Database Users

Change snooze time for reminders

Is it possible to customize the snooze time for the reminders?
I get Snooze 5 minutes, 15 minutes, 1 hour, 1 day.
I'd like it to be 5 minutes, 1 hour, 4 hours, 1 day.
How can I change it?
TIA

I would also like to know if anyone has a solution to edit this in registry or any other way. My Dutch Rom has Snooze 15 Minutes twice instead of 1x 10mins and 1x 15 mins . I would like to edit this also.

I bet that means there must be a registry setting somewhere to change this, since in your ROM you have a duplicated snooze time...

I have looked here and on google for over an hour. I cannot find anywhere to change the snooze interval times. If you are an expert user or ROM cooker could you please at least post here why you were not able change the snooze times. In theory it seems simple and that's why it's so frustrating to not find a response anywhere of how to do it. You would think that there would be a little place in the registry somehwhere where you could just change a few numbers and there you have it. Is it embedded it the calandar program or something?
Just put our mines at rest and tell us why it cannot be done so we stop thinking that there must be a simple solution somewhere.
Or be a hero to us all and find a fix!
Thanks!

registry keys

Hi Everyone:
A small clarification is needed. My device is defaulting to Moscow GMT+3 everytime I restart it. I want to know actually 3 things if possible:
1- What's the registry key that allows you to select the regional settings?
2- How can I know the table code of countries like Moscow is 0x00FFXXX, etc... for the various time zones.
3- I noticed sometimes that whatever registry keys in HKEY_LOCAL_MACHINE -> nls, they are changed everytime the system restarts. I was assuming that nls\overrides is doing that but I altered everyting and yet after restart new values appear in nls keys and even in overrides. Is there any other place in registry that writes values on top of nls upon restart?
appreciate the help,
Cheers

I have a similar problem where the backlight timeout setting (on battery power) resets to 10 seconds everytime I turn my MDA off. Really annoying.
I've tried changing the setting in the registry directly as well, but it still changes back.
Any ideas?
Thanks,
Scott

It is strange that something keeps changing the reg settings.
I had the 10 second thing on my Jamin and it seem to have something to do with the screen lock plugin.
Never did solve it.
Locale settings are in HKLM\nls DefaultLCID (dword) and you can find all possible values here.
But the time zone is set in HKLM\Time\TimeZoneInformation and its a bit complicated (its a whole data structure and not just a value)
I think you need to check your startup programs (HKLM\init and windows\startup).

levenum said:
It is strange that something keeps changing the reg settings.
I had the 10 second thing on my Jamin and it seem to have something to do with the screen lock plugin.
Never did solve it.
Locale settings are in HKLM\nls DefaultLCID (dword) and you can find all possible values here.
But the time zone is set in HKLM\Time\TimeZoneInformation and its a bit complicated (its a whole data structure and not just a value)
I think you need to check your startup programs (HKLM\init and windows\startup).
Click to expand...
Click to collapse
Thank you for your reply and for the great link. I am starting to feel that this problem is related to HTC Home. Appreciate if anyone can comment on this issue.
Requesting Moderators / Admin to move this post to the appropriate board

I've been playing with the new PDAMobiz ROM and discovered that in Settings->Phone there is an option to sync time with the cellular network.
Unfortunately this will also force your time zone in to what ever the network is set to which at least in my case is incorrect because the network operator did not want to bother with DLS settings.
Perhaps you have this setting on as well?

problem with UltimateLauncher with more than 2 todayplugins

I'm testing this nice app but I've got several problems after the first setup.
If i insert in the varius tab more than 2 today plugins like Pockerweaver and Pocket Digital Clock in one tab and Todayagenda in other one, every time i enter into the program setup for adding or modifing something and i confirm the modification, my device hang. I need to softreset.
Does someone else have the same problem?
I've got I tyTn (I've tested with both WM 6.0 and 6.1)

lightman3dd said:
I'm testing this nice app but I've got several problems after the first setup.
If i insert in the varius tab more than 2 today plugins like Pockerweaver and Pocket Digital Clock in one tab and Todayagenda in other one, every time i enter into the program setup for adding or modifing something and i confirm the modification, my device hang. I need to softreset.
Does someone else have the same problem?
I've got I tyTn (I've tested with both WM 6.0 and 6.1)
Click to expand...
Click to collapse
I've experienced that sometimes during set up...It happened somewhat randomly, but not so much to prevent me from doing what I needed to set up. Also, it doesn't do it now that everythig is set. You might try:
1. make sure all your plugins are not enabled in the normal Today set up before you try to add them into a tab or sub tab.
2. properly set the "Activate plugin on startup" and "Save memory" checkboxes. I generally have the first only checked on the "main" tab items and unchecked on all other tabs. Also, I generally have the "Save mem" unchecked for the main, and checked for the others.
I can't say this will stop it from happening, but i did expereicnce different results when I played with them some...

jomo25 said:
I've experienced that sometimes during set up...It happened somewhat randomly, but not so much to prevent me from doing what I needed to set up. Also, it doesn't do it now that everythig is set. You might try:
1. make sure all your plugins are not enabled in the normal Today set up before you try to add them into a tab or sub tab.
2. properly set the "Activate plugin on startup" and "Save memory" checkboxes. I generally have the first only checked on the "main" tab items and unchecked on all other tabs. Also, I generally have the "Save mem" unchecked for the main, and checked for the others.
I can't say this will stop it from happening, but i did expereicnce different results when I played with them some...
Click to expand...
Click to collapse
Thanks a lot for the answer...I've followed you tricks...but in my case the problem appears in a systematic way :-((((

I love UL but its still a tiny bit buggy. It just doesn't seem to like certain today plugins. I don't have a rhyme or reason for it, but sometimes it doesn't play nice.

PocketWeaver?
Could it be PocketWeaver? I've used UL for several months now with MANY today plugins. Currently I am using it with both PocketDigitalClock and TodayAgenda. Since PocketWeaver is the only one I haven't tried could that be what UL is not behaving well with?
At one time I had 5 plugins running in 3 tabs and UL setup has never hung for me.

lightman3dd said:
I'm testing this nice app but I've got several problems after the first setup.
If i insert in the varius tab more than 2 today plugins like Pockerweaver and Pocket Digital Clock in one tab and Todayagenda in other one, every time i enter into the program setup for adding or modifing something and i confirm the modification, my device hang. I need to softreset.
Does someone else have the same problem?
I've got I tyTn (I've tested with both WM 6.0 and 6.1)
Click to expand...
Click to collapse
How long did you wait before a soft reset. On my device I have to wait quite a bit for the screen to refresh after any configuration changes. I have 4 tabs with 7 plugins going right now and it does not hang.

I noticed I couldn't get the Audio Manager plugin to work properly in UL, wouldn't expand on selection.

I have phone weaver running without issue. Phone Alarm was giving me problems and very infrequently batterystatus

rifraf1 said:
How long did you wait before a soft reset. On my device I have to wait quite a bit for the screen to refresh after any configuration changes. I have 4 tabs with 7 plugins going right now and it does not hang.
Click to expand...
Click to collapse
I wait several minutes...and it hangs also doing a simple INI refresh...

lightman3dd said:
I wait several minutes...and it hangs also doing a simple INI refresh...
Click to expand...
Click to collapse
UPDATE: i think to have found the reson why...I've set all the ico dimension to a "correct" dimension, like for an ICO with maximum of 48px i've set 48px and not 52 or something more and for an ico of 68 i've set 68 not more or less...and all is working weel now. I can do ini refresh and modify the settings without any phone hang.

I figured I try out UltimateLaunch and I made a new tab and added BatteryStatus today plugin. It locked up, after soft reset it locks up within a few seconds. Any ideas how I can fix this without a hard reset? Thanks
Chris
EDIT: I was able to get to the Today screen and disable UltimateLaunch after about 20 tries and some caffeine! I disabled battery status in the today screen this time and turned of the minimize in Ultimate Launch. This fixed my issues. Thanks anyway.
Chris

Sorry a newbie question. How do I actually put in more than 1 today plugin into the home tab of UL? Does the software allow that? I would like the whole today screen to rotate n not only part of it.
Thanks in advance for the reply.

[email protected] said:
Sorry a newbie question. How do I actually put in more than 1 today plugin into the home tab of UL? Does the software allow that? I would like the whole today screen to rotate n not only part of it.
Thanks in advance for the reply.
Click to expand...
Click to collapse
Adjust the height and add a 2nd plugin, just like you did with the 1st.

[email protected] said:
Sorry a newbie question. How do I actually put in more than 1 today plugin into the home tab of UL? Does the software allow that? I would like the whole today screen to rotate n not only part of it.
Thanks in advance for the reply.
Click to expand...
Click to collapse
If you want to have more than one today plugin on the same tab (i.e., HTC Home with another plugin underneath it) be sure to "combine" the tab.
FYI, the perfect fixed height for UL, with the system tray still visible, is 245 pixels.

Thanks very much for all your help. I got it.

Maybe you Gurus can help me....
I wish to have MyFaves as a UL plug-in but it will not show up unless I have it checked in the Today screen items, then it shows up twice (once in UL & once on my Today screen). Can anyone help me? BTW I have a cooked ROM & am using DuPrade's MyFaves cab file.

dzelaya18 said:
FYI, the perfect fixed height for UL, with the system tray still visible, is 245 pixels.
Click to expand...
Click to collapse
...267 if you don't have the system tray.
I too experienced some lockup issues using Battery Status. I have since unloaded it and no lockups since. I'm thinking it's anything actively monitoring the system that UL doesn't like. Although i have RLToday installed and using it for my msgs notifications, but that is a registry read.

Can I keep a program going while turned "off"?

This may be more of a question specific to WM 6.1 than the Treo Pro itself. I really enjoy using a program that acts as a client to control and listen to my police scanner called Win500. (Main reason for buying Treo Pro with WM). It's a program that uses a custon TCP port via either wifi or evdo. My problem/goal is... I want to turn off the backlight and keep this app running.
I have played with what I think are all my options. Telling the device to turn off backlight after 30 seconds only dims the backlight but it does stay on. I am looking for one of two fixes. Either to be able to keep this program running and passing the audio to the speaker after hitting the top 'off' button. Or somehow have the backlight completely shut off after 30 seconds. Ideally it would be the first option so I could lock the key pad/touchscreen and have the clock screensaver. Possible Registry hack? Could a I make shortcuts with options specific to this program? I see you can turn the backlight all the way off in the settings.. I am a new with WM. So don't know if any of this is possible?

You should search for a registry hack to keep WiFi turned on while the device is in standby. If I'm correct this setting is available in Diamond Tweak, and HD Tweak...
The description for this tweak is: "Keeps WLAN online/connected in standby mode."
The values on the HTC Diamond used are:
1.
Code:
HKLM\System\CurrentControlSet\Control\Power\State\Suspend\{98C5250D-C29A-4985-AE5F-AFE5367E5006}\Default
2.
Code:
HKLM\System\CurrentControlSet\Control\Power\State\Resuming\{98C5250D-C29A-4985-AE5F-AFE5367E5006}\Default
3.
Code:
HKLM\System\CurrentControlSet\Control\Power\State\Unattended\{98C5250D-C29A-4985-AE5F-AFE5367E5006}\Default
I checked this on my Treo Pro. The values are the same.
So just download Diamond Tweak and apply the tweak on your TP.
Don't mess around with other tweaks! Mind that the application is not written for the TP. There are a lot of tweaks that should work since it's both WM6.1. But better safe than sorry Backup your device before applying any tweaks!

Okay thanks I will try that. I do want more than just to keep the wifi running. Also, will need to keep the program running and have it pass audio to the speaker. Plus I use the evdo data more than the wifi. But I will give it a shot.

Use this - works great. I have it set to my HOLD side button.

Here is the Readme for it.

davidck65 said:
Use this - works great. I have it set to my HOLD side button.
Click to expand...
Click to collapse
Thanks a bunch! exactly what I was looking for.
Finally got to try the program and it does work great

device auto lock and off when i want use Garmin

hi all
i want to use garmin for 30 min or much but after 1 min my device lights goes off and then display off and lock what can i do for disable auto device lock and auto off after 1 min
BR

weird, i don't have that problem.. try configuring your GMXT, go to settings --> display --> backlight override and check all boxes..
p/s: if u wanna enable auto rotate so that u could view the maps in widescreen mode, add these codes to your registry..
for hkcu\software\htc\htcsensor\gsensor\modulename, add registry value "Garmin Mobile XT" = "\Garmin\Que.exe"
for hkcu\software\htc\htcsensor\gsensor\WhiteList, add registry value "Garmin Mobile XT" = "QUE_SUBAPP_WND_CLASS"

Garmin in landscape
Hi, thanks for the tip!
I always wanted to see GMXT in landscape, but didn't know how to do it.
I have copy/pasted values to the suggested locations, but nothing happened.
The registry values I have created are string values. Should I try with e.g. dword, or something else?
TNX

hi man i check all boxe in setting -> display -> backlight but after one minute my device goes to lock stat and after that my display goes off .
i want registry address for time of suspend mode for device to lock and change it to example 20 min
BR

Maybe you should check only the first one that says "always on".

CRO_Misho said:
Hi, thanks for the tip!
I always wanted to see GMXT in landscape, but didn't know how to do it.
I have copy/pasted values to the suggested locations, but nothing happened.
The registry values I have created are string values. Should I try with e.g. dword, or something else?
TNX
Click to expand...
Click to collapse
u are right all the way, except that u need to soft reset the phone for it to take effect..

amirjco4 said:
hi man i check all boxe in setting -> display -> backlight but after one minute my device goes to lock stat and after that my display goes off .
i want registry address for time of suspend mode for device to lock and change it to example 20 min
BR
Click to expand...
Click to collapse
have u tried re-installing the GMXT..?

non of your help is useful we need registry value change for that

I'm having the same problem. Garmin worked perfectly for the last 2 months up until last week. now it locks automatically (but you still have to press the unlock button to be able to slide across the tab) and it loses satellite reception for a second. To avoid it I have to, say zoom in or out on the map, every 50 seconds otherwise it locks after it reaches a minute.
Has anyone found a solution or is it just a case of reinstalling it?

Sorry to revive this thread but I also have this problem. "Backlight Override" is checked but still have the lock come on after a minute or so. Really annoying. I also try reinstalling but no help.
Could this have something to do with CHT editor's lockscreen? or BSB tweak's setting? Just a thought. I have been using Android mostly so haven't got time to test out all the setting to see if it will make any difference.

as a work around, can you just change your backlight settings when you need to use garmin?