hi, I use htc phones to connect my pc. But htc shift has no miniusb and no wmodem software? It is posibble to use it through usb port to pc without vista run? When it is posible sdcard, it cam be posible usb from wm side?
Related
I would love to take advantage of the Jam's USB client port and Windows Mobile 2003 native support for USB hosting.
This is a request: Please cook up a ROM that includes a USB Host controller! That way I can use any USB keyboard, etc I like!!!
Please Help!!!
Hi,
There nothing to do with ROM
The USB Port is Client but can't be turn Host by a ROM.
This is a hardware problem...
Hi guys!
Is it possible to connect a pendrive to the Jam in order to transer the files from pendrive to Jam?
No - this requires USB host control or USB on the Go, which the magician doesn't have.
V
Actually, the processor in the magician HAS usb on the go support, and the magician itself has an usb on the go port. I don't know if the operating system has the required drivers, but the hardware could do it.
Wow, cool, I didn't know that.
Do any of the HTC devices have on the go facility working then?
V
Please help!!!!
I have an Orange M3100 (Hermes 100 /TyYN) which is running WM6 (LVSW Edition).
My device synchronises with my computer running Vista and Mobile Device Center 6.1
I purchased the HTC TyTN Y Cable (http://www.expansys.com/p.aspx?i=145071) to allow me to charge and unit and use the Hermes as MP3 player in the car.
The cable didn't work until I installed the following driver - http://www.europe.htc.com/support/software/htctytn.html
I used this instruction hack to get the driver installed -
http://www.expansys.com/ft.aspx?i=145071&thread=1
I have attached the cab file I used to this thread.
The cable now works perfectly in the car BUT this morning I connected the Hermes with the normal USB lead to my computer and I can't sync. The following message appears on the phone:
To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer.
Any ideas?? I need to use synch for work purposes so I really stuck.
There is no uninstall (remove programs) for the driver and I really don't want to reflash a new rom if it can be avoided. (This is the worse case scenario.)
Thanks!
WM6 ROM with Driver
Just a thought is there a WM6 ROM with this driver already integrated???
The driver you've posted, maybe disable the "transfer data check" when power is connected.
The Y cable HAS NOT the pins 4&5 (on its mainboard are 1&2) jointed, so before the driver installation, the pda was unable to charge.
Note: if you connect a cable with pins 4&5 jointed, the sync doesn't work
When you've installed the driver, maybe it has disabilited the "data check" (from USB DATA pins) and "joint check" (pins 4&5) and something goes wrong..
Need more tests, with and without the Y adapter, however all should be ok with an HReset (and you've to joint the pins into the Y cable, that you cannot use to syncronize)
SkizZO
Thanks for the reply.
The Y cable is only used in the car (for audio out and charging) so the Y cable is not used for the computer sync. I simply use the standard computer usb sync cable to synch with the computer. I did however try using the Y cable for the computer sync and it didn't work.
Most bizarrely the computer sync worked perfectly this morning for no apparent reason - I definately didn't change any settings. The only thing is I didn't connect the Hermes to the car enroute home. I wonder does the driver get confused switching between the Y cable and standard USB synch cable - maybe the device requires a soft reboot between switching between Y cable and USB cable?
I'll try it over the next few days and report back on the findings.
I am running Black Edition 3.0.1 and before installing your cab, my y-cable didn't work. I just installed it and my sync with Vista still works perfectly fine as well as the y cable!
So no problem here at all.
any soft that will alow my ppc to connect to a camera by usb? for example in a car I want to use a webcam for rear view, connected to my trinity.
only usb host able devices can use usb devices trinity is not an usb host device
how about a host cable or a hub usb?
Try the WebCamera Plus
www.ateksoft.com
yes, and put my trinity on the bumper....
Hi im new here
I got my hd2 when it first came out running winmo 6.5 now i just cant connect it to the computer tried more than 1 computer and more than one cable when i connect it only charges i receive nothing on the computer like i used to before i have tried everything in the setting usb to pc still same thing
please help me how can i connect it
and i also tried hard resetting it more than once same thing
under settings tab -----other , there will be a usb to pc button
I bet you have tried all setting changes so since you have done a hard reset and it still doesnt work, it has to be your micro USB cable. I had the exact same problem as yours and i feared that it was the micro USB port that was faulty. But then i tried a different micro USB cable and it works perfectly. Hence, it is likely to be your cable. Im not bad mouthing HTC because of the amazing work they have done, but their accesories seem to be a bit down on quality. My original micro USB cable is now frayed and almost severed, my Touch HD micro USB is also frayed and the original earpiece is now experiencing audio balance issues.
the thing is the cable that comes with the hd2 i lost it but when i was using it i could connect
but now im using nexus one cable and Nokia n900 cable to connect to the computer and it just charges like i said nothing appears
Have you tired different ports in your computer or tried reinstalling the drivers? To do that, uninstall the Activesync or Windows Mobile Device Center in your PC and reinstall it. Then try. If you still cannot connect your HD2 to the PC for USB mode, then im afraid the micro USB port in your HD2 is faulty. Try the above. Meanwhile, use the SD card method for flashing or transfer files using wi-fi or bluetooth.
Good Luck
If your HD2's USB port doesn't work you can connect to ActiveSync via bluetooth. I do that very often for a quick synchronization, and since HD2 has an Activesync profile it's easy to configure...
Anyway, check that "accept USB connections" option is selected in your pc ActiveSync configuration.
Most probably, he's facing the da** usb port breaking issue.
kawshigan said:
Have you tired different ports in your computer or tried reinstalling the drivers? To do that, uninstall the Activesync or Windows Mobile Device Center in your PC and reinstall it. Then try. If you still cannot connect your HD2 to the PC for USB mode, then im afraid the micro USB port in your HD2 is faulty. Try the above. Meanwhile, use the SD card method for flashing or transfer files using wi-fi or bluetooth.
Good Luck
Click to expand...
Click to collapse
from where can i download windows mobile device after uninstalling it?
You will find it here.
Thanks for everyone who hellped it turned out nothing was wrong with my hd2 cause i tried connecting my cousins hd2 using the cable i use it didnt work
turned out i must connect the original hd2 cable