Hi.
I tried to call by the VoIP, and I installed some software like SJPhone, GoSIP... and SIP Config tool for WM6. Nothing works... But it's not my problem !
Now, my Touch Diamond doesn't recognize my GPS device. TomTom doesn't works !! It's a big problem for. Do you know how to repair that ?
Thanks.
Contact/calendar/tasks/notes backup and Hard-Reset... The simpliest way...
Related
Hi all,
i have a problem with OziexplorerCE and Qtek2020 for connect py BT48 bluetooth gps. With TomTom it's ok, but all other (ozi, gpsce, ....) i can't find the gps.
Can you help me.
Thanks
Eric
This is a know issue with Oziexplorerce (see their website).
Pocket Blutetooth Tools is supposed to fix this.
Thing is that everything else now works with bluetooth with my 1.72 rom and I dont really want the Pocket Bluetooth Tools on my device anymore . . . .
Maybe there are other solutions???
I have the same problem
TomTom it's ok, but Ozi can't find the gps.
Is OK with others GPS software like GPSDash and Vito Navigator.
I'm afraid to install Pocket Bluetooth Tools because most users have found this very satisfactory and some have suffered problems such as the re-introduction of bonding problems, decreased device stability, and the necessity to hard reset to remove it.
Thanks
I know that Garmin said that there GPS 10 is not compatible with 9100.
But I manage to make some settings so i could pair the units together.
Only one problem.. when I try to install basic map and other maps my computer wont find the device.
It says that the unit is not connected...
My Qtek S100 workes directly.. but I have just upgraded to 9100 and would like to get it to work..
Any suggestions?
Not much for help here with me, buddy.
I found that most of the gps software I had tried would not allow me to use my BT GPS...finally, Pocket Streets allowed me to set the com port to what I was able to set as the outgoing port on the 9100...it works fine....
I have a lot of useless mapping software now, and Pocket Streets isn't all that I would hope, but it will do for now...
I've heard rumors, on here, I think that TomTom will work, but I don't have that kind of money...
If you can get them to pair, that's great, but the software you use will need to be able to see the GPS at the outgoing port that you create on the 9100...
hope this helps a little.
Installing IGO on my WIZARD everything was fine but when I tried to connect it (via bluetooth) with NOKIA LD3W GPS can not connect it.The WIZARD see it ,enter the code to connect and then can not connect it.Compatibility problem?
I have the same Nokia LD-3W adapter and a Prophet. If somebody can help, I have the same problem. Pairing is ok, selecting Serial Port ok, but in iGo there is no connection with the device. Anyway, when I manually change the port in GPS setting page, there is a LED that turns from red to green and flashing. Any ideea?
Thanks!
Hi
I have the same Issues with my Vodafon VPA II Compact.
I Installed the latest ROM from Vodafon - but no help.
Any Hacks? - the Mouse is working fine with my Laptop.
you may have to make a secure connection for it in bluetooth settings.
i found that worked on the old rom...but doesnt on the AKU2 roms.
Problem solved! :lol:
In the last version of iGo (30.05.2006) they solved this problem! U just take this from here and copy it in c:\program files\igo. Works excelent!
Remember! Bluetooth ON, pair the device, select COM port, then in iGO settings select NMEA protocol, 38400 speed, select manualy the port that u selected in Bluetooth manager and non-secure connection. Then just turn off and then back on the receiver and that`s it!
Good luck!
Hi
I upgraded my Firmware to the latest and with the TRICK described it is fine
BR
Daniel
doesn't work :-( i found my ld-3w in comm manager, was no problem, but i can't connect with any gps soft. what's wrong? my old pda hp 2210 (and 4150 also) works fine...
How to make it working
jeenik said:
doesn't work :-( i found my ld-3w in comm manager, was no problem, but i can't connect with any gps soft. what's wrong? my old pda hp 2210 (and 4150 also) works fine...
Click to expand...
Click to collapse
I've got the same combination (Wizard - Mr. Clean AKU 2.3 ROM + Nokia GPS, using TomTom) and it's working without problem. Pair it, create Outgoing COM port but uncheck "Secure connection". Don't use WM5 GPS settings to share the port.
Radek
great! radku thank's it helped! i was still trying to set wm5 ports and when i switched them off it works!
Hi
now i am on IGO and a Hermes (t-mobile vario II) and again the **** will not work...
My Custom GPS Application works.
IGO not. - seems like it doesn't like the protocol or something.
BR
Daniel
Then try either the trick above, it worked with me.
I have Nokia LD-3W and Hermes problems with Garmin XT
melvincz said:
I've got the same combination (Wizard - Mr. Clean AKU 2.3 ROM + Nokia GPS, using TomTom) and it's working without problem. Pair it, create Outgoing COM port but uncheck "Secure connection". Don't use WM5 GPS settings to share the port.
Radek
Click to expand...
Click to collapse
Where do you find the setting to uncheck secure. It works fine with Microsoft Livesearch but not with Garmin XT Software. Maybe it has something to do with my settings. I am using WM6.1...help.
Hello! on my ita w5 trinity i can use gps with tomtom (htc bundle), and works fine.
But, when i try to use internal gps with other sw, like vito astro or gps utilities, i can't found it! so, there is some way to activate, monitor internal gps or there is some option to use ??
sorry for my poor english...
thank's to everyone...
trinity, rom 1.23.408.2, radio 1.38.00.11
The GPS is available on COM9.
I am working on a little piece of software that uses the GPS. Luckily, I found out that the GPS can be accessed through COM9. However, if you do a software search (I use VB.NET), then COM9 is not listed as available. So, it might be that other software also don't show this port.
CD
hi try looking on the forum for a programme called "GPS TEST"
Thank's to all, i've found com9, after a lot of tries......
it works with more sw.... weeelllll !!!
Hello, I've got problem with my bluetooth gps (nemerix).
When I'd like to connect to my pda first I'm looking for new devices in bluetooth manager, then parring and seeting outgoing port. And then I'm starting my Navi aplication. It works.
But, when I'm shutting down gps device, turning off buetooth in pda and start it again I've to all tasks mention above - searching, parring and so on. In my opinion,when it's added to my bluetooth devices and properly parred once it should work every time I'd like to use it, however gps device doesn't communicate with pda.
It's quite annoying, why I cannot just start my gps device and my navi aplication and run - I spend a minute with setting connection.
Do anybody know how to fix my problem?
Are you using a custom rom? If so it could be a problem with the rom you are using. I've had the same problem in the past and a different rom fixed the problem.
I've got now Schaps_WM6Pro_Hermes_4.31_WWE_Full, which rom are you using -RanDomIze Final Storm v2.10?
Have you tried "Pocket Buetooth Tools"? You can find it here: http://bluetooth.i-networx.de/download_e.html
I hade major problem pairing my BT-gps to use with Tomtom before I found BTTools.....
I'll try, thanks for advice
Kladden said:
Have you tried "Pocket Buetooth Tools"? You can find it here: http://bluetooth.i-networx.de/download_e.html
I hade major problem pairing my BT-gps to use with Tomtom before I found BTTools.....
Click to expand...
Click to collapse
great tool thanks