Database Users

bluetrek s2 troubles (bluetooth stack)

Hey guys,
I just upgraded to radio stack 1.21. I still have bluetooth problems.
I've been reading up on this forums, and it seems that people all over are complaining about the bluetooth stack.
Basically, i can only get the 'connectected headset' icon, if i pair the headset again (removing it from the devices list).
It seems rediculous that it won't reconnect as soon as I turn on my bluetrek!
Is there someone with some experience that knows the proper procedure to connect easily??
Many thanks!

funny but I seem to have a similar problem only I am using Rom Version 1.01.00 wwe - radio version 1.00.10
Pairing my BT headset works perfect, the BT headset works great, all is fine until at some point - usually after a soft reset - the BT icon disappears and does not come back even if I click on the connect button on my BT headset.
The only way to bring my BT headset to life with the MDA is to delete the headset from the BT menu and rediscover it and repair it...
This of course is extremely annoying.
Anyone? any solution?

1.5/Cupcake HSP (Phone) Bluetooth Problem -- any suggestions?

So... I've been very hesitant to post this here.
I originally updated to the Haykuro sapphire port some two weeks ago; I have since then tried the "Dude" mod, and the JF ADP 1.5 mod as well.
They all have exactly this same problem: My Lubix LC1 stereo bluetooth headset no longer works properly with the G1. The phone //says// it is connected with both the A2DP (music) and the HSP (phone) protocols; and the A2DP connection works perfectly. But the HSP connection is essentially non-existent, despite the phone saying it is connected under "Bluetooth Settings".
When I try to call someone w/ the phone, the audio is routed to and from the phone itself. There is no way to route the call to the bluetooth headset at all. This problem has persisted through all three versions; I have flashed and re-flashed, etc.
I have gone through two LC1 bluetooth headsets (a mishap with a rather large, rather bored dog.) They both behave in exactly this same way.
The bluetooth is working w/ my wife's Jabra 855 headset. And it worked perfectly fine in the 1.1 and 1.0 firmwares.
So... what's the deal? I'm not enough of a "computer-person" to know how to hack this myself, but if there were a way to port the 1.1 firmware's bluetooth profile to the 1.5 software, that would be awesome.
Much as it's nice to listen to music through the G1, that's not useful at the expense of the headset.
Is my only choice, if I want the 1.5/cupcake firmware, to //REALLY// purchase a new bluetooth headset thanks to the reversion/breaking caused by the Cupcake update itself?
Please help!

each new major upgrade version also comes with a matching radio firmware.
you only upgraded the system image - leaving the device unsynced with the radio image. Its a known issue. once you will upgrade your radio image most of your problem will go away.
radio image for Cupcake 1.5 can be downloaded from official HTC website.

No, I updated the radio. It had no effect on this problem whatsoever. I've done a clean downgrade/upgrade with each of the various 1.5 mods.
This is a problem with the 1.5 software. Even w/ the 1.5's radio and the JF 1.42 mod the LC1 worked perfectly.

No Devices Found
I have the most recent firmware, baseband, etc, but when I search for devices, it never finds any Bluetooth Devices.

Silly question -- but have you been putting those devices into pairing mode?

I am having the same exact problem with my BlueAnt V1 bluetooth headset. With the latest 1.5 builds across the board with the exception of the UK version that released a week ago I cannot use my bluetooth headset at all. It goes through the pairing as normal and shows connected (I even get the jazzy blue outline in the dial screen) but no audio to the headset what so ever same with my Car kit. What changed in the latest builds to the bluetooth profile?

you are not alone, same problem here with German G1 and Cupcake. It does pair with my navigation system and/or Motorola HF800. My navigation system can access the phone, read phone book and dial - but I do have no sound. Incoming calls do ring on the navigation system/headset, but if I pick up the call there is no audio connection. Any idea what to do?
Actually I consider to root and flash e.g. JF firmware hoping that this will bring any change. On the other site I am afraid that this is just waste of time and risk. Strange thing is that there are obvioulsy not many people with same problem, though they do exist and report same problem in various forums.

I have the same exact problem as well. My car radio has bluetooth HSP and A2DP. The A2DP works perfectly but when I dial a call, the HSP doesn't work. However, when I receive a call, it works. Also, I discovered if I disconnect the A2DP profile in the bluetooth settings on the phone, HSP works correctly.

opposite problem- HSP good but A2DP no good
I have the opposite problem as testing567. Phone shows it is paired for voice and media and so does my car (2009 Mazda6). AFAIK when I select AUX on my stereo; it should automatically start the music player on the phone, but it doesn't. When I manually open Music and play a song; it does not output on the phone's speaker nor the car stereo. Weird thing is that when the song is playing; the progress bar shows it playing very fast like it is skipping every 2-3 seconds. As soon as I turn the car off and the bluetooth disconnects; the song automatically resumes playing through the phone's speaker at a normal speed. I do not have another bluetooth audio device to test this with, so I am not sure if it is the car or the phone. No problems with bluetooth phonecalls. My cupcake is the official OTA release and as far as I can tell the radio is up to date (Baseband Version 62.50S.20.17H_2.2219.26I).

Im having the same problems, my bluetooth is paired and when i get a call my bluetooth rings, if i press it once to answer it goes straight to the phone, but if i press it twice i get the audio on my bluetooth. It sucks that you have to press twice just to be able to use your bluetooth. (Try it. Pair your Bluetooth, call yourself with another phone, and answer it by pressing twice on your bluetooth answer button.)

I had the same issue exactly as you describe.
I downloaded the 1.5 Radio version off HTC's website and everything works again
HTH
Smiffy.

Lordsmiff said:
I had the same issue exactly as you describe.
I downloaded the 1.5 Radio version off HTC's website and everything works again
HTH
Smiffy.
Click to expand...
Click to collapse
what's your radio (baseband) version?
mine is Baseband Version 62.50S.20.17H_2.22.19.26I and it takes 5-10 minutes for my already-paired parrot evo 3k to connect when my car turns on.

Bluetooth and S9 issues on 2.73 ROM

Hi
I have the T-Mobile G2 Touch and a Motorola S9 headphones. Using the Origianl Stock T-Mobile ROM i have had no issues with bluetooth.
BUT
using the generic 2.73 ROM i have issues with connecting to the headset
It will connect, then instantly disconnect, then try to connect again, at which point it fails to connect properly
To Reproduce:
Using a HTC Hero & 2.73 ROM
Pair your S9's with the Hero
then Turn off the S9's and Bluetooth
Then turn on Bluetooth, and the S9's with the Bluetooth Settings up
you will see it say "Connected with Media", "Paired but not Connected", then "Connecting......." at which point it will fail
I have tried all the different radio versions to make sure it isnt a issue with the radio, but the same problem prevails.
Does anyone have any ideas on how to fix this issue? or what is causing it?

I also had issues with an unlocked Hero and a Sennheiser MM200 headset. Worked perfectly on original rom, but very fiddly to setup with the 2.73 rom.
The only way I can get them to work properly with the phone is to:
1) Make sure headset is turned off, as well as bluetooth on phone
2) Turn on headset
3) Then turn on bluetooth on phone
Headset connects as normal - any other sequence doesn't work.

I have tried this, and it doesnt seem to work. I have been trying it for the last hour.
While in Bluetooth Settings it says its connected with media, then is disconnects, then it trys to connect again, and then it just says "Connecting.........." for ages
The Headset light flashes as if it was connected.

I also had problems connecting MM200. I could connect it, but then it kinda stuck when i was pressing play button.
But then i decided to check my old sony ericsson bluetooth headset - it was working normally. And after that the MM200 also was working. One wonders.
Still i've noticed some stuttering problems when song starts. And it seems to start with faster tempo and then slow down after 10 seconds to normal speed (could be related to that stuttering? Trying to compensate for the lost time or something). No issues when i'm listening to wired headphones - so it must either something with hero bluetooth or MM200.
I have to check how it works with my old headset, but i'm kinda afraid of having MM200 connection problems again.

Ok
i will keep playing around. i have some CX-300II coming next week so i have a backup plan if i cant get the bluetooth stuff working properly
Thanks for your help

raywiper said:
I also had problems connecting MM200. I could connect it, but then it kinda stuck when i was pressing play button.
But then i decided to check my old sony ericsson bluetooth headset - it was working normally. And after that the MM200 also was working. One wonders.
Still i've noticed some stuttering problems when song starts. And it seems to start with faster tempo and then slow down after 10 seconds to normal speed (could be related to that stuttering? Trying to compensate for the lost time or something). No issues when i'm listening to wired headphones - so it must either something with hero bluetooth or MM200.
I have to check how it works with my old headset, but i'm kinda afraid of having MM200 connection problems again.
Click to expand...
Click to collapse
I think the speeding up / slowing down and stuttering is more to do with the Hero - I have tried the headset connected to a laptop and there is no problem whatsoever. Hopefully the next Android update will improve the bluetooth problems.

not compatible with new mazda 3
Well the hero is probably the best phone ive had and ive had many many phones over the years including the jesus phone which was pants.
Well ive just bought a new mazda 3 and unfortunately the hero does not like connecting to the car via bluetooth. tried all sorts. sometimes it works but usually only for a couple of times and then manages to lock the car radio up.
So its bye bye hero for me as i need a compatable phone for my car. looks like its back to nokia...shame as i really love the phone

Bluetooth audio streaming is not connecting automatically

Bluetooth audio streaming is not connecting automatically to my car kit (a Parrot MKi9200). The phone connection always sets up automatically as soon as I turn on my car's ignition, but the BT audio streaming never does. To make BT audio streaming work, I have to activate it manually in my phone's menu, each time I start my car. That's just too much on working days where I sometimes get in and out of the car frequently.
Both Parrot and HTC have told me that this functionality simply isn't there in the phone. Other phones can connect automatically, but not this model, so they say.
Is there a work-around? For instance, is there some sort of software utility that could help me automate the establishment of the BT audio streaming connection?

I find that on WM6 you have to reconnect manually in the comm manager to get AD2P to activate. But in some WM6.5 roms (most probably) like the EnergyROM I am using now the AD2P is very responsive and reconnects just by pressing play in HTC audio player even if stopped during the bluetooth connection to your car stereo/kit.
I have tried many AD2P auto software enablers but they eventually just remove the functionality alltogether and has me reflashing the rom. =/
I would suggest either to go with a 6.5 build or just make a habit of reconnection to the BT manually via comm manager if you want to stay with wm6

Must pair headset each time I turn it on

I'm having a new issue with a Plantronics Discovery 975 that worked just fine with my HTC Touch Cruise. With the HTC Touch Cruise I could power off the headset and it would reconnect when turned back on. With the HD2 I have to pair it each time I turn it on.
Anyone have a fix?

try
with the headset connected
settings menu all settings bluetooth select the headset in the list click properties tick connections authorised.

I am having same problem with pairing with my parrot system. This has happened since upgrading the rom on my t-mobile HD2

Thanks. I'll give that a try. I had found that I could go into the Bluetooth settings and See the headset list and could tell it to connect. One little step better than pairing it again. It just seems like that should be the default behavior. Who want to go into the phone each time and tell it to connect the headset?