Question about USB/Charge Port - 8525, TyTN, MDA Vario II, JasJam General

Is there a connection between the hardware and the software?
My hermes (as weird as this may sound) has this problem where. if I put my charger in, and slightly move it around, it will no longer charge and pulling the charger out and back in does NOTHING
If i connect my phone to my PC via USB.. it will work, but if i want to connect it back to the regular wall charger, it won't charge until I completely shut the phone off, then turn it back on.
However, with my phone turned off... whether it's on the USB connection to PC or wall charger, i can jiggle the wire and do all sorrts of stuff and the orange charge light will stay on...
anyone know what this means?

I don't know but I'm having the same problem.

Related

HTC TyTN does not charge anymore.... Need Help

Hi Guys
I have a problem with my TyTN at the moment.
My device is not charging.
Yesterday i put it in my Docking Station and wait a little time.
But Now the Tynt isnt charged.
I think ist a Problem with my TyTN Hardware.
I have all Power Supplys used they i have, but it doesent work.
Can you help me?
Its this a problem with the accu or a fuse on the circuit ?
Sorry for my broken english i hope you understand me.
Regards Patrik Laube
Hello,
first of all, try to soft reset the device.
If it fails, hard reset it.
If it doesn't work, go the service center.
Good luck
The above advice is fine. But you did not say if any of the LEDs are lit.
Do you get the red NO CHARGE LED?
Does your phone operate normally except for not charging?
Mike
Hello
My Phone is working fine but i cant charge it with the original HTC adapter.
I must load the accu with a special loader.
USB and Charge dont work....
And i have no warranty I cant send it to my operator.
When i plug in the USB Cable it doesent make everthing.
I think it was a to high voltage on the USB or the USB Ground ( - ) had a electrical Power for a litte moment.
Have you an idea?
Thanks for yur help.
Regards Patrik
I had a similar problem, which was sorted by a new rom, but I ascertained it was software problem when I realised it charged when powered off.
PatrikLaube said:
Hello
USB and Charge dont work....
And i have no warranty I cant send it to my operator.
Have you an idea?
Thanks for yur help.
Regards Patrik
Click to expand...
Click to collapse
hi,
try this: when your device is connected via usb, tab on the battery icon in the taskbar on you device, go to the register "advanced" and check/uncheck "When Device is turned on, do not charge the battery when connected to the pc"
thats it
greetz
mizi
I'm having an issue along these lines, also.
My phone has been working fine untill the other night when I tried to charge it via the wall electrical outlet. It will not charge at all, the battery has been drained to nothing and I can't turn it on. The yellowish light doesn't turn on when I plug it in like it used to.
I don't know if this is a battery issue or an issue with the USB connection inside of the phone. On a side note, when it did have power and I tried to connect it to the USB via the PC; it didn't work. The phone was on, but the computer didn't even notice the phone was plugged in. That leads me to believe it would be a connection issue; but I'm not quite sure.
If anyone has anything they can add to this I would appreciate it, thank you.
P.S. Bringing it to a service center is a bit out of the question in the mean time seeing as it was bought on eBay and funds are limited for the time-being.
MiZi666 said:
hi,
try this: when your device is connected via usb, tab on the battery icon in the taskbar on you device, go to the register "advanced" and check/uncheck "When Device is turned on, do not charge the battery when connected to the pc"
thats it
greetz
mizi
Click to expand...
Click to collapse
Hello, I cannot find the "When Device is turned on, do not charge the battery when connected to the pc" in my device. My Rom is WM6.1 CE OS 5.2.20273 cooked by dvha79_ddt.
My HTC TyTN has the sample problem, but i can use the USB to charge normally. It cannot work using my AC adapter Only when the device is open...
About your Battery Issue.
I'll tell you exactly why ur phone isnt charging anymore... If you have been charging it alot on the USB or pretty much any!! charging on the USB u have killed ur battery, never charge your phone on the USB it kinda sucks they should make these phones able to be Sync'd thru USB without a battery cause these batteries should not be powered thru the USB over Time... from syncing to your pc will kill these batteries i have noticed that when u sync this Tytn Ithru USB and the device is at say 70% it charges up to 100% pretty fast i would recommand to you and anyone who reads this dont sync your TYTN or any HTCC phone for to long to the USB Cause it will Trash your batteries Life down the road... Hope this was HELPFUL.
Cheers
Paul
PatrikLaube said:
Hello
My Phone is working fine but i cant charge it with the original HTC adapter.
I must load the accu with a special loader.
USB and Charge dont work....
And i have no warranty I cant send it to my operator.
When i plug in the USB Cable it doesent make everthing.
I think it was a to high voltage on the USB or the USB Ground ( - ) had a electrical Power for a litte moment.
Have you an idea?
Thanks for yur help.
Regards Patrik
Click to expand...
Click to collapse
hi, did anyone solve this problem ? ive got the same problem with my htc touch cruise, i think it charges when turned off but doesnt when on. the orange light doesnt turn on when i plug usb to charge it and it doesnt sync thru the PC neither.
Does anyone has a solution to this ?Thanks a lot!
does anyone has a solution to this ?
hi, did anyone solve this problem ? ive got the same problem with my htc touch cruise, i think it charges when turned off but doesnt when on. the orange light doesnt turn on when i plug usb to charge it and it doesnt sync thru the PC neither.
Does anyone has a solution to this ?Thanks a lot!
^I'm having the same problem with my herm200. I did the soft reset, hard reset changed ROMs but still the same problem. I don't think it's the usb connector because if it is it wouldn't have been able to charge the phone even if it's turned off. Before I'm able to charge it turned on but it would take a few minutes before the orange led turns on, but when I use the phone or if I receive a text the orange led would turn off it's like the charger disconnects but after a few minutes it would go back again. Now it just wouldn't charge turned on, sometimes it gets worse where it just wouldn't charge on or off.
Now I'm already planning to buy an external battery charger.
gypsygirl13 said:
^I'm having the same problem with my herm200. I did the soft reset, hard reset changed ROMs but still the same problem. I don't think it's the usb connector because if it is it wouldn't have been able to charge the phone even if it's turned off. Before I'm able to charge it turned on but it would take a few minutes before the orange led turns on, but when I use the phone or if I receive a text the orange led would turn off it's like the charger disconnects but after a few minutes it would go back again. Now it just wouldn't charge turned on, sometimes it gets worse where it just wouldn't charge on or off.
Now I'm already planning to buy an external battery charger.
Click to expand...
Click to collapse
Are you using an official 1000mA charger? (Not a 500mA one) 500mA ones work, but they are under-powered and can cause strange behaviour, like not charging whilst turned on or whilst on a call. Similar problems can be found with car-chargers that will not charge until the device is soft reset.
Mike
^no it's not the official charger, I have this usb wall charger called Power Juice (phone and mp3 charger).
Input Voltage: AC100-240V
Output Voltage: 5V
Output Current:1000mAh
Do you think it's because I'm not using the original charger?
fixed my charging problems
The boyfriend told me to try a new cable for my charger so he bought me a 5pin usb cable, tried it at home and it worked! I still need to turn off the screen sometimes but that's ok at least I don't have to turn off the phone anymore. Now my battery charges less than 3 hours.
Hold both SoftKeys and Then press the Power button
Or you can also hold both softkeys and then put your stylus into the reset hole.
answer why it does not charge through the usb
Sorry for the very very late response. Under electrical legislation all hand held electrical devices must be insulated and fused. Some of the chargers that you can purchase are sealed without fuse which indicates that the phone has a fuse contained within its circuitry (or there may be 2 fuses one in each device) .
The problem you have encountered is that you have connected your phone to a computer or mains supply to charge. There has been a surge in the electrical supply either on connection or by un-connecting from these supplies (e.g. connect to the computer as it is booting would see a 65w signal through the USB) and this more often than not blows the fuse which sits on the PCB (printed circuit board) just after the usb connection internally to the phone.
you can either have the fuse fixed for 20/25 gbp or you can purchase a new circuit board or you can use an external charger for the battery. As it is only the power input point that is faulty.
hope this helps
Since we are at this non-charging & battery issue, I would like to ask this question on the D838pro. My battery won't charge even after 24 hours of charging. The red LED blinks thru the whole process. The LED did not turn on to orange or green. It is the battery problem because my spare battery works well. I would like to know what is wrong with the battery as I am willing to strip down the battery. Could it be the battery circuit or wiring that had fired?
cyberdroxxx said:
Since we are at this non-charging & battery issue, I would like to ask this question on the D838pro. My battery won't charge even after 24 hours of charging. The red LED blinks thru the whole process. The LED did not turn on to orange or green. It is the battery problem because my spare battery works well. I would like to know what is wrong with the battery as I am willing to strip down the battery. Could it be the battery circuit or wiring that had fired?
Click to expand...
Click to collapse
Never tried stripping down a battery, some things... well, just don't seem worth it. However as a learning exercise it might be interesting. Without lots of testing on a good battery with a multimeter then I have no clue what the readings should be between all the contacts. (Now there's a little job for you) It is as likely the internal structure of the battery is screwed as it is to be a wiring problem.
If you solve it you can certainly report back here
Mike

SOS.Help me please.i cannot turn on my touch

My htc touch's battery is almost empty last night.i turn off my phone and take the pin out.This morning i plug all again,charge the battery.But many hours, my phone cannot turn on,there is one red light is pusle.
How can i charge and turn on?
Help me please,i just buy this!
"Sorry about my english"
maybe you didn't plugged your charger to your elf properly, i mean sometimes when i connect the charger to my elf it doesnt connect well, even if you connect the mini-usb plug it doesn't detect it, i have to check if the battery meter is moving or charging to know that i properly connected my device to the charger. maybe thats what happened. thats why its not turning on because its totally discharged.
Did you try to flash a new rom onto it recently?

Now my phone won't charge

Totally stock (but i don't think it matters).
Plug the phone in, orange LED comes on.
Hold it or place in on the counter five seconds later, LED is off.
Had the phone since 6/4.
Anyone else having issues?
Are you using the AC charger ? I have two Evos and one of the chargers does what you are describing. The orange LED comes on and then goes off after a while and the phone stops charging. Does it on both phones, the other charger works fine with both usb cables.
Are you using the USB charger with a computer or laptop or plugging straight into the wall with an AC charger?
This does make a difference because if you are charging with a USB + laptop combination you could be suffering from the computer going to sleep and disabling the USB ports power to conserve laptop battery life. If you are having the issue when plugging into the wall, try plugging into a computer and selecting the "Charge Only" option when your USB debug comes up. Once it does this, allow it to charge for a period of time and then turn the phone off, switch to AC power plug and see what happens.
Perhaps you had some kind of over voltage spike on the charger through the AC plug. I could see it possibly tripping something in the phone to stop taking charge to protect the handset.
Also make sure if you do use a laptop, use a USB 2.0 or better port. More power and faster connection. Gotta love it.
Your charger may not be sourcing enough current anymore (for whatever reason). I have seen the exact same behavior with USB car chargers that were only sourcing 100-150mA.
Have you tried plugging the USB cable into a modern desktop PC? (Some laptops have reduced current ports, so a desktop is a safer bet)
Its definitely a current issue. I tried to charge my phone using my bluetooth headset's wall charger, but I got the behavior you are describing. The bluetooth headset's charger just doesnt put out enough current.
Are you using the charger that came with the phone? if so, you may want to exchange the charger...
im having the same problem when i connect it to my desktop, it sees it for about 2 secs n then disappears. My computer at work has no problem seeing the phone. i wonder if i need a driver or something for my usb ports, anyone have any ideas??
tarheelsmj12001 said:
im having the same problem when i connect it to my desktop, it sees it for about 2 secs n then disappears. My computer at work has no problem seeing the phone. i wonder if i need a driver or something for my usb ports, anyone have any ideas??
Click to expand...
Click to collapse
Probably not a driver issue, but that that rail from the power supply is either undervolted (say 4.6V instead of 5V), or can't provide enough current (amperage) or both. If I recall correctly, the Evo needs 5V @ 1A (+/- 3% tolerance).
Phone not charging
my phone has been charging fine since I got it... even been using the night desk clock app while sleeping at night for the alarm with it plugged in... everything was good...
With my phone about to die today, I plug it in to the wall charger, the led/batter indicator shows that it is charging... then POW.. it says I have a low battery and it needs to be plugged in... WTH??? it is plugged in!
The only thing I did today was flash the new boot.img for the cap fix over in Toast's thread...
Weird thing now is that I took my hero battery and put it in my EVO, plugged it into wall charger, and it stays charging... So, I put my EVO battery in my hero, plugged it in, and whola... it's now charging...
Please help as I am baffled.
MILH0U5E said:
The only thing I did today was flash the new boot.img for the cap fix over in Toast's thread...
Click to expand...
Click to collapse
that's your problem right there. that custom kernel is known to have charging issues.
I'm having the same issue with my car charger consistently. Plus my AC charger less consistently. For example, I'll go to bed and plug it in, the next morning I wake up and see the phone is at 80% charge and isn't charging. At some point over night, it gave up. This is with the stock charger too.

X10i not turning on / charging

Hi guys,
Suddenly facing a strange problem since last night.
My x10i was running out of charge & i connected to the comp to charge while i was working. I noticed the charging speed was extremely low, so i restarted the phone to see if it would help. Did not.
Thought there is some problem with the cable, used a different cable as well, but no use.
The slow charging had stopped and eventually the phone died.
Tried connecting to the socket & charging, still no use.
The red led blinks when i connect the phone to a charger via the usb or the socket.
needless to say the phone does not even boot up now, obviously for no charge...
any ideas wat maybe wrong or wat i could do ?
please advice
Have you tried to let it charge for some time in off mode? As long as your battery is not dead, and the phone get the right voltage through the USB connector it should charge in an "emergency mode". This is a slow way of charging, but allows for charging without any electronic circuits to monitor it, it is not the same as the charging screen that usually displays when you connect the phone while it is powered off. Usually when a phone is completely discharged it needs to be connected at least 15 min, sometimes a lot longer, before the electronics kicks in, and starts the speedcharging.
My best advise would be to connect it to the mains charger, or a USB port you KNOW supplies power. Some laptops cut down on the powersupply to the USB ports when they run on battery. Let it be connected for a long time (several hours), and then try to power it on again.
If that does not help three things can be wrong
1. Somewhere the USB connection is broken, either in the cable or in the connector on your phone (or on the PC's connector, but that is less likely).
2. The battery is dead, modern batteries contain circuits that actually disables the battery when any given parameters gets outside the defined limits. This is to prevent the battery catching fire. On some batteries this renders the battery useless, and you need a new battery.
3.) The mainboard of your phone is dead, and hence nothing works, can be ruled out if you can borrow a battery from someone to test if your phone works then.
I hope a good and long charge can sort out your problem, that is the easiest fix, and it is free.
Hi O_K,
well, i have been charging (or trying to) the phone since it died last night.
i have used different chargers & different modes of charge (through the system & the wall socket) - no joy at all.
the LED blinks red a couple of times when connected.
Very occasionally, the SONY ERICSSON logo (startup) shows on the screen & it switches off again, back to the blinking.
So charging for a long time & through different chargers has not helped.
gonna try a different battery now to see if that can help.
Thanks for your response!
well, tried switching chargers & batteries.
The problem seems to be with the charging unit on the phone (USB)
with any charger or battery, wen connected the led blinks (like wen the phone is charging), but there is no charge happening.
eventually the phone dies, even if charging
any ideas?
There is a thread some where in this forum for fixing the same problem you have...I don't remember the exact name of the thread..if I find it I'll post the link here..Anyways what the guy did was
-Pull the battery out and connect the charger till the led turns green.
-put in the battery now and charge the phone...
and I think that was it.
Hope it helped..
EDIT: Found the link.
http://forum.xda-developers.com/showthread.php?t=944322

[Q] Defy Charging problem

Hi,
Motorola Defy (MB525) with CyanogenMod 7.2 stable, original battery.
I bought it almost two years ago second handed, it should have now around three years.
Using the original wall charger, it does not charge the phone anymore.
The log shows a lot of lines like
Code:
I/usbd ( 1048): main(): Spurious Cable Event, Ignore
I reboot the phone but it didn't change anything.
I change cable and charger and the behaviour is the same.
The wall charger charges good other phones.
Now the phone is completely discharged.
I plugged in the wall charger and the led turns on white, the os starts but it turns off after few seconds.
Now I'm using a usb cable connected directly to a computer and the phone is off, only led white on.
After a while (5-10 minutes) the phone turns automatically on, it starts normally. But the phone doesn't see the charger.
Plug out the cable and plug in again (connected to the pc).
Now it's charging, but after a while (a couple of minuts) it turns off and there's only the white led on.
After a while (5-10 minutes again) the phone turns automatically on, it starts normally. The phone sees the charger (red led on), but it seems to me, that the charging rate of the bar is way too fast.
Some time ago (1-2 months), it happened something similar, but the phone was charging with the usb cable connected to the laptop.
After that the wall charger charged the phone. A couple of times it didn't work but I charged the phone via usb pc and later the charger was working again.
No visible damage to the micro-usb port of the phone.
The question is, is it the battery or (as I suspect) is the electrical part / usb problem of the phone?
If so, what is a reasonable expected cost of repair (I'm in Germany)... I'm afraid that it will cost more than 50€... then, is it better to move to another phone?
Thank you very much,
Giuseppe
[EDIT]
The charging rate (with the usb cable connected to the pc) is normal. The phone is working normally
gmcgmc said:
Hi,
Motorola Defy (MB525) with CyanogenMod 7.2 stable, original battery.
I bought it almost two years ago second handed, it should have now around three years.
Using the original wall charger, it does not charge the phone anymore.
The log shows a lot of lines like
Code:
I/usbd ( 1048): main(): Spurious Cable Event, Ignore
I reboot the phone but it didn't change anything.
I change cable and charger and the behaviour is the same.
The wall charger charges good other phones.
Now the phone is completely discharged.
I plugged in the wall charger and the led turns on white, the os starts but it turns off after few seconds.
Now I'm using a usb cable connected directly to a computer and the phone is off, only led white on.
After a while (5-10 minutes) the phone turns automatically on, it starts normally. But the phone doesn't see the charger.
Plug out the cable and plug in again (connected to the pc).
Now it's charging, but after a while (a couple of minuts) it turns off and there's only the white led on.
After a while (5-10 minutes again) the phone turns automatically on, it starts normally. The phone sees the charger (red led on), but it seems to me, that the charging rate of the bar is way too fast.
Some time ago (1-2 months), it happened something similar, but the phone was charging with the usb cable connected to the laptop.
After that the wall charger charged the phone. A couple of times it didn't work but I charged the phone via usb pc and later the charger was working again.
No visible damage to the micro-usb port of the phone.
The question is, is it the battery or (as I suspect) is the electrical part / usb problem of the phone?
If so, what is a reasonable expected cost of repair (I'm in Germany)... I'm afraid that it will cost more than 50€... then, is it better to move to another phone?
Thank you very much,
Giuseppe
[EDIT]
The charging rate (with the usb cable connected to the pc) is normal. The phone is working normally
Click to expand...
Click to collapse
Try buying a new battery/cable/charger from eBay. You will have a new phone for less than $10.
You can also install another rom.
leonardoporro said:
Try buying a new battery/cable/charger from eBay. You will have a new phone for less than $10.
You can also install another rom.
Click to expand...
Click to collapse
Did you read the full message?
I change cable and charger and the behaviour is the same.
Click to expand...
Click to collapse
The rom should not be the issue, as it was previously working (for more than 1 year) and otherwise would be a common problem, unless you're more specific...
Anyway in this moment everything is working good... but I expect that at some time I will have the same behaviour... that is phone not charging with any wall charger but charging through a computer.
If so, I will try then to make some other tests (I read somewhere to try to deactivate usb debug mode) and I'll report.
Giuseppe

Categories

Resources