Athena Camera Problem :( - Advantage X7500, MDA Ameo General

Hello i have big problem with Advantage Camera not work
How to fix it???Please help

nobody can help ???

Hi can u explain in detail a little more what the problem is "IE" it wont start at all?

Looking at the picture he included, its obvious it won't start at all.
cornholio have you tried a soft reset, and if that does't work then a hard reset?

yes, i tried softreset, hardreset and ROM upgrade to wm 6.1...

Are you under warranty? I'd press HTC for an exchange. Make sure you put it back to a stock configuration before you do.

Related

PLS HELP ME I AM DESPERATE

i am on the pc for 8-10 hours to solve the problm on this ****ing s200, after a hard reset the device start to work well , but when i ll do a soft reset it could not establish a connection with the pc again moreover "error opening the shortcut or locating the target filename" is shown when i click the comm manager button. i assume that it may be a problem because of the rom version, although i search all the forum and some other sources i cant find a s200 rom which is working, finally i installed the altest version of 818 pro 2.15.13.27 which i founded in the forum. then when i install some software and make a soft reset the device refuse to open and the calibration screen is shown. i dont know what is happened but i am sure that there are some hardware problem. i dont know if somebody else have this kind of problem?? i have also a jamin and it works perfectly with its latest rom. finally give a few dollars more and buy jamin if you really want to use those htc staff...
ps: I am not sure but maybe if s200 ROM will be installed the problem is solved but it refused to install an older rom , now all the soft reset cause the setup screen of windows!!!

plz help Sp3i freeze on wm splashscreen & cant reflash by USB

my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.
Your phone can be reflashed with Mtty even when it freeze on the boot screen cause its not necesary have the phone ON.
Tried to do a hard reset maybe is a windows registry problem.. after the hard reset the values on registry will be reset to default.
already done that, and doesnt work, even it reflashes through USB but afther reaching 100% the phone restarts and get stuck again in the same place, no matter if I hard Reset or reflash by USB the phone still get freeze.
can any one tell me how to delete all the data on the memory to make a clean reflash? or how do I reupload the firmware? is there a way to recover the phone?
remember I already install the WM5 and back to WM2003SE but after that the problem started, maybe i screw someting wile doing it?
Solaris_irc said:
my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.
Click to expand...
Click to collapse
Tutorial for sd flash
Check here

HTC Home installation freeze xperia

Hello Guys,
I had installed HTC home plugin on my Xperia and now its hung or unresponsive. I can see the start, call and Menu on the screen but touching that does not do anything .
Please help me out.
Has anyone seen this before ?
Regards,
which HTC Home are you using ?
i have PJC HTC Home installed and it's working perfectly. once i used the hack for the weather it was fine ...
Thanks for your reply mrdo,
I am using http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v2-1.html
I need to just uninstall this software but the phone is not responding..
please suggest a way to reset.. the other trouble is its not recognized as a device now using USB so I could not use mtty n other things..
is there any other way ??
thanks
thats not for VGA devices, it's for QVGA which is why it's not working.
Can you acess the X1 from through activesync on your PC?
If so then you can uninstall it from there (add/remove programs)
if not then I'm afraid you'll have to hard reset, and learn a valuable lesson, make sure you know what it is you're installing..
Hard reset, is take the back cover off and stick the sytlus in the small hole in the side next to the battery, while holding down the two silver buttons on the front.
Hello fards,
Thanks very much for the help..
Unfortunately I learnt the lesson the hard way
I tried hard reset as you suggested but it did not make any difference
what else can be done.. ?? any suggestion is most welcome.. I can try doing mtty reset but some how I could not go to boot loader mode.. how to go into bootloader mode ?
Please help..
Regards
dhamaal said:
Hello fards,
Thanks very much for the help..
Unfortunately I learnt the lesson the hard way
I tried hard reset as you suggested but it did not make any difference
what else can be done.. ?? any suggestion is most welcome.. I can try doing mtty reset but some how I could not go to boot loader mode.. how to go into bootloader mode ?
Please help..
Regards
Click to expand...
Click to collapse
If you've done it right it must have made a difference as this wipes the devices memory. If you can't do this then don't even start messing about with mtty
if you see the SE logo, then you haven't done it right.
hold the two silver hardware keys on the front of the x1 down after you've reset. Keep pressing them down till you see some text that tells you to press R
If you don't see this screen keep trying (reset+press the keys) till you do.
Thanks fards,
you are a lifesaver !! that seems to have worked and now I can use my phone ..
Thanks a ton once again !!

[Q]HTC elf : Cannot Hard Reset/Read info.

I have a HTC ELF 0100 i want to change the language to english but i cant make anything. I try to hard reset the phone but this also is impossible. there is Windows mobile 6.1 installed in it.
Things you might need to know:
I HOLD the green and red Button and click on reset - for hard reset but nothing happens
To update an english rom i need to CID unlock. but this also fails saying ERROR 260.
And when try to upload a COOK rom it says ERROR 260 and the HTC screen become black i.e standy mode. it does not goes to the BOOTLOADER mode!
Where is the PROBLEM please help urgent !!
im sorry to tell u, but probably u dont have and elf. its a clone.
search the forum for clone info.
But i can assure you it an original one. Not clone or china made. But one things is that the battery is not an original one.
But i can assure you that the mobile is original. Not a China made.
zakiyy said:
But i can assure you it an original one. Not clone or china made. But one things is that the battery is not an original one.
But i can assure you that the mobile is original. Not a China made.
Click to expand...
Click to collapse
Use dsixda's All-in-one tool (http://forum.xda-developers.com/showthread.php?t=418892 ) to find the specific type of your phone.
Than we might be able to help you.
Dala11 said:
Use dsixda's All-in-one tool (http://forum.xda-developers.com/showthread.php?t=418892 ) to find the specific type of your phone.
Than we might be able to help you.
Click to expand...
Click to collapse
Hi man thx for the REPLY but this also i tried !! it does not shows anything !! Only giving Data UNKONw or something like that!
I was able to install ENABLERAPI.cab to make the above PROGRAM work.
i want to know why the ElF is not able to HARD RESET.... I HOLD the TWO BUTTONS [red&green] and PRESS RESET but it never enter the HARD reset..
Very Strange and time comsuming for me i need a REAL solution !!
zakiyy said:
Hi man thx for the REPLY but this also i tried !! it does not shows anything !! Only giving Data UNKONw or something like that!
Click to expand...
Click to collapse
Big chance your phone is a fake.. I'm sorry man..
Perhaps if you posted some pictures of your device (also the backside without the cover, and one without the battery) some might be able to help you figure out what's going on.
Hi
All what you mentioned : No hard reset, No bootloader, No Data with mtty mean one thing this is a chinese clone of ELF and you will find no solution here
Hard reset htc touch elf
hi everybody,
Please help me with my htc touch elf,
I try to hard-reset my htc that have windows 6.5 because of I can't run completely windows and can't soft reset it.
Please help me
Thanx !!!!!!!!!
HEY maaan !
just press the power off button + the camera button and the tri-color screen will be appeared

Need help please

Hi guys,
I need your help regarding an issue with my HD2.
I have a pre-release unit and I tried installing the SMS update from HTC website, but now it won't get out of the bootloader screen, I've tried to install other official ROM's but with no success. The device has SPL 0.67 and it seems that that is cause why I cannot install normal ROM's.
Do you guys know a way to go around that ?
BTW I've tried SSPL and HSPL and they don't work.
Thank you
Have you tried to see if your provider or HTC for your area has an upgraded rom for your device. That may possibly upgrade your spl to at least 1.42?
If no luck there, have you tried doing a hard reset to see if that reverts you to your original rom?
i've already talked to the guys or girls from HTC customer support but they said that the SN and IMEI of the device do not register in their database as an HTC device so they cannot help me.
regarding the hard reset i've tried it many times but no succes.
the solution as i see it so far would be a designated ROM for that tipe of device (pre-sale unit) or some tool to change the SPL of the device.
Have you tried the hard reset to see if you can get back to the original rom so that you have some functionality and not just a paperweight?
yes i did but nothing happend
Sorry to check up, but you won't be the first to have gotten it wrong - you do know the difference between a HARD reset and a SOFT reset?
Hard reset = power off, hold in both UP and Down volume buttons and while holding them in power up the device. Then press volume up and volume up again.
that's what i did
I've heard that there some apps out there that can modify the SPL version. Does anyone have any idea where I can find such an app ?
Contact me, mayb I can help you out!

Categories

Resources