Related
So which BT headset do U use and it works fine with the JAM...I have recently bought a car holder and now I need a BT headset too...but I don`t know which are compatible with the JAM....any suggestions?....
Regards,
Primoz
Bluespoon AX seem to be the best compromise for size/ battery life...
It is also the smallest on the market and the one which fits the best.
...but is it compatible with the Magician?... :roll:
Regards,
Primoz
p.s. Thanx....I will try to fint this bt headset in my conutry :wink:
I am using one with my magician right now.Any BT headset supporting BT 1.1 and up should be compatible...
Anybody had any experience with any of this 2 devices from Sony Ericsson: Bluetooth Akono™ HBH-602 or HBH-660 Akono™.
Thank you.
I'm using Nokia HS-11W, 2 days so far. So far some good and some bad experiences.
im using akono hbh-600 (without display) and it works.
quappo said:
im using akono hbh-600 (without display) and it works.
Click to expand...
Click to collapse
I heard from some colegs that the SE HBH-65 is not working fine with Qtek...but Qtek 9090...hope the Magician BT stack is different :wink: But I would like to try the product before buy...just to be shure it works fine...:roll:
Regards,
Primoz
I'm using the Jabra 250. It has an amazing batterylife and easily lasts me one or two weeks between charging. I drive mostly 20 minute trips and use it maybe 10 minutes per day on average, so I'm not that demanding a user.
-J
jayjay said:
I'm using the Jabra 250. It has an amazing batterylife and easily lasts me one or two weeks between charging. I drive mostly 20 minute trips and use it maybe 10 minutes per day on average, so I'm not that demanding a user.
-J
Click to expand...
Click to collapse
I will use the BT headset mostly for going to school...it is about 2 hours far away...and I have the lessions two times a week...and of course at the weekends when I go out and have to drive for a while :wink:
Regards,
Primoz
I have been using my new Bluespoon AX all weekend and it is fantastic, i used to have a Nokia HDW2 but could only wear it for a couple of hours because it hurt my ear, but the AX is perfect, so small and you don't realise you have it in, in fact i went to the pub last night and someone had to tell me it was in.
Oh, and i am using imate Jam.
Richard
ricmoo2004 said:
I have been using my new Bluespoon AX all weekend and it is fantastic, i used to have a Nokia HDW2 but could only wear it for a couple of hours because it hurt my ear, but the AX is perfect, so small and you don't realise you have it in, in fact i went to the pub last night and someone had to tell me it was in.
Oh, and i am using imate Jam.
Richard
Click to expand...
Click to collapse
Thanks for the information mate!...i will look for this headset in my country...for the moment I`m on the side of the Jabra BT800 which is disponible in my country...but I will take a look for those U suggest me!
Regards,
Primoz
My bluetrek G2 works just fine !
With my i-mate Jam, I am using a Motorola HS-810. Works very well. The Motorola HS-810 (now being replaced by the HS-850), is very practical because it stays off when you don't use it. It switches on when you wear it, by flipping the microphone open.
The system works well with the Jam as well, when it starts ringing, I just need to flip the microphone open, wear the headset, and press the button on the headset. The connection between the headset and the jam gets established and I can answer the call with no problems and without touching the Jam.
Hope this helps.
Please help, i am runng out of my 14 day return period with o2 (Monday) i am experiencing static with my new jabra bt250 headset. Is this a rom problem as with the orange m2000 or do you think it could be the headset. i was led to believe that all of the static problems with new htc devices were fixed. i need to know as if i have a faulty exec i need to get it replaced quick. many thanks david
I have the same problem with a Bluespoon AX.
If the two are on different sides of my body, static is unbearable.
atekant said:
I have the same problem with a Bluespoon AX.
If the two are on different sides of my body, static is unbearable.
Click to expand...
Click to collapse
:shock: I have bought an AX, I've never made a call on my MDA Pro to date, and my mobile number is being transferred onto t-mob (and my MDA Pro) this Monday.
Can you explain a bit more so I can not look a complete tit at work please?
I've also tried with the Bluespoon AX and couldn't use it. I sold it to a friend who has a Motorola V3 because it worked fine with his phone.
I bought an (expensive) Plantronics Discovery 640 replacement and it's a little better, but still not great. Also concerned that the problem lies with the XDA Exec and wondering whether to take it back before my 14 days are over...
Posted: Fri Oct 28, 2005 09:11
--------------------------------------------------------------------------------
I know this sound very stupid but please try it!
Turn your universal onto it's other end! I have found that when it is in my pocket I place it with the stylus to the top..I get static using my Blue G2. When I turn the universal on it's other end, I don't get static.. Weird huh?
Also, I find that putting it in my back trouser pocket gives me more statid than in my chest pocket...
Has anybody else founf this??
P
It seems to be an issue with the exec, reading around lots have encountered this problem. I'm sure they'll sort it out in the first official rom upgrade
I'm sure you're right. I just hope it's not a problem with the hardware. Anyway, I've tried my 3rd headset now - it's the Bluetrek G2 (only supports bluetooth 1.1) and it's the best by some margin. Nice, because it's a lot cheaper than the other two.
Could it be a problem with bluetooth 1.2?
it might be the positioning of the BT receiver in the exec, dont forget BT is 10M in open air not encased in an exec between a metal battery and a metal backed display screen (see image of taken apart exec in other thread )and through your body too
I was using PDA2K before using the Jasjar, and I can say that the BT performance is far better than the PDA2K but this does not mean that it's perfectd.... it really needs to be improved.
I have also to say that not all types of BT headsets work fine with Universal, I knew from some of my friends using the same device that Motorola family is not working fine with universal.
I used to have a sony ericson BT headset when I was using the PDA2K and used it with my Jasjar for two days also, but I suffered from the short battery life of the sony erricson BT headset so I changed it with Jabra BT 800 and it works far better than sony erricson and I can say it's very reliable with the device.
What I want to say here is that the reception quality via BT headsets varry according to the type of the BT headset.
Moreover, the performance of the BT in universal needs to be improved and they have to consider this issue in their new ROM upgrade.
Regards,
OK I see that some of you already got the device. My wife wants to replace her Nokia N80 for the white version. Now I previously had an Orange SPV M3100 (HTC Hermes) & had no end of problems with that sold it & now happily using an Asus P525. So how about the the Trinity.
-Is it stable?
-Does A2DP & AVCRP work properly as in having proper stereo output?
-Does the A2DP reconnect automatically to WMP after receiving a call (the -Hermes never did, had to restart everything).
-How's wifi reception (the Hermes was crap). She uses wifi a lot as we have 250mins free BTOpenzone minutes a month.
-I looked at the HTC website but it seems they do not supply firmware upgrade support for their devices. So where can you get them officially?
Fill me in guys. Thanks
Is it stable?
I don't feel it's very stable when coming to the phone part. If I've used the device for a while, I often have to hard-reboot it for the phone part to work again(it just stands "calling", and nothing happends)
-How's wifi reception (the Hermes was crap). She uses wifi a lot as we have 250mins free BTOpenzone minutes a month.
The WiFI reception on my phone is very good. I've actually managed to connect to hot-spots which my laptop didn't manage to connect... *me like*
-I looked at the HTC website but it seems they do not supply firmware upgrade support for their devices. So where can you get them officially?
In Norway you get the official firmware updates/rom from the local distributor.(Dangaard and Brightpoint)
What about other features, like those related to the cameras?
How is visiophony with the front camera?
How is the picture quality of the back camera? Most of the reviews are made with good light conditions. What about the pictures in low light condition?
Movies? Are they correct?
Battery life with that 400 MHz processor compared to Prophet?
Could anyone post pictures/movies made with Trinity?
The wifes P3600 arrived this morning. Been playing with it all for a while & here's my 1st impressions.
Good
Looks nice & shiny
Small size
Excellent loud clear external speaker
Nice & responsive
Phone reception & general operation is fine
3G works well
Bad
Shiny surface = fingerprint magnet
MS bluetooth stack, better than before but still lacking
A2DP implementation. Not real stereo, only mono out from each channel
Also when disconnectd from WMP it doesn't auto reconnect.
In summary if you used previous HTC devices before then you'll be familiar with this one. When used as a pda & phone it does most things as expected, the menus & general operation are same as before.
But its going back, one of the main reasons being the crap A2DP. Wifey uses music player a lot on her 1 hour daily commute & the fact that sound quality is rubbish (low volume & no stereo) & no option to connect a wired headphones as theres no headphone jack. The same problem as the Hermes in that once disconnected from WMP it doesn't auto reconnect. Have to go into Bluetooth manger to re establish the connection.
Also comparing it to my Asus P525 other than the smaller size, 3G, louder external speaker & looks a bit nicer, in all other depts the Asus is as good & some areas much much better.
Well, my opinion is that the camera sucks... Was on a party this weekend _with_ good lighting, all the picutures came out blurry *argh* (could be it was too much light tough?...)
The videotelephony-part on the other hands is quite good(for videotelephone, NOT for taking still-pictures).
And I also don't like the 2-7 sec. delay when you try to call someone... *argh*
neofix said:
Well, my opinion is that the camera sucks... Was on a party this weekend _with_ good lighting, all the picutures came out blurry *argh* (could be it was too much light tough?...)
The videotelephony-part on the other hands is quite good(for videotelephone, NOT for taking still-pictures).
And I also don't like the 2-7 sec. delay when you try to call someone... *argh*
Click to expand...
Click to collapse
2 to 7 second delay? It sounds like a ROM upgrade will probably be coming to fix these issues...same story different cover.
zen123 said:
A2DP implementation. Not real stereo, only mono out from each channel
Click to expand...
Click to collapse
This sounds new to me. I am using a SonyEricsson stereo BT thingy with my Qtek S200 (with A2DP hack) and as far as I can hear the output is stereo not mono from each channel.
I love mine compared to my Exec! Quicker and sleeker.
And got my 4GB miniSD this morning and it works fine
anonimo said:
This sounds new to me. I am using a SonyEricsson stereo BT thingy with my Qtek S200 (with A2DP hack) and as far as I can hear the output is stereo not mono from each channel.
Click to expand...
Click to collapse
Yes, proper stereo could be possible with a registry hack but how many end users are to know that? Only the hardcore users frequent forums such as this & get to learn a lot about their devices. Assuming it can be done then why didn't HTC enable it in the first place? Mention a registry hack to the vast majority of users out there & I'm pretty sure you'll be met with a lot of blank expressions & ??????
With the aesthetic design of the trinity I think HTC are trying to market it to more mainstream audience, thats why my wife likes the look of it, but in all honesty how many of these new users will know how to exploit the device to the full. My wife never visits these forums & even her 8 month old Nokia N80 is still out of the box stock.
zen123 said:
Yes, proper stereo could be possible with a registry hack but how many end users are to know that?
Click to expand...
Click to collapse
I thought the registry hack was only to enable A2DP on those devices where the manufacturer had disabled it and the end result of a hacked S200 would be the same of a standard TyTn or a standard P3600... Are you sure the P3600 output is not stereo?
anonimo said:
I thought the registry hack was only to enable A2DP on those devices where the manufacturer had disabled it and the end result of a hacked S200 would be the same of a standard TyTn or a standard P3600... Are you sure the P3600 output is not stereo?
Click to expand...
Click to collapse
Pretty sure its not stereo, either that or the stereo separation is really poor because it sounded like mon to me. In saying that though when I paired my iTech R35 stereo bluetooth clip with it there was the option to tick headset mode & stereo mode but its too late now I've sent it back today.
The only dislike on my new P3600 is the position of penon the bottom! . I've used many pda, and the pen was on top! But for the rest I love it!!!!
zen123 said:
Pretty sure its not stereo, either that or the stereo separation is really poor because it sounded like mon to me. In saying that though when I paired my iTech R35 stereo bluetooth clip with it there was the option to tick headset mode & stereo mode but its too late now I've sent it back today.
Click to expand...
Click to collapse
You are right the stereo bluetooth output is not stereo. This is ridiculous. I hope this can be fixed with some registry hacking otherwise HTC has really screwed this device big time.
One more thing, the smooth black coating is comming of from the bottom where the stylus is placed.... That's s REAL bad thing, since this will eventually tear up more and more of the coating... And I've only had it for two weeks
default A2DP registry settings for Trinity is:
UseJointStereo = 1
please change to:
UseJointStereo = 0
that will fix the "mono sound" issue.
Question
So far what i read, the software for this phone 3600 is not fully stable,
Camera still delay..
Some bugs
additional question following,
Delay of standard programs opening?
How about the sounds quality (loudness and clearness) is it very good?
which one is really better if compare 3600 and 3300(GPS enabled), which should i buy... -_-"
Thank you in advance..
fantastic device
Got my Trinity since yesterday. I had several phones and pda before (Dell Axim x51v was the last one) but the Trinity is the best until now. small enough, fast enough... if I only could get MMS to work for vodafone germany...
saminegm said:
Got my Trinity since yesterday. I had several phones and pda before (Dell Axim x51v was the last one) but the Trinity is the best until now. small enough, fast enough... if I only could get MMS to work for vodafone germany...
Click to expand...
Click to collapse
Did you try these (manual entry and cab for Vodafone):
https://shop.dangaard.de/files/Qtek/Qtek.htm
Tytn and Trinity 3G/UMTS should be the same
So far...the trinity is my new favorite thing..very stable (have had to soft reset twice to get the Wifi signal running after a sync while wifi was on) and lots of fun. Phone is great and signal with one bar or less is still usable - where my old motorola was no good with a weak signal...and i can now make and take calls from my office - where previously there was no chance with the motorola. This device does everything I bought it for -combine my PDA and phone into one device...
where to buy
DaveUK said:
I love mine compared to my Exec! Quicker and sleeker.
And got my 4GB miniSD this morning and it works fine
Click to expand...
Click to collapse
Can you please said where did you buy the miniSD? Thanks
Is there any perfect solution to resolve Trinity A2DP sound drops problems?
I'm using i.Tech Clip Radio and i have SE-970, I tried to use MSI Blue player for D810, the sound is great but it seems the problem not stable at all. Anyone can resolve this?
I hope we can resolve those problem and our Trinity will be the perfect machine at the moment.
Cheers!
i used the fit4cat or whatever it is called nowadays- from the trin upload page- and it worked great- i used X5 Blueant headphones with mine and they work great- got them cheap from planetwireless.
MontAlbert said:
i used the fit4cat or whatever it is called nowadays- from the trin upload page- and it worked great- i used X5 Blueant headphones with mine and they work great- got them cheap from planetwireless.
Click to expand...
Click to collapse
Thanks for your comment, can you e-mail the program to me since i am newly joined here. and i really don't know where i can download.
[email protected]
Many thanks!
yuktat said:
I'm using i.Tech Clip Radio and i have SE-970,
Click to expand...
Click to collapse
I have itech iiis and i dnt really know how you can make it to work with dopod810.
Could you please help.
I have Sony BT headphones (the one without the caller ID display).
I am SO CLOSE to returning them! I increased the quality on my phone (with the Dopod ROM) and made it stereo....but it sounds like they are singing through a tin can (meaning there is this tinny sound on voices---but it would sound perfect if that was gone).
Has anyone found a way around that?
BT -- I guess it hasnt been perfected yet for A2dp
I just recently acquired a stereo bluetooth headset from dell model number BH200 and so far the stereo music quality is superb, but the moment a call comes in or I pick up a call it immediately disconnects itself. My question would be if any of you guys have any experience with this issue. the Stereo bluetooth and handsfree profile are both set to active. Any suggestions or hints?
I'm going to go on a limb here and assume that you guys haven't had access to the aforementioned bluetooth and i'm short out of luck here... right?
p.s. SAY IT AINT SO!!!!
Hi, I also have the same headphones and the same problem - only on HTC Universal flashed with WM6.
I search a bit on Google and it seems that the problem is with MS Bluetooth stack - it was working correctly for WM5 (but no A2DP), now in WM6 A2DP works, but handsfree does not.
Right now I'm testing alternative BT stacks - started with UniBT (it's Broadcomm stack modified for Universal) - now A2DP works flawlessly (before that, it didn't), but handsfree/headphones mode does not. At least trying to receive the phone call doesn't turn the headphones off.
i tested my fuze with a jabra bt2010 and it works fine. I'd prefer to not carry 2 bluetooth devices so i'm trying to find a way for it to work. I've been suggested to use a widcomm bluetooth stack as well but i dont know how to change my stack. If anyone here does know how to do it, please do enlighten us.
It's been nearly a month so I'm going to bump this thread in hopes of someone might possibly have some insight into this.
Push/bump.
I got the S9 now, it works for both functions but craps out completely when i'm outside, really bad signal reception as well as "muffled sounds" according to my audiophilic and audiophobic friends.
I think it has to be something to do with the actual firmware inside the bh200 that is wreaking some unknown havoc.
Dell bluetooth headset BH200 not working with Sony Xperia X1i
I have a Dell Bluetooth headset model BH200 and in A2DP mode, works flawless but the moment it is used with handsfree mode for call, the connection is broken and the headset switches off itself. This headset works very well with other non WM6.1 devices. Any clues with anony one what should be done in this case, some people have suggested JETware Hands-free Extension , any one tried on this.
I actually gave up on the bh200 and got myself a jabra bt8010. it works like a charm and the sound is just as good as the bh200
Indeed... i used to have a WM device (Mio A501) and I had the WM6.1 Pro..
I bought this BT at that time and it didn't work on WM6.1 (it even didn't asked me the PIN to pair it) but, when I tried with WM5.0, everything worked great, great sound on call's music, etc.. now I have a Sapphire and I'm not able to make calls on it (music works), but since I'm not driving and people used to look like "what a crazy guy speaking in English alone, no cables, it must be a mp3 or something.. hmmm" when I was on a call, it doesn't make a huge difference
i have yet to try this on wm6.5 but I highly doubt there would be a change..i'll give an update when I do charge up the bh200
i charged the bh200 up completely and tested it out.. it was a failure.. looks like 6.5 did not do anything to help...
Maybe windows mobile 7 will work.......... maybe.
You can use BH200 on call by this way only(I tested)
1. Turn on BT
2. Accepted call(However just Turn on your BT after accept call is OK)
3. Turn on BH200
4. Pair ur PDA w/ BH200
5. Done
IS this thead still active? I have a solution
Guys..
Use Reg edit and make the following modifications in your WM device by creating a new DWORD value 0 with the parameter UseESCO. Check out the path
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\UseESCO = DWORD:0 (Dont use space between UseESCO)
Then restart the phone and delete any previous BT devices on your phone, start up the paining process and get it to work.
worked flawlessly on my Dell BH200
Thanks,
Raj.
seriously????
the fix is in one freaking registry tweak????
I'll have to wait 2 months before i can test this since i left the damn thing to rot in the US while i'm here in thailand..-_-
mputtr said:
seriously????
the fix is in one freaking registry tweak????
I'll have to wait 2 months before i can test this since i left the damn thing to rot in the US while i'm here in thailand..-_-
Click to expand...
Click to collapse
Of course Bro. I waited for 6 months myself too.. and finally found it in a microsoft forum.. well at last got it to work and my 200 sounds better than ever with its new functionality..
All the best
Raj
sweet! thanks a bunch man!
prudviraj said:
Of course Bro. I waited for 6 months myself too.. and finally found it in a microsoft forum.. well at last got it to work and my 200 sounds better than ever with its new functionality..
All the best
Raj
Click to expand...
Click to collapse
Heya, Finally got back ot he US and tested out the BH200 with the fix you mentioned. it works!!!!!
although, i'm wondering if you're having problems with the bh200 not wanting to connect to the phone automatically.
Need help for the same problem in android
I am having similar issues on my Nexus one. Dell BH200 works for music playback but stops functioning when a call is made or received. Even the connection between the phone & BH200 gets lost.
I would be really glad to get some help on this.