Wizard problems with NOKIA GPS receiver - 8125, K-JAM, P4300, MDA Vario General

Installing IGO on my WIZARD everything was fine but when I tried to connect it (via bluetooth) with NOKIA LD3W GPS can not connect it.The WIZARD see it ,enter the code to connect and then can not connect it.Compatibility problem?

I have the same Nokia LD-3W adapter and a Prophet. If somebody can help, I have the same problem. Pairing is ok, selecting Serial Port ok, but in iGo there is no connection with the device. Anyway, when I manually change the port in GPS setting page, there is a LED that turns from red to green and flashing. Any ideea?
Thanks!

Hi
I have the same Issues with my Vodafon VPA II Compact.
I Installed the latest ROM from Vodafon - but no help.
Any Hacks? - the Mouse is working fine with my Laptop.

you may have to make a secure connection for it in bluetooth settings.
i found that worked on the old rom...but doesnt on the AKU2 roms.

Problem solved! :lol:
In the last version of iGo (30.05.2006) they solved this problem! U just take this from here and copy it in c:\program files\igo. Works excelent!
Remember! Bluetooth ON, pair the device, select COM port, then in iGO settings select NMEA protocol, 38400 speed, select manualy the port that u selected in Bluetooth manager and non-secure connection. Then just turn off and then back on the receiver and that`s it!
Good luck!

Hi
I upgraded my Firmware to the latest and with the TRICK described it is fine
BR
Daniel

doesn't work :-( i found my ld-3w in comm manager, was no problem, but i can't connect with any gps soft. what's wrong? my old pda hp 2210 (and 4150 also) works fine...

How to make it working
jeenik said:
doesn't work :-( i found my ld-3w in comm manager, was no problem, but i can't connect with any gps soft. what's wrong? my old pda hp 2210 (and 4150 also) works fine...
Click to expand...
Click to collapse
I've got the same combination (Wizard - Mr. Clean AKU 2.3 ROM + Nokia GPS, using TomTom) and it's working without problem. Pair it, create Outgoing COM port but uncheck "Secure connection". Don't use WM5 GPS settings to share the port.
Radek

great! radku thank's it helped! i was still trying to set wm5 ports and when i switched them off it works!

Hi
now i am on IGO and a Hermes (t-mobile vario II) and again the **** will not work...
My Custom GPS Application works.
IGO not. - seems like it doesn't like the protocol or something.
BR
Daniel

Then try either the trick above, it worked with me.

I have Nokia LD-3W and Hermes problems with Garmin XT
melvincz said:
I've got the same combination (Wizard - Mr. Clean AKU 2.3 ROM + Nokia GPS, using TomTom) and it's working without problem. Pair it, create Outgoing COM port but uncheck "Secure connection". Don't use WM5 GPS settings to share the port.
Radek
Click to expand...
Click to collapse
Where do you find the setting to uncheck secure. It works fine with Microsoft Livesearch but not with Garmin XT Software. Maybe it has something to do with my settings. I am using WM6.1...help.

Related

another MS bluetooth COM-port hack

Occasionally I've found a site: http://support.dell.com/support/dow...egory=0&os=PPCA&osl=en&deviceid=4351&devlib=8
this update was designed for Dell Axim X5 PPC only, but after installing it on my Imate I've found a "com ports" tab in the Microsoft Bluetooth settings. Can someone test this update, maybe it would be useful for those who have problems with BT GPS? I cannot test it myself yet.
interesting, There is a new dll (BthVCOMMgr.dll) and some reg settings ( HKLM/sofware/microsoft/bluetooth/serial/config) in the CAB.
I did not know the Dell also uses the MS BT stack for its BT extension pack!!!
Might be worthwhile knowing how users of the Dell cope with this BT Stack . . . .
Hey, it works. Great
I tried it with my Fortuna BT Clip-on and TomTom 3 and it worked with
virtual COM-Port 7.
Before I needed the Pocket Bluetooth Tools to get my BT-Mouse work with TomTom.
Greets
Andy
MDA II - ROM 172.01GER - Radio 1.17.00 - ExtROM 1.72.751 - T-Mobile
Would like to know:
WHAT works (especially when 'it' didnt work before)
WHAT is your ROM version?
WHAT is your ROM origin?
Do you use BT with a BT BPS and TomTom3?
anmet said:
Hey, it works. Great
I tried it with my Fortuna BT Clip-on and TomTom 3 and it worked with
virtual COM-Port 7.
Before I needed the Pocket Bluetooth Tools to get my BT-Mouse work with TomTom.
Greets
Andy
MDA II - ROM 172.01GER - Radio 1.17.00 - ExtROM 1.72.751 - T-Mobile
Click to expand...
Click to collapse
Hi,
please can you explain me how to configure-use it step by step. I would like to use my TomTom BT receiver with other apps. As you know you can do it normaly, but If I create a virtual com port mybe...please help me, how to do it? Do you think it can solve the problem reletad to BT headset profile too? I mean that will I use BT car kit and BT headset both?
Thanx a lot!
@edsub
File comes into compressed format. To install it, is it enough to extract the file and copy build.PPC2003_ARM.CAB on my Qtek2020, or should I copy build.ini and register.bat files too?
I have native Qtek2020 BT stack and the last ROM 1.72 ITA...will it work?
Thanx again!
To install it, is it enough to extract the file and copy build.PPC2003_ARM.CAB on my Qtek2020
Click to expand...
Click to collapse
Yes, that's enough.
You just pair your BT-Device as before, after that you will be asked if you wanna give it a COM-Port. Do that like you see at the Screenshot.
That's it. Wish you success
Greets
Andy
I was trying to to use GPSDash, by setting a virtual com port to TomTom BT receiver...but it's hard to find the right combination between COM port and Baud Rate, working for my Qtek2020 (1.72)
I also have tried to uninstall the BT Dell patch (that seems to fit perfectly to Qtek 2020), and tried to connect GPSDash via COM5...but with no positive results.
So:
1-can someone suggest me a GPS SW to test with BT Dell patch and TomTom BT, easy to configure?
2- do you think I can use BT Dell patch to assign a virtual COM port to my BT CarKit, in order to let it work, beside BT Headst? Which com port usually is assigned to BT headset and which virtual one should I assign to BT car Kit, to test if it will work?
Thanx again!
From what I read here is the only thing different this tool allows you to manually select the BT-assigned COM port. Without this s/w COM4 is selected for inbound and COM5 for outbound . . . .
I've tested it on my 1.72.00WWE
You CAN assign ports.
Only the BSP: ones succeed (looks like all other ports allready exist)
It did not benefit me when using Tom Tom GPS: I was hoping to be able to use the 'Bluetooth GPS' portsetting wich would prevent my MDAII from almost freezing when I start Tom Tom navigator with the GPS out of range (currently GPS uses COM5 which is fine AS LONG AS the GPS is in range and switched on)

Bluetooth GPS COM Port problem

Hi, I have a brand new XDA Mini, but with Qtek S100 WWE Rom 1.12, and I bought a Bluetooth GPS, Xaiox NAVOne 2.0...
Bluetooth manager can see the gps without problems, but my Medion2004 Navigation Software says, no GPS is avaiable.
I've already read in the users manual, that GPS needs Com8.
As I see in Start -- Settings -- System -- Bluetooth settings, xda mini has Com5 for outbond port, and Com4 for inbound port.
How can I change ? No program is running, if I check.
Please, help me, thanks.
Nobody has a good idea ? I have already tried the Pocket Bluetooth Tools, it can give a solution, to change COM port 5 to COM port 8, my bluetooth gps requires this port.
BUT, this screenshot appears only a small moment (0,1sec) when I install NAVone2.0 gps...
I installed this gps 100 times, everything is the same.
Can you suggest me another bluetooth tools application?
The problem is simple, to change COM 5 to COM 8.
Thanks in advance.
You could try installing gpsgate from franson
http://franson.com/gpsgate/
change software!
I think you should try change software. I have tomtom 5 to my s100 and it works just fine..

Orange SPV M500 Tom Tom Navigator/Bluetooth GPS Problem.

Hi there!
I've recently got a M500 and I have a cellink BTG-7000 Bluetooth GPS Reciever.
I can pair the M500 & Reciever but when I go into the Tom Tom Navigator it does not find the Reciever when I go to Preferences. (there are com ports there but no matter what port I select it doesnt find it)
Any ideas why?
Hi,
I had simular probs. after pairing with another BT device. Just paired with the GPS & all was fine, so
- make sure the GPS is the last paired device
- create a com port for the GPS
- try upgrading radio
- get another BT stack
I'm having the stack from here http://forum.xda-developers.com/viewtopic.php?t=33532 but can't say it solved it or not. But it works & I can use the BT GPS & a BT earpiece at the same time.
Good luck, M
How do I create a com port for the GPS? I dont seem to have that option.
My BT stack asks me whether to create a com port for it when I pair with my GPS. Also under the BT connection settings I've got a tab which read 'COM ports'.
Cheers, M
Mine doesn't have any of these options, strange?!
I guess thats the problem, it seems my M500 doesnt let you manually assign a port.
Any ideas on a fix then?
I am on radio 1.12 & got those options from radio 1.11 on. You can try the updated BT stack from the thread 'O2 mini new BT stock'
Maybe that helP as well, otherwise upgrade your radio.
Cheers, M
Take the wired gps, baudrate 9600 en after that test some comports. It takes a while when TT detects the receiver, so hold on a bit. Most of the time it is comport 4 or 5.
what version are you using, i had similar problems,
I found that if you install version 5.1 or 5.2 straight on then it will not find the gps.
i installed the original 5.0 from cd. then got GPS working. TomTom may ask you to reset the device to configure gps [it did for me].
i then upgraded to 5.1 then 5.2 and everything works perfectly.
what version are you using, i had similar problems,
I found that if you install version 5.1 or 5.2 straight on then it will not find the gps.
i installed the original 5.0 from cd. then got GPS working. TomTom may ask you to reset the device to configure gps [it did for me].
i then upgraded to 5.1 then 5.2 and everything works perfectly.
I initially had the same problem with my BT GPS device and tomtom 5.0, but pairing them just before loading up tomtom and setting it to COM 5 and then waiting a while seemed to solve it!
Good luck!
Got-it!
Duh!
I must have missed something here, so I'm posting this for the few people who are thicker than I must be;-
When setting the BT com port under 'Bluetooth settings', the outgoing com port selection window is blank.
HOWEVER, choose 'settings>system>bluetooth setting' and voila!, that is where you see that COM5 is pre-chosen. (Why there needs to be a double-entry is another matter?)
Hope this saves someone some time.

Universal + BlueTooth GPS problem, help

Dear Htc fellows,
My bluetooth GPS is working strange on my Universal, but on iPaq with
WM2003 works as a charm. The BT GPS is new Solar GPS with new Mediatek
chipset.
It's not working with iGo 2006 and even not Tomtom 5 or Tomtom 6.
I can find the BT GPS in BT manager, I can pair it, but I dont know why,
it needs a pass key even if it shouldn't. Then when I explore it's
services, The popup come again asking me if I will allow external BT
device to connect to my Universal and it come asking passkey again (Why?).
I can't even enter an empty passkey (bt device doesen't require it). After that I have successfully paired the device. I can add it's serial port to enumerate on com ports 8 or 4.
When I start Tomtom, it doesent detect the device at all. If I use iGo, it detects, gets datas and disappear, it's allways appeared for 1 second and then 5 seconds not. No matter Which bitrate I set (device is written to be 9600) it needs to be in NMEA protocol, not SIRF.
When I use some freeware GPS programs, it seams to be working ok, it shows satelites and it's not disappearing.
What can I do with that???
I have some idea that it's probably about WM5 and it's security....
How can I setup com security in registry? can I set the port speads manually atd... I had performed a hard reset and it still don't work. Can ROM update or AKU update help me?
Does anyone have some idea what should I try now?
O2 XDA EXEC:
Rom: 1.30.107
Radio:1.09.00
P:42.42.P8
BT GPS: model: BT 2.5MR
made by f-tech.com.tw
Thanks;
Shef
Could you find a solution??
Hi,
I have the same problem exactly and could not find anything on the net. Did you solve your problem?
well ...
i know that there is a problem with GPS and WM5 and so there is this patch which i install every time i hard reset .....
the guys i bought MY GPS from gave me this ... and they are pretty knowledgable .....
it works well ....
try it !
tried
My OS version is WM2003 but tried anyway.. Did not work.. can there be version for WM2003??
did you ?
did you define an outgoing com port for the device (com 4 for example ?)
com port definition
well, igo finds the device an COM 6 actually, it connects too.. but stays connected just for a second, then again and again..
I installed GPSGate and created a virtual com port 7. I manually configured the GPS receiver connection to COM 7 on igo.. But all the same.. :
do you advice another way?
one other thing the device works with navigon 5.0 and tomtom 6.0 smoothly, no problem.. only igo..
well...
IGO is CRAP ... that is well known .... lots of bugs ...
i am sorry .. i do not know how to solve your problem...
but i suggest using destinator 6 ..... (that's what i use) ....
simple ... nice looking .... big buttons and able to navigate to your contacts directly (especially useful if you have Phone Edition)
oh ... and ... works great !
I got the Holux GPSlim 236 GPS. I can pair the GPS with Universial. But I cannot set the com port at all. A pop up window always say the com port (I tried everyone of the ports) is not available.
Any one got a solution, does the GPS bug fix help ? and what does it fix ?
Might seem a bit obvious, but have you tried the code "0000" when pairing your device?
Once paired...did you define an outgoing serial port on "Bluetooth Settings" menu on your WinCE?
I have a royaltek bluetooth GPS and it's been working well with TomTom[5|6]...I use '0000' as passkey (default on many 'non-interactive' devices), once paired I clicked on 'COM Ports' tab and defined a new outgoing port, the wizard should list the GPS as an available device to create a COM port so I used it and I got a 'com0'.
Once the outgoing port was created I had to tell TomTom to use the new 'com0' and worked like a charm
It's been working since TomTom 5.21 (previous versions didn't work).

WM6 occupied COM ports - Help please!

Hi,
I have a problem with configuring GPSGATE on a PPC.In the BT menu I can select for outgoing COM port only COM 0,6 and 8.GPSGATE sees in the input tab the ports COM 1-4,7,9.When I mamually make it COM8 the app says the port can't be opened.Tried to remove all BT paired devices and com ports from BT settings menu but still the app is not seeing the other ports.
How to "free" up the ports 6 or 8 for gpsgate?
I searched the forum for this but found nothing relevant.
Other info:
HTC Blueangel PPC with WM6 Rom (freshly hard reseted, ROM release from last month by xplode)
GPSGATE 2.6.0.325
Nokia LD-3W GPS receiver
Thank you!
Hi,
i have a problem with getting memory map to work! i am running tt7 fine but cannot get memory map to open the port th BT reciever is set to...driving me completely bonkers. I had both working with wm5. I could set a incoming and outgoing port but no such look in wm6.10.00.
any quick solutions would be greatly apreciated...ta.
Hi,
With tt6 & tt7 I made a little success because if you let these programs for a while after some time (usually 1-5 minutes) suddenly they connect to the Nokia LD-3W and work fine (Outgoing COM port is set to whatever is free and GPS Inter.driver is set to off - if I'm not wrong it doesn't matter at all for tomtom what is set up in the Inter.driver, only the BT setup is important and that the devices have to be paired).
With iGO 6 & 8 I did not manage to connect it to the Nokia LD-3W (I think it's because the LD-3W looks for sats after having a BT connection). I used the iGO8 with my personal Holux M-1000 receiver and it worked, but only if the receiver had a stable sat connection (fortunately it searches for sats when it is switched on, and does not wait for a BT connection so I assume the problem might be with the driver of iGO, but I'm not an expert).
I don't know the Memory Map application but you should give a try to the GPSGate application. Maybe it solves your problem.
Cheers!
PS: I forget to mention that with the WM5 ROM (I don't remember which one) iGO6 worked superb with the Nokia LD-3W but the WiFi was a mess so I had to shift to WM6 and since then it's a never ending story
When this worked iGO8 was not available. But I'm a witness it worked...

Categories

Resources