does anyone knows if the touch flow 3d can work on the cruise ? and if it does, where can i download it and configure it.
thx
No because the Diamond is a VGA device and Cruise is QVGA and the lack of drivers might cause problems too.
Mind you, I think I've previously seen a thread on these forums about someone working on a QVGA version but I can't find it now.
thx mf
i hope it will work on the cruise
manila qvga http://forum.xda-developers.com/showthread.php?t=398173
JAYmasta said:
manila qvga http://forum.xda-developers.com/showthread.php?t=398173
Click to expand...
Click to collapse
Does not work (2 max 3 FPS) on Cruise because there is not the Direct 3D enabled.
udK said:
Does not work (2 max 3 FPS) on Cruise because there is not the Direct 3D enabled.
Click to expand...
Click to collapse
Sure but this one is port, all other it's something like not original....
Related
any news for video driver for HTC Touch
or news about TouchFlo 3D Or Any Like new application ?
Diamond youTube
Is there is any prog that convert WM6 Menu's to friendly touch menus
Dr.Mazika said:
any news for video driver for HTC Touch
or news about TouchFlo 3D Or Any Like new application ?
Diamond youTube
Is there is any prog that convert WM6 Menu's to friendly touch menus
Click to expand...
Click to collapse
Don't know if this is what you're searching for.... I think is similar enough to Touchflo 3D...
http://www.throttlelauncher.com/portal/index.php/the-news/1-latest-news/65-touchflo3d
Will be available this weekend if everything goes ok .
I have notice the diamond rom floating around and have not seen the touchflo 3d with it. Is it not on the rom or is it being removed by the cookers and I like throttlelauncher program. Just wanted to point that out.
APBilbo said:
Don't know if this is what you're searching for.... I think is similar enough to Touchflo 3D...
http://www.throttlelauncher.com/portal/index.php/the-news/1-latest-news/65-touchflo3d
Will be available this weekend if everything goes ok .
Click to expand...
Click to collapse
I'm waiting for it
Hi guys! I've beem looking for cab of Touch Flo 3d or Manilla 3d, but still found nothing! I have HTC Universal and just want to try this because it has vga screen too. But I found nothing except some port of manilla 2d, but not 3d. What is the difference and where can I download the cab of TF3D?
Thank you and sorry if im stupid
Nobody wants to help?.. =(
Is this the one you are looking for??
http://forum.xda-developers.com/showthread.php?t=405749
sidd said:
Is this the one you are looking for??
http://forum.xda-developers.com/showthread.php?t=405749
Click to expand...
Click to collapse
That's just a setup cab for Manilla if you already have it installed.
Does anyone know where the Manilla 3D cab is?
http://forum.ppcgeeks.com/showpost.php?p=514336&postcount=2
here is the manila and manila engine. you need to install both. although I don't think it will work for your device unless you have the proper open gls drivers and graphic accelerators. but best of luck.
fdimitris said:
Click to expand...
Click to collapse
Huh? You make no sense.
I recently hard reset my phone, as im still running the stock rom, it drives me up the wall having put back my theme mods.
So ive made a cab which will install:
flat black start/program bar today theme tsk (no more beveled bar)
large start menu background (if you have touchflow large start menu on)
flat black wallpaper
works great with Manila Rhodium VGA
Mirror: http://rapidshare.com/files/213475619/PLAzmA_Black_Mod_Pack.cab.html
So all those nice Rhodium Apps are not running on the Omnia, is that right?
But why? Because different Screen-Resolution or because its not a HTC-Device?
z3ntn3l said:
So all those nice Rhodium Apps are not running on the Omnia, is that right?
But why? Because different Screen-Resolution or because its not a HTC-Device?
Click to expand...
Click to collapse
the release by XBmod is VGA, it was originally ported from WVGA i belive, as long as you can find a version thats the right resolution it should run, no idea where you can get it maybe ask xbmod if the extracted it or has it in cab format.
z3ntn3l said:
So all those nice Rhodium Apps are not running on the Omnia, is that right?
But why? Because different Screen-Resolution or because its not a HTC-Device?
Click to expand...
Click to collapse
1. The Omnia has different graphics hardware than the HTC Touch Diamond-Pro series (which just so happens to be the same hardware on the upcoming second generation aka Rhodium and Topaz or Pro2 and Diamond2) which have an ATI chip. The Omnia has and Intel Xscale Direct 3D chip which is integrated into the CPU. I believe the Diamond and Pro's card is not and is totally separate.
2. The Omnia runs at 400x320 or WQVGA. The Blackstone runs at 800x480 WVGA as well so installing on the Blackstone was as simple as cabbing it up (which btw isn't so simple). The Touch Pro and Diamond run at 640x480 and porting Manila2 to these devices was hard enough.
3. There is already Manila 2D from the Touch 3G and Opal (iolite) working on the Omnia which is good enough. Check this out if you already haven't (http://www.modaco.com/content/i9x0-omnia-http-omnia-modaco-com/273892/complete-install-guide-for-manila-touchflo-2d-on-i900/)
thanx for this plazma. works great on my touch pro.
one request however, it works fine in portrait mode but not in landscape. is it possible you can add that in as well?
jonnrb said:
2. The Omnia runs at 400x320 or WQVGA. The Blackstone runs at 800x480 WVGA as well so installing on the Blackstone was as simple as cabbing it up (which btw isn't so simple). The Touch Pro and Diamond run at 640x480 and porting Manila2 to these devices was hard enough.
Click to expand...
Click to collapse
240x400 (i'm sure it was probably just a typo)
redd214 said:
thanx for this plazma. works great on my touch pro.
one request however, it works fine in portrait mode but not in landscape. is it possible you can add that in as well?
Click to expand...
Click to collapse
Try a soft reset, if it still doent work can you post a screen shot.
Does anyone know where can I get TouchFLO 3D 2.6 for Diamond 2?
I think the closest you can get is 2.5.
where can I get TouchFlo3D 2.5?
I am using Diamond 2 with WM6.1, does it able to install touchflo3D 2.5?
Kindly advise. Thanks!
try the sunx rom manila 2.5 (!!!!!!!!!!) .. available for 6.1 and 6.5 ....
testet both and atm i think 6.1 is a bit better in speed and less bugs.. but that's just my opinion and its just a quick check^^ ....
...test it by your own ... wont be emberrasing
This is the Diamond forum, you're better off in the Diamond2 forum if you own that device.
That said 2.6 will never work with any MSM72xx devices according to conflipper. It is made for the HTC Quillin which uses a different chipset and thus a different GFX chipset.
And don't follow the suggestions of these guys, you'll probably brick your Diamond2 if you install a Diamond ROM on it.
jep sry overreaded the "2"
I have a htc diamond 1 and I would like to put the touchflo 3d manila 2.6 does this version agree has my phone ?
bl996 said:
I have a htc diamond 1 and I would like to put the touchflo 3d manila 2.6 does this version agree has my phone ?
Click to expand...
Click to collapse
No.
MANILA 2.6 WILL NOT WORK WITH OUR DIAMONDS!
ok i got htc touch diamond updated to wm 6.5 but when i click on lanch htc sense it says unable where am i able to download it again?
I was wondering if we could install TouchFlo 3D to Mega, love the 2D but 3D will be cooler ... TIA
I have the same wish......
help!
I think the most of us ;-)
Touchflo customizer
Is there any customizer program for Touchflo?
Any link?
for the touchflo 3D u need a graphic accelerator, so i've read somewhere
flopyro said:
for the touchflo 3D u need a graphic accelerator, so i've read somewhere
Click to expand...
Click to collapse
Hope so one can update us ... real soon ... I'm losing interest in this phone ... sigh
flopyro said:
for the touchflo 3D u need a graphic accelerator, so i've read somewhere
Click to expand...
Click to collapse
Its got the same chip as Touch HD doesn't it though? I have the HD and my gf just got a Touch2... I must say the 2d TF is REALLY FAST. Wish the 3D one run as fast on mine
for the touchflo 3D u need a graphic accelerator something that our devises dont have..
but ive installed the SPB Shell that works fine and its similar to a 3D, BUT
it changes completely the skin and the apps of my phone something that i didnt like so i removed it
The mega is a QVGA screen. Touchflo3D is for VGA devices. You would need it ported to QVGA and the graphics accelerator as previously mentioned.
This was tried on the Vogue, and was fruitless.
spandeli said:
for the touchflo 3D u need a graphic accelerator something that our devises dont have..
but ive installed the SPB Shell that works fine and its similar to a 3D, BUT
it changes completely the skin and the apps of my phone something that i didnt like so i removed it
Click to expand...
Click to collapse
So i did ... TouchFlo on Touch2 is working really fine and i like it ... spb Shell is nice but ... cracking the beaty of the phone ... it's looking like a 10 year old menu ...
So ... How did u do it?