hey guys, it was last week when i do rom update for the first time. i didnt do any hard SPL because it was my first time to update it ( i really dont know what to do, i thought the update thing is just like SE/Nokia phones ), it stops at 48% and cant on anymore, only can enter boot loader. So i was very confused and i tried and tried to update it again and again, didnt work at all. Few hours later, i called up a friend of mine and send my phone to him and hope that he could clean the mess that i make. After he check the device, he told me that my SPL is screwed, and he said he might unbrick my phone, and so, he unbrick it. But the other problem is, there is no sound frm the speaker eventho im playing a sound in the device, i insert a sim card into it and no network is detected, i cant connect it to activesync. and eventho i unplug the usb cable, the charging icon will not go off ( it shows "connected and charging" ). my friend says that it is the radio ROM problem, and he dont know why he cant reflash the radio rom. any help?
Hi, I can't help you with your problem, I'm sorry, but I want to tell you something. I bought my Qtek S200 Used, and it was "broken" (it couldn't boot). Whit the help of this web I flashed it and it works perfectly, except that I have a similar problem, when I plug in the charger, nothing happens, lets say, no lights, and the icon, with or without charger, it always shows like it's charging, I couldn't saw ever the battery status. If I go to Settings -> power, it says Battery Status: UNKNOWN
BUT it charges when you plug the charger. I really don't know what the problem is, but you are giving me some hope that maybe it's a software problem.
I couldn't change the radio rom until 2 weeks ago or so, I flashed it with another rom and the problem is the same, nothing have changed. Do you have any clue? what radio rom where you using ?
Good Luck =)
PS: The active sync recognizes my phone but i couldn't ever synchronize it . I don't have any other problem, the speaker works well as the other things also.
Can you get access to another battery?
It should be possible to flash a radio ROM when the device is in bootloader.
hmmmm. i my activesync wont even recognize my phone at all =( tried to change the battery but wont work. i send it to the repair service center and they said that its the radio rom problem and they said that the only way to solve it is to change the mother board which i know its not the mother board problem and the mother board cost around RM800 (200 usd).... even in bootloader the phone wont connect to the comp.....
i know that maybe it's stupid to ask, but have you tryed with another cable?
When you are in bootloader and you connect the phone to the pc, the "USB" label shows itself there or not?
I'm asking because i had also some strange problems with my prophet, but always when i've plugged it, it sayd 'usb'.
yes, i did tried another cable. and it shows USB in the device when i connect it to the comp, even when i disconnect it from the device, it still shows USB and Charging. And no connection detected from the computer, not even activesync.
I really don't know what to say :S
We'll just have to wair until some of the geniuses of this forums gives you an answer :S
Have you tryed another pc
Related
Guys,
I need help here, a few days ago, I changed my USB since all of a sudden, the phone can't be charged. Then, after the USB got changed, I am able to charge the Wizard... but the strange thing happened, my comp does not recognize the Wiz, it does not even show any device at all. I tried to do all the stuffs, like:
- install/uninstall Active sync
- update active sync
- restart comp several times
- even hard reset my Wiz a couple times
All of em are not working. Would any of u guys have this problem before? Any ideas why? Is it time to say good bye? =(
do a system restore to a date you know that worked. something happens with the usb drivers and the way the phone talks to the pc, not sure on the how or why. but whenever i downgrade, when i go to install the new rom, it says unrecognizeable, system restore usually does the trick.
I forgot to mention that I did bring it to the repair shop, and all the computers that they have cannot recognize my phone... when they plugged in their USB to my phone, their activesync can't recognize it even though it's charging...
So, I don't think it's the problem w/ my comp. Anyone has any other ideas?
Thanks tho...
rluke83 said:
Guys,
I need help here, a few days ago, I changed my USB since all of a sudden, the phone can't be charged. Then, after the USB got changed, I am able to charge the Wizard... but the strange thing happened, my comp does not recognize the Wiz, it does not even show any device at all. I tried to do all the stuffs, like:
- install/uninstall Active sync
- update active sync
- restart comp several times
- even hard reset my Wiz a couple times
All of em are not working. Would any of u guys have this problem before? Any ideas why? Is it time to say good bye? =(
Click to expand...
Click to collapse
Go to this page and get a new PC USB cable or cradle. It may also be the internal USB port on your device.
http://www.daydeal.com/home.php?cat=1809
EDIT:: It could possibly be a virus on your device. I hate to say that but I just remembered that a friend of mine had the same problem when he got a virus on his device. Also, have you ever dropped the device or gotten it wet?
Hello
I'm having some USB problems:
The device seems to disconnect after a few minutes, sooner with intense usb activity (like copying files)
I tried with 2 cables, 3 computers and with both XP and linux
However 3 days ago it didn't seem to act like this, altough at the time I didn't use the device so much (I was busy exporting/importing the contacts into HTC)
I tried hard reset, didn't work
I can only think of 2 possibilities: either there is a problem with the usb driver in the device, ori there is some problem with the electrical connection somewhere on the device
So, the question is - does anyone else experience the same problem?
Thanks
I think, that device disconnects when it goes to sleep mode (my device does it). When it is on USB, it acts like it it on charger, so simply make charger sleep time longer. It is quite annoying, but only solution so far.
No, it's not that, my device doesn't go to sleep when connected to a power source, anyway I tried to disable sleep mode completely and it still gets disconnected.
Interesting, the device still belives it's connected (I see the icon at the top of the screen), but the PC end is down.
Never had such issue. Maybe you could try to contact HTC Tech Support... But as the hard reset didn't help, I'm sorry to say, maybe you should consider a warranty claim. Might be a bad connector or something.
Ups sorry, i didn't read correctly the original post.
Maybe, it´s will be the energy-management from PC?
Look in device-manager in the properties of the USB-Port, try to disable the "Energy management". Please post the result here.
Greetings Mirko
Tried that too. Same result
Hello 4EST,
please use only the origional USB cable to connect PC and XDA! You got to pull the Mini USB side as you can´t see the silver part!!!
The connetion lost when you act at the cable?
Somethimes it seems only to be connectet right.
Greetings
Rescue01, I used the original cable, the problem is exactly the same.
Here is an update:
I sent the device for reparis to HTC. The device came back "reflashed", but the problem still pesisted from the first power-up. In other words, they fixed nothing, didn't even bother to check if it worked right
I sent the device back again for repairs, very angry, talking to the call center. This time they opened the device (I can see it on the screws), did something to it, then reflashed the device again.
And it worked perfectly, with all the cables and the computers I tested before........for a while....... Because after ~4-5 days of usage the problem started to reappear more and more.
Now, as I just tested, the USB gets disconnected after only 5sec of reading from the device. Sometimes it lasts longer, like 2 min
So my opinion is that there is an electric problem, I would guess with the USB connector
Unfortunately for me, the service center even if they fixed the problem last time, they did NOT checked for it before fixing it and assumed everything was ok the first time and blaimed the USB cables/computers for the problem. They said something like "sadly, after checking the electrical connections and reflashing, the device works perfectly". And it did for a few days...
Here is an update:
I send the device for the 2nd time to the service center, this time calling them angry about not fixing it for the 1st time.
The device came back quickly. This time they opened the device (I can see it on the screws), and the USB connection actually WORKED!..........for a while.....
After 3-4 days it started disconnecting again, having less and less USB connection time.
Now I have to try to get it conencted, as sometimes it disconnects right after connecting
Here are some videos:
http://www.youtube.com/watch?v=pfuWrAGgCNE
http://www.youtube.com/watch?v=uZQMFyexyVI
http://www.youtube.com/watch?v=gNzH73ZdAow
http://www.youtube.com/watch?v=ziklj6Byp_g
http://www.youtube.com/watch?v=FdB5F2IuKCA
Firstly,i would like to apologise for making another thread with the same topic if there's any.I've searched the forums and most of the threads seem to be 'Dead'.
Last week,my phone had something strange going on.When it's at sleep mode,it automatically lights up.I picked it up and i see this thing called the 'Navi-Panel'.The screen was in landscape mode.The only thing that i can access was the phone.I managed to exit the Navi-Panel through the task manager but the problem's still there,my phone and my SMS are in landscape.Also,the phone calls that i make and received are always on loudspeaker mode.I also cannot connect the phone to the computer via the USB. I've tried various ways to fix the phone such as hard reset and rom flashing but it's still the same.I'm currently on the Stock rom version 1.66.707.1(76641) WWE. Can someone post a solution for my problems?
It happened to me twice when a tiny drop of water dropped on the micro usb slot, creating a temporary short circuit.
Make sure the slot is clean, (no conductor material inside).
It may be a small chance, but it is still a chance...
I have the same problem
My phone got wet last night due to rain. And the Navi panel kept coming up. So I set the option for Navi panel not to have an automatic launch. Thats fine now, but I got another problem to sort through. When ever I pick up a call the speaker is automatically turned ON. Its embarrassing now. I am just hoping its temporary..
If anyone has an idea on how to turn off the automatic speaker on call pick up, pls let me know.. Thanks in advance.
Whats more is: I cant connect to the Activesync now. The phone is charging well though.
I can probably live with that since I can connect through Blue Tooth. Hoever, if someone has any idea on how to turn off the "Auto external Speaker mode", pls let me know .. any registry key ... or any other means.
Thanks in advance.
This happened to me a few months back now on a wet evening, assuming the phone must have got wet through my pocket. Tried everything to fix it, left it to dry out for 24 hours near radiator with the battery out to no avail. But then flashed a new ROM and it started working. (Had to flash the same ROM three times till it started working. Every ROM since has been fine)
Hope this helps.
Thanks .. That gives me a hope. Could you pls tell me what ROM you flashed.. may be its something to do with that specific ROM..
Activesync died...
Thanks all of you who contributed to the forum. My HD2's activesync stopped working yesterday... and main challenge was to put shipped ROM and send it to the repair...
There is only one thing that I could not explain... When OS is up and running (regardless whether it is cooked or shipped) there is no active sync can be established (only charge function is working). However, when phone is in boot loader (RGB screen) I could connect it thru USB and install ROM from computer...
switch off quick sync on HD2
XAH said:
switch off quick sync on HD2
Click to expand...
Click to collapse
Thanks for trying to help XAH, but this was the first thing in my troubleshooting process. Usually it helps when you plug in the phone, computer acknowledges it, but pop in warning sign that USB device is not recognized. In my case there was no reaction (on multiple computers) - like nothing is plugged in... Will see what repairer says... I'll post an update as soon as I'll hear from them.
got my HD2 from repair centre
I've got my HD2 back from repair centre... and it works fine... most bizzar part is paper say that nothing was done...
a friend of me hat this problem some time ago. it disappeared after about 1 or 2 weeks iirc.
Same problem for me, but i've changed 5 diferent rom's and nothing...i will try the airdryer now
my hd2 is not switching on i tried even with different battery but it is not showing display or switching on, but when i connect it to usb it starts vibrate untill i remove its battery. my pc detects it as HTC hd2 nd installs driver. i gave it to a shop but they didnt find any solution. please help me thanks in advance!!
I think you've flashed a .51 radio and you have a TMoUS phone. There's nothing you can do other than look for somebody who knows how to solder and JTAG the phone.
Make sure you read next time.
Hello everybody! It's samanen here, a newbie on xda. NOOOB
For first I'd like to apologize my not-so-good english, I'm 15 and from Finland so please keep the point in the problems and forget my english difficulties
Ok, splutting off and let's move to the point here
So I bought my HD2 (used) about two weeks ago, and right away tried to put WP7/android on it and sync music, contacts, videos and other stuff - but my USB connection didn't, and still doesn't work.
Ofcourse I tried reconnecting, cleaning the usb cable and port on the phone, tried another PCs and total of 10 different USB ports, another cable, Mac OS, Win7, WinXP, SyncMate, WMDC, ActiveSync, removing the battery, resetting the phone, removing SD-Card and SIM-Card, ActiveSync, Hard Disk and Faster data sync options, etc etc with no positive result. Its no fun having a mobile device with no access to put media and other stuff on it :/
Specs and facts:
HTC HD2 (aka Leo), non-T-Mobile (EU version?)
Software info:
Os Version : 5.2.21913 (21913.5.0.94)
Manila version : 2.5.20181527.0
ROM version : 3.14.405.2 (04666) WWE
ROM date : 09/29/10
Radio version : 2.15.50.14
Protocol version : 15.42.50.11U
Hardware info:
CPU : QUALCOMM(R) 8250B
Speed : 1024 Mhz
RAM size : 448MB
Flash memory size : 512MB
Enough numbers?
I think I have tried all the stuff I found here... Still no result, can't be detected on my PC. When I connect my phone to my PC, a notification pops up saying that USB device couldn't be detected/recognized, and it may be damaged. 1 second after it popped up it disappears and if I check the devices connected to the pc, there's no undetected devices anymore.. If I'm quick enough to click on the notification, it shows me what devices are connected and their situations, and I can see an undetected USB device there, but if I refresh (reopen) the window it disappears..
Also, if I use the option "When phone is on, do not charge the battery when connected to a PC." and connect to a PC via USB, it STILL does charge the battery. So my hypothesis is that the phone believes it's on a charger/car kit because its not getting recognized as a USB hard disk/device on my PC and still charges as it's connected to PC. Could this be possible in any way?
Also, when I got the phone and put it on the charger, CoPilot popped up every second (I closed it, it opened, etc) and I had to uncheck some option "When connected to a car kit open CoPilot automatically", so another thing there which refers to my phone being a psycho and believing its being on a charger.
I know there are people with this problem, and topics on this forum, but I think my problem is a bit different from theirs and nobody has really got an answer for this..
Then to my second problem. I can't enter Bootloader mode, or Hard Reset mode.
When I hold down the volDown button and press the bootup button, my phone either normally boots up or doesn't even boot up or show signs of booting into bootloader.
Once I got into the bootloader after dozens of tries, but as I'm stupid, I didn't write down the numbers shown there.. And now I seem not to be able to enter bootloader even after 20 tries.. Hardreset neither works. Same plan - either normally boots up or doesn't do anything. Weirdo much? Can anyone help? :/ I think I've bought an useless device..
Thanks,
samanen
Hi man! Try to flash your phone from SD card with stock ROM. Hope you will get good result! Let me know what happens!
Maybe it is your usb cable. I also can not sync with the cable that was delivered with the official carkit. It is just possible to load the device with that cable.
Your bootloader problem could be caused by broken volume buttons. I think they often get destroyed when replacing a broken touch screen. Do they work without problems inside the os?
Sent from my HTC HD2
Sawyer1103 said:
Hi man! Try to flash your phone from SD card with stock ROM. Hope you will get good result! Let me know what happens!
Click to expand...
Click to collapse
Hai there! Thanks for your suggestion! What rom version would you recommend? I'm such a noob with these roms etc so I'd appreciate much if you/somebody could tell me what to use I will try that as soon as I find my microSD->SD adapter (Im afraid it got into vacuum cleaner as I cleaned my room ), also I have no idea how that's done but I believe there's a tutorial on xda.
rauschkugl said:
Maybe it is your usb cable. I also can not sync with the cable that was delivered with the official carkit. It is just possible to load the device with that cable.
Your bootloader problem could be caused by broken volume buttons. I think they often get destroyed when replacing a broken touch screen. Do they work without problems inside the os?
Sent from my HTC HD2
Click to expand...
Click to collapse
I have tried 2 different cables, one from the package the previous owner provided me and another one from my dad's N97 mini. Could I be so unlucky that those cables are ones that don't work with HD2? I hope I am If you think its about the cable, what cable would you suggest me to get? Just a basic microusb cable from the electonic store? Also the previous owner told me he wiped out all the data and synced the phone before sending it to me WITH the cable provided, so.. Idk Strange.
No, my volume buttons are working great inside the os, I can adjust vol down and up well without any problems. Also my volbuttons are not sticky or feel like broken so I just don't believe that theyre damaged. Also the screen has never got damaged or repaired.
Another problem - Isn't it required to enter bootloader mode when updating the rom? :/
Thanks for both of you for your replies and suggestions, I will keep you updated if anything helps or gets clarified!
-samanen
Sorry then i can not help you. I do not think it is the cable. I bought one on amazon. It is official htc charging and syncing cable. This just came to my mind because you said that your copilot starts if you plug your phone in....
If you want to install another winmo rom you can do it when connected via active sync and it will automatically go to bootloader. If you want to install hspl for custom roms or android you have to go to bootloader for the installation.
Sent from my HTC HD2
rauschkugl said:
If you want to install another winmo rom you can do it when connected via active sync and it will automatically go to bootloader. If you want to install hspl for custom roms or android you have to go to bootloader for the installation.
Click to expand...
Click to collapse
Connected via ActiveSync :/ But the problem is I can't connect my phone.. (bluethoot neither works -__-)
By your info i can say that you have European Model phone. You must firstly check volume buttons, after. Download official ROM by IMEI of you one. As i know sometimes problem in usb connector in phone. I repair some HD2's by replasing usb connector. I living near you) In little poor Belarus))) try this steps and let me know.
Also. If u want i can help you in repair process. Its very simple) i have a big experience with hd2's and iPhones) and other ones. Because i think you boughta bad repaired phone with bad volume buttons and usb connector
Sawyer1103 said:
Also. If u want i can help you in repair process. Its very simple) i have a big experience with hd2's and iPhones) and other ones. Because i think you boughta bad repaired phone with bad volume buttons and usb connector
Click to expand...
Click to collapse
Man, do you think they could fix this in warranty/quaranty? I have still warranty left on this one and i think I could get a new one/HD7 in return
Yeah. They must fix it if you dont damaged phone mechanically(maybe previous owner replaced screen) or you dont flash hspl magld android Leo is still The King i think. Here more opportunities than in HD7 On eBay HD7 cheaper than HD2 because WP7 os not good than android let me know whats up!
Sawyer1103 said:
Yeah. They must fix it if you dont damaged phone mechanically(maybe previous owner replaced screen) or you dont flash hspl magld android Leo is still The King i think. Here more opportunities than in HD7 On eBay HD7 cheaper than HD2 because WP7 os not good than android let me know whats up!
Click to expand...
Click to collapse
No, I've never dropped it or anything and when it came from the previous owner the usb didnt work, and he has never replaced anything on this model (his previous model was replaced to this, completely new one because his previous model stopped working with no reason).
Maybe I should contact the warranty Thanks for the answers, let's see what they can do!
samanen said:
No, I've never dropped it or anything and when it came from the previous owner the usb didnt work, and he has never replaced anything on this model (his previous model was replaced to this, completely new one because his previous model stopped working with no reason).
Maybe I should contact the warranty Thanks for the answers, let's see what they can do!
Click to expand...
Click to collapse
I think all will be good. By what price you bought this one?) Do you want to install android after warranty center?
Sawyer1103 said:
I think all will be good. By what price you bought this one?) Do you want to install android after warranty center?
Click to expand...
Click to collapse
I changed my old iPhone 3G 16Gb white, in terrible condition to this HD2 and paid 100€ Yeah android or WP7 would be soo super cool, the customizability is the thing why I chose HD2! It's amazing how there are still developers developing new stuff for HD2, I highly aprreciate their work
Waiting for their reply from the warranty center!
Let me know. Whats going on! And i will help you to install all)
Sawyer1103 said:
Let me know. Whats going on! And i will help you to install all)
Click to expand...
Click to collapse
Still no reply, wow. Today I got a message that my phone will be back in two weeks. Slow service.
They also told me, that as the usb is LOOSE when you plug the cable in, it may be my fault. wow. So they're not repairing it for free i quess..
My phone is back..
Ok, got my phone back. The mohterboard has been damaged, they told me it had got wet. That's something what's not under warranty, so they're not repairing it for free. The repair would cost almost 500€ so it's totally not worth it. The report says: USB-Connectiong is loose (from other components), also injury with water in screen and motherboard.
Seems that the last owner already knew it's damaged and sold me a damaged one, as he told me it's working 100%.
So, I don't have a clue what to do next. I think I should try repairing it myself but is it worth it? Or worth trying? Where can i get the parts and tutorials how to do this? I think i gotta only repair the usb thingy but i'm not sure - I'd love to get some help now. Thanks in advance.
-samanen
htc hds usb problems (using Android 2.3.4 CyanogenMod)
Hello guy's / lady's,
i need some help aswell. hope im at the good page for this.
i have a phone htc hd2 for a year now. i have put alot of android versions on it and with no problems at all. for this site Xda- developers. ( thnx guy's)
but on the last 1 that i have now i can't us my usb port anymore. other hand my battery is loading with the cable but the pc doesent see my phone ,
i habe boot load my phone to with volume button down and pressing off button and if i try to use the usb cable to connect to the phone i don't see and usb text comming up.
hope youguys can help me with this problem. want to update this version of android.
greetings Dolle
dollegek said:
Hello guy's / lady's,
i need some help aswell. hope im at the good page for this.
i have a phone htc hd2 for a year now. i have put alot of android versions on it and with no problems at all. for this site Xda- developers. ( thnx guy's)
but on the last 1 that i have now i can't us my usb port anymore. other hand my battery is loading with the cable but the pc doesent see my phone ,
i habe boot load my phone to with volume button down and pressing off button and if i try to use the usb cable to connect to the phone i don't see and usb text comming up.
hope youguys can help me with this problem. want to update this version of android.
greetings Dolle
Click to expand...
Click to collapse
I had the exact same problem and it seemed that my cable was loose. You can try repairing it by yourself (it's not under warranty) or trying different pc/cable.
Try this : go to your pc and remove USB driver from application control panel,and after reconnect hd2.
Probably us not a cable problem, but drivers problems.
Bye.
Sent from my HTC HD2 using XDA App
i have the same problem i can't go to bootloadr.
can any one help me How i can fix my hd2? plz
it's the screen stop on white HTC