bring here back to the way she worked ?
I remember that in R0 my reception was very good.

I had the same problem, I flushed the original ROM of 6.1WM for polaris and it solve my problem.
Another why is to reinstall back R0, the downgrade the radio to Murata_PPAS_1.58.21.23 and to upgrade the radio again to the latest.

where did you get the original rom?
Could you give me a link
Thanks!

dude, 1.64.08.21 has AMAZING reception.. can't see where you're having problems.

1.64.08.21 = no signal inside
just 2 bars max outside

JinXter said:
Well i still got those question marks
but went ahead and installed anyway,
seemed like a missing font or something ?!
Reception is a bit better,
before i got 4 bars inside, now mostly 2, and up to 4 when outside.
But its the best radio so far i guess.
Any other radios that might bring here back to the way she worked ?
I remember that in R0 my reception was very good.
Click to expand...
Click to collapse
please use Polaris_CustomRUU.exe instead orig you found in package. this protects you from hard reset and question mark will go home
cheers

milukr said:
please use Polaris_CustomRUU.exe instead orig you found in package. this protects you from hard reset and question mark will go home
cheers
Click to expand...
Click to collapse
Thanks for the tip !
Still no solution im afraid, is there a way to reset here back to the 02 rom with original radio. cause next week im leaving for 5 months and i need her up and running back to normal. Now shes as ****ed up as my girlfriend , i really need my gps and 3G working properly.
Cheers

Related

O2 Mini Restarts Randomly

Hi
I bought Mini 6 months back, it was working fine,
but from a monthor so, I've been having this problem of it restarting (rebooting - ie it goes back to the O2 splash screen)anytime, even if its idle..
sometimes it won't for few days, sometimes thrice in one a min, and it has no specific pattern! I've no other softwares intalled on it either!
i have removed everythin from it..yet it is having the problem!
It doesnt harm anything but its really irritating when you are working and it restarts or when you turn it on you see it had tunred off and is restarting....
i have even tryed hard reset but even that dint work..
my ROM versin is 1.12.00wwe radio version is 1.12.00 protocol version is 1337.42 & ExtRom version is 1.12.920 wwe
PLease Help!
As i can't find any reason for it...
Did this start after a ROM update?
i never had a ROM UPDATE
Did you drop it by accident?
Have tried hard-resetting it (power & soft-reset), backup first
M
well cant say ihave dropped it or no...i guess it must have dont know
well i have tryed hard-restart many time but dint worked
enrique_x5 said:
Hi
I bought Mini 6 months back, it was working fine,
but from a monthor so, I've been having this problem of it restarting (rebooting - ie it goes back to the O2 splash screen)anytime, even if its idle..
sometimes it won't for few days, sometimes thrice in one a min, and it has no specific pattern! I've no other softwares intalled on it either!
i have removed everythin from it..yet it is having the problem!
It doesnt harm anything but its really irritating when you are working and it restarts or when you turn it on you see it had tunred off and is restarting....
i have even tryed hard reset but even that dint work..
my ROM versin is 1.12.00wwe radio version is 1.12.00 protocol version is 1337.42 & ExtRom version is 1.12.920 wwe
PLease Help!
As i can't find any reason for it...
Click to expand...
Click to collapse
Some body here help please.......My O2 mini has also the same config and am facing the exact problem for last month and a half......did no upgrade...tried everything....Help
Well come on guys any clue regarding this.... :roll:
As far as i remember i installed the new bluetooth stack available here on this forum...... Nothing else which i can say mite hav started sumthing.
rite now i only hav a pocketplus installed, which infact i'm usin since da first day.
See if ny one can help in this regard.
Do you still have warranty? If so give it a try.
Regards, M
have you tried giving it a hard reset yet??
Bowie said:
have you tried giving it a hard reset yet??
Click to expand...
Click to collapse
yup......did it..... no use.
rashtrapati said:
Bowie said:
have you tried giving it a hard reset yet??
Click to expand...
Click to collapse
yup......did it..... no use.
Click to expand...
Click to collapse
I encounter this before
1. restart randomly
2. hard reset randomly
3. phone receive no signal
later i found out all these symptoms was due to faulty battery packs. I have 3 battery, & 2 of it provides such problem. And these 2 are new batteries
amazingly my original battery still works fine thou it only last a day.
If your set still covered by warranty, send it back. Who knows you might have some battery pins problem instead of the battery itself or the mainboard itself is faulty.
Good luck
may be u r rite..... but i dont think so.....
i guess will have to submit it at the repair centre then
this happens to me also - the resetting just started a couple of months ago. I am using an xda mini, on which I did a bigstorage update last year some time.
I'm on rom 1.11 (date 3/14/05) and radio 1.11
Suppose I would like to update that some time, but... I've moved to Mac and my pc is all dusty! haha.
Anyway, I want to send the xdamini off under warranty, but I'm not sure if it will be a problem that I have Big-Storaged it? Should I try to clear the bigstorage and get it back to original state first, or will they not mind that it has a big storage rom version. I've got a couple of months warranty left.
thanks...
This may sound really basic, but I had similar problem with my imate jam, and it all came down to a loose battery cover. For some stupid reason the jam shuts off power when the cover is removed even before the battery is removed.
the clips on the back cover press against a contact which fires up the jam. My loose back cover was constantly cutting off power and then reconnecting. Just a thought.

Radio problems

I have a M3100 orange uk. i think the radio rom has gone tits up so to speak. it looses signal in the middle of calls and shows as if its lost the network, sometimes when i reboot it it says NO GSM instead of the radio version and sometimes it works.
i have tried radios
1.38
1.35
1.27
1.07
the orignal radio that comes with the orange m3100 is 1.06 but i cannot flash that to my phone as it says "device communications error". It might be something with my bootloader being 1.11 or 1.09.
there the only ones i can flash to it, but i am starting to think its a hopeless cause now. can anyone shed any light on it or is it as good as bricked?
thanks all
Smith2001 said:
I have a M3100 orange uk. i think the radio rom has gone tits up so to speak. it looses signal in the middle of calls and shows as if its lost the network, sometimes when i reboot it it says NO GSM instead of the radio version and sometimes it works.
i have tried radios
1.38
1.35
1.27
1.07
the orignal radio that comes with the orange m3100 is 1.06 but i cannot flash that to my phone as it says "device communications error". It might be something with my bootloader being 1.11 or 1.09.
there the only ones i can flash to it, but i am starting to think its a hopeless cause now. can anyone shed any light on it or is it as good as bricked?
thanks all
Click to expand...
Click to collapse
Whilst many folks think software, I often think hardware first - particularly if the usual software checks have been done - hard reset etc. So I just wonder given the intermittent nature of the problem, whether you may have a simple loose internal connector - of which there are quite a few. If it's out of warranty I think I'd have it dismantled and re-seat all connector blocks.
I begining to see more and more posts where people take apart and re-assemble and various odd problems have disappeared that a hard reset did not previously fix. When I first dis-assembled mine I was surprised how easily some of those connectors came off very easily and it does not surprise me that folks with speaker problems and screen issues trace it to loose connectors.
Mike
well as i have flashed it, its out of warrenty from HTC europe isn't it?

Losing phone network randomly

I'm having a wierd problem with my Hermes. I have the Scnaps 4.01 WM6 rom on my phone right now, but the same thing happened with Blacks rom when i was running that.
Sometimes when i turn it on, it says it has signal so i try to make a call i get operation failed, and then you see the signal drop back to searching, it finds the network and then logs back on. Same thing happens even if i dont make a call, turn on the hermes, and look at it, has signal, then 10 seconds or so later it drops to searching (it never really had signal) then logs back on, and then sms's get delivered. I've also had people try to call me during this time and it's like the phone is off.
I've tried a few different radio versions recently but same behavior with all of them. 1.54.30, 1.54.07 and currently on 1.43.
Something else weird is the fact that it seems like (I could be wrong) this only happens after having the rom on for a week or so, ie after flashing a rom, the first week or so i don't get the issue, then it slowly starts to happen - this could just be my imagination.
Has anyone else had this issue? Any ideas/suggestions welcome, thanks
Hi Ferni...
This is something that is becoming quite an issue recently
Firstly, have you made sure the SIM contacts are nice and clean and everything is fitted OK - and have you tried a different rom image? If not - try these first.
Secondly, where abouts in the world are you and what network are you on?
Thirdly - when did you install 1.54.30 and 1.54.07 - did your problems start before or after you flashed a 1.54x radio - and what radio were you running before trying these.
Finally - What other information do you have about your device - is it a herm100,200 or 300, what IPL/SPL is it.
Sorry for the 100 questions, but I'm investigating these issues at the moment as a lot of users have had similar problems especially after using radio 1.54.x as this thread discusses.
Thanks for the reply. Just read the other thread you linked to (and the threads it linked to). Interesting to know i'm not the only one.
I just pulled the sim out and gave it a rub and the contacts and put it back in. I also had a bigger battery in it, so i removed that and put the standard one back in. See if that makes a difference.
I used to run the black rom, now I run the schaps one, trying to avoid flashing it again just a pain to resetup everything you know....
I'm in Australia, on the Optus network. The JasJam is actually only sold by Telstra here, but i got one 2nd hand and use it on the optus network fine (Optus sell the Dopod). The latest radio rom 1.54.30.10 i belive is actually from Telstra - in the offical WM6 rom from them for the JasJam.
As for when i flashed which rom and when the problems started happening - i can't really say sorry, i didn't keep track. I've had the phone around 6 months, flashed it with a cooked WM6 rom (black i think) when i first got it, i probably updated the radio as well.
How do i tell if it's a 100, 200 or 300? Also not sure what SPL it is, HardSPL or something?
Tempted to flash it to the official telstra rom released recently with the latest radio, so if it does die completely i can send it back for warrenty. What do you think?
Thanks for the info - every little helps at the moment!
Firstly, yes - the radio you're running is native to the area and network and so if you're running 1.54.30.10 and it goes duff you should be covered by your warranty so don't worry. Also, it's not certain yet that there is definitely a problem with this radio so don't loose too much sleep. (Most of the problems linked with this radio that I've researched so far seem to be coming from Europe and after rolling back).
As for flashing with the official ROM, that's a decision for you - however in the cases of sudden GSM death, the phone will still boot to Windows and it is still possible to flash the OS and bootloader roms (just not the radio) so if it did go bad with an unofficial ROM on it you should still be able to roll it back - again sleep easy ;-).
As for the problem - the steps you've taken are a good start, see how it goes and keep us informed here.
It may be worth also trying to manually set your band (if applicable on your network). Sometimes problems like this can be caused by issues on the network itself and trying an alternative (maybe a friends) SIM card for a different network or even manually switching the phone to GSM (if available) can "cure" a problem (although it's a pain if you specifically need to use 3G and it's data speeds!).
Finally - to see your full device information you need to enter the "bootloader" (tricolour) screen. Hang on to this information on the bootloader screen as it can be useful if you ever encounter a bad flash.
To do this, hold the OK button on the left of your phone and the power button on the right then press the little reset button with your stylus. You will then see the model at the top with the IPL version below it and then the SPL version below that. To get out of the tricolour screen, press the reset button again. Needless to say this won't erase anything or damage your device but make sure you close your apps and save your data first
I'm not running 1.54.30.10 right now, think i'll flash back to that monday just in case.
Since changing my battery back to the original and cleaning the sim card, still having the same problem. Seems to be happening more and more often as time goes on.
I've actually already manually set my band and tried to run without 3g turned on before i posted this thread when i was doing my own trouble shooting, and it didn't help.
When flashing i normally just push autodetect which is why i don't know my bootloader info off the top of my head.
It's a HERM100 running IPL-1.04 and SPL2.10.Olipro.
I'm starting to think it only has a limited time left in it before it doesn't pick up radio at all. When that happens i'll flash the official firmware back on it, and the orig bootloader (not sure how to do that yet, will have to look it up). And see if i can get warrenty.
ferni said:
I'm not running 1.54.30.10 right now, think i'll flash back to that monday just in case.
Click to expand...
Click to collapse
What radio are you currently running? Thought it was 1.54.30.10 or did you change that the other day when trying a new ROM?
ferni said:
Since changing my battery back to the original and cleaning the sim card, still having the same problem. Seems to be happening more and more often as time goes on.
I've actually already manually set my band and tried to run without 3g turned on before i posted this thread when i was doing my own trouble shooting, and it didn't help.
When flashing i normally just push autodetect which is why i don't know my bootloader info off the top of my head.
It's a HERM100 running IPL-1.04 and SPL2.10.Olipro.
I'm starting to think it only has a limited time left in it before it doesn't pick up radio at all. When that happens i'll flash the official firmware back on it, and the orig bootloader (not sure how to do that yet, will have to look it up). And see if i can get warrenty.
Click to expand...
Click to collapse
*IF* this is the sudden GSM death syndrome then it will progressively get worse unfortunately - but it might not be that (think positive!)
[edit : removed - brainfart you answered my question] Incidentally, just updated this thread here - Look at post #60, it's a long post but there is a couple of possible things for you to try there (multiple flashing on a "chilled" phone) for users who STILL have some GSM connectivity... Might be worth a go and certainly could do no more harm... The post itself is very technical but just follow the instructions about 3/4 way through the post and ask any questions back here in this thread so things don't get too confused!
In terms of flashing your ROM - when you _really_ feel the phone may die _very very soon_ then it's worth considering flashing it with the latest OFFICIAL rom from your provider while you are able to do a full flash but don't leave it until DHL are at your door to collect it just in case you need some help!
Oh yeah... and finally for tonights post - Rolling back from Olipros Hard SPL... back to the normal, official SPL - Mr Vanx has written a fantastic guide to this here complete with illustrations - That should save you some searching
The SPL rollback, of course, should be the very last thing to do before shipping it back under warranty of course tho - just incase you need it in the mean time!
Good luck - and keep us updated - particularly if all works again (or not)forum.xda-developers.com/showthread.php?t=299070&page=32
I'm on 1.43 right now.
So what you think i should do is put my phone in the fridge (minus battery) for 10-15mins, then flash 1.43 a couple of times while it's still cold, and see how that goes?
ferni said:
I'm on 1.43 right now.
So what you think i should do is put my phone in the fridge (minus battery) for 10-15mins, then flash 1.43 a couple of times while it's still cold, and see how that goes?
Click to expand...
Click to collapse
Yes. Crazy as it sounds, if the previous radio caused "logical" bad blocks - a combination of a couple of flashes in quick succession with the PLA at a cooler temperature might recover them! (temperature issue came from the data sheet for the chip itself - Apparently more efficient writing at temperatures a minimum of 10C below ambient).
Good luck - let us know how it goes... I've got my fingers crossed you'll have a Hermes with it's wings back shortly
Last night the phone got worse, i had a missed call, tried to turn the unit on to see who it was and it wouldn't turn on, so i soft reset it, it booted up ok, but wouldn't pick up a signal.. eventually after about 5mins it did, but then it locked up. So i pulled my sim card out put it into an old phone which i'm using for now.
This morning came into work and put it in the fridge for 15mins, and flashed the latest radio firmware on it. Then flashed the latest official telstra rom onto it (getting ready for warrenty). That's just finished, only step left is to put the original boot loader back on. May test it again for a couple of days to see if i can get it to do the same thing on the offical rom/radio before i send it back. Will let you know.
Thanks for your help so far.
Ok Just another update, only a couple of hours since i flashed it and it's already doing the same thing, losing network, so going to call imate and send it for warrenty. We tried
ferni said:
Ok Just another update, only a couple of hours since i flashed it and it's already doing the same thing, losing network, so going to call imate and send it for warrenty. We tried
Click to expand...
Click to collapse
We did indeed - Ah well, at least you're covered by warranty
Mr Vanx has written a fantastic guide to rolling your bootloader back - complete with illustrations. (repeated for others who've just started reading this thread)
Yeah hopefully it gets covered under warrenty. That bootloader guide worked perfect
For anyone who cares, they replaced my radio board under warranty - I now have a new IMEI number. Haven't got the phone back yet to test to see if it's fixed.
Did you ever upgraded the Radio ROM ?
Or was it always 1.43.
My first ROM only upgrade.
http://forum.xda-developers.com/showpost.php?p=1462158&postcount=292
Yeah i had tried a few different radio roms before this. I suspect it didn't like being flashed so many times.
I am having same problem with 8525 here in south texas. currently running latest att official rom. I have flashed k 1.30, tnt special, schaps rom in last week and so as 1.41.xx , 1.48.00.00, 1.51.xxxx, 1.54.xx xx rom and all have same problme.
Don;t know what to do?
I live in WI and travel to rural areas where there is no 3g. I have experienced this same problem when I loose the signal from a 3g area to a non 3g area as it reacquires the signal. I did all the recommended fixes with bandswitch and activesync but to no avail. However, I did this about a week ago, and my problem seem to have disappeared
Go to advance config>data connections>gprs auto attach
disable it
I think the phone goes beserk when it doesn't find the 3g signal?
Try it and please report back if it works
gondalguru said:
I am having same problem with 8525 here in south texas. currently running latest att official rom. I have flashed k 1.30, tnt special, schaps rom in last week and so as 1.41.xx , 1.48.00.00, 1.51.xxxx, 1.54.xx xx rom and all have same problme.
Don;t know what to do?
Click to expand...
Click to collapse
I flashed one of the wm6.1 roms and ended up with 1.54.07 radio and was getting the "modem disconnected" error message everytime I tried to log on to the internet.
I reflashed the original WM6.0 ROM from AT&T and then reflashed my radio to 1.48 (can't go back to 1.16 because of the radio bootloader I think) and then tried to log on to the internet.
That didn't work
But then I made a phone call to my home phone
tried logging on and it worked.
Been working fine since
crossing my fingers and hoping I dodged the bullet, not gonna flash again til ATT comes out with 6.1 then if it acts up even a little I am gonna send it in for warranty repair.
I hope this procedure works for you mate.
pedro2k said:
I live in WI and travel to rural areas where there is no 3g. I have experienced this same problem when I loose the signal from a 3g area to a non 3g area as it reacquires the signal. I did all the recommended fixes with bandswitch and activesync but to no avail. However, I did this about a week ago, and my problem seem to have disappeared
Go to advance config>data connections>gprs auto attach
disable it
I think the phone goes beserk when it doesn't find the 3g signal?
Try it and please report back if it works
Click to expand...
Click to collapse
Not exactly sure where this setting is, the closest thing I could find was to install HTweakC. And now I have auto attach off. I also live in WI rural area, and 3G has been growing. Coming closer my home, and when I go to work it switches to 3G from Edge and I believe this is the biggest cause of this problem. I will let everyone know if this has helped me or not.
Thanks pedro for your suggestion. I will try that and will report back.

WIFI Problem

Do any one have the same issue like me?
I cannt turn on my WFI, I have flashed the original rom to 6.5, but still wont help.
entered the com manager turn on wifi didnt work, and go to advance got underlined wording "turn on Wireless LAN", didnt make any changes as well,
Can some one help me?
Greatdane said:
Do any one have the same issue like me?
I cannt turn on my WFI, I have flashed the original rom to 6.5, but still wont help.
entered the com manager turn on wifi didnt work, and go to advance got underlined wording "turn on Wireless LAN", didnt make any changer=s as well,
Can some one help me?
Click to expand...
Click to collapse
it would be better to ask in the special thread of the ROM you´re using. It´s neither a gerneral Blackstone issue nor one of WM 6.5
Now, I have flashed to a diffrent radio, but cant do anything as well.
Any body can help?
Wifi
I had the same problem a couple of weeks ago.
My provider changed the phone for me as a fault.
Now, all is fine.
The problem is now I have spl the unit and start up color looks weird.
How do I get back to the old spl?
so that my warranty wont be voided?
Please Help Needed here.
Matthes42 said:
it would be better to ask in the special thread of the ROM you´re using. It´s neither a gerneral Blackstone issue nor one of WM 6.5
Click to expand...
Click to collapse
you'd better to try "WiFi Monster"!
i have same problem in my hd !
Moving to balckstone
Post your question in the rom thread that you have an issue with else in the general section. Issue has nothing to do with developement
The problem is I had changed to original and cooked rom, the result is the same.
I was wondering if its really a bad hardware, how come it would work if I do a soft reset (not every time can work, even hard reset).
My apology if I had post in the wrong section.
But wifi monster did help a lot, when I turn on the wifi using the original com manager, it wont work, but when I use the wifi monster, some time will work, and some time need a reset or hard reset.
any one can help.
Greatdane said:
The problem is now I have spl the unit and start up color looks weird.
How do I get back to the old spl?
so that my warranty wont be voided?
Please Help Needed here.
Click to expand...
Click to collapse
You mention colours look weird. If I'm right you have fallen to to the old trap of using wrong HSPL resulting in a greenish discolourization. This would also affect phone & wifi.
What does your SPL say? Which rom are you using?
To get back to original SPL for warranty reasons follow this guide and scroll down to section called
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY! at bottom of 1st post
@Fallen, I am using original starhub provider for the first time, the wifi got problem, later I hard spl 156, and upgraded to energy rom, the wifi still the same problem, sometime will on and sometimes can't on. But now thanks to your link, I managed to revert back to the original SPL, and original rom. But the wifi is still the same prob. For the first few hour the wifi can on, but after that the problem comes again. I cant even tick the turn on wifi. nothing happen when I tick the wifi option.
I have another unit for comparison today, the same radio, the same rom, the same spl, and the other unit works well, wifi on when ever I want to use it.
Someone can help?
Really confusing me..
Not sure HW or SW prob.
If HW fault, the wifi wont even turn on, Am I right?
or its got something to do with the radio?
Anyone can help?
Nope - but the same happened to one of ours this month (stock Orange UK handset, never been flashed, 3 months old). Wifi refused to start, TF3D camera app unable to locate hardware (black screen, icon to select camera missing). Random device.exe error reports when trying to use the camera and once per restart from the WiFi stack. Hard resets, etc. made no difference, and Orange simply replaced it, saying it was listed on their system as a hardware issue.
If you Google you'll find groups of other people arguing over the same problem, on several different HTC handsets, and nobody's ever gotten a solution other than sending it back. Lots of "helpful" stock answers about re-flashing but the OPs reply it hasn't made any difference, and the repaired phones all seem to come back with boards and cables swopped.
Thanks for all the response, I guess I had to go to the service center for warranty claim.
Now, I found My problem.
When ever I instaled any program. the wifi will stoped working.
is that software issue?
or hard ware issue?
But when I didnt instal any third application the wifi work perfectly, I have changed to several rom including 6.5 coocked.
Last attempt before going to service center.
my wifi was working fine with Dutty's R9, and an attempt to connect to some hotspot in the mall led me to connect to no one. and back at home it is also not connecting to the home wifi.
i've edited and deleted the settings but still its not connecting . want to check other options before performing a hard reset.

Signal problem!

Helle xda
I have a signal problem on my Blackstone. Let me begin from the beginning. Firrst of all, my mom and dad had HTC HD aka. Blackstone, and I use Nokia N97. My moms HD stopped working (Touch screen issue), well she leaved it alone and now it is somewhere in the house. My dad bought Leo and gave the Blackstone to my mom. But the problem starts here, my fathers "old" phone, HD loses the signal when you are in a middle of call. First time, when my mom told me it I thinked that maybe was becouse of her SIM card, and she ordred a new one but the problem is still there. Today I got the HD from her, he bought her self a LEO Now, I have the Blackstone but it still haves the same issue, I called one of my friends and told him that I was going to try to find what the problem was with this phone so I sett him at loudspeaker and watched the phone while we was talking. So, I figured out the issue. The signal of phone studdenly falls down to zero (I mean the signal indicators) then it reases, and I can make a call again.
This phone has NEVER been modded or what you name that stuff with costum ROMs etc. I updated to the lastest official rom from HTC but the problem is still there. I use Norwegian rom, but if English one or Turkish one can fix this issue that's okay too. Sometimes it take 2 minutes before it happends other times I can talk up to 5-6 minutes. Acctualy, I have never hanged me on how long it takes my phone to "crash"
The thing is now, is this an physical or mental damage/error/issue ? (Of course, I mean the Blackstone)
And, I am sorry for my english, it is acctualy my 4th language.
I would be happy if someone here can help me about this, thanks for reading
Information:
ROM Information: 1.56.409.0 (43972) NOR
ROM date: 03/09/09
RadioVersion: 1.13.25.24
Hi there,
How old is your phone exactly? Have you considered having the device replaced if it's under warranty and insurance contract?
Other than that, you could try flashing to a different Radio version as this can resolve many issues with reception, battery consumption, call quality, GPS signal strength, heat issues, etc. You can try another radio version to compare and see if this makes a difference.
Please note: if your phone is under warranty, by flashing to a new Radio version that is different from your stock Radio version, this will invalidate your warranty. However, you can always flash back to your stock radio version of you need to send it to HTC repairs.
For more information on flashing to a new Radio version, please see this link.
Hey there, thank you for your answer!
I cannot remember when exactly I boght my phone but, it has only:
28h. 34m. and 56s. As incoming calls
and
30h. 48m. and 25s. As outgoing calls.
Maybe about 1 year old?
However, this is very low valuves, I got about 91h (Yes, I konw it sounds crazy) last month with my SE P1i.
I can try another Radio versions, can you prefer anyone ? Or is it like, I must test and find out what is best for my Blackstone ?
tuηay said:
I can try another Radio versions, can you prefer anyone ? Or is it like, I must test and find out what is best for my Blackstone ?
Click to expand...
Click to collapse
Just flash the newest radio first, and if that's no good... move down the list until you get one that works fine.
stuntdouble said:
Just flash the newest radio first, and if that's no good... move down the list until you get one that works fine.
Click to expand...
Click to collapse
....and don't forget to match rilphone to radio
Rick
p.s. ther is no rilphone for radio 1.7 so you'll need to use ril 1.4 as its the latest
Fallen Spartan said:
....and don't forget to match rilphone to radio
Rick
p.s. ther is no rilphone for radio 1.7 so you'll need to use ril 1.4 as its the latest
Click to expand...
Click to collapse
If they had read all the details in the radio thread and stickies before flashing a potential brick inducing file, they'd know all steps needed to be safer and flash correct files. Afraid i've stopped giving baby steps info to people when it's all in the stickies. I'm so jaded now...
stuntdouble said:
If they had read all the details in the radio thread and stickies before flashing a potential brick inducing file, they'd know all steps needed to be safer and flash correct files. Afraid i've stopped giving baby steps info to people when it's all in the stickies. I'm so jaded now...
Click to expand...
Click to collapse
Yeah, but mods have to be patient with all though I agree with 99% of your comments lol
tuηay said:
Hey there, thank you for your answer!
I cannot remember when exactly I boght my phone but, it has only:
28h. 34m. and 56s. As incoming calls
and
30h. 48m. and 25s. As outgoing calls.
Maybe about 1 year old?
However, this is very low valuves, I got about 91h (Yes, I konw it sounds crazy) last month with my SE P1i.
I can try another Radio versions, can you prefer anyone ? Or is it like, I must test and find out what is best for my Blackstone ?
Click to expand...
Click to collapse
no worries mate, as he guys have suggested above, try flashing to another Radio version with matching Rilphone version and stick with the Radio that hopefully works best for you.
If you have any other queries, just ask
Best Regards.
Thanks for the replies guys. I am going to try to flash my Radio a.s.a.p. and ofcourse let you know the result

Categories

Resources