Database Users

Help plzz - Problem with X2 USB Driver on PC

Hello guys ;
I'm having a problem getting my X2 recognized on my pc ( running windows 7 ) ....
First ,i want to say that i have it before working on my previous windows 7 version without nay problem , when I installed this fresh version of win 7 , it didn't recognize it correctly and it search for windows update and locate a strange driver ( Microsoft sync usb ) which changes nothing at all..
i tried downloading windows mobile Device center separately and installed latest version with driver update , but it also doesn't recognize it it appears to be installing a new driver but it end with saying " Driver installation failed - unidentified device "
the mobile device center works fie but doesn't see my X2 !!!!
I don't know where is the problem,can you help ?

did you load MS Sync wiht the phone connected via USB? When I re-installed it on my Win 7 PC, it only loaded the drivers correctly after I had the phone plugged in and connected.
When getting active sync from Microsoft, I assume that you choose the Win7 version and not the XP version ... (just checking).
Not sure what else I can offer other then it is working fine with the connection via the USB and via BT (the BT connection is with my work PC -- also Win 7 professional, the home PC is Win 7 Premium).
Good luck.

I did , no sue
it either sas " unidentified device - or device unplugged " .. or it installs driver for Microosft USB Sync "
any ideas ?

try to disable McAfee Firewall(or any other firewall) and reconnect ur phone

i disabled antivirus and no firewall is running

[Q] Activate Diagnostics port on SGH-i637

Hi, please help me with this. I need to activate the Diagnostics COM port in the SGH-i637.
Some info about this phone:
- This phone has a 32 bit Qualcomm MSM7201A CPU and Windows Mobile 6.1 OS.
- When connecting this phone as Modem, only modem driver is installed in Windows.
- During Flashing procedure (Turn off phone, press J, connect USB cable to PC, do not turn on phone) a Qualcomm device is detected and installs a COM port.
- Entering *#197328640#, then Option 9 (Common), then Option 4 (Diag_HFK_Configuration) only UART3 and UART 2DM are available (no USB Diag)
- Entering *#7284# nothing happens. Running Emchanger.exe or dataconnection.exe, you can choose between PDA or USB mode, but nothing happens.
- This phone is very similar to Samsung GT-B7320 and GT-B7330, on those both phones, changing from PDA to USB works (entering *#7284#) and installs the Diag COM Port.
So, any clue if there is a way to activate the Diagnostics port on this i637 smartphone?
Thanks!

Samsung GT-B7330 QXDM
I'm also working with QXDM and Samsung phones. I'm trying to used the USB modem mode(*#7284#) on my GT-B7330 but I can't find the right windows driver for it. Could someone provide me with the Samsung USB modem for the GT-B7330
I've search on the web and although I found many versions I could not get one which worked with the GT-B7330
Thanks

Running Emchanger not happening
as i wrongly updated my gt-b7320 to AT&T sgh i637 windows 6.5 now some of the keys are not working and led is always on
when i connect the phone to pc no COM port is showing it doesnt enter in boot mode as when i do it manually by *#7284# it shows cant find emchanger.exe
so is it possible to get my orginial version back by flashing it with original file.....
can anybody help me.......
Thnks in Advance

I'm a programmer but have no experience in Windows Mobile/CE programming before.
can anyone send me windows folder from healthy b7320 so that i can study and get u guys a solution.

[Q] Problems with Magldr installation

I dont get a usb connection to my omnia 7
I tried it on 3 pcs 1 with 64bit 2 with 32bit and all usb ports
On all pcs I installed the usb driver
All pcs recognize my phone but the software gives this error:
[Error Description]:
Please make sure that your device is connected to your computer.
also make sure that right drivers are installed (SAMSUNG_USB_Driver_for_Mobile_Phones.exe)
Try to connect device to different USB port and also you can try to reboot PC.
Also you can try to exclude USB hubs.
[Info]: USBWorkDMLI_SAM.cpp (173)
anyone knows what i am doing wrong ?
regards chris

Hi,
I have exactly the same problem as chris1005, with an Omnia 7.
I strictly followed the instructions to install Magldr:
1) Installing Usb Samsung Drivers
2) Put my phone in download mode
3) Connect it to my pc
4) Launch "DMLI for Samsung V1"
And when i reach the "Connect" step, i get the "173" error (view attachment).
I run on a Win7 x64, my phone is developer unlock.
Thanks for the answers

I had the same problem, but it was solved when I used a USB port on the back (connected to the motherboard) instead of one on the front (connected trough a hub).

Hi,
Thanks for your response, but i tried this method, it doesn't work too, whether the usb on motherboard or the usb hub.
:/.
I don't know where this is blocking.
Is there any other solution to flash a rom on an Omnia 7 than the DFT solution ?
Thanks.

I flashed back from 7.8 to 7.5 and had the same problem again, but ater I rebooted my computer, it worked.
Try to follow this: http://windowsphonehacker.com/articles/tutorial_how_to_install_magldr_and_custom_roms_on_samsung_devices-02-08-12

NdotGdot said:
I had the same problem, but it was solved when I used a USB port on the back (connected to the motherboard) instead of one on the front (connected trough a hub).
Click to expand...
Click to collapse
I tried every usb port on my Pc still doesnt work
tried everything mentioned on xda dev about the problems with the magldr
regards chris

[Q] SM-G900H trouble with USB connection.

Hi all.
Trouble with my S5 SM-G900H!
I have a fresh install of Windows7 SP1 64bit. After connecting the phone cord (factory, MicroUSB 2) relatives in Device Manager appear strange device: "Conmeon Suspend", "CDC ACP", "CDC NCM". Set Kies3 through it put the Samsung USB-drivers. None of these devices is not defined.
After you connect to a computer on the phone is turned on and charging no more signs of connection to a computer is not.
In the "Tethering and Mobile hotspot", even when the cable is connected, item "USB tethering is hidden," written under it "No USB device connected."
Connecting to Windows7 32bit gives the same result.
After connecting to a computer with Linux on lsusb shows the device "Conmeon" and nothing else in the system appears.
Made a hard reset to factory settings - does not help.
How to revive the USB-connection?

Did you installed latest Samsung USB device driver??

..

fffft said:
Not sure about the G900H, but other variants use *#0808# to access it. Your settings there should be MTP + ADB & AP.
Click to expand...
Click to collapse
Big thanks!!! All works!

..

[Q] Windows does not detect my phone

Hey guys. I have a problem with my SGY. Windows does not detect it, tried different cables, but no luck. Running Windows 8.1.
I have also tried it with a different PC, with Win XP, it works. I also ran Live Ubuntu, it also detects it, so it's a problem in Windows.
Tried reinstalling Kies, USB drivers, but it doesn't help, no yellow triangles in Device Manager.
Odin does detect the phone while it is in Download Mode, it is in COM3.
Does anyone know what to do here?

xddxd said:
Hey guys. I have a problem with my SGY. Windows does not detect it, tried different cables, but no luck. Running Windows 8.1.
I have also tried it with a different PC, with Win XP, it works. I also ran Live Ubuntu, it also detects it, so it's a problem in Windows.
Tried reinstalling Kies, USB drivers, but it doesn't help, no yellow triangles in Device Manager.
Odin does detect the phone while it is in Download Mode, it is in COM3.
Does anyone know what to do here?
Click to expand...
Click to collapse
Follow my instructions for how to get windows 8.1 to recognise your phone - links in my signature
Basically
Install Samsung USB drivers from my firmware thread
Remember in Windows 8.1 you have to run the setup in compatibility mode - right click the setup file - click properties - select compatibility tab - select run this programme in compatibility mode for - select windows xp sp3 - apply
Run the setup - it will now run & install
Plug your phone into the rear USB port (any if on laptop)
Now plug in any other USB device that you have already installed eg a USB mouse dongle
Windows 8.1 will now detect your phone

marcussmith2626 said:
Follow my instructions for how to get windows 8.1 to recognise your phone - links in my signature
Basically
Install Samsung USB drivers from my firmware thread
Remember in Windows 8.1 you have to run the setup in compatibility mode - right click the setup file - click properties - select compatibility tab - select run this programme in compatibility mode for - select windows xp sp3 - apply
Run the setup - it will now run & install
Plug your phone into the rear USB port (any if on laptop)
Now plug in any other USB device that you have already installed eg a USB mouse dongle
Windows 8.1 will now detect your phone
Click to expand...
Click to collapse
Thank you for your help, it worked!