TMobile Wing Setup?? - Wing, P4350 General

Hi guys, I'm new to the forum..great place by the way, I am trying to help a friend with his new Tmobile Wing.I have a XV6800 and I am fine when it comes to cooking roms and adding cabs with this device, but this Wing so different. Sorry for asking simple questions, but I did try to read quite a few post before asking, it's just I dont have much time to see this kid and do some cool stuff to his phone. Do i have to upgrade to WM6.1 for any reason..I have it for the GPS function on my XV, but what about the wing? Do I have to unlock it with Hard-Spl to add cabs or anything to phone?Thats it I just need a heads start, thanks guys. Keep up the good work.

the wing does not have a gps chip inside it, but upgrading to wm6.1 is still pretty dandy.
You will have to hard-spl to flash a custom wm6.1 rom to the phone, as we have no official upgrade. However, because it is gsm, nothing really important has to be memorized before flashing

Related

Wizard/MDA Upgrade Procedure...

Some info about my phone
IPL 1.08
SPL 1.08
GSM 01.09.10
OS 1.8.10.2
I would like to upgrade to the latest i-mate rom ( i think ) i don't know any differences with any other roms etc... ive been looking on the other threads maybe if my question has been answered with someone else... i can get pointed to a proper thread, i just want to know what steps i should take to upgrade my rom, i dont wanna lose any data, not that i have much id like to backup my contacts basically thats the most important, also.. since i dont have money for a 128 card right now would it be possible to load someone elses backed up tmobile mda rom ? if they zipped it up and sent it so i can restore it when i get a msd card.. any help is greatly appreciated , thanks in advance.
Copy your contacts by ActiveSyncing them to a PC, or copy your pim.vol (in the root of your Device) to your SD card and upgrade it.
Good luck.
Ahhh
Ah okay now... which rom should I try out first ? and... don't i need to CID unlock it? i'm trying to find a good thread on the upgrade procedures and the best rom to try first.
Best rom...best rom..... the Rom you choose is a personal choice (and yes, you need to CID unlock first IF you want to upgrade to a Rom of another manufacturer, if you have lets say T-Mobile and you want to upgrade to another T-Mobile Rom, you don't have to CID unlock your Wizard).
I like the Qtek Roms myself, but then again, I only use Dutch Roms, not WWE (WorldWideEnglish) Roms, so I have to make a choice between T-Mobile or Qtek and then the choice is simple in my opinion
If you don't know anything about upgrading, my opinion is, try soms official Roms first, then you know what the deal is and then you can make a choice if you maybe want to use a customized Rom like the Mr. Clean Roms for example.
Regards,
Molski
p.s. There are A LOT of threads about upgrading.
Ah thanks for the info... i tried a beta 2.24 rom i think... its pretty nice, i personally cant tell much of a difference,, connmgr is different has more options etc... im thinking of trying mr clean 2.3 is the latest right ? and if i get this does it include all the office apps and such ?
a second question... i dont like the wifi apps included and i noticed an AXIM dell PPC with WM5 had a nice wifi config app/wifi AP finder, and noticed it was made by Hi Tech Computer (HTC) any way to copy this or use it on my phone ?
check my other thread about my CID unlock problem and let me know if i should try to CID unlock it again... and backup... thanks!!

Help me get WM6 for my HTC wizard (att)

All I'm looking for is a quick WM6 look-a-like theme, rom, or skin to make my HTC wizard (att) look like it has a WM6 look with out ****ing it up. So if there's something out there that's simple but still can give the full effect, please send it to me or let me know where to get it from. Thank you.
EMAIL me at: [email protected]
just reflash it with one of the roms available and get the real wm6 instead why make it look like wm6 if its not?
as long as it is CID unlocked then it should flash fine.
install this one, just choose which file hosting site link that works, there are three to choose from
http://rapidshare.com/files/55105496/TNT_5.0_Wizard_Professional_HTC.Home.zip
http://www.megaupload.com/?d=G7BBBSLZ
http://www.sendspace.com/file/r2aebc
from this thread
http://forum.xda-developers.com/showthread.php?t=328917
this rom is a lot better than wm5 and includes a lot of built in stuff that saves installing lots of apps
Up to you if you do try or not
if your device isnt cid unlocked it will just fail at 99%, but as it only takes 10 minutes to flash i wouldnt be bothered about it.
Make sure you backup the phone before you try as you will lose everything on the phone
Wow!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Anyways if you aren't lazy read the forums. Read the WIKI. If you have a Wiza-100 , Then if you can read and follow instructions. You should have no problem Upgrading your phone to wm6. Learn about Cid unlocking your phone. then you can download wm6 to your phone.
I was going to buy a new htc phone. Was tired of my old wizard. so i decided to try wm6 before i bought a new phone. And since upgrading i dont see any reason to buy a new phone.
Running Touch No Evil.

Need Help With Wizard!!! Pls Read

Hi, I'm going to be getting a SIM unlocked t-mobile MDA soon, and was wondering if I should put a custom ROM on it. I understand I have to CID unlock it first. I'm new the custom ROM thing, but I've been intalling custom homebrew firmwares on my psp all the time, so I know about the risks. People have told me that I shouldn't do it because the mda is desgined for windows mobile 5, and should be left at that, and custom ROMs are very buggy, and freeze a lot. Is this true? and can someone help me to CID unlock my MDA. Also, how can I tell if its a G3 or G4? and what's the difference between them? and there are so many custom ROMS out there, which one is the best? I heard it was the core 2 by xplore, but im not sure. What do you think? Please answer with something! I'm very frustrated right now, THNAKS!!!
In the section called wizard upgrading is a sticky by Dr. P...in it it explains how to unlock your device. Read it, then read it again, follow the directions explicitly.
As for rom...I have a Tmo MDA running a WM6 custon rom...Jaguar 3.1
Each rom is different, it depends on what you want in a rom. If you want bells and whistles go with a TNT rom. If you want a zero calorie rom go with a Core rom and customize as you need by installing 3rd party apps. If you want something in between, go with Jaguar or a Faria...there are so many amazing chef's at work here at xda, that in truth, you just gotta try each kitchen out until you find the one that meets your tastes. Be warned...you may turn into a flashing junkie and need to join the xda 12-step program!!!
Ok, thanks. You've helped me a lot. I think ill go with the faria or jaguar, I like the sound of them, but ill look up more info on them first. Thanks again.
waleed786 said:
Hi, I'm going to be getting a SIM unlocked t-mobile MDA soon, and was wondering if I should put a custom ROM on it. I understand I have to CID unlock it first. I'm new the custom ROM thing, but I've been intalling custom homebrew firmwares on my psp all the time, so I know about the risks. People have told me that I shouldn't do it because the mda is desgined for windows mobile 5, and should be left at that, and custom ROMs are very buggy, and freeze a lot. Is this true? and can someone help me to CID unlock my MDA. Also, how can I tell if its a G3 or G4? and what's the difference between them? and there are so many custom ROMS out there, which one is the best? I heard it was the core 2 by xplore, but im not sure. What do you think? Please answer with something! I'm very frustrated right now, THNAKS!!!
Click to expand...
Click to collapse
It all depends on your taste...i always like to cook my own ROM...pick the one you like, dump and add packages you like and enjoy...but READ (I mean READ...) wiki and stickies before you flash...dont just flash anything and brick your device...
PS: Stick with OS version ending .318 for better wifi connections
Ok, thanks. I should be getting my MDA tomorrow (thursday) so Ill probably start installing custom ROM's on friday, because I want to get to know the MDA a little bit before I install customs ROM's. Also, how can I check if it's a G3 or G4? I know it has something to do with the numbers that show up when the device is turned on, but I'm not sure, can anyone help? Also, hat do u mean "add packages" can I customize my custom ROM however I want? I can add whatever apps I want on the ROM? Also, are all custom ROM's windows mobile 6? are there such things as windows mobile 5 custom ROM's? its not that I want it, just curious. Is there a such thing as jaguar.318? (you said .318 has better wifi)
waleed786 said:
Ok, thanks. I should be getting my MDA tomorrow (thursday) so Ill probably start installing custom ROM's on friday, because I want to get to know the MDA a little bit before I install customs ROM's. Also, how can I check if it's a G3 or G4? I know it has something to do with the numbers that show up when the device is turned on, but I'm not sure, can anyone help? Also, hat do u mean "add packages" can I customize my custom ROM however I want? I can add whatever apps I want on the ROM? Also, are all custom ROM's windows mobile 6? are there such things as windows mobile 5 custom ROM's? its not that I want it, just curious. Is there a such thing as jaguar.318? (you said .318 has better wifi)
Click to expand...
Click to collapse
All you need is in here http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard. Jaguar is .318 OS, if you flash that you should be good to go...read wiki before you do anything with your MDA. Good luck.
waleed786 said:
Hi, I'm going to be getting a SIM unlocked t-mobile MDA soon, and was wondering if I should put a custom ROM on it. I understand I have to CID unlock it first. I'm new the custom ROM thing, but I've been intalling custom homebrew firmwares on my psp all the time, so I know about the risks. People have told me that I shouldn't do it because the mda is desgined for windows mobile 5, and should be left at that, and custom ROMs are very buggy, and freeze a lot. Is this true? and can someone help me to CID unlock my MDA. Also, how can I tell if its a G3 or G4? and what's the difference between them? and there are so many custom ROMS out there, which one is the best? I heard it was the core 2 by xplore, but im not sure. What do you think? Please answer with something! I'm very frustrated right now, THNAKS!!!
Click to expand...
Click to collapse
Hmmm, Take my advise,as you are getting a new device,it wud probably will be with wm5 T-Mobile Rom.why don't you just use it for sometimes,enjoy the new device,get to know all the features and applications and really get to know your device and when you are fully comfortable then go for an upgrade to wm6 version Rom. In the meanwhile, READ 'n' READ all about CID unlocking and upgrading,so that when you are actually going to do it,you have the whole procedure done successfully and effortless
Secondly, it's very very important to know the correct DOC chip version on your device ( G3 or G4) cuz both the devices have all together different method for upgrading,if you do a G3 method to unlock or upgrade to a G4 device,it'll "Brick" the phone,so first determine the version of the device. Download the WST Tool and install,run it and check the report it generates to verify the DOC chip version,whether it's a G3 or G4 device.
Good luck
Yeah, your right, I got my MDA yesterday, and I'm pretty happy with wm5 right now. Ill put a custom ROM on later, no point in risking a birck already, but I still want to CID unlock it now, so I don't have to do it later. Thanks for your advice. I found a lot of things to on the net make a wm5 look like wm6, i got a theme, and media player skin. Do you know any other ways I can make my wm5 look like wm6? Icons? buttons? sounds? is there anything like this on this website? i'm going to check anyways.
Search in the xda wizard forums. A while back someone posted WM^ themes, ringtones, icons etc...if it isn't in the wizard section, then I saw it in the general topics section. Sorry I cannot remember which, but I DO remember seeing it posted here at xda, so just search WM6 themes.
What do you guys think of this rom: http://forum.xda-developers.com/showthread.php?t=310864 is it a .318? does it have good wifi? please give me a short review or something
waleed786 said:
What do you guys think of this rom: http://forum.xda-developers.com/showthread.php?t=310864 is it a .318? does it have good wifi? please give me a short review or something
Click to expand...
Click to collapse
Well,this one is an old cooked Rom on an older Base Rom,there are at present many latest cooked custom Roms on newer Base Roms,I'll suggest you to consider those,it wud be more beneficial and enjoyable with better and advanced features.Like TNT 1437,TNT 1933,NBD 9.2,they all are excellent build Roms.
You can check out all the latest wm6 Roms on 'Wizard Mobile 6' forum
ok thanks, also i used the lokiwiz program to CID unlock wizard, but I am not sure if it worked, is there any way to tell if my mda is really CID unlocked??? Also, can I upgrade the ROM witgh Vitsa? it didnt work, then I tried the activesync driver, I found the instructions on this website, bit it still didn't work, i followed all directions, and tried 10 times. I try to update, but right when it says verifying device info, i get the message "ROMupdateutility MFC Application has stopped working" PLEASE HELP, ANYONE.....
waleed786 said:
ok thanks, also i used the lokiwiz program to CID unlock wizard, but I am not sure if it worked, is there any way to tell if my mda is really CID unlocked??? Also, can I upgrade the ROM witgh Vitsa? it didnt work, then I tried the activesync driver, I found the instructions on this website, bit it still didn't work, i followed all directions, and tried 10 times. I try to update, but right when it says verifying device info, i get the message "ROMupdateutility MFC Application has stopped working" PLEASE HELP, ANYONE.....
Click to expand...
Click to collapse
To verify the CID lock/unlock status,download the WST tool and run,check the button "CID Action" written on it,this will give the report to verify if you device is CID locked or unlocked.
Secondly,don't use Win Vista as it has many problems yet.Flashing is always easy and recommended with WinXP SP2,ok
Cheers
zabardast_1 said:
Well,this one is an old cooked Rom on an older Base Rom,there are at present many latest cooked custom Roms on newer Base Roms,I'll suggest you to consider those,it wud be more beneficial and enjoyable with better and advanced features.Like TNT 1437,TNT 1933,NBD 9.2,they all are excellent build Roms.
You can check out all the latest wm6 Roms on 'Wizard Mobile 6' forum
Click to expand...
Click to collapse
Not always an old OS is bad
Maybe you'd like to give my ROM a go
ok thanks for all your help. I guess ill have to go to the library to put a custom ROM on, the have xp there. What is your ROM? Can you tell me more about it?
ok thanks for all ur help. I go to the library to out a ROM on it, they have xp there. What is you ROM dferreira? can you tell me more about it? is it wm6,? is it the one in your signature? I kind of like that one, even though its not wm6, you have a good reason of keeping it at wm5. Another thing is can I use shelltool to put a custom ROM on my mda? does it work with every ROM? if it does, why doesn't everyone use it? what's the use of CID-unlocking it when shelltool is easier and faster? is there a catch?
waleed786 said:
What is you ROM dferreira? can you tell me more about it? is it wm6,? is it the one in your signature? I kind of like that one, even though its not wm6, you have a good reason of keeping it at wm5. Another thing is can I use shelltool to put a custom ROM on my mda? does it work with every ROM? if it does, why doesn't everyone use it? what's the use of CID-unlocking it when shelltool is easier and faster? is there a catch?
Click to expand...
Click to collapse
My ROM is WM5, based on the old AKU 2.3 (rev 4 is, rev 5 which is gonna be released soon will be the latest WM5 OS build). You should not use shelltools to change to my ROM, since I've got some fixes/updates done by extendedRom, which shelltools doesn't update! Also, WM5SE is G3/G4 safe, so you can use SoftSPL or HardSPL to flash it so its safe for every Wizard PDA. Why doesn't everyone use it? Its the freedom of choise, everyone is free to use whatever ROM satisfy his/her needs. ShellTools takes about 30 minutes to flash. A CID Unlocked device can be flashed using the official RUU upgrading program, that takes about 6 minutes... also its safer.
Just make sure you have read all the stickies on WIzard Upgrading forums, before ever flashing!
You said you took out windows live, where can I download it if I want to put it back on?
IMPORTANT!!!
one last question, do I need to downgrade my SPL to CID unlock my phone? I have a G3 T-mobile MDA runnig the latest t-mobile 2.26 ROM. How can I downgrade to CID unlock my phone? LET ME KNOW ASAP, I'm in a rush....thanks!
YES !
CID unlocking is only possible through 'lokiwiz02b' Tool and it only works in IPL/SPL 1.xx,so to unlock you'll have to downgrade to IPL/SPL 1.xx.To CID unlock read this Sticky :-
http://forum.xda-developers.com/showthread.php?t=263116
Good luck

Alltel Carrier Customizations

Hey guys. I'm new to the CDMA side of windows mobile. I've had the att 8125, and the 8528 hermes for quite some time. I got into the modding of them heavily and have, I'd say, quite a bit of knowledge in it(flashing, modding, registry..blah blah)
Anyways.
I recently bought a Sprint Touch, unlocked it, and flashed Alltel's latest OEM rom. I've noticed some Alltel cooked roms, and such things for it, but it's very limited. I have found a cooked rom, which I come to belive is bare, as in no carrier mms/internet settings. I was wondering if there are cab files like I used to download for my hermes(U.S T-Mobile settings) that I can apply to my bone stock rom. Any help would be appreciated. Thanks in advance.
try this
http://www.lifesnotsogood.com/dcd1182/carriers/
Are those are cab files for windows mobile devices in general. As in not just phone specific? If so, Thank you so much..Bookmarking that page.
i'd say it's for all.. but it doesn't contian a lot of customoztion as i just checked the alltel file now!! just the PPST and a dll and lot of registery keys.. i'll look for another cab for you..
Thank you, much appreciated. I just want to make sure that when I flash a ROM to my Touch I am able to have my rev a internet and MMS.
PapaDocta said:
try this
http://www.lifesnotsogood.com/dcd1182/carriers/
Click to expand...
Click to collapse
For whatever reason, that link doesn't work, and I need the Alltel cab.
indeed.. it looks like dcd has stopped sharing his site!
edit
site moved to
http://dcd1182.n715dp.com/index.php?dir=carriers/

Sprint 6700/WM6.1/Diamond Upgrade

Hi Everybody and Anybody,
I know go ahead this is stupid. This has been posted before and so forth, but i'm freakin frustrated of looking and I can't seem to find a way to upgrade my dang 6700 to WM6.1. Please anyone post if you have have or had a 6700that you were able to successfully ugrade. The whole bootloader and radio thing is just to complicated for me. I can never get that to upload correctly on my phone. It always gives me this connection Error 260. Please anyone help. I have a Sprint 6700ppc w/ Helmi's Apache WM6.0. I have bootloader 2.02 with radio 1.27. And if you were able to get that dang diamond cab to work let me know as well. Please anything a tutorial anything.
Thanks,
Walt
Forget the diamond cabs, at this point they are just not compatible with the 6700. Maybe there is hope for this one day, any developers know if there is any possibility of a future version being compatible? But as far as getting WM6.1 I've got it on mine.... visit www.ppckitchen.org and download the newest BuildOS update it and be sure to choose your bootloader version, works like a charm! also this should probably be posted in the 6700 forum and not in DEV
Ari
Can Someone Help Me
I Want To Upgrade My Sprint 6700 To Window 6.1 So How Do I Do It

Categories

Resources