Database Users

Wizard Hangs..is dead like a BRICK

Hi Wizards,
Im having a Qtek 9100 and using a ROM cooked by Mfraazz. The phone application seems to hang and i have to reset in order to make it functional...the problem does not end here. When the phone boots up, the start menu bar is not visible...I have to hard reset my device 3 -4 times..thats whn the start menu is visible..
I have only one application(Good Link) running...plz help me guyzz

it is time to donate to XDA-developers!

Just reflash the ROM, friend. Seems to be a bad flash to me.

deleted this post

wiztek said:
Hi Wizards,
Im having a Qtek 9100 and using a ROM cooked by Mfraazz. The phone application seems to hang and i have to reset in order to make it functional...the problem does not end here. When the phone boots up, the start menu bar is not visible...I have to hard reset my device 3 -4 times..thats whn the start menu is visible..
I have only one application(Good Link) running...plz help me guyzz
Click to expand...
Click to collapse
try another cooked ROM or an official one and see if problem persists...

the mfrazzz crossbow reloaded made my kjam hang on the bootloader as well n my fone cant b detected by active sync either plz help how m i suppose to flash another rom wen active sync itself dont detect my rom

z0d1ak said:
the mfrazzz crossbow reloaded made my kjam hang on the bootloader as well n my fone cant b detected by active sync either plz help how m i suppose to flash another rom wen active sync itself dont detect my rom
Click to expand...
Click to collapse
Rom has got nothing to do with Activesync not detecting your phone,it's most probably the problem of Activesync application or your USB cable not establishing connectivity.Check the usb connectivity for problems.To verify the connectivity,check if it gets charged via usb connection.
secondly,get your phone into bootloaders and connect it to your Pc via usb cable,see if usb appears at the bottom of the bootloader mode (multicolor screen),if it then it's connecting.
You don't need Activesync for flashing a Rom to your phone,it's done via usb cable,and while flashing activesync is automatically turned off by the Ruu.So if you are able to establish connectivity via usb cable in bootloaders (multicolor screen) you can flash to any Rom.
Cheers

XDA11i Serial V1.01

Hi all, Hopefully some wise person can assist me.
I downloaded a ROM update for my XDA11i from this site :Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed which was highlighted for a Alpine. However on running the update you get a picture of a MDA and a message "The ROM upgrade utility does not design for your device. Please get proper ROM upgrade utility and try again"
Unfortunatly my XDA11i is now stuck on a blank screen with Serial V1.01 and is not recognised by activsync or My computer. However in the cradle the screen shows USB V1.01
I have tried installing the official O2 ROM update: AP_O2UK_11100_169_10000_ShipXdaIIi but get the following message Error 101: connection error. I assume because my XDA is not recognised by Activsync.
I have spent days trawling the forum and trying the various solutions to no avail. Most of the links are dead as in archive.
1. On reset and hard reset the serial text only dims.
2. I tried the process posted by CelticLo and copied a ROM image to a SD card, however again on hard reset the sserial text only dims.
Any assistance would be very much appreciated.

Have you tried updating to the latest version of Active Sync on XP
or following the guide for Vista

Take off battery. wait for about 10 hrs. put back battery and switch on the power.

Thanks for the tip's
I have tried Activesync on XP and Vista still does not work.
I have removed the battery for two days and recharged it through the cradle, on returning the battery and switching on. It returned to the serial screen.
I tried flashing with the following rom : [Maxishare_net]alpine-1.11.171-radio-1.04-bluetooth-patched-camera-fixed again i get the message it is the wrong ROM??
I can not understand why I keep getting the wrong ROM message as it is definetly a XDA IIi PH10C
thanks anyway

Furkinl said:
I have tried Activesync on XP and Vista still does not work.
I have removed the battery for two days and recharged it through the cradle, on returning the battery and switching on. It returned to the serial screen.
I tried flashing with the following rom : [Maxishare_net]alpine-1.11.171-radio-1.04-bluetooth-patched-camera-fixed again i get the message it is the wrong ROM??
I can not understand why I keep getting the wrong ROM message as it is definetly a XDA IIi PH10C
thanks anyway
Click to expand...
Click to collapse
erm u are trying to flash on a pc running vista?? thats your problem, u cannot flash on a vista pc, xp home/pro ONLY!

Thanks for the advice, tried on XP and it worked fine, it would seem that activsync was not required in this case. At least my XDA is ALIVE for now.
many thanks

You simply could revive it again by Resetting it via the stylus

thnx 4 all the soloutionsss
i had same problem , but once i tried it on xp, its works for me, my ppc now is refresh installed,
thnxx

qtek 2020i
for information the french rom is available on this place http://www.planete-htc.com/index.php?mod=download choose dangaard section there is two files to download
1. choose 2020i dangaard rom
you can not use it
2 download the radio file
it contains an exe called upgradeut make it in the directory of your dangaard folder and you will be able to flash it
it work also for pda stuck in serial usb
voila

qtek 2020i
radio file 1.04 two mega

do a hardware resett and it should be the phone back to defaults

XDA IIi V 1.01 Serial /USB
Hello,
I tried to update my XDA IIi from a new rom version found at o2.ie website but my XDA IIi is stuck and showing Serial on top and v 1.01 at botom. When i attach it with cardle it shows USB instead of serial.
I have tried Almost everything that i found on this forum in last three days.
Hard reset / soft reset/ new installation using different version etc.. but nothing worked for me..
Now I am really confused and can't find what to do.. Can any one from XDA gurus/ developer help me and sumarize what should i do?
Thanks in Advance
Zeeshan

Yes, i have the same problem i did exactly what was done above me pls can someone help!!!!!!!!!

Furkinl said:
Hi all, Hopefully some wise person can assist me.
I downloaded a ROM update for my XDA11i from this site :Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed which was highlighted for a Alpine. However on running the update you get a picture of a MDA and a message "The ROM upgrade utility does not design for your device. Please get proper ROM upgrade utility and try again"
Unfortunatly my XDA11i is now stuck on a blank screen with Serial V1.01 and is not recognised by activsync or My computer. However in the cradle the screen shows USB V1.01
I have tried installing the official O2 ROM update: AP_O2UK_11100_169_10000_ShipXdaIIi but get the following message Error 101: connection error. I assume because my XDA is not recognised by Activsync.
I have spent days trawling the forum and trying the various solutions to no avail. Most of the links are dead as in archive.
1. On reset and hard reset the serial text only dims.
2. I tried the process posted by CelticLo and copied a ROM image to a SD card, however again on hard reset the sserial text only dims.
Any assistance would be very much appreciated.
Click to expand...
Click to collapse
Where can I download this rom?
Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed
Thanks in advance
Chet

look and lern
put qtek 2020i in stativ (conect to pc via usb)and push power ( on screen will apear USB and v1.01), and you dezarhive :astel_wwe_11100_112_10200_ship, and doble klik on AlUpgradeUt and bios at ppc wil be update !!!!! This is all, the ppc will be now reinstaling, be patient and wait until will be reinstaled (25 min)

Activesync can't detect my Hermes >.<

Hope you can help me..
I just bought a Softbank HTC X01HT, when i connected it to my PC, Microsoft Activesync cannot detect it. But my HTC is charging.
What I did:
1. I am using a new USB cable, tried another USB cable = no success.
2. Tried to sync to another PC = no success.
3. Uninstalled Microsoft Activesync, reinstall Activesync = no success.
4. Did some research, uncheck "Enable advanced network functionality" = no success
5. Hard Reset = no success
6. Connection Settings --> Connect = "Your device was not detected"
COM 1 = Available
COM 2 = Not installed
Infrared Port(IR) = Not installed
USB = USB is available
and it gives the beeping sound (sound you get when you plug in your USB) but nothing happens after.
Btw, im using WM 6.1 Pro.
My Bootloader shows:
HERM200
IPL-1.04
HERM200
SPL-2.03
I'm losing hope.. T_T Hope someone can help me. Sorry for being such a noob. >.<
Thanks in advance!

xtrange but...
how canyou have 6.1 even if your not hard spl or made SSPL?
So this issue comes with many devices....
try to restart your pc and sofreset your device too at the same time let them boots together. plugged.
Try to reflash a new rom an original shipped rom for hermes
and tell us how is it going... if not your USB port is damaged or was the OS...
If you are not hard SPL so make the steps to unlock but first of all flash an original.
Hope is the last thing to kill MEN!!!!

+ Que PPC said:
how canyou have 6.1 even if your not hard spl or made SSPL?
So this issue comes with many devices....
try to restart your pc and sofreset your device too at the same time let them boots together. plugged.
Try to reflash a new rom an original shipped rom for hermes
and tell us how is it going... if not your USB port is damaged or was the OS...
If you are not hard SPL so make the steps to unlock but first of all flash an original.
Hope is the last thing to kill MEN!!!!
Click to expand...
Click to collapse
Thanks for the reply sir..
I bought the unit 2nd hand.
I tried to soft reset the PPC together with the PC but still no luck. T_T
Can you give me the link for the original ROM for Hermes? I have no idea what is it. =X

ROM update freezing

Hi guys,
A few months ago I updated from O2s 6.1 to a 6.5 ROM.
Now I want to go back the O2 ROM but the update freezes at 34%. The popup box says it lost connection with the phone.
I tried installing HardSPL but it didnt help. So I tried a hard reset but now I just get a RGB screen with
POLA200 MFG
SPL-2.20.OliNex
CPLD-2
Any suggestions in sorting my problem would be appreciated
Many Thanks

rikpotts said:
Hi guys,
A few months ago I updated from O2s 6.1 to a 6.5 ROM.
Now I want to go back the O2 ROM but the update freezes at 34%. The popup box says it lost connection with the phone.
I tried installing HardSPL but it didnt help. So I tried a hard reset but now I just get a RGB screen with
POLA200 MFG
SPL-2.20.OliNex
CPLD-2
Any suggestions in sorting my problem would be appreciated
Many Thanks
Click to expand...
Click to collapse
First of all check your USB cable... and choose another USB port to connect the cable and try to flash your ROM again

Try this as it has been solved before may help you out
http://forum.xda-developers.com/showthread.php?t=425922

same problem
hi everyone. I have a big problem with my htc touch cruise when I installed a hard spl htc dedicate a Diamond.donc I had a white encrant after I did a hard reset since my htc no longer I have a black encrant are neither green nor orange but when I connect with the pc I am data interface and it does not recognized my htc. In my pay is not qualified repairman three non réparé.aidé unable to please me I tried the commands mtty.exe but does not c I do not really know how it works.
thank you for your patience and for help

Many Thanks for the replies.
I followed the link and i'm confident it will solve my problem. Unfortunately I cannot get mtty to offer "USB" from the dropdown. I remember going round in circles trying to get USB show a few years ago with a SPV C550.
If anyone can help me, that would be great. I'm using Vista. This might be why the steps in both the initial post and replies on the first page don't work for me.

Polaris SPL big issue

I couldnt flash Hardspl any more.
I couldnt install either cooked rooms or original one.
All I see is the tri color screen with the following informaiton:
PLA100
SPL-1.25.0000
CPLD-2
Can you please help?

osama966 said:
I couldnt flash Hardspl any more.
I couldnt install either cooked rooms or original one.
All I see is the tri color screen with the following informaiton:
PLA100
SPL-1.25.0000
CPLD-2
Can you please help?
Click to expand...
Click to collapse
please search before posting a new thread!
http://forum.xda-developers.com/showthread.php?t=425922

nicandris said:
please search before posting a new thread!
http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
I saw this yesterday, and I give it a try, the only issue I have is I have windows vista, so there is no active sync.
I tried to kill the process using ctrl Alt Del in order to see the USB port but I couldnt managed to do that.

Under windows Vista its called 'Windows Mobile Device Center' (wmdc.exe).

I tried everything
Dear All : I tried almost every thing mentioned in this subject over 4 or 5 threads ,I'm still not able to connect through USB ,I tried MTTY and also I can't see the USB in the available ports ,I tried with winXP and killed the activesync processes and tried with Win Vista and also killed the WMDC process BUT no way I failed.
At the boot screen I have the following
Pola100 MFG
SPL-2.20.oliNex
CPLD-2
Anyone have a solution please I use my Polaris in managing my business and now I;m in deep ****

hamed_marie said:
Dear All : I tried almost every thing mentioned in this subject over 4 or 5 threads ,I'm still not able to connect through USB ,I tried MTTY and also I can't see the USB in the available ports ,I tried with winXP and killed the activesync processes and tried with Win Vista and also killed the WMDC process BUT no way I failed.
At the boot screen I have the following
Pola100 MFG
SPL-2.20.oliNex
CPLD-2
Anyone have a solution please I use my Polaris in managing my business and now I;m in deep ****
Click to expand...
Click to collapse
i can see that hardspl is installed. did you tried flashing from sdcard?

i have had problems with stuck in bootloader (3 color) mode and also the prob with mtty in win vista...i try it on winxp and wow...it goes...

You use it to manage your business? Next time, dont mess with the ROM on your phone then
You seem to have SPL on the device. Try a different USB cable perhaps for connectivity.

nicandris said:
please search before posting a new thread!
http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
i have the same problem and i tried this and tried almost all other bootlaod related threads and nothing worked, i have win xp and i can use the software advised but after everything works and the devise restart nothing happen and here we go to the same bootload three color screen.
what is shows is the following:
POLA100
SPL-1.28.0000
CPLD-2
the funny and wierd thing is that this happened without any notice and not during flashing or upgrading, i left the phone on the table and came back to see it stuck in the bootload screen
please help guys ..i spent till now 6 hrs with no benefit .... im a normal user

nicandris said:
i can see that hardspl is installed. did you tried flashing from sdcard?
Click to expand...
Click to collapse
I tried flashing from SD card and I had only the tri color screen with the data mentioned before and nothing happens,I tried use MTTY and I could never have the USB port listed in the drop list.
Thanks for your concern and in advance

wesram said:
i have the same problem and i tried this and tried almost all other bootlaod related threads and nothing worked, i have win xp and i can use the software advised but after everything works and the devise restart nothing happen and here we go to the same bootload three color screen.
what is shows is the following:
POLA100
SPL-1.28.0000
CPLD-2
the funny and wierd thing is that this happened without any notice and not during flashing or upgrading, i left the phone on the table and came back to see it stuck in the bootload screen
please help guys ..i spent till now 6 hrs with no benefit .... im a normal user
Click to expand...
Click to collapse
guys please helpppppp
up

hey ım usıng touch cruıse
pola100
spl 3.13.00
cpld-2
my cruıse not oen ower.always bootloader trı color .usb ok but ofıcıal rom ınstallıng problem yüzde1 later shuttıng.what must ı do?