Hi,
I have a BA device since 3-4 weeks. I've been reading the forum since then and testing a lot of 6 and 6.1 roms.
I didn't find a complete and stable BT stack/software.
Am I missing the right thread ?
WIth the MS stack in 6.1, I can get the handsfree working 100%, the A2DP is connecting but the sound is not acceptable (sound skip each second) and not been able to connect my BT GPS (invalid password).
With the Helmi broadcomm 1.7 stack, I got the A2DP and GPS working, but no handsfree.
Is there any other stack ou patch that can help me ?
By the way, this forum is awesome. I found a lot of great information and softwares.
regards
mik
So far, there is no perfect solution for it.
If there is no perfect solution, is there any solution to make handsfree protocol AND GPS serial to work ? Audio is not mandatory for me but other 2 are.
Related
These stacks I believe are newer than the Widcomm 1.5.0 series
I think Broadcom reset the version 1.0.0
These are Broadcom 1.0.0.3000 and Broadcom 1.0.0.3500
Build 3500 is slightly unstable but newer.
These came from an i-mate patch for a PDA2K.
DO NOT USE on an i-mate PDA2K (get the orginal unhacked ones from Club i-mate).
I removed files specific to that phone and basically left just the BlueTooth stack.
Recommend a HARD RESET before installing.
I've tested theses patches on a Sprint PPC-6601 (Blue Angle CDMA phone).
Do not do a restore of a backup before or after installing this because it may restore incompatible configuration files that may crash. Build 3100 is more robust against this problem.
Hey Bro
These two are for the Qtek 9090/Xda IIs or Xda II?
I am running 2.20CHS translated with Radio 1.18 and have been unable to get this stack to work. Has anyone tried it?
The ones I posted above are hacked by me to work on the CDMA version (Namely Sprint PPC-6601).
The ones referenced in this reply below are the original patches I started with that came from i-mate club. The offical phone name that the patches are for is "i-mate™ PDA2k" (GSM Slide out keyboard). I don't know how well they would work on the Qtek 9090.
Build 3500 http://www.blueridge.net/dereck/bt/PDA2k_Bluetooth_Fix.CAB
Build 3000 http://www.blueridge.net/dereck/bt/new/OEM_WWE_122_008.sa.CAB
Yes, good link but already bad quality with all bluetooth headset.
It's a shame.
It's a shame you don't give more details.
Which phone, which patch and what happened.
Works great on my phone.
I'm using the 3100 patch from the first post in this thread on a PPC-6601 with a HBH-300. Installed on top of a HARD RESET. That has Build 1.0.0.2200.
It's almost working perfect. Once in a great while if I go out of range for a long time I just toggle bluetooth and it reconnects immediately.
Dial Up Networking and Active Sync all work.
No static. No dropouts. Will go to sleep and wake up and still be connected.
I think that the "shame" was not for you but for imate as their patch don't solve all the issues. Maybe only a bad english ?
Tried on Himalaya_SE 2.06...
I'd merged the files from 2.02 and 2.06 and get a fairly stable handsfree, but I saw your files and got greedy... :twisted:
hmmm, it didn't work though. The installation freeze at splash screen after i cold reset the device.
I believe that there are still device specific entries in the cab files, but it's beyond me at this moment. :?
yes sorry. Just bad english because i am french
This website is wonderfull and a lot of information
But i bought a qtek 9090 (850 euros) and i realize that they sell some device with a lot of bug
Here is my qtek config
qtek9090
Patch fr bt 3000 or 3500 (it's the same : they are bugs both for headset quality)
Windows mobile 2003 SE 4.21.1088 build 14132
rom 1.12.20 FRE
radio rom 1.02.00
ext rom 1.12.146 FRA
Ericson 300 works good but it's too big for me. I am not robocop
But each headset i have tested with bt 3000 and 3500 becomes bad when you stay more than 1 metter from your device. There is scrashesssssssssss in the headset. You have to stay front of the device (in car for exemple) and it works perfectly.
But when i work the pda stay in my bag or other place then quality is horrible
That's why i said it's a shame from imate.
I think there is a defect on this device. I don't know what can i do to increase the audio quality when you stay far from the PDA.
If somebody can help me ????????
But i can see that everybody have the same problem and can't solve it.
Waiting for another ROM. HIHIHIHIHIHIHI they are mad to sell this device like this.
If somebody can find bt 3500 patch from imate in french i am very interested.
Thanks to everybody from xda developer : a great site
yes sorry. Just bad english because i am french
This website is wonderfull and a lot of information
But i bought a qtek 9090 (850 euros) and i realize that they sell some device with a lot of bug
Here is my qtek config
qtek9090
Patch fr bt 3000 or 3500 (it's the same : they are bugs both for headset quality)
Windows mobile 2003 SE 4.21.1088 build 14132
rom 1.12.20 FRE
radio rom 1.02.00
ext rom 1.12.146 FRA
Ericson 300 works good but it's too big for me. I am not robocop
But each headset i have tested with bt 3000 and 3500 becomes bad when you stay more than 1 metter from your device. There is scrashesssssssssss in the headset. You have to stay front of the device (in car for exemple) and it works perfectly.
But when i work the pda stay in my bag or other place then quality is horrible
That's why i said it's a shame from imate.
I think there is a defect on this device. I don't know what can i do to increase the audio quality when you stay far from the PDA.
If somebody can help me ????????
But i can see that everybody have the same problem and can't solve it.
Waiting for another ROM. HIHIHIHIHIHIHI they are mad to sell this device like this.
If somebody can find bt 3500 patch from imate in french i am very interested.
Thanks to everybody from xda developer : a great site
Note that I attached to the first post of this thread Build 3500 release 124 of the i-mate patch stripped down for use on PPC-6601 and VZ6600.
BT problems
Just installed the 3500 fix.
It improves slightly on the Jabra 250, but not enough to actually use it.
It Stabilized the connection between my Holux GR230 GPS and the Qtek 9090.
Hope there will be a better fix.
Try to look at the connection, problem with the Jabra is that it fluktuate from just right to zero every other second.
Nice to pay 800 Euro for something that do not work :shock:
I've added new patches to this the start of this thread.
They work primarily on PPC-6601. Read the attached notes.
Hi mswlogo,
Can you help me if you know which version works on a win2003se translated from chinees on himalaya?
Thanks
That phone is quite different.
I think some other folks are working trying to get this stack working on other phones like yours.
Most of the patches above have registry scripts run in them that will very likely not work on your phone.
The other patches assume you are already running late version BroadComm Stack.
I have HP hx4700 and the Widcomm version is 1.5.0 Build 2000
which one is newest?
That's a really good question.
I'm amazed to see BroadComm on 1.5 instead of WidComm.
What are the dates on the bluetooth files \windows\bt*.*
They are generally around 12/9/2004
It's hard to say what BroadComm and the venders are doing here.
Bluetooth stack on h6315
I just found a new bluetooth stack from:
http://www.ppcw.net/?itemid=2210#cmt9543
Installed on my t-mobile h6315. Device was previously inoperable with bluetooth headset. Device would go into power standby mode, and if bluetooth was running when it went to sleep, it would freeze requiring a soft reset. Now device wakes on power button, with bluetooth running, as it's supposed to. Device also wakes on incoming call, reconnects headset in less than 1 second, and allows me to answer call on the headset buttons. All other headset functions are working as designed, and sound quality seems good. My headset is plantronics 2500. Also, this stack adds a profile in the list for A2DP (??) high quality stereo headphones. Don't have any of these headphones, so don't know if this works on the h6315. Also, don't know if this is the same Broadcom/Widcomm stack you guys have been working with.
Installation is straightforward - put it on the device and tap it. Reset, delete existing device pairings, re-establish the device pairings, and you're ready to test.
All that patch is supposed to do is add two new bt profiles to the pda2k.
* High-Quality Audio support (A2DP)
* Keyboard support (HID)
I'm slightly suprised you got a performance gain out of it.
h6315
It's definately fixed the problems with my device hanging when it goes into standby with bluetooth running and the headset connected.
Now my question is should I install the build 3500 for the 6315 listed above? It appears to be a newer release than this. Any thoughts as to the differences? I'm having a hard time following from the thread as to all the other changes that are in this .cab, and why they are there? Can any one help summarize that?
Hi I've been looking through the forum for the last couple of days and I'm really impressed by the great tips and downloads etc.
Anyway I have a question regarding the Bluetooth configuration /connectivity options available on the S110. In comparison to my other devices the Bluetooth on the S110 sucks.
So I'd like to install the Widcomm version, I've tried the bluetooth_GPS.cab but it fails to initialise the bluetooth stack, so the question is has anyone been able to install and overwrite the current Bluetooth on the Magician?
Any help will be greatly appreciated!
sorry to inform u that the Widcomm Bt stack does not work on the Magician
there is another Bt stack made By toshiba ( for it's own PPC ) and it works on the Magician and adds alot of new profiles missing from the M$ stack , but it's not stable.
I guess I M$ Stack sucks, but you'll get used to it...
cheers
Do anyone have working widcom stack for artemis? I read in helmi's universal forum that it could be done via some reg changes. Made it anyone working. I'm gonna give it a try. Keep fingers crossed
didn't have time to try everything.
download
KING HELMI_C's widcomm stack
install
ad following registry entries:
Code:
unfortunately too long post :mad: so check the .reg included
I just finished so far I tried
filetransfer Orbit <> Universal works
AD2P (or whats name bt stereo) Orbit<> Moto HT820
AVPRC (or whats name remote control - next,previous,pause,play) Orbit<> Moto HT 820 (using m$hit media player) works
PAN not yet
Headset not yet.
regfile included.
to Helmi: I posted this in artemis upgrade forum as well
please feel free to post or PM or mail me any bugs.....
BTW: I'm using O2 Orbit - Arte200
Sorry for noob question ... but what is the difference betwin Original one and Widcom?
Cheers ...
check menneisys (soory for misspelling) posts somewhere in General/networking
it has more bt profiles at least
pnsnake:
Are you with helmi also working on this hack?
Your widcom stack made for universal works on artemis as well?
Do I simpy follow the same procedure described by you on the link specified by you?
Apps such as Sniper, which require widcom/broadcom stack, will work on Artemis, as with MS stack it is not?
For newbies here is the article from pocketpcmag.com blog about the difference:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1649&more=1&c=1&tb=1&pb=1#more1649
dont know, i'm just trying to port it for arte, my Universal is running with Widcomm, so i decided to port it to my Orbit.
So far A2DP,AVCPR is working, file transfer, serial port are working. Headset profile not yet. I'm still trying to figure it out. Maybe Helmi will help.
so far i can transfer all sound from phone to my moto ht820 but not yet phonecalls
Tnx for quick reply. Guess I will try it out. I hope it is easy to remove it and come back to default settings (ms stack). I don't need bluetooth profiles, neither plan on using bt earphones.
File transfer (both ways), bluetooth sync and modem are indeed required. Hope it works.
I have a big problem. I tried this stack and bluetoothe works fine but GPS stoped working. If I uninstall it and try to activate MS Bluetooth stack, bluetooth stops working. So I have to decide: Bluetooth or GPS.
Is there any possibility to reactivate the MS Bluetooth stack?
Ah, I do have WM6 btw...
I was looking at a fix to get my car working with my WM6 Artemis, and thinking of trying the Widcomm stack. However, reading through this thread am I right in understanding that this version of the Widcomm stack won't yet support hands-free kits anyway?
When I run Tomtom6 with my Emtac BT GPS,it works perfectly.
When I use my headset motorolla HP500, it works perfectly.
But when I launch my headset when using tomtom6,it always disconnects the GPS.
Coud someone help me,please?
I have the same problem with the original WM6 of Helmi.
I'm using the same ROM as you. Does anybody have this problem with the others ROMs?
Other roms have same problem！
HKLM\Comm\BTPAN1\Parms\MaxConnections maybe ? =)
slowmouse said:
HKLM\Comm\BTPAN1\Parms\MaxConnections maybe ? =)
Click to expand...
Click to collapse
No dice, I changed it from 1 to 2 and same results. It has been this way with every 6.x ROM I have flashed. Still waiting for a solution.
Bt problem
Hi !
And if we change the bluetooth broadcomm stack ? it was only an idea ....
Tamage
I also tried to increase the maxcommunications value with no success.
I haven't tried the stack software yet because in some posts, I've read that it solved the bluetooth file transfer but not our problem. Maybe I will try but I'm not confident on it.
I'm downloading the 6.1 ROM from PDAviet and will inform you in many minutes about my result.
Unfortunately, it's the same result with the 6.1ROM from PDAViet
I think that there isn't a solution for this problem...it's a limit of BT stack of BA.
No,it's not due do the BT stack of the BA because it runs perfectly with the original WM2003SE. It should be due to a BT different management from the OS WM5 and 6.
syl202gas said:
No,it's not due do the BT stack of the BA because it runs perfectly with the original WM2003SE. It should be due to a BT different management from the OS WM5 and 6.
Click to expand...
Click to collapse
Well it didn't run "perfectly"on WM2003SE. It also was a main problem on that OS too. Especially in receiving calls. The opposite site wasn't heard!
viscocesco said:
I think that there isn't a solution for this problem...it's a limit of BT stack of BA.
Click to expand...
Click to collapse
I presume you meant to say a limit of the BT hardware in the BA not the stack as the stack is software. This is a known bug in the WM5/6/6.1 ROMS, multiple connections works fine in WM2003SE but not in the hacked ROMS.
On my MDA3 it works fine, BT GPS and BT Headset together.
Have a look here.
But sound ist only working on phone, the voice/sound from navi won't come.
I tried BTAudioToggle but all I got was random noise.
Greets Rossi
syl202gas said:
When I run Tomtom6 with my Emtac BT GPS,it works perfectly.
When I use my headset motorolla HP500, it works perfectly.
But when I launch my headset when using tomtom6,it always disconnects the GPS.
Coud someone help me,please?
Click to expand...
Click to collapse
Install Broadcom 1.7
Hi,
i have a new JVC car radio (AVX33) with builtin Bluetooth and a Bluetooth GPS Mouse. Everything work fine also A2DP stereo but only one at time When my BA (with last Explode Rom) is connected to the radio and i want navigate with TomTom or any other programm i cant connect to the GPS mouse.
Disconnect the Radio, the GPS Mouse worked fine but when i reconnect the radio, it disconnect the GPS mouse.
Is there any way to use both at the same time?
Thanks,
tasar
It seems that all BA WM6 (6.1) ROM do not manage correctly multiple connections with BT devices at the same time. There is no way, for example, to grant BT ActiveSync connection while connected to a stupid BT hearphone (or to a GPS unit, as in your example).
I will downgrade to WM 2003 very soon...
Not good to hear But when i go back to 2003 i cant play music over BT,right? No A2DP with 2003?
Is this a problem form the BA or from WM6? I tkink to buy another PDA (which?) but when there is the same problem, i can keep my BA.
Tasar
Correct Mixture can be possible
Unfortunately, the current answer is a mixture between the WWE os and BT Software with know sacrafice.
My current build is: BA 5.2.19202 with MS BT
This is the current issue that you are defining.
Previous build:
TouchFlo 5.2.1938 with Broadcom 1.7.1
This allows the use of BT GPS and A2DP stereo at the same time.
Unfortunately it is at the cost of the phone feature. If you pair the headset feature of the of the stereo device, it will always choose the headset and not A2DP.
So the end question is: what enviroment do you want. A phone pda or pda
One final issue: The Broadcom 1.7.1 software does not work with all os. My 5.2.1902 will not work and the uninstall restores an older version of the MS BT with problems. I ended up reflashing the device.
aerotrike said:
So the end question is: what enviroment do you want. A phone pda or pda
Click to expand...
Click to collapse
What a question Of course i want a Phone PDA!
But is the Bluetooth Problem an BA problem or a WM6? I think to buy another/newer PDA but when this is an WM6 Problem i can keep my BA.
Tasar
Push this to top again.
Is there a solution for this problem...?
I want to connect my BA (WM6) to a BT-Mouse and to a BT-Headset (mono) at the same time. Does this cause any Problems, or does it work...?
Greets Rossi
You should try; i connect my BT-GPS receiver and my BT-headset in the same time, with no problems.
Can you tell which GPS and Headset, and what are youre settings...?
I tried with these and it won't work:
- Navilock BT-348 Bluetooth GPS
- MIDLAND Rider Bluetooth Headset
Which version of WM6, eg. HELMIs...?
Greets Rossi