HP6815 - iPAQ rw6828, XDA Atom General

Hello
I have HP6815 stand up there now WM5 the company where I work now uses novell with groupwise Gladly I want uses now WM6 am use it possible then with WM6 with novell and am possible I thus sync with groupwise. and WM6 on the forum I can use which then.
Sorry for my english
Thanks

Related

Wizard and SyncML

Does anyone know about the SyncML capabilities of the Wizard? I need to sync it using linux and multisync/kitchensync.
And hopefully, with its WLAN module, it wil finally be possible so sync a businessphone using linux without hours and hours of try and error.
If the manual is right, the Wizard supports only ActiveSync and has no SyncML implementation. Can anyone confirm this? Anyone who successfully syncronized his evolution/kontact application with ActiveSync of the wizard?
Hi there,
There's no SyncML functionality in activesync, It's Microsoft, they don't like openstandards.
You can use the synthesis syncml client (http://www.synthesis.ch/ )
and try it 30 days.
We use it to sync with Novell GroupWise, works very well!
Greetings,
Wouter
Thanks eendje. I searched for more applications like this and found http://www.sync4j.org/. Sounds like a GPL Version which works with Windows Mobile, too. Experiences are appreciated, but I think I will try it out and post mine. If it does not work, it will be an expensive tryout. :?
theRealAfroman said:
Thanks eendje. I searched for more applications like this and found http://www.sync4j.org/. Sounds like a GPL Version which works with Windows Mobile, too. Experiences are appreciated, but I think I will try it out and post mine. If it does not work, it will be an expensive tryout. :?
Click to expand...
Click to collapse
Hello Afroman.
Did you have any luck using sync4j. I have tried to use it but only get error (on my BA). I have used synthesis syncML (Pro editioN) and it works very well with mobical.net. Check it out.
M

Anyone has the cab file for Intellisync for WM 5.0?

Hi all,
I am really desperate: since I have switched from WM 2003 to WM 5.0, the old sync client of Intellisync does not work anymore.
Anyone who can provide the latest sync client cab which works with WM 5.0 for me to test it?
TIA
[email protected]
anyone?
You mean for your pc or pda?
PDA it's built in isn't it?
PC download it from MS.
V
no I mean the sync client from Intellisync which is part of Intellisync mobile suite. I need it the cab-file for my wizard. My company's exchange server has the corresponding intellisync software on board, but does not let me download the cab file that I need for my wizard to sync with the exchange server. Previously with my older magician (wm 2003) it worked.
This is the latest installer I have on my Intellisync server - works on my WM5 devices.
Regards - John
thank you sooooo much!
What version of Intellisync is that? I have version 6.5 on our servers and was just curious is that one was newer?
markwica - no problem, glad I could help
kjason - Its a 6.5 client (6.5.5.15 I think...dont have my PPC in from of me )
Regards - John
INTELLISYNC
Hi Everyone.
I notice intellisync here for wm5.
I was wondering if you need to have a subcription to a service to use this.
will this be un alternative to you owne EX. server with Push?
please some feed back! is it good to invest in it?
Thank you

Fax software

Hi,
Does anyone already have a solution? This is the only, but big drawback that I have with my Qtek 9000.
Thanks,
J Fonseca
JFONSECA said:
Hi,
Does anyone already have a solution? This is the only, but big drawback that I have with my Qtek 9000.
Thanks,
J Fonseca
Click to expand...
Click to collapse
I used to have kse truefax, which worked a treat - but that was on orange.... who set me up with a second exclusively fax/data line with its own number.
Bloody O2 dont do that.
i use tascal fax viewer.
it is free and works
http://www2r.biglobe.ne.jp/~tascal/download/pocketpc/index_e.htm
hollytree said:
i use tascal fax viewer.
it is free and works
http://www2r.biglobe.ne.jp/~tascal/download/pocketpc/index_e.htm
Click to expand...
Click to collapse
Does that allow you to receive faxes to your device?
It doesn't work
Hi,
I tried that software, but it's only to view fax files, it does not allow to send or receive faxes.
i'll keep looking for a working alternative.
Thanks,
JFonseca
Hi
I found this one on a Yahoo Group:
http://www.samtechnc.com/eng/introduction/mfax_intro.htm
It should work on my Qtek 9000, but i was not able to try, because i don't have enough skills for that.
Maybe someone here can try and post their experiences
Mfax is for PocketPC 2003. I asked them when they may make it available for WM5 and got the following reply;
"Right now we do not know if and when we will be able to support Windows Mobile 5.0 Pocket PC Phones with our software.
The problem is that the modem i.e. network manufacturer (Qualcomm with their CDMA network) is not supporting fax class 1 or 2 in their system. Therefore we are not able to support the WM 5.0 Pocket PC Phones (or the CDMA based WM 2003 Pocket PC Phones). Furthermore HTC is - due to the lack of support from Qualcomm - not able to support us either.
So we are stuck in the middle. As long as Qualcomm doesn't set a higher
priority to the fax class support within their network (modem) we can do
nothing about this issue.
As soon as they would change this issue we would immediately be able to
support WM 5.0 Pocket PC Phones as well as CDMA phones using their network.
Frankly, I do not think that this issue will be solved soon. Faxing is still
seen as not important by the big companies (which I certainly do not agree, but we do not have a lobby or a direct contact person at Qualcomm, who has the power to change this)."
Maybe we should start lobbying Qualcomm.
We are MFaxCE's developer
We are the developer of MFaxCE. Actually, we have already ported our MFaxCE to WM5.0 successfully, but we found that HTC have changed a lot or haven't open the port for fax on WM5.0 device, we still fail to send/receive fax on WM5.0 right now.
However we are working with some manufacturer who is willing to modify their driver to make our MFaxCE capable of fax on their WM5.0 device. And we are also looking forward that HTC can do some modification or disclose some information to us, so that we can make MFaxCE compatiable with all the HTC WM5 device.
We will keep you posted about any news in the future!
samtech said:
We are the developer of MFaxCE. Actually, we have already ported our MFaxCE to WM5.0 successfully, but we found that HTC have changed a lot or haven't open the port for fax on WM5.0 device, we still fail to send/receive fax on WM5.0 right now.
However we are working with some manufacturer who is willing to modify their driver to make our MFaxCE capable of fax on their WM5.0 device. And we are also looking forward that HTC can do some modification or disclose some information to us, so that we can make MFaxCE compatiable with all the HTC WM5 device.
We will keep you posted about any news in the future!
Click to expand...
Click to collapse
any news ?

Emulate WM4

Hi there,
I need you expertise, as our company recently rolled out a PPC encryption software alled PointSEC, which will be automatically installed on our PPC, as soon as we connect them to our company laptops for sync.
The only work around to avoid this installation seams to some kind of emulator for my tytn, which identifies the device a a WM4 or older towards MS active sync, as the new PointSEC software is only compatible with WM5 or higher, and therefor does not install on WM4 or older devices.
Is there any kind of software, which makes the PPC WM5 looking like WM4 towards active sync?
Thanks for your help.
Kind regards,
ARo

office mobile and outlook mobile in wm5 , is it possible ?

how can i use outlook mobile with my wm5 hp rw6815
http://www.microsoft.com/windowsmobile/software/outlookmobile.mspx
ms says , it is possible with wm5 but i couldn't find any download link ?
cancakmak said:
how can i use outlook mobile with my wm5 hp rw6815
http://www.microsoft.com/windowsmobile/software/outlookmobile.mspx
ms says , it is possible with wm5 but i couldn't find any download link ?
Click to expand...
Click to collapse
I have no idea what you mean.
Outlook Mobile (including Outlook) is integrated into WM5, so what else do you want?
i mean the new version which has html mail support ?
Take a look over here.
http://forum.xda-developers.com/showthread.php?t=332748&highlight=office+mobile
Especially here:
http://forum.xda-developers.com/showpost.php?p=1556679&postcount=24
I'm not sure that this includes Outlook Mobile.
thank you but those files include only office 6.1 and doesn't have new outlook application.
I'm pretty sure that the new outlook only comes with wm6... and even if you can get it elsewhere, you must be connected to exchange 2007 to get HTML email.

Categories

Resources