Hello to all. I made a bad mistake with my german mda compact. Now is on start screen just serial v 1.00 or usb v 1.00
But i'am an absolut newbie and i found only howto's to change from german to english or italian. I think, all i need is the german original rom to update thru a sd card. Could anybody help me out? I promise, i never will play with this MDA ;-) thanks...Guido
Guido K said:
Now is on start screen just serial v 1.00 or usb v 1.00
Click to expand...
Click to collapse
I had the same problem yesterday.
Do a soft reset.
You probably didn't overwrite the header properly or you're using a bad ROM.
27 said:
Guido K said:
Now is on start screen just serial v 1.00 or usb v 1.00
Click to expand...
Click to collapse
I had the same problem yesterday.
Do a soft reset.
You probably didn't overwrite the header properly or you're using a bad ROM.
Click to expand...
Click to collapse
I tried to use a update for MDA II. It started, told me wich Version is in MDA, which version will be installed.It starts proper, wrote me: Wrong Handy and finish. Since this i just have a nearly dark grey display with this words as described.
Were you trying the Imate Rom or English T-Mobile ROM?
27 said:
Were you trying the Imate Rom or English T-Mobile ROM?
Click to expand...
Click to collapse
I tried now nothing. I thougt the XDA II soft is ok for my MDA compact. Since this i just looking for a german Version.
Anonymous said:
27 said:
Were you trying the Imate Rom or English T-Mobile ROM?
Click to expand...
Click to collapse
I tried now nothing. I thougt the XDA II soft is ok for my MDA compact. Since this i just looking for a german Version.
Click to expand...
Click to collapse
OK.
So you tried to load the XDA II ROM on the MDA compact.
And now you have a blank screen.
And both resets are not working?
27 said:
Anonymous said:
27 said:
Were you trying the Imate Rom or English T-Mobile ROM?
Click to expand...
Click to collapse
I tried now nothing. I thougt the XDA II soft is ok for my MDA compact. Since this i just looking for a german Version.
Click to expand...
Click to collapse
OK.
So you tried to load the XDA II ROM on the MDA compact.
And now you have a blank screen.
And both resets are not working?
Click to expand...
Click to collapse
That is right. :?
Did you back up the original ROm fro the MDA?
What language was it?
27 said:
Did you back up the original ROm fro the MDA?
What language was it?
Click to expand...
Click to collapse
no....before i made this failure i never heard about the possibility of backing up ROM. I have baclup made with sprite backup. It is on my SD Card. But i think u do not mean this....
Anonymous said:
27 said:
Did you back up the original ROm fro the MDA?
What language was it?
Click to expand...
Click to collapse
no....before i made this failure i never heard about the possibility of backing up ROM. I have baclup made with sprite backup. It is on my SD Card. But i think u do not mean this....
Click to expand...
Click to collapse
German language was installed. and that i need back. Like a virgin...
Anonymous said:
no....before i made this failure i never heard about the possibility of backing up ROM. I have baclup made with sprite backup. It is on my SD Card. But i think u do not mean this....
Click to expand...
Click to collapse
Ok.
Is it possible to load the backup from the Bootlaoder mode?
27 said:
Anonymous said:
no....before i made this failure i never heard about the possibility of backing up ROM. I have baclup made with sprite backup. It is on my SD Card. But i think u do not mean this....
Click to expand...
Click to collapse
Ok.
Is it possible to load the backup from the Bootlaoder mode?
Click to expand...
Click to collapse
I don't know. I think it is just a backup of all installed software...but a exe file called backup_2005-01-15
Anonymous said:
27 said:
Anonymous said:
no....before i made this failure i never heard about the possibility of backing up ROM. I have baclup made with sprite backup. It is on my SD Card. But i think u do not mean this....
Click to expand...
Click to collapse
Ok.
Is it possible to load the backup from the Bootlaoder mode?
Click to expand...
Click to collapse
I don't know. I think it is just a backup of all installed software...but a exe file called backup_2005-01-15
Click to expand...
Click to collapse
I u want we can chat aim : vnetm or skype: koronkai
Anonymous said:
I don't know. I think it is just a backup of all installed software...but a exe file called backup_2005-01-15
Click to expand...
Click to collapse
I'd advise you to find out if it's possible.
http://www.compactjam.com/forum/forum_posts.asp?TID=217
27 said:
Anonymous said:
I don't know. I think it is just a backup of all installed software...but a exe file called backup_2005-01-15
Click to expand...
Click to collapse
I'd advise you to find out if it's possible.
Click to expand...
Click to collapse
I think my card has to be empty. Just this file?
Anonymous said:
27 said:
Anonymous said:
I don't know. I think it is just a backup of all installed software...but a exe file called backup_2005-01-15
Click to expand...
Click to collapse
I'd advise you to find out if it's possible.
Click to expand...
Click to collapse
I think my card has to be empty. Just this file?
Click to expand...
Click to collapse
No...nothing happens at all. Just my known letters : serial v 1.00
Anonymous said:
I think my card has to be empty. Just this file?
Click to expand...
Click to collapse
See if there's any info here
http://www.spritesoftware.com/products/sprite_backup.html
My German ROM is about 900MB. I think it's 'cos I used a 1GB card.
I'll be away from the internet for the next few hours. Maybe you can try using the English ROM.
You need to be logged in to download from this site.
http://www.compactjam.com/forum/forum_posts.asp?TID=53&PN=2
http://www.compactjam.com/forum/forum_posts.asp?TID=252&PN=1
27 said:
Anonymous said:
I think my card has to be empty. Just this file?
Click to expand...
Click to collapse
See if there's any info here
http://www.spritesoftware.com/products/sprite_backup.html
My German ROM is about 900MB. I think it's 'cos I used a 1GB card.
I'll be away from the internet for the next few hours. Maybe you can try using the English ROM.
You need to be logged in to download from this site.
http://www.compactjam.com/forum/forum_posts.asp?TID=53&PN=2
http://www.compactjam.com/forum/forum_posts.asp?TID=252&PN=1
Click to expand...
Click to collapse
okay...i thing i need exact this rom file. But i try to find out whats going on. It was very nice from u to pick me up for a try. Cu and thank u again...Guido
Anonymous said:
okay...i thing i need exact this rom file. But i try to find out whats going on. It was very nice from u to pick me up for a try. Cu and thank u again...Guido
Click to expand...
Click to collapse
You're welcome.
What have you tried? Has it worked?
Is the SD card supported on the JAM ?
Ronv said:
Is the SD card supported on the JAM ?
Click to expand...
Click to collapse
All i can say that the MDAc runs fine with this stuff....
Guido
Seems to be working fine for me....
TNX
Anonymous said:
Seems to be working fine for me....
Click to expand...
Click to collapse
My access point needs an acsii key for WPA, but the sandisk wants a numeric code for WPA ... do you know how to convert between the two?
TIA
Guido K said:
Ronv said:
Is the SD card supported on the JAM ?
Click to expand...
Click to collapse
All i can say that the MDAc runs fine with this stuff....
Guido
Click to expand...
Click to collapse
Will you send us your drivers and installation procedures to help us make it work...?ROM Version?
........................
I'm afride:
1.edition of SPL is high
2.maybe you can try another time.mostly thas's because some interruption during your update
good lucy
first , you should upgrade you SPL edition to 1.09.
....................
pat1 said:
jlum said:
first , you should upgrade you SPL edition to 1.09.
Click to expand...
Click to collapse
How?
Click to expand...
Click to collapse
use "RUU_PATCH" to do this , but you need a NBF file which include SPL1.09 ,"RUU_PATCH" has a wizard to tell u how .
good luck
jlum said:
pat1 said:
jlum said:
first , you should upgrade you SPL edition to 1.09.
Click to expand...
Click to collapse
How?
Click to expand...
Click to collapse
use "RUU_PATCH" to do this , but you need a NBF file which include SPL1.09 ,"RUU_PATCH" has a wizard to tell u how .
good luck
Click to expand...
Click to collapse
Heh, RUU_Patch doesn`t work on Bootloader 2.x. :?
pat1 said:
jlum said:
pat1 said:
jlum said:
first , you should upgrade you SPL edition to 1.09.
Click to expand...
Click to collapse
How?
Click to expand...
Click to collapse
use "RUU_PATCH" to do this , but you need a NBF file which include SPL1.09 ,"RUU_PATCH" has a wizard to tell u how .
good luck
Click to expand...
Click to collapse
Heh, RUU_Patch doesn`t work on Bootloader 2.x. :?
Click to expand...
Click to collapse
really ? sorry i don't know this infomation. use other tool "TyphoonNBFTool" ?
make sure u cellphone can connect to activesync when u use "RUU_PATCH".
and this is the how to http://forum.xda-developers.com/showthread.php?t=386492
more detail please.. help
febelus said:
and this is the how to http://forum.xda-developers.com/showthread.php?t=386492
Click to expand...
Click to collapse
can u explain more details ? i am not really make it work.
by the way. .the xp u install must be tablet version ?
hi all,
i downloaded the last version of radio rom to my polaris...but after that my device cant see my storage card anymore.
wat can i do...
by the way, i tried to hard reset my device but without benefit.
Did you flash it with microSD inside ???
batista70 said:
Did you flash it with microSD inside ???
Click to expand...
Click to collapse
Hi batista since i flash my polaris i never put out my microSD and have not any problem
thanx all 4 taking care...
i reupdate the radio rom & now it's all work out ....
thnx again
pafimal said:
Hi batista since i flash my polaris i never put out my microSD and have not any problem
Click to expand...
Click to collapse
It's suggested to flash without, i don't know why.
smoken said:
thanx all 4 taking care...
i reupdate the radio rom & now it's all work out ....
thnx again
Click to expand...
Click to collapse
I'm glad you solve