Hi everyone,
this morning my jasjams microphone has just stopped working. It wont work either for calls or on the voice recorder. Connecting my bluetooth seems to work ok. Hardware or software problem??? I cant seem to find anyone having the same problem...
Cheers
Sounds like hardware. Especially if the bluetooth seems to work ok. Would look at that.
Cheers...
Related
Hi,
Can anybody out there advise me on what I need to do to get this blue trek G2 headset working properly with my XDA2 ?
It has paired OK with the XDA, I can hear fine from the headset but the mic is not responding to voice input.
I don't think it is a hardware issue with the headset, I paired it with a Nokia 6630 and it worked perfectly.
Is it a problem with the software I'm running in the XDA ? I'm running 2.02t1 WWE, 1.18.00
Any suggestions ?
Thanks
got a G2 running on my QTEK2020 with rom 2.20CHS.
works perfect.
can also use dial last number direct from the G2 by pressing the key for 2 seconds.
really works like a charm
MJW said:
Hi,
Can anybody out there advise me on what I need to do to get this blue trek G2 headset working properly with my XDA2 ?
It has paired OK with the XDA, I can hear fine from the headset but the mic is not responding to voice input.
I don't think it is a hardware issue with the headset, I paired it with a Nokia 6630 and it worked perfectly.
Is it a problem with the software I'm running in the XDA ? I'm running 2.02t1 WWE, 1.18.00
Any suggestions ?
Thanks
Click to expand...
Click to collapse
sounds like you are using handsfree mode?
For my G2, i couldn't get the mic working as well. Seems the mic only works for headset mode.
I must be being stupid !! I cannot get this this thing to respond to voice. It connects the to the XDA perfectly, the last number redial works a treat, the headset icon appears next to signal strength indicator, I can hear through it fine, just nobody can hear me. I've checked the mute function that works fine and isn't enabled. I've hard reset the XDA, rediscovered the G2 but still no voice. Any f urther suggestions ?
MJW said:
I must be being stupid !! I cannot get this this thing to respond to voice. It connects the to the XDA perfectly, the last number redial works a treat, the headset icon appears next to signal strength indicator, I can hear through it fine, just nobody can hear me. I've checked the mute function that works fine and isn't enabled. I've hard reset the XDA, rediscovered the G2 but still no voice. Any f urther suggestions ?
Click to expand...
Click to collapse
The G2 is working properly??? Have you tried it with other phones? Perhaps it has the problem...
I have the G2 as well and it works fine with the 2020...
I am convinced the G2 is working correctly, it works fine with another BT device. Do I need to upgrade my XDA2 to 2.20 CHS ??? or is there a registry tweak I need to make within 2.02t1 WWE ? to get the G2 to work ? If so where can I find it on the forum ?
MJW
Hi guys !
I tried to check the forum for this problem but I only could find something scarcely useful.
My Qtek 2020 has the microphone which seems to be completely dead during a phone call. The recorder works fine, as well as the speaker. I can only get a regular operation with a BT headset. The external (wired) headphone is still dead but only regarding the microphone.
I' ve been reading some posts about the phone connector: do you think I should open the phone and check for that or what else ?
Any suggestion is greatly appreciated.
Thanks everybody in advance. Oberdorfer.
dead mic in phone mode
Yes, I have XDAII, I have exactly the same problem as oberdorfer.
The mic is working fine in recorder. But not in phone mode.
I have tried replacing the mic, but no luck.
I tried searching thru the forum, but nothing. Anyone can help?
Ok, Here is my situation, I've got a att 8525 with the newest Korean WM6.1 Rom on it. the button area might have gotten wet... but the buttons work great. it will record my voice with "voice recorder". But, when I'm in a call the other party cannot hear me. i have tried speaker phone as well and this doesn't work either. however my bluetooth device does work well,,, well as well as a bluetooth headset works. any hints on what could be causing this?
I have flashed a couple of different roms including starting over with the ATT version. i also have active sync issues, the phone will not sync with the usb and i have to reinstall the usb drivers like every other day.... any hints on this could be useful too.
thanks
thelman
i had a similar issue, sometimes i had to softreset the phone because the mic doesn't work in phone mode but can record audio in the recorder note software
it's so random, so i think it's a software fault, any idea?
Hello,
I'm trying to use PortSip as a SIP client as mentionned in other posts (http://forum.xda-developers.com/showthread.php?t=508715).
www.portsip.com
Tried both on wifi and 3G:
- I can hear the voice of the contact I called pretty well
- But my voice is not understood by the other side: it's all cut (as if the line was really busy and got loads of delay / lag)
I also tried different wifi, some of them were quiet fast...
I even tried to call on the same wifi network with a SIP client on my laptop, and this call was perfect.
So, I guess the problem comes from my HTC HD2 (leo)...
Does anybody encounter this kind of problems?
What should I try?
Thanks.
I finally installed the WM VoIP cab. Everything's working fine now, except that the sound comes out the external speaker.
So, I installed AudioRoute, and the sound now comes from the "ear" speaker... but the volume is really low.
Any idea on how to boost it?
I could not find a solution to this problem after searching, if there is one please direct me to it. Thanks.
I have a stock Samsung Galaxy S4 with Android version 4.4.4 install on AT&T network. When using my plantronics bluetooth headset with Ok Google detection set to activate from any screen I lose all phone audio over the headset after the first call (ie. the first call works fine but after that I cannot hear anything) Music audio works fine. If I deactivate the detection from any screen and re-boot the phone I get the audio back. I tried the same headset on my son's new Galaxy note and it worked with no problem.
I've read several posts with similar problems but so far no solutions. Obviously, there is a conflict, I'm guessing with Ok Google and the headset both using bluetooth but so far I can not find information on resolving it.
Has anyone found a solution, other than not using Ok Google detection from any screen?
Thanks, JH