Related
anyone know how/where to get an xda mini II repaired? i'm in italy, but i can careless where it has to go. I'm at the point where i would rather just sell the device for it's workable parts (if there are any)...Today the screen has done a myraid of interesting things...anywhere from blank to thousands of vertical lines....ugh...
ohh yeah...warranty is void....or is time to just move on?
ok...no answers so i thought i would add some images ...anyone seen this before?
Mate i had a similar **** up a while back ...I did a HR and it worked fine..for me it was caused by a Overclocking software [Dnt want to Name it ]
If this dnt work try the Batt out and back in trick
Call ur Local service Center...
mine looks exactly teh same! but it happened after i tried to replace my housing, i screwed up the little gold prongs where the ribbon connector from the lcd plugs in...****! any ideas on how to fix? im the us so service center isnt really an option, and id ont want to send it off.
hi i had the same problem with my magicians, after i changed the housing. i found the problem with my device was that i had not plugged the screen back in properly. all i did was to ensure that it was pushed in properly before i clipped it back in
Menappi -
I had the exact same issue. I reopened the casing WITHOUT disconnecting any cables. I flipped the screen's ribbon black lock up, while maintaining pressure on the ribbon so that it does not pop out. When the black lock lifted, the preasure of my finger moved the ribbon further in . I pushed the black lock down, reassembled the device and ... PRESTO!! the screen works perfectly... and chumps on the bard advised to buy a new screen!!
Good luck
Hi All,
seems, you have problem somewhere in display connector. However, sometimes I see similar picture on physically broken displays, let's imagine, you were careful ad didn't use a hammer during housing replacement.
There are two possibilities: at first - try to remove and re-insert display cable (I hope, you know. how brown lock works). If there is no success - try again. At second - some wire on flat cable may be damaged. Sometimes, good technician with soldering iron can fix it, sometimes not. And if you used force, removing cable, board connector may be damaged too. However, only the experienced man can find it easily.
So, try to carefuly re-insert display cable. Try several times. If you are unsuccessful, you, for sure, need an experienced technician to fix your device.
I hope, you are not enough mad to send device for repair to Russia
I have been using AT&T 8525 for about 5 months now. Dropped it in office a week back and it was on an uncarpetted surface. No external damage but it powered off. I had to try for a while to power it on but eventually it did power on.
Since this event it just powers off on its own. Right now, even minor jerks cause it to shut down. When you pull the phone out of your pocket after a while, it has already shut down!!! Took it for repair to a local cell phone repair assuming it might have some connector damage but they could not figure out the problem. They opened it, cleaned the interiors (as it had dust build up) and according to them everything appeared normal.
What would you guys recommend? It is running Schaps 4.30. I see that HTC has a repair service in US.....had anyone tried that?
Sounds like battery might be a little bit loose... Jam something in behind the battery to make sure of constant connection... You're not the first with this complaint. The battey terminals may have been bent back just enough to cause this intermittant problem, especially when it gets jolted, the battery disconnects from the teminals causing an automatic shutdown due to no power.. Just thank god you didn't break the terminals off. Sometimes can be fixed but if the break is at board level, you may as well sell it off on ebay for parts because its just about impossible to fix then.
Cheers...
Very smart ultramag!! Your reply made me think what I did after it fell down. At that time I did think that the battery was loose as it was running when on active syn (powered by laptop) but not when I removed the cord. I did turn the terminals a bit and it powered on after few attempts (the drop must have given the circuitry some shock to recover after sometime).
I have jammed a paper on the side of the battery opposite the battery terminal. Will report back in a day or two if it still gives any problems. That should help others with the same problem.
Also this event has taught me that invisible shield (the plastic shield that we stick on) perhaps may not be the best protection. Case is a must to absorb the shock!
ok the problem still continues despite sticking a paper on the battery side (opp the terminal). I do believe that the battery was part of the problem. Before sticking in the paper, it used to give me a Red LED for few seconds when I attempted charging and then turned to amber. Now that problem is not there....it turns to amber right away on plugging in the device.
So part of the problem is addressed but the Hermes still powers down on its own when subject to minimum shock (in your pockets and you are walking around in the office or driving a car). What do you suggest? Should I send it in to HTC? Are they good about addressing repair issues?
... and yet I think it probably is the contacts as suggested above. It may be that it's a little more than just the contacts not pressing firmly on the battery though. There have been cases where a fall has actually broken/cracked the solder joints between the contacts and the board. A trickier thing to fix unless you have some skills in that direction.
Mike
AT&T powers off after drop - HTC's take on the situation
Ok so here is HTC's evaluation of the situation.
They want to change the main board (mother-board I guess). In addition, though the phone is just 4 months old (was purchased refurb from AT&T) and has barely any scratches, they would replace the casing, the keyboard and the structure that holds the keyboard and LCD. And they would ONLY charge me $272. Isn't that ridicuously amazing??
To me it seems they can't figure out what the hell is going on, so lets just go ahead and replace a bunch of things and one of them should be a hit.
I have asked them to send the phone back. Mike, do you think the main-board could be the issue? Any recommendations of who I could try for repair.....or what I should ask the repair guy to look into to find out if the main board is the issue or not?
Only $272??? Good God! That lot would cost you around $450 if it were fixed at HTC UK!!
If the drop caused cracking internally then that may be why they want to replace the rest. if there are known defects that are not repaired, they cannot guarantee the repair and so will not do it at all if you do not agree to the whole thing.
of course, you could be right and they have no clue and simply want to replace everything and hope something gets fixed....
Don't PPCtechs also do repairs on that side of the pond?
Hi, I come on here quite a lot for information as it's an amazing resource! This time however, I'm attempting to give something back!
I experienced the "black screen on slide out" on Monday. Phone completely screwed. I've also had a few droppages and had it apart once before so there's no way warranty is gonna help!
I stripped it down and soon discovered what it is that actually fails on the ribbon. The coating had worn through due to rubbing on something during the slide out / in process. it had been playing up for a while, probably due to shorting out on the metal case, but now the tracks (aluminium?) had worn right down.....
In pic 1 i've circled the worn area. The shiny section is where i'd tried taping over it to prevent shorting, before i realised the tracks were gone.
Got an almost new one off ebay for 15 quid and, realising it was going to happen again, came up with a solution that, so far, looks like it will work....
A while back I bought some "anti rattle felt" for my car's dashboard - really thin and strong self adhesive felt to prevent squeaking joins between dash sections. I cut a piece of this and stuck it to the new ribbon. Once this stuff is on it's well stuck, by the way!
See pic 2 for the modded ribbon cable.
On reassembly everything is working just fine so far! Here's hoping that it lasts longer than 6 months this time!
Just need a new casing now as mine is decidedly second hand!
Hope this turns out to be of use to someone!
cool story bro
when i took apart my xperia to replace the housing this seemed like a really weak point in the device. glad to see someone who has had the problem has been able to fix it
Why does the screen go black?
Hi,
When the coating wears off the ribbon cable it exposes the tracks in it. when you slide the keyboard out the exposed tracks short out on the metal casing and the screen loses it's input signal.
thats whats happened on mine at least and i presume quite a few others?
HTH!
Update:
That's interesting: My phone was also losing signal with the keyboard out, and occasionally while closed up as well. It would just randomly drop to "no signal" for a few seconds.
It hasn't done it since replacing the ribbon cable.....could be coincidental of course.
I'm having the same problem
It just started a week ago and I got the phone in January off of ebay. I'm new to opening up the phone so could anyone help me find the correct tools or have a link to a site with pictured instructions?
I noticed that the sliding mechanism started to go loose about 4-5 months ago but didn't expect the screen not respond in landscape mode. I have yet to see the other symptoms you all are referring to. I would like to fix this before it get worse.
In mine case it went totaly black after one week of this problem... You have all the instruction on youtube, there is where i looked. For tools you can be inovative, but the exactly right ones come with housings from ebay, it is only 15EUR, and i bet you have some cracks so it wouldn't hurt replacing. That is what i did, along with ordering new sliding mechanizm, and new ribbon cable.
I am open for ideas to prevent my ribbon cable from being cut at it weakest point again.
I'm assuming my flex ribbon went bad yesterday, since sliding the keypad out causes my screen to shut off.
Already ordered a cable off ebay and will attempt to replace it myself :O
Replaced my flex ribbon cable with one I bought on eBay. The screen doesn't turn on at all now, which leads me to believe the cable I was sent is defective. Put the old one back in and it works okay, less landscape mode. ughhh what a pain.
great tips! my input is I bought a case off of ebay that was ~60$ and everything actually fit fine for me...so I wouldn't discount every seller but you do get what you pay for, the 15$ cases are probablly the ones that will give you problems
I working in a mobilephone repair center if anyone need help drop me a priv... i able to get 2nd hand or even brand new components
Replaced the flex ribbon cable -
I got my flex ribbon cable a few weeks ago and took it to my local repair shop. They replaced it but the LCD screen/optical joystick receives no power. The touchscreen and everything else on the phone works just fine now. I thought it was a defective item so it was exchanged with a new one.
Got the repair shop to replace it again and the outcome still remains the same as the first.
Theres no light coming from the screen nor the side illumination.
I just told the repair shop to just place the original back in for the mean time.
Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power botton.
Could it be defective a batch that the seller was sending out? or the repair shop's mistake and is playing dumb so they do not have to admint fault?
Hopefully there's an easy fix to this problem.
-Also I did inspect the ribbon before and after the repair. looks new as the OEm
Can anybody help me out with this new problem after replacing the cable -
perhaps you should try a hard reset. Ive had problems in the past where the optical joystick and the illuminators did not work, and that worked for me.
On the other hand, the top illuminators are on the same piece of hardware as the flex cable that was replaced, so a faulty flex cable is possible. The bottom illuminators are on the circuit board that the optical joystick attaches to, separate but connected to the flex cable.
Ive recently replaced my flex cable and touchscreen. The experience i had with the faulty touch screen was that it appeared to receive no power, but was in fact displaying a dark backlit illumination that could only be seen in the dark. At the same time however, the screen did not display anything. I'm not sure if this is similar to your experience, but if so then your touchscreen would need to be replaced.
ive done all repairs on the xperia myself, and one thing ive discovered is if something doesnt work right after a repair, simply disassembling it and reassembling it to make sure all the connections are properly done has worked for me in the past.
"Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power button."
Now when you say the power button, do you mean that a red light appears under it?
I dont know if i can come to a conclusion or that i can help (or have helped) you come to a conclusion, but i can only assure you that the xperia acts out in strange and weird ways.
Good Luck!
Tags
Dismantle / Disassemble Sony Ericson Xperia X1
http://www.ifixit.com/Teardown/Sony-Ericsson-XPERIA-X1/788/1
http://www.formymobile.co.uk/xperiadisassembly.php
http://www.youtube.com/watch?v=AWDurQrRt-Y (REAR)
http://www.youtube.com/watch?v=iyGUbxFqvyc&feature=related (FRONT)
http://www.youtube.com/watch?v=elgC8hwHfYQ&feature=related
For info.
Mike
Thanks for the links. I've tried the hardreset and restoring the original rom but the issue is still there. It's really bugging me that everything works but the LCD screen. I'm currently using MyMobiler to use my phone. The touch screen works fine and so does the soft keys. Just no power for the lights. I might just give up and wait for another phone that catches my eye and then tinker with the xperia myself. but if anyone got a solution or want me to test something then I'll give it a try.
My warranty is no longer affective so I'll use my phone as a tester to help others with any problems.
TRIONDAVE, how's your Xperia running now with the cable mod that you did? Its been 6 months since you created the thread. I hope you're still around.
My Xperia X1 works nearly fine, except for the keyboard issues, so I'm thinking of opening it up. If your Ribbon mod helped I might just do it too once I've got it opened. Mine has a MOUNTain of cracks though, and the battery compartment itself is cracked on both side enough to make the compartment CURVED. Hence the Battery cover doesn't sit well.
I'm looking around for broken Xperias which I might be able to use to change the internal cracked casing. Lets see.
DatDereX1 said:
cool story bro
Click to expand...
Click to collapse
My thoughts exactly.
Hello guys, I am in need of real help over here!
Its just that Ive replaced my ribbon cable, the old one got screwd up.
However I got done for 10 minutes ago, tried to start up the phone.. without success :,(
The ribbon cable doesnt have anything to do with the start up, only the screen am I correct? Cause I cannot even start my phone..
Ive connected the charger, but when I remove the battery it shows a red light, meaning no battery, correct?
So what may the problem be exactly? Maybe the battery is all dead, or?
PLEASE HELP!
for the people with ribbon failures how long have you had the phone before it occurred ? im just interested on the cables lifespan.
mine is fine so far but i have noticed the slider is flimsy and rocks left and right.
Hi all, I was going to sell my HTC touch HD to a mate of mine and due to many scratches on the casing I purchased a new case & chassis. After following a guide on the internet, as I removed the screen I caught a small ribbon cable believed to be the light and pulled it slightly out of the clip. We replaced it and put the phone back together and it looks like we have broken the screen as you turn it on the phone vibrates but we get a small white blob near the end call button. It also appears the phone no longer charges although the amber light appears and you can turn the phone on. I think the phone was working because if you press the buttons the phone vibrates, but now nothing happens. Is my best bet to sell the phone as it is or shall I buy a new screen and attempt another repair? its £38 for a new one and I dont want to waste any more money.
Use a program like MyMobiler to check on your desktop pc that your device is working, and that you are sure the screen is faulty. If you really have broken it then a replacement is your only option.
http://www.mtux.com/
cheers thats a great idea.
Does anyone know about why I may be getting the charging problem? Is it because the ribbon inside the phone might not be earthed 100% as I removed the tape holding it down
Hey guys! I have searched the forums and haven't found a problem quite like this yet. Recently, I got some water on my phone, but was able to wipe it off, and it worked fine, and the water damage indicators on the phone are still white. During that day though, after rebooting the phone, the screen appeared to not turn on, so i thought it WAS water related damage, of course.
I put the phone in rice for a few days, and NOTHING, till one day i looked at the phones screen under intense light.
The phone vibrates after you power it on, but then that's all you get, but upon further inspection under a bright light you can see the MAGLDR boot screen come up, and load all the way to the GO GO GO part, then it freezes and stops.
The screen is still black, and there's no light at all, you have to hold it DIRECTLY under bright light to see it.
I am ..or was...running the android NexusHD2 gingerbread 2.2 NAND (2.3.2) rom with MAGLDR 1.12 installed.
I can get into the boot menu, and all the hard buttons work. I can even play tetris, when i can see it. >.>
The MAGLDR seems to work fine, the android doesnt work, or load anyway.. I an go into USB flasher, option 5 on the boot menu, and reload android, but it does not resolve the problem.
Any suggestions oh wise XDA members?
I am not an expert when it comes to the hardware side of tbe HD2, bjt I am learning. It kinda sounds like you may have got some water inside the unit either through the speaker opening t the top of the front of the phone or in around the small openimgs around the buttons at the bottom of the front of the phone. My bet is it was the buttons cuase this is close to the digitizer. And it sort of sounds like the digitizer is malfuncting.
Seeing as you have tried reflashing the ROM the only real sugestion I got is maybe get you a small hex head screwdriver and open up your HD2. Take the mainboard out and the digitizer out and very lightly use a hair dryer on the low setting to try and dry them out. make sure to bold the dryer a good distance from them cause you do not want to get them hot just dry them out.
Now you still have a waranty I would just do a warranty exchange or have them repair it. If you don't have a warranty and don't want to try this I do not blame you. It is just the only idea I have. You can always find a cell phone repair shop and have them do it.
Best of luck.
This happened to me too. My HD2 was completely submerged, but luckily for me I had the torx needed to immediately open it up. I didn't use a dryer, but I did towel it off. Then I just left it off and apart for 5 days before I actually put in the battery and turned it on. I did have to replace the screen because it cracked to hell, but my main concern was knowing that it would still function. Good Luck.
Okay, I contacted HTC today after reinstalling winmo 6.5 stock for the HD2, A guy named bob told me I could send it in and have it repaired covered by HTC. My guess is that because the water damage indicators are white, they shouldn't void me, right?
I am guessing it IS the digitizer because of the following reasons.
Winmo works fine, though the sim card will need to be replaced, which is no problem. the touch screen does not function and the screen is still black and wont light up, but winmo boots successfully, like I said, viewing under bright light.
I think I am going to try and send it to HTC, if they say its void, then I am going to try repairing the digitizer, as the tmo digitizers are readily available now. Before that though, I will try your suggestion T-Macgnolia.
I'll post my results soon!