I am having touble flashing a rom (Touch-IT_v6.1.4_Clean_UC) to my WING. I was able to flash the latest rom from TMO to the Wing.
Do I need to cid unlock? If So how or where?
What am I doing wrong?
by the way I am very Noob at this... and have searched xda and google for how to cid unlock.
Thanks for any help.
xchrode said:
I am having touble flashing a rom (Touch-IT_v6.1.4_Clean_UC) to my WING. I was able to flash the latest rom from TMO to the Wing.
Do I need to cid unlock? If So how or where?
What am I doing wrong?
by the way I am very Noob at this... and have searched xda and google for how to cid unlock.
Thanks for any help.
Click to expand...
Click to collapse
You have to HardSPL your device before flashing any custom rom. Please read the following thread so you don't brick your device
http://forum.xda-developers.com/showthread.php?t=327046
NICE SAVE!!!!!!
anywhoo...
search better next time.
I have searched and seen this page, and these are the directions I followed, and every time I try to flash it says
"ERROR [270] : UPDATE ERROR"
The image file is corrupted. Please check your Update Utility.
I have tried this with...
Touch-IT_v6.1.4_Clean_UC
Touch-IT_v6.1.3_Clean
Open_Touch_v6_Diamond_TLTF3D
ITsPapa_Wing_RC5_3
and tried it one more time after you posted this responce
so what do I do?
go here and follow exactly all the steps:
http://forum.xda-developers.com/showthread.php?t=358225
thanks for pointing me in the right direction, that last one worked.
Related
I need help guys, I've tried searching but i cant find the solution, I have run uspl a few weeks ago and have been experimenting with some different roms and yesterday I installed a new rom, WM6_WWE 3.7+ RADIO 2.94.90+BigStorage (found here http://forum.xda-developers.com/showthread.php?t=318835&highlight=big+storage) and now cannot re flash my device. It does enter bootloader then the progress bar goes to 3% and I get the message ERROR [270] UPDATE ERROR
This has never happened to me before. Can anyone help?
Many thanks
guerilladev said:
I need help guys, I've tried searching but i cant find the solution, I have run uspl a few weeks ago and have been experimenting with some different roms and yesterday I installed a new rom, WM6_WWE 3.7+ RADIO 2.94.90+BigStorage (found here http://forum.xda-developers.com/showthread.php?t=318835&highlight=big+storage) and now cannot re flash my device. It does enter bootloader then the progress bar goes to 3% and I get the message ERROR [270] UPDATE ERROR
This has never happened to me before. Can anyone help?
Many thanks
Click to expand...
Click to collapse
Re-flash USPL and try again.
Panic over, thanks very much Shand359!! Its working just fine now. I guess the SPL was too high eh? I did try to reflash with uspl at first but it seems the copy that I had on my pc was corrupt, i downloaded it and its flashing a new B&B3.7 right now. Thanks again!
Glad you got it going.
XDA ORBIT
Hi guys,
I have trouble with my orbit.
It is german and i want to change it to English,
i suppose i have to flash it before using the new english rom..
I do not know anything about this things..
Please help. Thank you...
02AN
Check out this thread below...
This will unlock your orbit, then you can install any rom....
Sure the english rom is on here somewhere
http://forum.xda-developers.com/showthread.php?t=311403
G
baboon99 said:
02AN
Check out this thread below...
This will unlock your orbit, then you can install any rom....
Sure the english rom is on here somewhere
http://forum.xda-developers.com/showthread.php?t=311403
G
Click to expand...
Click to collapse
First of all, thanks..
I did, and it said updated. I thought it is done..
And i will try to load english rom..
But i scared to do this action because i do not wanna lose my device.
I suppose i have to use it on german language...
would like to download Cingular_RUU_1.8.11.1.WWE.ship.exe for 8125 device
thanks you very much.
WIKI IS YOUR FRIEND...and stickied for a reason
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
the link is not working. thanks.
My bad. I looked at the HTC site and they have 2.25. I also looked at an HTC forum, and their link is dead too. Hopefully someone can renew the link for you.
To make up for being a smart ass earlier::
http://rapidshare.com/files/23672884/RUU_Wizard_1081101_10811103_10910_Cingular_WWE_Ship.zip
I searched the wizard forum and found the link in another thread.
You are awesome. I was looking but I guest I searched a wrong keyword.
thank you very much.
what i am trying to do is to unlock cid and sim of 8125 /ipl2.25 and sqp 2.25. according some threads. they said that i have to downgrade to 1.8 rom and use lockwizd to unlock cid and sim. The 1.05 rom does not work. it goes 98% and it stops. thanks once again.
READ, Read, read before doing any unlocking/customizing. There are wiki's and stickies here that will help you to understand the how's and why's so that you don't end up bricking your device. Dr. P has an excellent tut about unlocking. It is stickied. As for searching, often, if you put down specifically what you need, it will come up. That's what I did. I entered the entire rom you wanted, and bam, the magic genie gave me the link.
I change the rom and Advantage it´s broken!!!!!!!!!!!!!!!!!!!!
The error is ERROR 244 INVALID ID
i have flashed my unlocked athena x7500 with rom 6.1 by irius. the update breaks at 98%.
now i have only pixels on screen, and nothing happens.
in the Bootloadr following:
\
IPL-v1.00
\
SPL-v1.20 Olipro
Help... help... help...
Explain a little more by 'changing ROM'!
I was entering a rom and I was blocking the Athena by making a reset everything returned to normal but I can not enter another rom because I get this error.
As we enter the ATHENA in Bootloader I get:
, @
IPL-V1.00
, @ MFG
SPL-3.50.OliNex
Missing data?
What ROM are you coming from? What ROM did you attempt to install? How are you trying to install it?
I'm still a little confused by 'blocking the Athena by making a reset'
If you are attempting to reflash your device to a different ROM, make sure you follow the instructions posted around the site.
Are you downgrading? Using cmonex downgrader....... I hope I can help but I need a little more information from you on whats going on.
Or maybe someone else can chime in if they get it!!!!
Montecristo said:
I change the rom and Advantage it´s broken!!!!!!!!!!!!!!!!!!!!
The error is ERROR 244 INVALID ID
Help... help... help...
Click to expand...
Click to collapse
cmonex has a automated fix for that, i think its under upgrading fourm
Irus, just to take advantage of this learning opp. What did Montecristo do to the device (or try)? What happen to it?
Kenjari said:
What ROM are you coming from? What ROM did you attempt to install? How are you trying to install it?
I'm still a little confused by 'blocking the Athena by making a reset'
If you are attempting to reflash your device to a different ROM, make sure you follow the instructions posted around the site.
Are you downgrading? Using cmonex downgrader....... I hope I can help but I need a little more information from you on whats going on.
Or maybe someone else can chime in if they get it!!!!
Click to expand...
Click to collapse
I had installed the rom iRUs, then installed the new rom taxist and 98% were blocking ...
Try to re install and continues to bug me.
Please, my English is not very good ... some help ...
I made the downgrade but I continue to get the same error!
You used the wrong SPL Version
Montecristo said:
I made the downgrade but I continue to get the same error!
Click to expand...
Click to collapse
It seems that you did not read taxists instructions that it is for SPL 3.5 only
Why don't you try flashing AP3
Edit:
sorry bit of confusion with what you have done.
Were you on SPL 3.5 originally?
Did you use Cmonexs downgrade file after the failed Taxist flash?
If you did then trying AP3 for SPL 1.XX should work.
lakeman said:
It seems that you did not read taxists instructions that it is for SPL 3.5 only
Why don't you try flashing AP3
Edit:
sorry bit of confusion with what you have done.
Were you on SPL 3.5 originally?
Did you use Cmonexs downgrade file after the failed Taxist flash?
If you did then trying AP3 for SPL 1.XX should work.
Click to expand...
Click to collapse
I had the spl 3.5 when installing this ROM.
Already concerned with all rom and tell me the same problem.
same prob >> http://forum.xda-developers.com/showthread.php?t=405496
but with spl 1.2
maybe this helps http://www.xxacsxx.wg.am/ameorepair.html << but its german
xacsx said:
same prob >> http://forum.xda-developers.com/showthread.php?t=405496
but with spl 1.2
maybe this helps http://www.xxacsxx.wg.am/ameorepair.html << but its german
Click to expand...
Click to collapse
Exactly .. this is ... We saw your resolve?
IT WORKS!!!!
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4 <<< see here
my ameo lives again YEEEEEEEEEEEEEHHHAAAAAAAAAAAAAA
ok, i'll probably make a new thread and sticky that. about modelid (and wifi) restoring
but yeah until then everyone use that link,
http://forum.xda-developers.com/showthread.php?t=387454 here mainly 33rd post.
if you already managed to screw the modelid, the downgrader won't help, because it only reads the current information (of modelid and wifi) and transfers it to the right place when downgrading.
but the above link always helps. you just need a mac address to enter in the program.
cmonex said:
ok, i'll probably make a new thread and sticky that. about modelid (and wifi) restoring
but yeah until then everyone use that link,
http://forum.xda-developers.com/showthread.php?t=387454 here mainly 33rd post.
if you already managed to screw the modelid, the downgrader won't help, because it only reads the current information (of modelid and wifi) and transfers it to the right place when downgrading.
but the above link always helps. you just need a mac address to enter in the program.
Click to expand...
Click to collapse
YES!!!!!!!!!!!! YEAH!!!!!!!!!!! SI!!!!!!!!!!!!! SI !!!!!!!!!!!! MASTER!!!!!!!!!!!! GENIUS!!!!!!!!!!!! MAESTRO!!!!!!!!!!!! GENIO!!!!!!!!!!!!!!!!!!
Thanks!!!!!!!!!!!
Now'm going to donate some money for what they've done !!!!!!!!!! Thank you
Thansk!!!!!!!!!!!!!!! Xascx.
I´m very happy!!!!!!!!!!!
Sticky done, thanks CMONEX!
sergiopi said:
Sticky done, thanks CMONEX!
Click to expand...
Click to collapse
ahh I didn't notice you are a moderator thanks for stickying this.
mac number?????
hello all !
i have the same problem but with the 1.20 spl
please where i can find my athena "mac number"
what i have to do ?
please help me and sorry for my english
meybaland said:
hello all !
i have the same problem but with the 1.20 spl
please where i can find my athena "mac number"
what i have to do ?
please help me and sorry for my english
Click to expand...
Click to collapse
If you use router, the number is there....
Few questions:
How do you mess up the modeID and wifi anyway? Is it flashing to many ROMs? Does this automatically happen with the upgrade to spl 3.5? How does this happen?
Second, I have ran across my the mac address....but I'm having a blank....where can you find that at?
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
nauman said:
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
Click to expand...
Click to collapse
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
farukb said:
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
Click to expand...
Click to collapse
I have the original ship ROM "P800w_SEA_ENG_WM6_Upgrade_20070713", even that fails with the same error message.
My device is already unlocked using the artemis uspl and I have used several ROMs earlier!!!!
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
corepda said:
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
Click to expand...
Click to collapse
I sent my device to HTC service center and go it resolved. That is the only thing which worked for me after a couple of weeks searching in the forums and no solution. But the HTC SC buggers replaced my device entirely and gave me back an old **** device . So also keep this in mind. you won't be sure, if you get your original device back after the so called repair. HTC SC in India is super *****y, had a bitter experience!
Now I have moved to TD2, know that I was at loss, but am happy to have a shiny new TD2
Service Centre at Mumbai Sucks Big Tym....
HTC service centre at mumbai sucks big time....
they said they can't replair my cell n it has a HARDWARE ISSUE!!!
stupid lasses....
What can we do here getting the same error....
Tried MMC method, nothing!
HOW CAN THERE BE NO SOLUTION TO THIS PROBLEM??????????
no have solution this problem ???
stupid ! CID area !!! STUPID HTC ---
Dears,
Any one can help me to find a way or a tool to get rid of CID lock,
I can't flash my old ROM to a new one, So please any help or hint?
Thanks in advance
You mean not SIM, but ROM unlock right? If so in ROM section there is a HSPL procedure which will do the trick
Thanks
Thanks mirost1 for your fast response,
Yes it's ROM problem, because when i want to update my old ROM with a new one from the official site of HTC I got this message on my phone when I did the flashing procedure:
Error [294]: invalid vendor ID,
This update utility cannot be used for your PDA phone please check your update utility
So you think that the HSPL is the only way to get out from this trouble.
Best regards.
Yes, its the only way. When HTC give their phones to service providers, they modify the ROM and lock it, thats why you cant put official HTC rom on this device. When you HSPL the phone you can put whatever ROM you want on it.
Hi
Thanks for your useful information and help
No probs mate