Hello i have an 8525 and my screen turns white when i turn it on sometimes
or it works and starts fading to a different color >.<
need help please
Please please use the search button. The white screen issues have been extensively and often discussed - not a difficult search. In fact I think there's a thread on this page about it. so please use an existing thread.
Thanks
Mike
Related
Hi guys,
I accidentally dropped my phone and now the LCD screen went white and won't turn on at all, but the still comes on and rings. The display is the problem
What can I do??
Please help me
Hi
It would be better if you'd made a search before posting.
Same topic at http://forum.xda-developers.com/showthread.php?t=321659 .
Please next time do a search.
I just dropped my qtek S200. When I turn it on noe, I just see colored stripes, but the qtek seems to work normal, because if I use the camera button you can hear the "click" sound e.t.c.
What shall I do know? Please help me - I am quite in Panic know .-(
Please anyone?
Did the display cable come loose? You'll have to open the unit in order to rectify this. As I have just ordered a new case, I have searched for instructions how to do this and found
this step by step manual.
Good luck
Robert
Thank you very much for your help - I will try this out. I hope I can open it, because I am not very good in this.
How does the display cable look like?
I got stucked at this step: NOW CAREFULLY LIFT THE BACK COVER AWAY FROM THE FRONT AND NOTE THE SHORT SPEAKER CABLE, USE YOU TWEASERS TO CAREFULLY DISCONNECT IT
How do I disconnect it??
What exactly does the device do? Does it respond to charging? Does the screen have any response to being switched on?
The qtek works properly - that means I can use the com button and touch the screen where eg the bluetooth used to be and I can turn it on.
The camera button works too, because you can hear the click when taking a photo.
The only thing is, that you can only see vertical colored stripes on the screen that change their color after some minutes.
I just opened it now, but it did not help.
you have to buy a new one hahahaha
Hello everyone,
I have a problem on my phone. It is not very bad but still I would like to now if someone else experienced it. So, maybe 1 times out of 3 on power on, a little band of the bottom of my screen is seen on the top of the screen. As soon as I switch on my phone, I can see that the red text with rom version is cut on its bottom, and I see some red things at the top of the screen. I thought it was the so called "screen alignement" issue, but it appears it is not the same at all (but still, I think that I may have a very little SA issue, barely noticeable). As I said it is not very annoying (like 2 mm of screen is involved), but in landscape mode, my scrolling bar is difficult to use (maybe half of it disappear).
So if anyone else has the same problem, or some explanation, he is welcome!
Thank you
Toni
Sorry for the double post, but I think I maybe found an answer in this thread http://forum.xda-developers.com/showthread.php?t=321163
Everything is related to the connector of the screen. HTC can suck so much on some details like this... As I also have the d-pad problem, I think it must be that. Difficult to find the link at first sight!
Hi guys and gals
I have a stock standard Hermes JasJam with standard OEM software.
Sometimes the screen goes white and all the time none of the front facia buttons function.
I can stop the white screen by very gently dropping the unit face down on my desk about an inch and then the screen is normal however the buttons still do not work
Theorys?
Kind regards
John
There are many threads about this. Please use one of them. Here's a prime example:
http://forum.xda-developers.com/showthread.php?t=321163
Mike
hi i have a spv m3100 which has a white screen when it turns on and i cant see anything, it makes noices so it working but it not showing on the screen for some reason. Please helpp.
Fentonh said:
hi i have a spv m3100 which has a white screen when it turns on and i cant see anything, it makes noices so it working but it not showing on the screen for some reason. Please helpp.
Click to expand...
Click to collapse
Hi
We reuse threads here so please use the one I'm going to give a link to. Look out for posts about placing padding on the d-pad chip and ensuring the connector is properly inserted:
http://forum.xda-developers.com/showthread.php?t=321163
Oh and remember to use the search button on the brown bar above or the search sticky near the top of the threads page.
Mike
Closing this thread