Hello, please if anyone knows the solution to my problem:
I bought a Tmobile MDA from a person who just flashed it with a Tmobile demo rom v4.21
MDA works normally when on craddle (charger) but when on battery it goes dead after i press power button... So, when I take it off the craddle it works normally on battery (battery is supposed to be brand new) but once turned off, the screen blinks once and MDA is dead.
When I just put it on craddle for a second i can turn it on and it works normally again...even on battery...
He is out of town and will be back on friday. He sais that this is a software problem and will be solved by flashing with XDA developer ROM.
Could that be true? The battery seems to bi OK until I press the power button...
I tried flashing ROM via USB but I get error 011 - execute remote communication program error....
Please help...
Thx in advance
valsimoT
hi. this is very strange to me. The software doesn't cause this problem. my be you look around the connector if the one of the bin is bent or broken. I am not sure but if you think the software problem, go ahead and upgrade the rom.
Thanxs for reply.
but MDA works on battery until it turns off automatically (power save) or if I press power button... When on craddle, power button works normally...
I can make calls and everything on battery but when I turn it off - id goes dead ((
I got o2 xda executive for very short period but I found problem that my phone does not standby and always shut down itself within one or two hours even power button press , my machine is still not working at all . The last chance is just plug in usb adapter for restarting again and again ,anyone gives the comment.
Hard reset doesn't work , I did that!
Sounds like a dead battery to me.
I recently ran the battery down on my s110.
when i plugged it back in to charge i got and error code xxx:xxx:xx can't remember what it was but since then when i use the power button the phone hangs and only responds to soft/hard reset and then hangs again at power off/on
any help appreciated. its less than a year old so it should be under warranty.
Hello, a while back I posted a charging problem, which turned out to be the Mini-USB and Wall Charger was bent, and before that, the Mini USB outlet in the phone broke entirely. Well, another problem has arisen, as finally got a new charger yesterday, and worked perfectly. So, I shut it off, and left it to charge overnight. Now, the problem? All of a sudden, it refuses to boot. Held down the power button for 5 seconds, 20 seconds, and a full minute. Nothing. Any suggestions?
~Infinity
nothing AT ALL? or the screen turns on and gets stuck?
if nothing at all happens, try the battery jump start method
Well, after constant trying at starting the phone, I managed to have it boot after hours. What happened? During the boot,where it displays Windows Mobile 6, a line appeared, and the phone darkened, and then crashed.
What the hell.
I suggest a hard reset......
BASSMANBOB said:
I suggest a hard reset......
Click to expand...
Click to collapse
....................And how can I hard reset when it doesn't boot, and whenever it does, crashes during it?
Anyone that's here help?
I'm currently having the same problem with mine. Hard resetting didn't work for me but you may as well try it.
If you can get it to start booting for just a few seconds you can hard reset it without loading the operating system. As soon as you get it to turn on, hold down the Wifi and Voice command buttons (one's on the left, one on the right). After holding those down, press the soft reset button (the little button on the right that you can press with your stylus) very quickly and release it. If you hold the soft reset button too long, it will perform a regular soft reset and you'll have to start over, so do that quickly.
A black screen should come up and tell you to press your send button to hard reset your phone.
I have similar problem,It's turn on to the logo that's always shown when boot and then it show the logo till it discharged.I tried hard reset,but it's still the same,i post 2 topic's in this website and no one help me
i too am facing the same problem, i was able to start it a few times but it crashed after a few seconds each time. i m gonna charge it all night and see if it starts. right now all i m getting is the red led. i really hope someone finds a solution soon.
With me it was my battery that caused the problem. Try it with the battery of another wizard. Succes, Rietje
ok so i charged it for more than 12 hours and my wizadr still didnt start.
I then got a NEW BATTERY and my wizard turned on within the very moment i pressed the power button.
So any one who is facing a similar problem should try a new battery.
Yea,this is a second time when i have this problem.I both A new battery,BUT IT STILL THE SAME!!!
First time when i both a new battery it was working fine,but now the battery won't help
Infinity M said:
Well, after constant trying at starting the phone, I managed to have it boot after hours. What happened? During the boot,where it displays Windows Mobile 6, a line appeared, and the phone darkened, and then crashed.
What the hell.
Click to expand...
Click to collapse
faced a similar problem a while back. i replaced the battery and the phone was back to normal
someoneee said:
Yea,this is a second time when i have this problem.I both A new battery,BUT IT STILL THE SAME!!!
First time when i both a new battery it was working fine,but now the battery won't help
Click to expand...
Click to collapse
try a battery frm a friends phone. u ll be sure that the battery u r using works fine. if ur phone still doesnt work then u need to have it checked.
i have same problem,,and i use T-Mobile MDA Vario
is it just battery problem or not?and if the PDA inactive it can still charge or not?
and i usually use blackberry charger to charge my PDA,is it ok?and is there any possibility my PDA can't work again?i hope not
pls help me..
Well for starters, charging your phone overnight will probably damage the battery over time. It's only the newer phones and batteries that are able to withstand extended overcharging times without serious damage to the battery. With older phones including the K-JAM/MDA Vario, the battery is meant to be charged till its full, and no more. If you overcharge it, you run the risk of damaging your battery and possibly the phone too.
If a new battery hasn't fixed your problem, the problem lies in your phone's mainboard.
Try charging your phone from a USB port on a computer to see if anything happens.
Hello everybody,
I'm the owner of a G2 for about two months, everything was fine till yesterday, the battery was low so I charge it as usual, the phone was turned on, but one hour later when I checked it, when I checked it, it was off with just a red blinking light (notification).
I searched about the problem so I tried to hold the power button for a long time, tried to hard reset it by holding the button power and volume down for a whole minute but nothing happen for both. :crying:
I hope someone could help to solve this annoying problem, I'm desperate...
NB: - the red blinking does appear only when I charge the phone or connect it to pc.
- I also charge it the whole night but no result.
(sorry for my bad english)