Related
I have only had my XDA 2 for a week and I can’t get my Motorola 810 head set to work. The XDA finds it and tells me that it is compatible with headset profiles but it doesn't seem to work. Can anyone advise me?
Thanks
Andy
Have you followed the procedure for pairing the device,ie: place xda in discover mode, when it finds the headset, tap then enter code for pairing, once paired switch bluetooth to on, then make sure you have bluetooth headset turned on from the main/today screen.
I seem to have problems with my bluetooth headset every once in a while also. I have a HBH65. On ocassion, the connection doesn't seem to be working even though headset is enabled and they are paired. I've found that if I soft reset the XDA2, that the bluetooth headset will work again.
Have you installed towas bluetooth tools patch, this fixes a lot of problems with bonding and alos makes things work where they couldnt before. I was told that the latest rom release here in UK was going to address all these problems too but I havent got around to upgrading yet, I hope it supports full headset profiles so I can originate calls from the headset as well as answering the call.
I have downloaded the new Rom update and it seems no different. I have tried a soft reset and this did not improve the situation.
I know the headset works fine as I use it with my nokia handset with no problem.
Has anyone got a Motorola 810 that works ok on the XDA ?
cruisin-thru said:
Have you installed towas bluetooth tools patch, this fixes a lot of problems with bonding and alos makes things work where they couldnt before. I was told that the latest rom release here in UK was going to address all these problems too but I havent got around to upgrading yet, I hope it supports full headset profiles so I can originate calls from the headset as well as answering the call.
Click to expand...
Click to collapse
did the bluetooth tools patch support voice dial from bluetooth headset? if not did anyone know the new rom from O2 works with this function? thanks!
Andy, no it doesnt support originate call from headset but it did allow lots of different gps and headsets to work, the headsets work for answer call/drop call only as far as I know, in the notes for the xda2 upgrade it mentions the headset profile but I dont know if anybody has hot the headset facility to work yet, I havent upgraded yet so I am yet to test it.
I have installed the new ROM and as far as I can see it does nothing for Bluetooth beyond fixing some compatibility issues on some headsets. It still only allows one headset profile (so if you have a headset and a handsfree kit as I do you need to delete bonded pairs when you change devices - now there's intelligent functionality!!). No headset dialing so still not a complete BT headset implementation. No handsfree support.
Anyone else think that the XDAII is a great PDA but about the worst apology for a GSM phone in the last 10 years?
If anyone can point me to a decent set of BT tools to add on let me know.
Not really.
I fully agree the XDAII is a poor phone, with the best agenda and contact list available, but that is!
I wonder if Phone-pda makers are really going the so called "convergence" way.
To date, and after many different PDA/phone/PDA-Phone devices I've tried, no one is even close to the mark.
Something so "simple" such as merging an OLD Ericsson (or Sony-Ericsson) T-68 phone abilities, with just a PPC 2002 (yes, not even 2003) PDA, should produce a combo, no machine on the market is even close to.
IT'S SO DIFFICULT?
:evil: :evil:
Hi all,
I have Qtek s100 since exactly 2 years. I am very happy and even after relasing so many HTC PDA phones after that, I really did not think of changing my phone. Now I see P3600 as probable candidate to replace my S100. But in addition to size and processor, I would also be looking at some key features as justification to change. I am not going to use 3G or 2MP camera. so, lets narrow down to Free/very cheap phone function on this phone.
- anybody tried to install Skype client to make audio calls on wifi connection?
- Also anybody checked function of SIP voip client like SJPhone again using wifi?
If these features are going to have problem with.. I would still stay back with S100 happily.
AS
Skype works fine on it and I run VoIPSurfer for SIP without any problems!
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
n0t said:
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
Click to expand...
Click to collapse
This is only available on the Eten X500. I finally decided to get this instead of the Trinity coz I dun use the 3G and the GPS is a lot better on the X500.
n0t said:
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
Click to expand...
Click to collapse
It is a limitation in Skype. Try using a headset. Not BT though, since the processor can't handle both Skype and BT headset at the same time..
With my LOOX 720, we also have a "large" speaker (badly positioned even if you wanted to ignore that it is a loudspeaker and put it in your ear) and a small "phone" speaker (placed correctly where you would put your ear), although FSC never released any VoIP app for the device (and LOOX is not a phone).
Skype (and other VoIP apps) worked as you say. Audio was coming out of the main speaker, plus they (Skype) ignored our requests to use the correct speaker (or didn't know what to do about it).
Then some guys noticed that the small speaker was ALWAYS outputing audio (in apps/games etc.), but since it is a small phone speaker, you have to put your ear on to hear it. Also this gives more "depth" in 720 audio (since the tiny speaker does its part). Anyway, that was an interesting discovery because it led to research that gave something more important:
A simple registry entry could shut-off the main speaker while keeping the phone speaker working! No need for soft reset or anything! Some even made a little program for this (which also keeps different volume levels for when on and off since eg. I want volume=2 when loudspeaker is on and volume=4 when only ear speaker is on). Toggle it whenever we want (I have a shortcut in my today screen for it).
So I am thinking... look for something like that in Trinity also? It should even be simpler because I am sure Trinity has pretty clear and distinct volume values for both speakers (since this IS a phone after all).
Maybe a shortcut to a registry key could allow to control the speaker volume... like in the loox. I'll try to search registry... Anyway, this is a known issue for skype, so probably they will be working on that on future releases, maybe it needs customization for every particular model. _http://forum.skype.com/index.php?showtopic=71698
Skype and Bluetooth
I use a stereo BT headset and it works great (iTech clip S38). I used another program to toggle, but battery life went to a couple of hours, even when not in use. If you Skype a lot, or even once on an international trip, the cost is well justified.
n0t said:
Anyone can get skype sound to come trough the phone speaker instead of the loudspeaker? (I think it is a software limitation, but is there a workarround?)
Click to expand...
Click to collapse
It is possible now with the last final (not beta) version of Skype (2.2.20 or something like that).
The problem is, this final version doesn't work for all phones. You can see the list of supported devices on Skype download page.
The Trinity is not supported on this final version. You can only use chat function, and when you place a voice call, the application automatically shut down.
That's why we keep running the previous beta versions, which work fine, but the sound come from the back speaker
I tried this final version on my wizard, and I confirm that the sound does come from the ear-piece, for the first time in skype history. But strangely enough, this 'new' skype is only compatible with 'old' phones...
The text found below was sent to Skype by me today
Dear Skype,
#1 please sent me a list of supported Pocket PC’s that work with skype and with a Bluetooth A2dp Headset.
The one I have now can be found at: http://www.jabra.com/Sites/Jabra/NA-US/products/Pages/JabraBT8040.aspx and I works really well for windows media mobile.
#2 I currently have the following device which does not work with Skype for the Pocket PC with an A2dp headset. I am very upset about this; I really want to use your skype out service, but cant.
My Device Information: Unlocked
HTC P3600, Trinity
ROM version: 1.23.405.2
ROM date: 03/11/07
Radio Version 1.38.00.11
Protocol Version: 32.71.7020.12h
ExtROM Version: 1.23.405.103
I have installed the following versions of Skype for PPC
SkypeForPocketPC-2.0.0.51-LowCPU.cab
SkypeForPocketPC-2.0.0.51-LowCPU.cab
SkypeForPocketPC-2.2.0.18-Beta.cab
kypeForPocketPC-2.2.0.20-Beta.exe
SkypeForPocketPCNew.CAB
The only one that works is the SkypeForPocketPC-2.2.0.18-Beta.cab it works perfectly for the HTC P3600, Trinity however, "only" when you use the corded headset that attaches to the mini usb on the phone, or just the speaker that is on the back of the phone the “external speaker”.
the SkypeForPocketPC-2.2.0.18-Beta.cab, I feel, does not work with any A2DP Bluetooth headset.
I have tried the following A2DP Bluetooth headsets
JabraBt8040
Link: same as above
Plantronics Voyager 855 Stereo Bluetooth Headset
Lubix UBHS-NC1 Stereo Bluetooth Headset
I think something goes wrong when the Bluetooth stack tries transfer the Skype audio to the Bluetooth headsets it gets all messed up with lots of echoes and sound disconnects and, latency and so on. However playing any multimedia files on the phone work perfectly through my A2DP Bluetooth headset.
Like a said SkypeForPocketPC-2.2.0.18-Beta.cab works perfectly only when you use the corded headset that attaches to the mini usb on the phone, or just the speaker that is on the back of the phone the “external speaker”.
I have also tried to use a whole bunch of 3rd party applications that redirected the sound to my older mono headsets. I tried three of them, and that did not work either. It’s something when the speaker sound gets transferd to any BT device.
(((((( Update I just used the the btaudio.zip that qyach posted: http://forum.xda-developers.com/showthread.php?t=289720
it works but the mono sound is still not very good, nothing like a mobile phone call sound, and no ware near the sound quality with the corded headset that came with the HTC P3600 What to do,, anyone?
Im thinking of getting a ETEN X800 http://www.smart-mobile-gadgets.com/welcome/cart.php?target=product&product_id=1128&category_id=40
I read that It works well with Skype, and the sound is sent to the phones earpiece after installing a piece of software that ETEN developed called Skype Switch, therefore it should work with a BT headset.
http://64.233.169.104/search?q=cache:cwIdCCuH2LEJ:www.etenblog.com/2007/11/13/getting-skype-to-work-as-it-should/+skype+Switch+program&hl=en&ct=clnk&cd=2&gl=us
But now some sales man who sounded like he know what he was talking about, said that the ETEN phones are flaky and that 70% of the ETEN phones that he sells get returned.
I don’t know what to do, but, dam it I want a WM5 or WM6 Phone that works perfect with Skype sound BT and all.
Now the only problem is how much better or worse is HTC V.S. ETEN? I really am looking for a cool looking phone something small and sleek that will work perfect with Skype mobile. The ETEN X800 looked like it was the solution. But now I don’t know what to do.
Someone please help.
Update: 02/16/08
I Just got an ETEN x800 and istalled the Skype Switch and took skype for a test run ,, ya,ya, the sound gets redirected to the earpiece,,, ya, but it sonds like sh_t also..
Someone out there has to be able to Hack this mess.
DTMF ,Fring, PPC Skype, And A2DP.
For the Skype sound problem not going through the BT headset someone on this site suggested using fring which is a fantastic idea, however it’s always something... with fring you can place a Skype out call but during the call you can’t navigate company’s phone menu during the call like, “press 1 for billing” “press 2 for sales”. There isn’t even a dial pad. When I contacted there support department I got this:
Hello,
Thank you for contacting our support team.
Currently, it is not available to dial DTMF sounds on fring, this should be implemented in future versions. You can stay up to date on new releases from our blog http://www.fring.com/blog/
In other words, I’m not holding my breath.
Is there a way to transmit a DTMF signal to the input of a Bluetooth A2DP headset? I don’t mean literally, just a sound redirect, in other words trick it into thinking it’s me making the DTMF sound.
I can’t find anything on the net except for Dial-a-matic, which will not work. I also took a look at Pocket Dialer v1.03 but there is no way to redirect sound. I also thought that maybe Kai’s ContactDialer would work but I don’t think it does, or I don’t understand how to use it and get it to work.
I also wonder if all of these problems are salved on WM6 I was looking at upgrading to the new HTC P3470 but the processor is slower than the p3600.
God,, do I want to get rid of that stupid weird mini HTC usb headset, ridicules for a $700 phone.
I wouldn’t need to go through all this if Skype would just finally fix their PPC version to work with a Bluetooth headset.
(((((( Update I just used the the btaudio.zip that qyach posted: http://forum.xda-developers.com/showthread.php?t=289720
it works but the mono sound is still not very good, nothing like a mobile phone call sound, and no ware near the sound quality with the corded headset that came with the HTC P3600 What to do,, anyone?
Im thinking of getting a ETEN X800 http://www.smart-mobile-gadgets.com/...category_id=40
I read that IT works well with Skype, and the sound is sent to the phones speakers after installing a piece of software that ETEN developed called Skype Switch, therefore it should work with a BT headset.
http://64.233.169.104/search?q=cache...lnk&cd=2&gl=us
But now some sales man who sounded like he know what he was talking about, said that the ETEN phones are flaky and that 70% of the ETEN phones that he sells get returned.
I don’t know what to do, but, dam it I want a WM5 or WM6 Phone that works perfect with Skype sound BT and all.
Now the only problem is how much better or worse is HTC V.S. ETEN? I really am looking for a cool looking phone something small and sleek that will work perfect with Skype mobile. The ETEN X800 looked like it was the solution. But now I don’t know what to do.
Someone please help.
After reading very long threads about this issue, many changes in the registry and some full pda restores, I haven´t found the way to redirect all the sounds to the handsfree in my TRINITY.
Has anyone managed to make BTAudio or any other program work with a Trinity?
I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.
2 Types of Redirect
One is with A2DP where the bt device is compliance to it. I do not have one but I believe it will work fine.
Another way which I am using is via the Handsfree Voice Command channel. When a voice command software(Such as Cyberon Voice Speed Dial) is installed and when the recognition is triggered(usually by a button on headset), all audio is redirected to the the headset.
So the trick is to keep this redirection longer.
This is can achieved by changing two registry settings.
- Change the duration to something longer, like FFFF.
- Invalidate the voice command software execution.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"VoiceCmdDuration"=dword:FFFF
"Path"="\WINDOWS\invalid_sddialer.exe"
With that, I have lost Voice command via my headset but I hardly do VC at all, and if needed, I had associated one of the button on my dopod to launch VC but I need to speak into the phone instead.
Not sure if this is the best way but it's the only way I know of untill I figure out other.
FYI, I'm currently using Dopod D810 with lvsw ROM (http://forum.xda-developers.com/showthread.php?t=299771) and a Motorolla H700.
anonimo said:
I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.
Click to expand...
Click to collapse
Hello,
I agree with this.
I had not been able to get the Trinity to redirect audio to a sony HBH-IV835 heandfree device.
Since I've change for a Sony DR-BT20NX headset with AD2P profile it's working like a charm. No more registry hack or software needed.
Then registry hack only concern improvement of audio quality (bitpool and so on).
Sadly i'm not able to use real stereo (replace the use of joint stereo) because it's generationg a slight annoying hiss sound.
Is this still the status, also with WM6?
I can't believe it's not possible to redirect some kind of way like I've been reading in the Tornado treads.
Yeah, I'm also can't redirect all sound to my headset (Plantronics Pulsar P590) by one click or by launch some program. Every time I need launch BT Settings, open Devices tab, tap'n hold on "590Plantronics", and select "Set as hands-free" or "Set as Wireless audio".
Can't find other ways to do it - no registry hacks, no other...
Does this help maybe?
http://pocketland.de/product.php?prod_id=36311
I did not test it yet...
No, it doesn;t work too... All discussed programs (BTARouter, BTAudioNav, BTAudioToggle) are just redirect phone calls to the my headset. No audio output at all (headset icon doesn't appear).
Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.
clinton said:
Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.
Click to expand...
Click to collapse
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...
peon said:
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...
Click to expand...
Click to collapse
I saw a lot of different registry hack around here..
The one thath works on p3600 is?
I've tried a lot of but no one works.
I dont't need voice dial so it can be good.
I use my p3600 with a BT Helmet.. so I'd like to listen to tom tom inside..
thanks a lot.
Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.
jaaphooi said:
Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.
Click to expand...
Click to collapse
But my bike helmet is not A2DP compliant so I canìt use it.. :-(
Still no solution?
Hi you all,
is there still no solution for the Trinity?
I am actually experiencing the skipping problem, but I would be half-glad if I could redirect audio in mono to the headset.
Please advise!
IsiT_de...
Get headset that supports A2DP profile and it works fine. I have Plantronics Voyager 855 stereo, and it works flawlessly in mono or stereo mode with modifying any registry hacks. Music sounds awesome too with this headset, just like my bose earbud phones.
I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?
Hello,
i'm currently testing a Polycom Voyager Pro UC v2 BT Headset (can be paired with PC and Phone) ...
but i have strange Problems with the Soundoutput... i searched google about that and found many things relating to Phone 7 and A2DP...
it looks like Phone 7 sometimes playes the hole audio trough the headset, even the ringtones... so the phone just vibrates...
also sometimes when the bt Headset is connected the phone reads out loud an incoming SMS message... but sometimes just on headset... and if i don't wear it and i'm not wearing it the hole time i did't hear it and so on....
so my idea is that maybe something can be hacked in the registry to enable/disable/change such features....
i know this from wm6.5 dev that there were plenty of options and also i had there problems too with wrong or no audio routing...
maybe someone can test a bit or can say my what i have to change to get rid of this anoying "features"
thx
Steve
well, first off wrong thread.
Second im not aware of this problem, but in settings>> speech there is an option for that.
Also using a2dp there should be some bad quality if using stock registry settings. here are the new registry values