Activesync Problemsq - Windows Mobile Development and Hacking General

Hi,
If anyone experiences the irritating problem with activesync that after being cradled and uncradled a few times refuses to connect. This has been a problem on 4 different PCs since 08/2008
The only way to solve this normally would be to restart both the PPC and the PC, I've found that if you run services.msc after receiving the "Active sync cannot connect to the mobile device" error message, you will notice that the DHCP service has stopped (I dunno why) restart it, close Activesync on the PPC and recradle, Voila! It now connects perfectly.
Hopefully this will help anyone with a similar and equally irritating problem!

Related

Problems connecting to Exchange server

OK, this has been working all week and suddenly yesterday, it seems that I could no longer connect to my Exchange server. When I try (from Pocket Outlook) it says "Connecting" and never connects. When I try from ActiveSync, it just sits there saying "Synchronising" and never does. Although I can certainly still see Exchange through the web mail feature and on my desktop PC. Anyone encountered a similar problem? Did it lie with the server or the client? It seems odd as there's nothing that I did between it last working and it not working. Since then, I've tried removing the ES from Activesync and readding it and rebooting the server. :?
I have been having similar problems. Sometimes it synchronises well, other times I get error messages. It seems to have nothing to do with whether the telephone reception has lots of bars, and it seems to work with G rather than U.
If you're using "SSL workaround" (http://support.microsoft.com/default.aspx?scid=kb;en-us;817379), and have multiple network cards, you must allow access to Exchange-OMA virtual directory from both/all IP addresses. This fixed similar problem on my side!
If this is when using your USB cable to connect to your pc to connect to the network, i had a similar problem, all AS 4.1 would do is say 'connecting'
I resolved it by removing the USB cable from the exec, removing AS, rebooting, reinstalling AS, rebooting, wait for AS to start then turn on the exec and connect via USB cable.
I had a similar problem a few days later that i was able to resolve by rebooting my PC with the exec disconnected, waiting for AS to start before reconnecting the switched on device.
HTH

Active sync.........is NOT active? Resolved!!!

Hi, I had no problem at first with my own O2 mini s, but was unable to conect my wifes to the laptop (Dell inspiron 6000) so we were about to take it back as it would NOT connect at all (just the normal connect bleep then nothing). Just in case it was a problem with the rom install I rebooted it. Still no connection. Having read about the "basic" option on this board I also rebooted my device. mmmmmmmmmmm...... now that wont connect either!!! I have tried rebooting both devices and used the "personnel" options, still no joy??? If I open active sync on the laptop and try the "connect to device" option, i get a "no device found" message. Windows!............what a pile of crap! Anyone else had this problem or have any suggestions. regards, Pete
just found this!
http://www.modaco.com/ActiveSync_4_issuesl_Microsoft_want_to_help_-t230325.html
its an upgarde, problem sorted.
The aboce link fixes the problem with a download of Active sync 4.1
seems there are issues with some firewalls.
Both of our XDA mini s now connect via usb.
regards, pete
Harumph
Didn't appear to fix mine it just sits there and says retrieving settings endlessly.
My Xda mini S connects to my laptop no probs, but it won't connect to my desktop. I have Sygate PF running and Windows Firewall. Windows firewall looks to have the right settings.
Hmmm.
hi . i have this same problem. i cant connect to my laptop - i only see RETRIEVING SETTING
on my desktop q9100 working well (thx god). any solution? please help
active sync problem
I WAS using sygate firewall as well and having BIG problems with the Wizard sync (get settings for several days). Reading this topic I just shut down Sygate and guess what. Ik works great. Thanks for bringing me the solution!!!
General Failure
ok, but i have not using any firewall. even windows firewall. i connect another wizard into the same laptop and just works fine. but my wizard doesnt work. please help
baja

Activesync 4.1 - not working

Can anyone help please?
I cannot get my xda mini to sync. Basically it just keeps running and nothing happens.
I have researched a lot of threads which refer to setting up a dummy server connection for what I presume is the the "exchange server" which I have attempted - is this a false IP address please?
On my PC, activesync diplays Exchange Server and my XDA with a list of the sync items below.
I keep getting a message on the XDA saying it cannot retrieve an IP address for the connection. Sometimes when I sync the try to connect via GPRS
I do have a wifi connection set up which now works (most of the time).
TIA.
I have the same problem as you with my QTEK 9100. Sometimes it works to connect the device to my portable computer (Compaq Presario 2800) via ActiveSync but mostly it does not. ActiveSync just keep looking for the device but doesnt find it.
I have also tried after that I have turned off the firewall and antivirus software, but it still doesnt work. The few (2-3 times) that it did work I had my firewall and antivirus running.
Anyone have an idea what I should do? It's a brand new QTEK 9100 (just got it a few days ago) with ROM 1.3.7.13 SVE, ROM date 9/29/05. Since I can't connect my device to the computer I can't upgrade the ROM.
turn off your firewall
disable your onboar intell wifi card if you have one
Does this happen to your device when you connect to Activesync immediatly after soft-resetting the device?
I have a similar problem, but I have no problems when I connect to AS for the first time, if I try connecting again before performing a Soft-reset AS won't find the device and the device becomes unasable, only soft-reset solves this problem.
Anyone else with these symptoms?
nolovelust said:
turn off your firewall
disable your onboar intell wifi card if you have one
Click to expand...
Click to collapse
thanks but as I said I have turned off the firewall, and I don't have a built in wifi card in the laptop.
macrinus said:
Does this happen to your device when you connect to Activesync immediatly after soft-resetting the device?
I have a similar problem, but I have no problems when I connect to AS for the first time, if I try connecting again before performing a Soft-reset AS won't find the device and the device becomes unasable, only soft-reset solves this problem.
Anyone else with these symptoms?
Click to expand...
Click to collapse
Yes it is the same problem no matter of the soft reboots. The only times I get it to work is when I have reinstalled the activesync 4.1 software on my laptop, after a reboot (of the laptop) it does not work; instead it only display a network icon with "Limited or no connectivity" (this is also without both firewall and antivirus installed) when I connect the device. The result is that AS can't find the device...
My theory is that it somehow looses the USB drivers installed with ActiveSync 4.1 when I reboot the computer. Anyone know how to fix this? Which (dll?) files belong to the USB drivers? I might be able to manually replace them in the correct path if I find that out...
any news??? I just met the same problem
simple enuf chaps...
i just met the same problem and the fix is pretty simple...
remove a/s 4.1
re-install a/s 3.7 / 3.8.1
re-establish the partnership
re-install 4.1
How do you get a connection between a WM5 device and ActiveSync 3.7 or 3.8?
I cannot get a partnership.
Is this because a WM5 uses IP-protocol for the connection?
thanks
Peter
I am using Dopod 838, the asia version of Qtek9100.
I also seems to have problem on activesync 4.1 which keep on sync and fail to connect. When it fail. I will try
1) In Windows Task Manager, kill wcescomm.exe
2) Kill everything in wizard
3) manually turn-on activesync4.1 on pc again.
4) connect wizard with PC again..
I just bought my phone for 2 days and i have to try a few more times to confirm it really helps.. may be you can give it a try too.
PeterP said:
How do you get a connection between a WM5 device and ActiveSync 3.7 or 3.8?
I cannot get a partnership.
Is this because a WM5 uses IP-protocol for the connection?
thanks
Peter
Click to expand...
Click to collapse
you will need AS 4.0 and above for all WM5 devices
You might want to check device manager when your device is hooked up via USB and make sure there are no exclamation marks on your handheld device.
I have a laptop and I only installed ActiveSync 4.1 and it works fine. I've even re-imaged my laptop since getting the phone and wasn't a problem second time around. I also installed 4.1 on my work PC and it works fine there too.
Not sure if you can use anything older than 4.0. (Not sure the reasons why)
At work I tried to use 3.8 (Just for the hell of it) but 4.0 updates all the USB drivers and stuff. Anything below 4.0 will not recognize WM 5.0 devices as jfran said. After installing 4.x I don't know the reason or need to uninstall then install something older then uninstall and reinstall 4.x.
It should work straight after install. However I do NOT know what happens if by chance you had an older version of ActiveSync then tried upgrading to 4.x. Should work though. I know people have had success upgrading from 3.7 and 3.8 to 4.1 to use the newer Dell Axim x51v which have WM 5.0 here in my environment.
Thanks everybody for your replies,
it was after hamish_dy tip I wanted to know how to get an connection between AS3.x and a WM5 device, since I haven't been able to do so. And I also have read that WM5 needs AS 4.x in order to sync.
Have had my Qtek9100 now for a week, and have been studied this forum in detail for a solution on my problem.
Previously I had a Qtek S100 which synced with my laptop together with AS 3.8. My company uses Groupwise as e-mail system, but with Outlook 2002 also installed on laptop I got it working (also after some days of trial).
Now with my Qtek9100 nothing happends when I plug in the USB-cable. Well not true, it will connect with an IP-address and I can from AS see the filestructure on my Qtek, BUT nothing starts syncing (calendar, contacts, e-mails,etc.). I watch task-manager but nothing kicks in. Previously with my S100, mapisp32.exe always kicked in and was the magic component between outlook and groupwise. With AS 4.1 everything is dead in task-mgr. I also receive the 85010014-error message sometimes.
Have uninstalled AS 4.1 several times, cleaned out registry of AS keys, rebooted, installed AS again, reinstalled outlook, turned firewall off, turned antivirus off, soft-reseted my qtek, and so on. Have downloaded the swedish version of AS 4.1, since my Qtek has swedish language, and thought that was the reason. But no. Soon out of options and ready to take my new qtek back to the dealer.
Any help from anyone is very much appreciated.
thx in advance.
Peter
----------------------
ROM: 1.3.7.13 SVE
ROM-date: 9/29/05
Radio: 01.04.10
Protocol: 4.0.13.17
Ext Rom: 1.3.7.125
One thing you should try before sending your device in is to try sycnching up on a clean machine, i.e. (a freshly imaged machine)
I'm assuming initiating a manual sync does nothing?
ccisn said:
One thing you should try before sending your device in is to try sycnching up on a clean machine, i.e. (a freshly imaged machine)
I'm assuming initiating a manual sync does nothing?
Click to expand...
Click to collapse
No, manual sync does nothing.
If I can't find any solution before mid-next-week, I will find a workstation at work and load only the minimal components/applications needed and try to nail down the issue, as a last try. I work with IT myself so I'm not keen to reimage my laptop, there are just too many things to reinstall.
thanks for the advice!
Peter
Active Sync Sync via USB Resolved (well for me anyway)
Over the last month I have not been able to sync my Wizard to my laptop via USB. Via bluetooth worked a treat, but I was not able to upgrade ROM via btooth.
This morning, completely by accident I resolved the issue with USB sync'ing to Active sync 4.1.
This works for me:
1. Connect Wizard to laptop via USB (you will get the usual problem, with ActiveSync saying "Connecting" and nothing else
2. Whilst phone is still connected via USB perform soft reset on phone
3. The laptop system tray should display "Found new USB device" and then say "Pocket PC USB Sync found"
4. When the laptop / pc has finished installing software and displays "Your new hardware is installed and ready to use" Disconnect the USB cable from your Wizard.
5. Wait a couple of seconds and then reconnect your Wizard via USB and hopefully it will work.
Please let me know if this works for anyone else!
One more thing you could try before throwing it back at the salesman is to check your network connections.
Go to Control Panel and select network connections - make sure you are set to view details and look for the "Local Area Connection" that has a description of "Windows Mobile-based Device". On mine it is "Local Area Connection 3". You may have to scroll to the right to see the description.
Right click the relevant connection and then click "properties". Make sure that the following entries ONLY have a tick next to them.
Client for Microsoft Networks
File and Printer Sharing for Microsoft Networks
Internet Protocol (TCP/IP)
For some reason on mine none of them were initially selected :?
Click OK, when I did this it started syncing straight away!
Good luck!
I am also having a problem with activesync 4.1, up until now i have been able to sync perfectly via bluetooth or usb. However now when i try and sync activesync on my PC says connecting and nothing happens!!
I have tried everything, uninstalled, reinstalled, installed on my laptop (same problem)....
Given i have the same problem on 2 different PC's i am starting to think that its actually the Mini S and not the PC thats the problem. I feel a hard reset coming.............
s4vva said:
I am also having a problem with activesync 4.1, up until now i have been able to sync perfectly via bluetooth or usb. However now when i try and sync activesync on my PC says connecting and nothing happens!!
I have tried everything, uninstalled, reinstalled, installed on my laptop (same problem)....
Given i have the same problem on 2 different PC's i am starting to think that its actually the Mini S and not the PC thats the problem. I feel a hard reset coming.............
Click to expand...
Click to collapse
Hard reset has done the trick, so it turns out all problems may not be down to our pc's......
The same thing happens for me sometimes. What I have found ou this helps.
Unplug pda from sync cable. Kill all active programs on the pda. Plug in sync cable again. Viola! It syncs.
I have the same trouble, activesync just says connecting and thats it, i havent found any particular reason for it. SR does not help, just HR which is kind of overkill. Im really glad for the sprite backup software. I have tried all different things i could think of while i couldnt sync and nothing helped. I have allready about 3 HR after me.

Activesync Disconnects

Hi,
I have been suffering with a persistant Activesync connection problem. It usually connects and syncs fine the first time I boot my machine, but after around five minutes it almost always disconnects (though my Vario II continues to charge). Unplugging and replugging the USB cable does not work and the Activesync icon remains grey. Trying to start the connection manually either from the Vario II or from Activesync on the desktop also does not reconnect the device. In fact the only way to get it to connect again is to reboot my PC.
I'm using Activesync 4.2 downloaded from Microsoft this morning. I've tried deleting and recreating the partnerships, which does not help the issue. I've tried several USB cables which also do not resolve the issue, so I am now asking for your help.
If anyone has any insights into whaty might be happening I would appreciate your help...
Thanks,
Chris
I'm having the same problem, but in my case unplugging the cable from the device and plugging it again usually restarts the sync. Sometimes, however, I have to soft-reset to get it working again. Very annoying.
Hi Chris,
Ive had tons of issues with activesync on my works laptop..... I use a VPN and zonealarm... I used to have tno issues but since I got WM5 wich uses IP address's it always does the same thing as yours.. ive made sure the IP address is allowed in zone alarm.... my colleague also had this issue.. he managed to solve it by using a differnet USB port as his laptop has 3 one is on the side of the machine ... try using a different USB or disable zone alarm if you use it this could be causing the problem.
I sometimes get it to work if I have no VPN client running but as soon as I do use it the active sync stops.
Hope this may help you
James
I have exactly the same issue with my Vario II, never happened with my Vario and I have changed nothing other than my phone. Makes me think its summin to do with the harware possibly? Anyone else found a cure for this?
I Had the same problems, so I gave up on USB connection with active sync, I have 4 USB ports on my laptop and tried all, I now use bluetooth and works everytime.
There has always been problems with USB and actgive sync, so 4.2 was suppose to fix, but not for me.
I've got the same probelm on my Tytn. I've solve it to delete the Pocket Mechanic :shock: , I've done a S.R. and from now on the A.S. works correctly.
Ciao, Cesare
Had to use my old vario for a bit today, used activesync and it worked fine for the whole time I had it plugged in, got a new Vario II replacement today, got home and its exactly the same, would appear to be a mismatch between Vario II and activesync 4.2, can I connect by wifi?
Hello hmm the problem is if it uses direct or ip ,try go settings - connections - ( usb to pc ) and disable advance network funtctionality.
Hope that works
thanks
I had this problem too - I disabled advanced network capabilites in the "USB to PC" control panel under the Settings/Connections folder, and then Activsync stayed connected after that.
HTC TyTN 7/22/06 ROM
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
After the activesync working fine with my orange spv3100 for 4 weeks it suddenly refused to connect. I un-checked the "advanced functionality" box as suggested and it works again. Many thanks for the solution peeps.
I too would like to know what functions this deactivates.
Same problem, I've installed ActiveSync 4.5beta and now it stay connected, sometimes it disconnects but after restart of the phone it works again, one friend told me that the problem comes from the Activesync in the phone, so may be we have to look for the problem in the phone not in the PC
Activesync 4.2 problem
Hi all,
I too started having the same problems with Activesync 4.2 hanging my phone if left charging overnight. I decided to disable the advance network connection and that worked for a while. Now the phone wont sync AT ALL. It charges, but I can't do anything else. I reinstalled the Activesync 4.2, did a soft reset, off-on to the mobile, turn off-on my computer and still nothing. I will d/l Activesync 4.5 beta to see if that solves the problem, but it looks to be a problem with the Activesync in the mobile and not the one in the computer. I did the troubleshooting and it is detecting the USB connection but does not sync. I would really like to know if wireless sync can be achieved. Will post any fix if I find one. BTW my mobile is about a month and a half.
activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
pls help here im tired of this activesync problem
thank you
Sync problems with tytn
I've read through all the messages in this thread and wondered if someone could help me with some problems i've been having with syncing mine with a laptop. Often when I have the device plugged in when i boot up the laptop activesync won't start until i've disconnected the usb cable then reconnected it again-i never had this problem with the imate jam. My second problem arises when sometimes it says on the files section that there are un resolved items???? i then try to resolve the issue and a wizard comes up with add or remove buttons.afraid that i might remove something essential i tried the add button hoping this might resolve the issue-it didn't. i then gave up as nothing worked. after switching the laptop off and then syncing a day later there were no items to resolve so what exactly is happening. how can there be unresolved items one minute and nothing the next.also i hadn't done anything different on the tytn.if i select the add button on the window does it add a copy of the file highlighted and could this affect the operation of the device.Sorry if this seems a little confusing but i never had this problem with an xda exec or an imate jam.
please could someone help a non technical fifty something.
activesync always disconnect
fantastic_mr_q said:
Just given that ago, Took me 5 attempts for the usb to pc connection settings screen to show up but then I realised it had to be plugged in to do it! Duh! What features do I loose by disabling ADVANCE NETWORK FUNCTIONALITY?
Click to expand...
Click to collapse
hi,
where can i find ADVANCE NETWORK FUNCTIONALITY
I agree, where is this option?
I'm running version 4.2 and along the top bar all I'm seeing is:
File - View - Tools - Help
Nothing like "Settings" and/or "Connections" in sight. Under "File" there is the "Connection Settings" option, but nowhere does it mention "Advanced Networking Functionality".......
Can someone explain this please?!
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
pof said:
The "Advanced Networking Functionality" is on your phone, not on desktop's activesync.
On WM5, go to Settings -> Connections -> USB to PC and you will find the "Enable Advanced network functionality" option.
Click to expand...
Click to collapse
Every time I try that, I just get an error message saying: "Failed to disable RNDIS to use Serial".
Has anyone else seen this message? Happens regardless of whether the Vario II is connected by USB or not...
Thanks,
Chris
I'm still getting the RNDIS error, has anyone else come across this? Is there a solution?
Cheers,
Chris

qtek s200 connection

hi, i have a qtek s200 and it no longer connects to the internet thru my pc anymore, havent found out why, and when i plug in my phone thru usb it gives me this error "Synchronization cannot be started because you are not able to log onto the network and access information. Restart your desktop computer and synchronize again. If the problem persists, contact your network administrator. " So i restarted still nothing, deleted phone and reinstalled it again through sync center and mobile device center still nothing has worked, it worked perfectly an hour ago downloading weather updates for spb weather and now nothing only think that i changed on my pc was limewire/java. anyone have a clue whats going on?
thanks alot
swiftk1 said:
hi, i have a qtek s200 and it no longer connects to the internet thru my pc anymore, havent found out why, and when i plug in my phone thru usb it gives me this error "Synchronization cannot be started because you are not able to log onto the network and access information. Restart your desktop computer and synchronize again. If the problem persists, contact your network administrator. " So i restarted still nothing, deleted phone and reinstalled it again through sync center and mobile device center still nothing has worked, it worked perfectly an hour ago downloading weather updates for spb weather and now nothing only think that i changed on my pc was limewire/java. anyone have a clue whats going on?
thanks alot
Click to expand...
Click to collapse
Windows Vista?
Its caused by your notes..try unchecking your notes in activesync...or create a new profile in outlook

Categories

Resources