hi i have a spv m3100 which has a white screen when it turns on and i cant see anything, it makes noices so it working but it not showing on the screen for some reason. Please helpp.
Fentonh said:
hi i have a spv m3100 which has a white screen when it turns on and i cant see anything, it makes noices so it working but it not showing on the screen for some reason. Please helpp.
Click to expand...
Click to collapse
Hi
We reuse threads here so please use the one I'm going to give a link to. Look out for posts about placing padding on the d-pad chip and ensuring the connector is properly inserted:
http://forum.xda-developers.com/showthread.php?t=321163
Oh and remember to use the search button on the brown bar above or the search sticky near the top of the threads page.
Mike
Closing this thread
Related
howdy all.
This is my first post so if this has been asked before I apolgize, i did do a search but came up with squat.
I have a tytn and a herald and I notice 2 major differences between the two in regards to the screen.
1) The herald's screen is WAY WAY WAY brighter, is there a way to make the tytn's screen any brighter? the tytn at max brightness is only about the half way setting on the herald.
2) maybe even a bigger difference than the brightness is the color, when I have the two side by side I notice that the color seems "off" on the tytn. I have a vista theme and the grass looks green (as it should) on my herald but it looks brownish yellow on the tytn. is there any way to change these settings so I can correct this problem on the tytn?
I could have sworn that I read about a app/reg hack to get more brightness out of the tytn but be damned if i could find it. oh and this is a cingular 8525 flashed to the hermes firmware, not sure if that makes a difference or not.
thanks for the help all.
Raz
Try a search on this forum for vjlumos.
Mike
mikechannon said:
Try a search on this forum for vjlumos.
Mike
Click to expand...
Click to collapse
Thank you!!!!
Now what about those colors.....
I just dropped my qtek S200. When I turn it on noe, I just see colored stripes, but the qtek seems to work normal, because if I use the camera button you can hear the "click" sound e.t.c.
What shall I do know? Please help me - I am quite in Panic know .-(
Please anyone?
Did the display cable come loose? You'll have to open the unit in order to rectify this. As I have just ordered a new case, I have searched for instructions how to do this and found
this step by step manual.
Good luck
Robert
Thank you very much for your help - I will try this out. I hope I can open it, because I am not very good in this.
How does the display cable look like?
I got stucked at this step: NOW CAREFULLY LIFT THE BACK COVER AWAY FROM THE FRONT AND NOTE THE SHORT SPEAKER CABLE, USE YOU TWEASERS TO CAREFULLY DISCONNECT IT
How do I disconnect it??
What exactly does the device do? Does it respond to charging? Does the screen have any response to being switched on?
The qtek works properly - that means I can use the com button and touch the screen where eg the bluetooth used to be and I can turn it on.
The camera button works too, because you can hear the click when taking a photo.
The only thing is, that you can only see vertical colored stripes on the screen that change their color after some minutes.
I just opened it now, but it did not help.
you have to buy a new one hahahaha
Hello i have an 8525 and my screen turns white when i turn it on sometimes
or it works and starts fading to a different color >.<
need help please
Please please use the search button. The white screen issues have been extensively and often discussed - not a difficult search. In fact I think there's a thread on this page about it. so please use an existing thread.
Thanks
Mike
Hi guys and gals
I have a stock standard Hermes JasJam with standard OEM software.
Sometimes the screen goes white and all the time none of the front facia buttons function.
I can stop the white screen by very gently dropping the unit face down on my desk about an inch and then the screen is normal however the buttons still do not work
Theorys?
Kind regards
John
There are many threads about this. Please use one of them. Here's a prime example:
http://forum.xda-developers.com/showthread.php?t=321163
Mike
Hi,
when my wizard is in portrait mode the screen goes totally white.
when I slide it a little bit(towards landscape mode) the picture comes back, but if I slide it again towards portrait mode it goes white again.
I tried soft/hard reset and it is still the same.
in bootloader screen it is the same: when the screen is closed(meaning all the way towards portrait) the screen is white and when I slide it a little bit the 3 color screen appears...
b.t.w I don't think it has to do something with the rom cause every thing was alright till recently
Does any one know what I need to do?
Thanks
Alon
Please anyone...it's getting worse.
now I can only see the screen somewhere in the middle between portrait and landscape mode...
I went to the store and the guy said he thinks it's the flat cable...is it expensive?is it hard to fix it alone?
I agree that it is probably the ribbon/flat cable (called an FPC cable in the guide below), but I don't really know anything about disassembling the phone/fixing it.
This post has links to a disassembly/reassembly guide which may or may not help:
http://forum.xda-developers.com/showthread.php?t=333715&highlight=disassemble
http://www.megaupload.com/?d=BEG0XKM8
And a mirror
http://www.megaupload.com/?d=E11DVNQC
Reply With Quote
Click to expand...
Click to collapse